SEARCH · Engineering Papers

Results for “electrochemical process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Intermediate-Temperature Proton Exchange Membranes Based on Cerium Ultraphosphate Composited with Polybenzimidazole

This paper reports the rational fabrication and structural, thermal, mechanical and electrochemical characterization of a new type of intermediate-temperature (IT) polymer-inorganic composite (PIC) proton exchange membranes (PEMs) that are made of cerium ultraphosphate (CeP 5 O 14 —CUP) as the solid-state proton conductor composited with a high-temperature (HT) polybenzimidazole (PBI) as the polymeric binder. Here, flexible PBI-CUP PIC membranes with the thickness of ~135 μ m and CUP mass fraction of up to 75% were prepared by solution-casting without additional acid-doping (e.g., phosphoric acid). The proton conductivity of the fabricated IT-PIC-PEMs was up to 5.80 × 10 –2 S cm –1 as measured from a prototype IT PEM fuel cell (PEMFC) operated at 200 °C in the humidified hydrogen and air environment. This type of IT-PIC-PEMs also demonstrated sufficient mechanical strength and flexibility, excellent thermal stability (up to 350 °C), and very good durability of the proton conductivity (within the test duration of 500 h). The present experimental study shows the promising future of the IT-PIC-PEMs for applications in various IT electrochemical processes including IT-PEMFCs, IT-electrolyzers, etc.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Electrolysis in Chloride Molten Salts for Sustainable Critical Metals Production and Recovery

Critical materials, such as rare-earth metals, are essential to numerous applications, including clean energy; however, the present industrial practices for producing rare-earth metals involve environmentally damaging and thus unsustainable chemical and electrochemical processes. An alternative moderate-temperature chloride-based molten salt electrolysis process can address these issues, providing energy efficient and sustainable metal production. While it is being developed presently for rare-earth electrowinning, one can easily envision its broader application to rare-earth electrorefining and the electrolytic production of high-volume metals like Fe and Al. Presently, these high-volume metals industries account for nearly 10% of global greenhouse gas emissions. Furthermore, the chloride MSE process presents a huge opportunity for truly achieving sustainability if it is developed further for producing Fe, Al, Ti, Mg, and other commodity metals.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Development of Operando Nuclear Magnetic Resonance Capabilities for Solid-State Battery Research

Mechanistic information regarding solid-solid interfaces in solid-state batteries remains elusive as its observation requires a non-destructive operando technique. Such a technique does not currently exist. Solid-state nuclear magnetic resonance (NMR) is uniquely suited to address this challenge as it is sensitive to chemistry, structure, and dynamics and can measure buried interfaces. However solid-state NMR requires high speed spinning of the sample at the ‘magic angle’ (MAS) to obtain adequate resolution. The metallic current collectors in a battery are detrimental to spinning in magnetic fields as they generate eddy currents which prevent spinning and dampen the NMR signal. Furthermore, the spinning nature of the MAS NMR experiment requires a wireless means of charging for operando capabilities. These challenges were addressed in this research and operando MAS NMR enabled by optical wireless charging was demonstrated. By limiting the size of the metallic components, we were able to spin a sample holder with electrical leads and a solid-state battery up to a few kilohertz, fast enough for high-resolution NMR. We achieved wireless charging by attaching a photovoltaic cell to the head of the NMR rotor and used a laser to transmit power to the photovoltaic cell. Demonstration of the optical wireless charging was performed by polarizing a liquid electrolyte during an operando MAS NMR measurement. This novel capability is a transformative technique for investigating the mechanistic electrochemical processes in solid-state samples.

25 ENERGY STORAGE↗

DOE OSTI2022

Study Non-Conventional Deep Eutectic Electrolytes for Lithium Ion Batteries [Poster]

In the field of energy storage, electrolytes are the materials or liquids used to transport ions or redox active chemicals to facilitate an electrochemical process. While conventional electrolytes are generally inexpensive and work well with lithium-ion batteries, they have many shortfalls however, such as corrosion of the cell, flammability, toxicity, price, and incompatibility with other metals. Our work highlights the formation of a novel deep eutectic electrolyte (DEE) based on methyl carbamate and lithium salts. This DEE shows good cycling performance with the potential for low temperature operation. This study provides insights into a relatively unexplored field of non-conventional electrolyte systems.

