Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronic coherence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

A Hydrodynamic Theory for Spatially Inhomogeneous Semiconductor Lasers: Microscopic Approach

Starting from the microscopic semiconductor Bloch equations (SBEs) including the Boltzmann transport terms in the distribution function equations for electrons and holes, we derived a closed set of diffusion equations for carrier densities and temperatures with self-consistent coupling to Maxwell's equation and to an effective optical polarization equation. The coherent many-body effects are included within the screened Hartree-Fock approximation, while scatterings are treated within the second Born approximation including both the in- and out-scatterings. Microscopic expressions for electron-hole (e-h) and carrier-LO (c-LO) phonon scatterings are directly used to derive the momentum and energy relaxation rates. These rates expressed as functions of temperatures and densities lead to microscopic expressions for self- and mutual-diffusion coefficients in the coupled density-temperature diffusion equations. Approximations for reducing the general two-component description of the electron-hole plasma (EHP) to a single-component one are discussed. In particular, we show that a special single-component reduction is possible when e-h scattering dominates over c-LO phonon scattering. The ambipolar diffusion approximation is also discussed and we show that the ambipolar diffusion coefficients are independent of e-h scattering, even though the diffusion coefficients of individual components depend sensitively on the e-h scattering rates. Our discussions lead to new perspectives into the roles played in the single-component reduction by the electron-hole correlation in momentum space induced by scatterings and the electron-hole correlation in real space via internal static electrical field. Finally, the theory is completed by coupling the diffusion equations to the lattice temperature equation and to the effective optical polarization which in turn couples to the laser field.

Li, Jianzhong↗
NASA NTRS2002

Microscopic Foundation and Simulation of Coupled Carrier-Temperature Diffusions in Semiconductor Lasers

A typical semiconductor-based optoelectronic device, such as a diode laser, consists of three subsystems: an optical field, an electron-hole plasma (EHP), and a host crystal lattice. The physics of such a device involves the interplay of optical, electrical and thermal processes. A proper description of such a device requires that all three processes are treated on equal footing and in a self-consistent fashion. Furthermore, since a semiconductor laser has intrinsic spatial inhomogeneity, such a self-consistency naturally leads to a set of partial differential equations in space and time. There is a significant lacking of research interest and results on the transport aspects of optical devices in the literature with only a few exceptions. Even the most important carrier diffusion coefficient has not been properly derived and studied so far for optically excited plasma, while most of the work adopted results from electronics community where heavily doped semiconductors with mainly one type of carriers are dealt with. The corresponding transport equation for plasma energy or temperature has received even less attention. In this talk we describe our recent results on such a self-consistent derivation of temperature and carrier-density diffusion equations coupled with the lasing process. Starting from the microscopic semiconductor Bloch equations (SBEs) including the Boltzmann transport terms in the distribution function equations for electrons and holes, we derived a closed set of diffusion equations for carrier densities and temperatures with self-consistent coupling to Maxwell's equation and to an effective optical polarization equation. The coherent many-body effects are included within the screened Hartree-Fock approximation, while scatterings are treated within the second Born approximation including both the in- and out-scatterings. Microscopic expressions for electron-hole (e-h) and carrier-LO (c-LO) phonon scatterings are directly used to derive the momentum and energy relaxation rates. These rates expressed as functions of temperatures and densities lead to microscopic expressions for self- and mutual-diffusion coefficients in the coupled density-temperature diffusion equations. Approximations for reducing the general two-component description of the electron-hole plasma (EHP) to a single-component one are discussed. In particular, we show that a special single-component reduction is possible when e-h scattering dominates over c-LO phonon scattering. The ambipolar diffusion approximation is also discussed and we show that the ambipolar diffusion coefficients are independent of e-h scattering, even though the diffusion coefficients of individual components depend sensitively on the e-h scattering rates. Our discussions lead to new perspectives into the roles played in the single-component reduction by the electron-hole correlation in momentum space induced by scatterings and the electron-hole correlation in real space via internal static electrical field. Finally, the theory is completed by coupling the diffusion equations to the lattice temperature equation and to the effective optical polarization which in turn couples to the laser field. The equations derived above are implemented in various limiting cases to a typical diode laser to study the consequences of nonlinear diffusion and the cross diffusion terms on laser behavior, especially the dynamic behavior of a diode laser under modulation. Detailed results will be presented by comparing with the standard rate equation results.

