Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Polar cap electron densities from DE 1 plasma wave observations

Electric-field-spectum measurements from the plasma-wave instrument on the Dynamics Explorer 1 spacecraft are used to study the local electron density at high altitudes in the northern polar-cap region. The electron density is determined from the upper cutoff of whistler-mode radiation at the electron plasma frequency. Median density values over the polar cap at L greater than 10 are found to vary from 35.2 + or - 8.5 cu cm at 2.1 earth radii to 0.99 + or - 0.51 cu cm at 4.66 earth radii. The steady-state radial-outflow model is examined for consistency with the observed density profile. A power-law fit to the radial variation of the electron density yields an exponent of - 3.85 + or - 0.32, which for the radial-outflow model implies a flow velocity increasing nearly linearly with incresing radial distance. Comparison of the observed electron densities with theoretical polar-wind densities yields consistent results up to 2.8 earth radii. A comparison of the observed electron densities with low-altitude density profiles from the Alouette II and ISIS 1 spacecraft illustrates transitions in the slope of the profile at 1.16 earth radii and between 1.55 and 2.0 earth radii. The changes in the density profile suggest that changes occur in the basic radial-transport processes at these altitudes.

Persoon, A. M.↗

Experimental investigations of electron density and ion energy distributions in dual-frequency capacitively coupled plasmas for Ar/CF{sub 4} and Ar/O{sub 2}/CF{sub 4} discharges

The electron density and ion energy distribution (IED) are investigated in low-pressure dual-frequency capacitively coupled Ar/CF{sub 4} (90%/10%) and Ar/O{sub 2}/CF{sub 4} (80%/10%/10%) plasmas. The relations between controllable parameters, such as high-frequency (HF) power, low-frequency (LF) power and gas pressure, and plasma parameters, such as electron density and IEDs, are studied in detail by utilizing a floating hairpin probe and an energy resolved quadrupole mass spectrometer, respectively. In our experiment, the electron density is mainly determined by the HF power and slightly influenced by the LF power. With increasing gas pressure, the electron density first goes up rapidly to a maximum value and then decreases at various HF and LF powers. The HF power also plays a considerable role in affecting the IEDs under certain conditions and the ion energy independently controlled by the LF source is discussed here. For clarity, some numerical results obtained from a two-dimensional fluid model are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A temporally and spatially resolved electron density diagnostic method for the edge plasma based on Stark broadening

An electron density diagnostic (≥10{sup 10} cm{sup −3}) capable of high temporal (ms) and spatial (mm) resolution is currently under development at Oak Ridge National Laboratory. The diagnostic is based on measuring the Stark broadened, Doppler-free spectral line profile of the n = 6–2 hydrogen Balmer series transition. The profile is then fit to a fully quantum mechanical model including the appropriate electric and magnetic field operators. The quasi-static approach used to calculate the Doppler-free spectral line profile is outlined here and the results from the model are presented for H-δ spectra for electron densities of 10{sup 10}–10{sup 13} cm{sup −3}. The profile shows complex behavior due to the interaction between the magnetic substates of the atom.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Influence of the electron density on the characteristics of terahertz waves generated under laser–cluster interaction

A theory of generation of terahertz radiation under laser–cluster interaction, developed earlier for an overdense cluster plasma [A. A. Frolov, Plasma Phys. Rep. 42. 637 (2016)], is generalized for the case of arbitrary electron density. The spectral composition of radiation is shown to substantially depend on the density of free electrons in the cluster. For an underdense cluster plasma, there is a sharp peak in the terahertz spectrum at the frequency of the quadrupole mode of a plasma sphere. As the electron density increases to supercritical values, this spectral line vanishes and a broad maximum at the frequency comparable with the reciprocal of the laser pulse duration appears in the spectrum. The dependence of the total energy of terahertz radiation on the density of free electrons is analyzed. The radiation yield is shown to increase significantly under resonance conditions, when the laser frequency is close to the eigenfrequency of the dipole or quadrupole mode of a plasma sphere.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron DENSITY of active region outflows measured by the EUV imaging spectrometer on board HINODE