25 ENERGY STORAGE↗

DOE OSTI2023

Enrichment of H2 to CO2 ratio using formic acid as a hydrogen carrier - CRADA 581 (Abstract)

The collaboration between PNNL and OCOchem will investigate approaches to enhance the hydrogen (H2) content from a stream of H2 and carbon dioxide (CO2) gases produced in the catalytic decomposition of aqueous formic acid (FA85). OCOchem uses an electrochemical process to generate FA85 from captured CO2 using electricity from renewable resources. The FA85 is a liquid organic hydrogen carrier (LOHC) that provides the opportunity to transport and store hydrogen, in liquid form, at volumetric densities significantly greater than compressed H2 gas, i.e., 50 grams H2/liter FA. PNNL has developed and tested catalytic reactors to release H2 from LOHCs like FA and aqueous formate salts (FS). The H2 released from the LOHC can be oxidized in a proton-exchange membrane fuel cell (PEM-FC) to generate electricity with water as the only by-product. The purpose of the proposed project is to increase the purity of the hydrogen released from the LOHC to enhance the operation efficiency of the PEM FC. The PEM FC in combination with the LOHC provides an approach to demonstrate a portable generator that utilizes hydrogen as the energy carrier instead of conventional diesel generator. The ‘hydrogen generator’ can be used to supply emergency backup power and significantly reduce CO2 emissions relative to a diesel generator.

30 DIRECT ENERGY CONVERSION↗

DOE OSTI2024

Design and Materials of Reference Electrodes for Radioactive Waste Tank Service – A Literature Review

The Hanford site stores approximately 55 million gallons of radioactive and chemically hazardous wastes from the production of weapons materials. The wastes are stored in 177 underground, carbon steel storage tanks, 149 of these are single shell tanks (SSTs) and 28 of these are double shell tanks (DSTs). The DSTs provide critical retrieval and interim storage before the waste is vitrified in the Waste Treatment and Isolation Plant (WTP). The DSTs have been in service for 38 to 56 years and current plans indicate that WTP operations will be completed in 2075. Thus, the tanks will need to remain in service far beyond the initial 40-year life expectancy. For life extension of the tanks, effective corrosion control practices must remain in force. This effort includes direct measurements of the extent of corrosion (e.g., ultrasonic measurements and corrosion coupons) and electrochemical processes (e.g., linear polarization measurements).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2024

Electrochemical Production of Highly Valuable Carbon Nanotubes from Flue-Gas Sourced CO 2

The overarching goal of the project was to demonstrate a technology at pilot-scale that enables a net reduction in CO 2 and the production of carbon nanotubes (CNTs) with material properties comparable to commercially available CNTs at a selling price of ~80-90% less than what is available in the current market. The objectives were: (1) demonstrate the ability to utilize synthetic and real flue gas provided by a utility to produce CNTs through the SkyNano’s novel electrochemical process; (2) produce CNTs at the pilot-scale (0.2 kg/hr) using industrial flue gas that exhibit properties consistent with those available on the market today in industrial quantities, including median diameters of <30 nm, purity of at least 95% CNTs in final product, and high crystallinity (I D /I G < 1, measured via Raman spectroscopy); and (3) demonstrate the process to be sustainable and economically viable through the completion of a techno-economic analysis (TEA) and a life-cycle analysis (LCA).