Li, J.↗
NASA NTRS1977

Prelaunch testing of the laser geodynamic satellite (LAGEOS)

The LAGEOS was extensively tested optically prior to launch. The measurement techniques used are described and resulting data is presented. Principal emphasis was placed on pulse spreading characteristics, range correction for center of mass tracking, and pulse distortion due to coherent effects. A mode-locked freqeuncy doubled Nd:YAG laser with a pulse width of about 60 ps was used as the ranging transmitter and a crossfield photo-multiplier was used in the receiver. High speed sampling electronics were employed to increase receiver bandwidth. LAGEOS reflected pulses typically had a width of 250 ps with a variability in the range correction of less than 2 mm rms. Pulse distortion due to coherent effects was inferred from average waveforms and appears to introduce less than + or - 50 ps jitter in the location of the pulse peak. Analytic results on this effect based on computer simulations are also presented. Theoretical and experimental data on the lidar cross section were developed in order to predict the strength of lidar echoes from the satellite. Cross section was measured using a large aperture laser collimating system to illuminate the LAGEOS. Reflected radiation far-field patterns were measured using the collimator in an autocollimating mode. Data were collected with an optical data digitzer and displayed as a three-dimensional plot of intensity versus the two far-field coordinates. Measurements were made at several wavelengths, for several types of polarizations, and as a function of satellite orientation.

Fitzmaurice, M. W.↗
NASA NTRS1992

Relativistic, perpendicular shocks in electron-positron plasmas

One-dimensional particle-in-cell plasma simulations are used to examine the mechanical structure and thermalization properties of collisionless relativistic shock waves in electron-positron plasmas. Shocks propagating perpendicularly to the magnetic field direction are considered. It is shown that these shock waves exist, and that they are completely parameterized by the ratio of the upstream Poynting flux to the upstream kinetic energy flux. The way in which the Rankine-Hugoniot shock jump conditions are modified by the presence of wave fluctuations is shown, and they are used to provide a macroscopic description of these collisionless shock flows. The results of a 2D simulation that demonstrates the generality of these results beyond the assumption of the 1D case are discussed. It is suggested that the thermalization mechanism is the formation of a synchrotron maser by the coherently reflected particles in the shock front. Because the downstream medium is thermalized, it is argued that perpendicular shocks in pure electron-positron plasmas are not candidates as nonthermal particle accelerators.

Gallant, Yves A.↗
NASA NTRS1975

The effect of adiabatic focusing upon charged particle propagation in random magnetic fields

Charged particles propagating along the diverging lines of force of a spatially inhomogeneous guiding field were considered as they are scattered by random fields. Their longitudinal transport is described in terms of the eigenfunctions of a Sturm-Liouville operator incorporating the effect of adiabatic focussing along with that of scattering. The relaxation times and characteristic velocities are graphed and tabulated. The particle density is evaluated as a function of space and time for two different regimes. In the first regime (relatively weak focussing), a diffusive mode of propagation is dominant but coherent modes are also dominant. In the second regime (strong focussing), diffusion does not occur and the propagation is purely coherent. This supercoherent mode corresponds exactly to the so-called scatter-free propagation of kilovolt solar flare electrons. On a larger scale, focussed transport provides an interpretation of many observed characteristics of extragalactic radio sources.

Earl, J. A.↗
NASA NTRS1983

Acceleration of hydrogen ions and conic formation along auroral field lines

Electrostatic ion cyclotron turbulence and the formation of ion conics at low altitudes (about 1500 km) along auroral field lines have been investigated analytically and by plasma numerical simulations. Ion cyclotron waves are assumed to be driven unstable by the upgoing cold ionospheric electrons associated with the downward auroral current. When the electron drift speed is comparable to the electron thermal speed, it was found that the large-amplitude (the saturation level is approximately equal to unity) coherent (omega equals the ion gyrofrequency) ion cyclotron waves should exist along auroral field lines at low altitudes extending a few hundred kilometers. Ion conics are associated with ion cyclotron turbulence, and the ion bulk temperature is found to increase by a factor of 10 from the initial ionospheric temperature, while the temperature of the high-energy tail can be as much as 100 times the ionospheric temperature. Theory and simulations are in good agreement.