In order to better understand the nature of active region outflows, the electron density was measured by using a density-sensitive line pair, Fe xiv 264.78 Å/274.20 Å. Because coronal line profiles of the outflow region are composed of a major component with a Doppler shift of ⩽10 km s{sup −1} and a minor component (enhanced blue wing, EBW) blueshifted by up to 100 km s{sup −1}, we extracted EBW from the line profiles through double-Gaussian fitting. We tried applying the simultaneous fitting to those two Fe xiv lines with several physical restrictions. Electron density for both components (n{sub Major} and n{sub EBW}, respectively) was calculated by referring to the theoretical intensity ratio as a function of electron density as per the CHIANTI database. We studied six locations in the outflow regions around NOAA AR10978. The average electron density was n{sub Major}=10{sup 9.16±0.16} cm{sup −3} and n{sub EBW}=10{sup 8.74±0.29} cm{sup −3}. The magnitude relationship between n{sub Major} and n{sub EBW} was the opposite in the eastern and western outflow regions. The column depth was also calculated for each component, which leads to the result that the outflows possess only a small fraction (∼0.1) in the eastern region, whereas they dominate over the major component in the line profiles by a factor of five in the western region. When taking into account the extended coronal structures, the western region can be thought to represent the mass leakage. In contrast, we suggest a possibility that the eastern region actually contributes to mass supply to coronal loops.

79 ASTRONOMY AND ASTROPHYSICS↗

Predicted diurnal variations of electron density for three high-latitude incoherent scatter radars

A high-latitude ionospheric model is used to predict the diurnal variations of electron density which should be observed by the EISCAT, Chatanika, and Millstone Hill incorporated scatter facilities. The calculations take into account a strong convection model without substorms. The provided electron density predictions should be used to obtain an indication of the quantitative differences in measured electron density that are to be expected when the three radars probe the high-latitude ionosphere simultaneously. These differences vary with altitude, latitude, local time, and season, and are associated with the UT dependence of the high-latitude ionosphere which results from the offset between the geomagnetic and geographic poles. It was found that the three facilities should observe the greatest difference in electron density variations in winter.

Sojka, J. J.↗

Validation of Spherically Symmetric Inversion by Use of a Tomographically Reconstructed Three-Dimensional Electron Density of the Solar Corona

Determining the coronal electron density by the inversion of white-light polarized brightness (pB) measurements by coronagraphs is a classic problem in solar physics. An inversion technique based on the spherically symmetric geometry (spherically symmetric inversion, SSI) was developed in the 1950s and has been widely applied to interpret various observations. However, to date there is no study of the uncertainty estimation of this method. We here present the detailed assessment of this method using a three-dimensional (3D) electron density in the corona from 1.5 to 4 solar radius as a model, which is reconstructed by a tomography method from STEREO/COR1 observations during the solar minimum in February 2008 (Carrington Rotation, CR 2066).We first show in theory and observation that the spherically symmetric polynomial approximation (SSPA) method and the Van de Hulst inversion technique are equivalent. Then we assess the SSPA method using synthesized pB images from the 3D density model, and find that the SSPA density values are close to the model inputs for the streamer core near the plane of the sky (POS) with differences generally smaller than about a factor of two; the former has the lower peak but extends more in both longitudinal and latitudinal directions than the latter. We estimate that the SSPA method may resolve the coronal density structure near the POS with angular resolution in longitude of about 50 deg. Our results confirm the suggestion that the SSI method is applicable to the solar minimum streamer (belt), as stated in some previous studies. In addition, we demonstrate that the SSPA method can be used to reconstruct the 3D coronal density, roughly in agreement with the reconstruction by tomography for a period of low solar activity (CR 2066). We suggest that the SSI method is complementary to the 3D tomographic technique in some cases, given that the development of the latter is still an ongoing research effort.

corona↗

High-Altitude High-Latitude Electron-Density and Magnetic-Field Enhancements Observed during Magnetic Storms - Including the Storm of 17 April 2002