20 FOSSIL-FUELED POWER PLANTS↗

DOE OSTI2025

CRADA Final Report: CRADA Number NFE-22-09311 with Agriwater Tech

Livestock wastewater management is a critical concern in the United States, with an annual production of approximately 1.37 billion tons of waste, surpassing human waste by three to twenty times. The mismanagement of manure wastewater poses significant threats to freshwater sources, ecosystems, and public health. Through this project, we proposed an innovative solution using electrocoagulation (EC) treatment. The EC technique is an electrochemical process involving the intentional corrosion of aluminum and iron electrodes to introduce trivalent ions into the solution, facilitating the co-precipitation and coagulation of contaminants and making the removal of water from sludge easier. The project's primary objective is to use EC to convert liquid animal manure into clean water for farm irrigation, drinking, and maintenance. This solution is vital for various farms including those facing drought, pursuing zero-discharge, and seeking Environmental Protection Agency (EPA) permits for livestock farm manure discharge into rivers. Preliminary research shows EC's potential to significantly reduce turbidity and phosphate levels in livestock wastewater, forming the basis for scalable onsite treatment. The goal of this proposed project is to develop an innovative farm-wastewater-treatment process to achieve clean water, fertilizer, and reduced greenhouse gases through electrification of current processes such as coagulation, dewatering, inactivation of viruses and bacteria, and filtration for recycling surface water from farm lagoons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

CRADA Final Report: CRADA Number NFE-22-09311 with Agriwater Tech

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

All-organic self-separating three-dimensionally nanoarchitected electrochemical energy storage devices

This work realizes a three-dimensionally (3D) nanoarchitected, all organic, "self-separating" lithium-ion electrochemical energy storage (EES) device that is cycled as a solid-state full cell. The device is enabled by a monolithic carbon anode with a co-continuous pore network, derived from the structure direction of resols by an ultra-large molar mass block copolymer (BCP), poly(styrene-block-2-dimethylaminoethyl methacrylate) (SA). Electropolymerization of a single-phase conductive and redox-active material, poly((2,3-dihydrothieno[3,4-b][1,4]dioxin-2-yl)methyl 9,10-dioxo-9,10-dihydroanthracene-2-carboxylate) (PAQEDOT), into the pore space provides the cathode of the cell. The device is electronically contacted to the relevant electrode network enabled by the co-continuous nature of each electrode. Electrochemical processing via cycling against external lithium in an electrolyte generates a solid electrolyte interphase (SEI) as a separator and lithiates the cell electrodes, after which the EES device is cycled in the solid state. While the full cell does not demonstrate high cyclability, the best full cell demonstrates a discharge capacity of 267 milliamp hours per gram (mAh/g). This work marks, to the best of knowledge of the authors, the first example of an all-organic materials derived 3D nanoarchitected EES device, as well as the first design of "self-separating" cell fabrication. Furthermore, generalization of the design to another co-continuous carbon form factor is demonstrated.

FOS: Physical sciences↗

DOE OSTI2020

Examination of Solvent- Room Temperature Ionic Liquid Interactions using 2D NMR and Computational Chemistry

Rare earth metals (REMs) are the key functioning material found in microelectronics, advanced batteries, and high-efficiency electrical motors. Current methods for producing REMs require high temperatures (i.e. energy intensive) and produce an abundance of hazardous fluoride waste. Room temperature ionic liquids (RTILs) are an ideal alternative electrolyte because they allow for a low-temperature, energy-efficient electrochemical process. RTIL properties such as viscosity and conductivity determine how effective they can be in this process. Since viscosity is directly related to both intra and intermolecular forces, this study sets out to investigate two RTILs-Trihexyltetradecylphosphonium dicyanamide (Cyphos 105) and Trihexyltetradecylphosphonium bistrifimide (Cyphos 109) and their interactions. Results from 2-dimensional nuclear magnetic resonance (2D NMR) spectroscopy show that there is an interaction between the tetradecyl tail and the phosphorus atom of the Cyphos RTIL. In order to establish whether this is an intra or an inter-molecular interaction, DFT-based computational calculations were performed to determine the optimized geometry. Calculations were done both in the gas phase and with propylene carbonate as an augmenting solvent. Preliminary results show that there is minimal intramolecular interaction between the tetradecyl tail and the phosphorus atom of the RTILs, and that the interaction seen in the 2D NMR experiment is likely of an intermolecular nature instead.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

STRUCTURAL STABILITY OF MAGNETIC TUNNEL JUNCTION BASED MOLECULAR SPINTRONICS DEVICES (MTJMSD)