Okuda, H.↗
NASA NTRS1984

The COSPAS/SARSAT demonstration and evaluation. Results of the first year in the United States

The COSPAS/SARSAT location accuracy, coverage, location probability, 406 MHz message transmission, and image rejection were tested using a commercially available beacon (EPIRB) with modulated, coherent, 121.5 and 243.0 MHz distress signals emitted at a minimum of 75 mW, a 406 MHz EPIRB with electronics designed to meet the international specification for experimental beacons, and a beacon with the same electronics as the other 406 MHz EPIRB, incorporating a floating antenna design. The COSPAS/SARSAT system contributed to 15 out of 33 rescue missions, in which 35 of the 85 lives were rescued. In 10% of the cases the COSPAS/SARSAT system provided the only means of notification, and in 18% it was the first means. Tests show that 121.5 MHz accuracy is adequate, but 406 MHz must improve. The 121.5 MHz location probability is 82%, but ambiguity resolution is inferior to 406 MHz. Performance of both 406 MHz beacons at low elevation angles and in high wave heights is good.

Gilbert, M. E.↗
NASA NTRS2024

Ternary Feldspar Within Felste Clasts From Apollo Impact Melt Breccia 72255

Granitic clasts with unique ternary feldspar compositions have been identified within samples of the layered impact melt breccia from Apollo 17 Station 2 Boulder 1 (72215, 72235, 72255 and 72275), and in a felsite clast from station 3 (73215). These “ternary” compositions seemingly plot within the miscibility gap of the albite-anorthite-orthoclase (Ab-An-Or) system. Feldspars with these compositions have not been identified in terrestrial samples, and equilibrium feldspar compositions from laboratory experiments indicate they would not be thermodynamically stable. Thus, the physiochemical processes involved in forming these unique ternary feldspars remain poorly understood. To better constrain the formation of ternary feldspar within lunar breccias, we have undertaken a coordinated scanning electron microscope (SEM)-based coupled electron backscatter diffraction (EBSD) and energy dispersive spectrometry (EDS), electron microprobe analyzer (EPMA) wavelength dispersive spectrometry, and transmission electron microscopy (TEM) study. The goals of this study are twofold: 1) confirm whether ternary feldspar is present as coherent, single-crystals or sub-microscopic intergrowths of normal compositions, and 2) better constrain the formation conditions of clasts containing ternary feldspar.

T. M. Erickson↗
NASA NTRS1976

Method and apparatus for generating coherent radiation in the ultra-violet region and above by use of distributed feedback

Helium in the superfluid state emits copious amounts of radiation in the ultraviolet region when excited by an electron stream. Conventional laser action using mirrors is impossible in superfluid helium because there are no mirrors that will reflect VUV radiation. By utilizing the distributed feedback method, the superfluid helium can be made to lase. By setting up a standing wave in superfluid helium that has a wavelength equal to, or harmonically related to, half the wavelength of the photon radiation chosen to be emitted as laser radiation by the superfluid helium, the need for end mirrors to produce reflection of the laser radiation is eliminated and reflection occurs instead at the wavefronts of the standing wave. The photons leave the superfluid helium at right angles to the standing wave as coherent radiation having a very high intensity. The standing wave established in the superfluid helium may be an acoustical standing wave, a thermal standing wave (second sound), or an electric standing wave.

Saffren, M. M.↗
NASA NTRS1988

An analysis of whistler mode radiation from the Spacelab 2 electron beam

During the Spacelab 2 mission the plasma diagnostics package (PDP) was released from the Shuttle to free fly. At times during this free flight, when the PDP was magnetically connected to the Shuttle, Stanford's fast-pulsed electron generator, located in the Shuttle cargo bay, ejected a 1-keV 50-mA electron beam. The PDP plasma-wave instrument detected intense whistler-mode radiation during these beam ejections. This paper presents a study of a whistler mode emission detected during one particular continuous electron beam firing. Calculations indicate that the beam radiated approximately 1.6 mW in the whistler mode as the beam traversed the 200 m from the Shuttle to the PDP. The emissivity also decreased by about a factor of 10 over this same distance. The measured wave powers are 10 to the 7th greater than wave powers expected from incoherent Cerenkov radiation, verifying that the radiation is generated by a coherent process. Estimates of the emissivity based on measured electric field intensities in the beam indicate that the whistler-mode noise is produced by radiation from electron bunches created by an electrostatic beam-plasma instability.

Farrell, W. M.↗
NASA NTRS1981

Investigation of the winds and electron concentration variability in the D region of the ionosphere by the partial-reflection radar technique

The development and first observations of the partial-reflection drifts experiment at Urbana, Illinois (40 N) are described. The winds data from the drifts experiment are compared with electron concentration data obtained by the differential-absorption technique to study the possible meteorological causes of the winter anomaly in the mesosphere at midlatitudes. winds data obtained by the meteor-radar experiment at Urbana are also compared with electron concentration data measured at Urban. A significant correlation is shown is both cases between southward winds and increasing electron concentration measured at the same location during winter. The possibility of stratospheric/mesospheric coupling is investigated by comparing satellite-measured 0.4 mbar geopotential data with mesospheric electron concentration data. No significant coupling was observed. The winds measured at Saskatoon, Saskatchewan (52 N) are compared with the electron concentrations measured at Urban, yielding constant fixed relationship, but significant correlations for short segments of the winter. A significant coherence is observed at discrete frequencies during segments of the winter.