In addition to the spectacular remote measurements from the Imager for Magnetopause-to-Aurora Global Exploration (IMAGE) satellite [Burch, Space Sci. Rev., 2003], the Radio Plasma Imager (RPI) on IMAGE had the capability of making accurate magnetospheric local electron-density and magnetic-field determinations in addition to obtaining remote electron-density profiles [Reinisch et al., GRL, 2001; Benson et al., JGR, 2003]. These determinations were made using interleaved passive and active modes of operation of the RPI; the former were used to produce dynamic spectra and the latter to produce plasmagrams during active sounding. The plasmagrams of particular interest in this investigation were produced during the apogee (8 RE) portion of the IMAGE orbit when the RPI often operated in a high-resolution mode (300 Hz frequency steps) designed for accurate frequency measurements of sounder-stimulated plasma resonances. Here we present examples from 2001 and 2002, when the IMAGE apogee was at high latitudes, of large increase the electron density and magnetic-field intensity (relative to quiet control conditions) during magnetic storms. During the 17 April 2002 storm, the electron density increased by about a factor of 4 and the magnetic-field intensity increased by nearly a factor of 2. During the much larger storm of 31 March 2001, the RPI data presented in Osherovich et al. [2007] indicates that the electron density increased by about a factor of 10.

Benson, Robert F.↗

Measurement of electron density in complex plasmas of the PK-3 plus apparatus on the International Space Station

Dust particles in discharge are often levitated in a sheath region rather than in bulk plasma under gravitational conditions (on Earth). Gravity compresses dust clouds, and the gravitational force restricts the motion of the dust particles. Microgravity gives the plasmas, including dust particles, so-called complex (dusty) plasmas, where dust particles are embedded in a completely charge-neutral region of the bulk plasma. The dust cloud, as an uncompressed strongly-coupled Coulomb system, corresponds to an atomic model with physical phenomena, e.g., crystallization, phase transition, and so on. Since the phenomena are tightly connected to plasma states expressed by plasma parameters, it is significant to estimate the plasma parameters, such as electron density and temperature. The present work shows the electron density measured by the frequency shift probe in the apparatus for microgravity experiments currently boarding on the International Space Station (PK-3 plus). The frequency shift probe measurement gave electron density in the order of 10{sup 8} cm{sup -3} as a typical value in the apparatus, and demonstrated the detection of electrons in plasmas with dust particles. The spatial distribution profile of the electron density obtained in this measurement presents an aspect for the void formation of dust clouds under microgravity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron density distribution in the magnetosphere

Eight months of differential potential measurements from the POLAR satellite were used to study the electron density distribution in the magnetosphere and its dependence on the level of geomagnetic activity identified by the Kp index. The differential potential measurement is directly proportional to the electron density, and this technique can be used for detecting fast electron density variation in low-density plasmas with a good accuracy. The inner magnetospheric regions are particularly investigated in this study. The cusp is found to be denser during low Km, and it moves equator-ward with increasing Km. The plasmapause is quite asymmetric, as expected. In particular, on the nightside, the plasmapause is compressed closer to the earth with increasing Kp. While the density gradients at the dayside plasmapause are usually not very steep, they can be quite large at other time sectors. A particularly pronounced sharpening of the plasmapause occurs at the dusk sector with increasing Kp. The density in the region between the dayside plasmapause and magnetopause is relatively high during all Kp levels; the average densities are several electrons per cubic meter. During disturbed periods, the density in the near-earth plasma sheet near midnight increases and becomes higher than the densities towards the flanks of the plasma sheet.