Harnessing the exotic properties of molecular level nanostructures to produce novel sensors, metamaterials, and futuristic computer devices can be technologically transformative. In addition, connecting the molecular nanostructures to ferromagnetic electrodes bring the unprecedented opportunity of making spin property based molecular devices. We have demonstrated that magnetic tunnel junction based molecular spintronics device (MTJMSD) approach to address numerous technological hurdles that have been inhibiting this field for decades. MTJMSD approach is based on producing a capacitor like a testbed where two metal electrodes are separated by an ultrathin insulator and subsequently bridging the molecule nanostructure across the insulator to transform a capacitor into a molecular device. Our prior work showed that MTJMSDs produced extremely intriguing phenomenon such as room temperature current suppression by six orders, spin photovoltaic effect, and evolution of new forms of magnetic metamaterials arising due to the interaction of the magnetic a molecule with two ferromagnetic thin films. However, making robust and reproducible electrical connections with exotic molecules with ferromagnetic electrodes is full of challenges and requires attention to MTJMSD structural stability. This paper focuses on MTJMSD stability by describing the overall fabrication protocol and the associated potential threat to reliability. MTJMSD is based on microfabrication methods such as (a) photolithography for patterning the ferromagnetic electrodes, (b) sputtering of metallic thin films and insulator, and (c) at the end electrochemical process for bridging the molecules between two ferromagnetic films separated by ~ 2nm insulating gap.

36 MATERIALS SCIENCE↗

DOE OSTI2021

University Research to Support the MPACT 2020 Milestone

University research is a strong focus of the Office of Nuclear Energy within the Department of Energy. This research complements existing work in the various program areas and provides support and training for students entering the field. Four university projects have provided support to the Material Protection Accounting and Controls Technologies (MPACT) 2020 milestone focused on safeguards for electrochemical processing facilities. The University of Tennessee Knoxville has examined data fusion of NDA measurements such as Hybrid K-Edge Densitometry and Cyclic Voltammetry. Oregon State University and Virginia Polytechnic Institute have examined the integration of accountancy data with process monitoring data for safeguards. The Ohio State University and the University of Utah have developed a Ni-Pt SiC Schottky diode capable of high temperature alpha spectroscopy for actinide detection of molten salts. Finally, the University of Colorado has developed a key enabling technology for the use of Microcalorimetry.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2022

Production of chemical products using electrochemical flow systems and slug flow and associated methods

Systems and methods for electrochemically producing chemical products are provided. In certain cases, the systems and methods described herein are capable of producing chemical products such as hydrogen peroxide in solutions with relatively low concentrations of electrolyte or other dissolved species at high efficiencies and/or low energetic cost. In some cases, redox mediators are used to temporally decouple direct electrochemical processes from the production of the chemical product.

Voskian, Sahag↗

DOE OSTI2023

Carbon Corrosion in CO2 Electrolysis Systems

Driven by concerns over climate change, interest in CO2 conversion technologies has dramatically increased in recent years. By viewing CO2 as a readily available feedstock, many pathways for the production of carbon-neutral fuels and chemicals become available. In converting CO2, low carbon emitting energy sources must be used to ensure a low carbon footprint of the fuel and chemical products. The low-temperature electrochemical conversion of CO2 is a promising technology and allows for direct integration with renewable electricity sources. The development of low-temperature CO2 electrolysis technologies is informed by both PEM fuel cells and water electrolyzers, both of which are at a higher stage of development. However, CO2 electrolysis operates at a much higher cell voltage (-3V) than other low-temperature electrochemical processes, which can have implications for materials compatibility in the electrolyzer device. Carbon corrosion is of particular concern for the anode of CO2 electrolyzers, as a large driving force for corrosion exists due to the high required cell potentials. In this presentation, recent observations will be shared on carbon corrosion of the anode gas diffusion electrode (GDE) in low-temperature alkaline exchange membrane CO2 electrolysis. Results from ex-situ tests designed to isolate the carbon corrosion process for anode GDEs will be shared. These results will provide guidance on materials selection for CO2 utilization MEAs, which need to have a lifetime of several years to ensure industrial viability.

BIOMASS FUELS↗

DOE OSTI2023

Production of chemical products using electrochemical flow systems and mediators and associated methods

Systems and methods for electrochemically producing chemical products are provided. In certain cases, the systems and methods described herein are capable of producing chemical products such as hydrogen peroxide in solutions with relatively low concentrations of electrolyte or other dissolved species at high efficiencies and/or low energetic cost. In some cases, redox mediators are used to spatially decouple direct electrochemical processes from the production of the chemical product.