Weiland, R. M.↗
NASA NTRS1988

Comparative study of cross-field and field-aligned electron beams in active experiments

Beam-plasma interactions associated with the cross-field and field-aligned injection of electron beams from spacecraft were investigated using a two-dimensional (three velocity component) electrostatic particle simulations. It is shown that the beam properties and plasma response can be characterized well by the ratio between the stagnation time and the plasma response time, which depends on the ratio of the ambient plasma density to the beam density, the beam width, the beam energy, and the spacecraft length. It was found that the beams injected across the field lines tend to lose their coherence after about one or two gyrations due to space-charge oscillations induced by the beam, irrespective of the spacecraft charging. These oscillations scatter the beam electrons into a hollow cylinder of a radius equal to a beam electron gyroradius and thickness of the order of two beam Debye lengths. Parallel injected beams are subjected to similar oscillations, which cause the beam to expand to fill a solid cylinder of a comparable thickness.

Winglee, R. M.↗
NASA NTRS1972

Polarization effects with a combined radar-radiometer

Described is a unique microwave sensor. The device uses a coherent X-band radar, a radiometer at the same wavelength and an antenna with a polarization that can be varied electronically. This microwave sensor was developed to acquire polarization signature information about various surfaces in both the active and passive mode simultaneously. One application for the sensor is expected to be the location and identification of plant life.

Martin, D.↗
NASA NTRS2004

Nobeyama Radio Heliograph and RHESSI Observations of the X 1.5 Flare of April 21, 2002

We present an overview of the microwave (17 and 34 GHz) observations of the X1.5 flare of April 21,2002, along with RHESSI hard X-ray observations. The event lasted more than 2 hours and features a beautiful arcade of rising loops on the limb visible at X-ray, EUV and radio wavelengths. The main flare was preceded by a small event 90 minutes earlier showing a long loop ,connecting well-separated radio and hard X-ray sources. The main flare itself starts with a compact radio and hard X-ray source well inside the solar limb. As the flare proceeds a large set of loops is seen to rise well above the solar limb. Distinct regions of radio emission with very different time behavior can be identified in the radio images, and in particular a peculiar nonthermal source seen in radio and hard X-rays low in the corona at the base of the arcade is seen to turn on 30 minutes after the start of the impulsive phase. At about the same time an extremely intense burst of coherent radio emission is seen from 500 to 2000 MHz: we speculate that this lower-frequency burst is produced by electrons that are accelerated in the nonthermal source at the base of the arcade and injected into the loop system where they radiate plasma emission in the 10(exp 10)/cm(exp 3) density plasma at the top of the arcade of loops.

Kundu, Mukul R.↗
NASA NTRS2014

Design and Development of the SMAP Microwave Radiometer Electronics

The SMAP microwave radiometer will measure land surface brightness temperature at L-band (1413 MHz) in the presence of radio frequency interference (RFI) for soil moisture remote sensing. The radiometer design was driven by the requirements to incorporate internal calibration, to operate synchronously with the SMAP radar, and to mitigate the deleterious effects of RFI. The system design includes a highly linear super-heterodyne microwave receiver with internal reference loads and noise sources for calibration and an innovative digital signal processor and detection system. The front-end comprises a coaxial cable-based feed network, with a pair of diplexers and a coupled noise source, and radiometer front-end (RFE) box. Internal calibration is provided by reference switches and a common noise source inside the RFE. The RF back-end (RBE) downconverts the 1413 MHz channel to an intermediate frequency (IF) of 120 MHz. The IF signals are then sampled and quantized by high-speed analog-to-digital converters in the radiometer digital electronics (RDE) box. The RBE local oscillator and RDE sampling clocks are phase-locked to a common reference to ensure coherency between the signals. The RDE performs additional filtering, sub-band channelization, cross-correlation for measuring third and fourth Stokes parameters, and detection and integration of the first four raw moments of the signals. These data are packetized and sent to the ground for calibration and further processing. Here we discuss the novel features of the radiometer hardware particularly those influenced by the need to mitigate RFI.

radio frequency interference↗