Laakso, H.↗

Real-time reconstruction and control of pedestal-top electron density using RMP and gas puff at KSTAR

We report the experimental results of controlling the pedestal-top electron density by applying resonant magnetic perturbation (RMP) with in-vessel control coils and the main gas puff in the 2024-2025 KSTAR experimental campaign. The density is reconstructed using a parameterized $ψ_N$ grid and five channels of line-averaged density measured by the two-colored interferometer (TCI). The reconstruction procedure is accelerated by deploying a multi-layer perceptron to run in approximately 120 µ s and is sufficiently fast for real-time control. A proportional-integral controller was adopted, with the controller gains estimated from the system identification procedure. The experimental results demonstrate that the developed controller can follow a dynamic target while exclusively using both actuators. The absolute percentage errors between the electron density at $ψ_N$ = 0.89 and the target were approximately 1.5% median and a 2.5% average, respectively. The developed controller can even lower the density by using the pump-out mechanism under RMP, and it can follow a more dynamic range of density targets than a single actuator controller. The developed controller will enable experimental scenario exploration within a shot by dynamically setting the density target or maintaining a constant electron density within a discharge.

EFIT↗

Imaging electron-density fluctuations by multidimensional X-ray photon-coincidence diffraction

The ultrafast spontaneous electron-density fluctuation dynamics in molecules is studied theoretically by off-resonant multiple X-ray diffraction events. The time- and wavevector-resolved photon-coincidence signals give an image of electron-density fluctuations expressed through the four-point correlation function of the charge density in momentum space. A Fourier transform of the signal provides a real-space image of the multipoint charge-density correlation functions, which reveal snapshots of the evolving electron density in between the diffraction events. The proposed technique is illustrated by ab initio simulations of the momentum- and real-space inelastic scattering signals from a linear cyanotetracetylene molecule.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Gas temperature and electron density profiles in an argon dc microdischarge measured by optical emission spectroscopy

Optical emisssion spectroscopy was employed to study a high pressure (100 s of Torr), slot-type (600 {mu}m interelectrode gap), argon dc microdischarge, with added traces of nitrogen. Spatially resolved gas temperature profiles were obtained by analyzing rovibrational bands of the N{sub 2} first positive system. The gas temperature peaked near the cathode and increased with current. The contribution of Stark broadening to the hydrogen H{sub {beta}} emission lineshape was used to extract the electron density. The axial distribution of electron density as well as visual observation revealed that the microdischarge positive column was highly constricted. The electron density near the sheath edge increased with both pressure and current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

THE ELECTRON DENSITY IN EXPLOSIVE TRANSITION REGION EVENTS OBSERVED BY IRIS

We discuss the intensity ratio of the O iv line at 1401.16 Å to the Si iv line at 1402.77 Å in Interface Region Imaging Spectrograph ( IRIS ) spectra. This intensity ratio is important if it can be used to measure high electron densities that cannot be measured using line intensity ratios of two different O iv lines from the multiplet within the IRIS wavelength range. Our discussion is in terms of considerably earlier observations made from the Skylab manned space station and other spectrometers on orbiting spacecraft. The earlier data on the O iv and Si iv ratio and other intersystem line ratios not available to IRIS are complementary to IRIS data. In this paper, we adopt a simple interpretation based on electron density. We adopt a set of assumptions and calculate the electron density as a function of velocity in the Si iv line profiles of two explosive events. At zero velocity the densities are about 2–3 × 10{sup 11} cm{sup -3}, and near 200 km s{sup -1} outflow speed the densities are about 10{sup 12} cm{sup -3}. The densities increase with outflow speed up to about 150 km s{sup -1} after which they level off. Because of the difference in the temperature of formation of the two lines and other possible effects such as non-ionization equilibrium, these density measurements do not have the precision that would be available if there were some additional lines near the formation temperature of O iv.

79 ASTRONOMY AND ASTROPHYSICS↗

Electron density depletions in the nightside auroral zone

Dynamics Explorer 1 measurements are used to investigate regions of low electron density in the nightside auroral zone. Sharply defined regions of low electron density are found in auroral zone crossings from the predusk hours until the early morning hours at all radial distances up to at least 4.6 earth radii. Densities in the auroral cavity are shown to fall to values below 0.3/cu cm. Within the auroral cavity, electron-density-profile variations of a factor of 2 or more on spatial scales of tens of kilometers are found, and the electron plasma frequency to electron cyclotron frequency ratios are 0.02-0.4. The results suggest associations between the density depletions in the nightside auroral zone and auroral acceleration processes.

Persoon, A. M.↗