Murray, Alexander↗

DOE OSTI2024

Proliferation Detection via Acoustic Monitoring of Pyroprocessing Equipment and Related Systems

In support of nuclear safeguards and nonproliferation, this effort is leveraging acoustic and seismic sensors to advance detection of pyroprocessing activities. Pyroprocessing, or electrochemical processing, is a method of separating irradiated nuclear fuel into its actinide and fission product components, enabling the reuse of fuel materials and reducing the radiotoxicity of the remaining waste. Verification and accountability in the process poses several challenges because of the high radiation environment and the presence of material holdup through the facility. Irregular or unaccounted-for equipment operation can signify diversion or misuse of critical materials. Acoustic and seismic sensors offer the capability to identify periods of equipment operation and help verify adherence to accountancy records.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2025

Development of a Robust Reference Electrode in Aggressive Chemical and Radiation Environments in the Hanford Waste Tanks

The Hanford site stores more than 200 million liters of radioactive and chemically hazardous wastes from the production of weapons materials. The wastes are stored in 177 underground carbon-steel storage tanks, separated between 149 single shell tanks (SSTs) and 28 double shell tanks (DSTs). The DSTs provide critical retrieval and interim storage before the waste is vitrified in the Waste Treatment and Isolation Plant (WTP). The tanks will need to remain in-service far beyond the initial 40-year design life, and effective corrosion control practices must remain in force to extend the tanks’ lifespans. This effort includes direct measurements of corrosion rate (e.g., ultrasonic measurements and corrosion coupons) and electrochemical processes (e.g., linear polarization measurements and open circuit potential measurements). The Hanford site began monitoring the corrosion potential in select DSTs in 2008. Of the 45 reference electrodes that have been installed, 29 have failed and 6 others provided unreliable results. DOE-EM is supporting a 3-year program to develop a chemical and radiation resistant reference electrode for application in the Hanford tanks. The first year of the program focused on understanding the failure mechanism for the reference electrodes and identification of candidate construction materials that would mitigate degradation of the electrodes in the waste environment. During the second year of the program, the objectives were to: 1) test candidate materials under simulated waste conditions, 2) design components that will extend the service life of the electrode, 3) fabricate materials for prototype reference electrodes, and 4) assemble prototype reference electrodes for accelerated testing. The reference electrode is constructed of four principal parts: 1) junction, 2) casing, 3) inner chamber backfill materials, and 4) the sensing wire. Principally, improvements of the junction, casing, and inner chamber backfill materials are being pursued. The junction material at the interface between the waste and the inner chamber of the reference electrode was identified as a critical component in the failure of the reference electrodes. Nine candidate replacement junction materials were tested under simulated waste conditions to evaluate permeation rate. These materials included a variety of polymeric and ceramic materials, some of which were 3-D printed. Thus far, porous polyvinylidene fluoride materials have performed satisfactorily and are being considered for prototype development. The commercial electrode casing materials in general have performed well. Additionally, 3-D printing of chemically and mechanically stable materials is being investigated as a means for further improvement in fabrication consistency. SRNL has also investigated altering the reference electrode design to extend the service life. The new design of the interior of the reference electrode casing creates a longer, more tortuous path between the junction material and the electrode sensing wire. A finite element model was used to optimize the design without adversely impacting the circuit resistance of the electrode during the measurements, thus preserving the measurement accuracy while enhancing the service life. The inner chamber back fill materials are also critical to the performance of the reference electrode. Materials that are resistant to intruding tank waste and provide a conductive path to the sensing wire were investigated. Gel and powder materials that are interspersed with a conductive chloride bearing material were tested for their influence on diffusion and electrode resistance. All the investigated materials and components will be assembled, with collaboration from commercial vendors, to fabricate the initial prototypes. Accelerated testing of the prototypes will be initiated in Year 2 of the program and will be completed in Year 3. A recommendation on the materials of construction and the design of the new robust reference electrode will be presented to the Hanford tank farm facility.

Sykes, Kiana [Savannah River National Laboratory (↗