SEARCH · Engineering Papers

Results for “elastoplasticity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Symbolic derivation of material property matrices in finite element analysis

The principles and operation of MMAX, a symbolic-computation program which automates the process of generating property matrices for structural materials, are briefly described and illustrated with sample analyses of a rubberlike material and an elastoplastic material. MMAX is written in LISP under the symbolic finite-element generator FINGER and the general symbolic manipulator MACSYMA; it first derives the formulas required by mathematical manipulation, and then translates the formulas into FORTRAN code, adapted to the particular type of machine to be used for the numerical calculations. This approach is shown to combine efficiently the advantages of symbolic and numerical computation for engineering applications.

Tan, H. Q.↗

NASA NTRS1989

Three-dimensional aspects of plasticity-induced fatigue crack closure

A three-dimensional elastoplastic finite element analysis of fatigue crack growth and closure in a center-crack tension specimen was performed in order to investigate the crack opening stress as a function of specimen thickness under constant amplitude loading conditions. Elastic-perfectly plastic conditions were assumed and cycle loading was kept at R = 0.1. Firstly, by imposing proper boundary conditions on the three-dimensional model, a plane strain analysis was carried out. The ratio of stabilized opening stress over the maximum applied stress under plane strain conditions was found to be 0.28. Secondly, the model thickness was varied under fully three-dimensional conditions, and crack-opening stresses were determined for each specimen thickness. The crack-opening stress is found to vary through the thickness for the center crack tension specimen. On the specimen surface and in the midplane the crack-opening stress levels tend to two-dimensional solutions for plane stress and plane strain conditions, respectively.

Chermahini, R. G.↗

NASA NTRS1990

Surface-crack growth: Models, experiments, and structures; Proceedings of the Symposium, Sparks, NV, Apr. 25, 1988

The present volume on surface-crack growth modeling, experimental methods, and structures, discusses elastoplastic behavior, the fracture analysis of three-dimensional bodies with surface cracks, optical measurements of free-surface effects on natural surfaces and through cracks, an optical and finite-element investigation of a plastically deformed surface flaw under tension, fracture behavior prediction for rapidly loaded surface-cracked specimens, and surface cracks in thick laminated fiber composite plates. Also discussed are a novel study procedure for crack initiation and growth in thermal fatigue testing, the growth of surface cracks under fatigue and monotonically increasing load, the subcritical growth of a surface flaw, surface crack propagation in notched and unnotched rods, and theoretical and experimental analyses of surface cracks in weldments.

Reuter, Walter G.↗

NASA NTRS1989

Advanced applications of BEM to inelastic analysis of solids

Newly evolved boundary element solution algorithms are utilized for solving a range of elastoplastic and thermoplastic problems. The first algorithm is the typical iterative procedure in which the unknown boundary solution and the initial stress (or strain) rates are found together in an incremental iterative fashion. The second one is a variable stiffness type approach in which the incremental boundary solution is obtained in a direct (noniterative) manner. The third procedure differs from the two prior algorithms in that volume integration is not needed to incorporate the nonlinear effects in the analysis. Instead, initial stress rates are introduced in the boundary element system by way of particular integrals. The methodology is used in a general purpose, multiregion system that employs quadratic isoparametric shape functions to model the geometry and field variables of the body and can admit up to 15 substructured areas of different material properties.

Banerjee, P. K.↗

NASA NTRS1989

Advanced development of BEM for elastic and inelastic dynamic analysis of solids

Direct Boundary Element formulations and their numerical implementation for periodic and transient elastic as well as inelastic transient dynamic analyses of two-dimensional, axisymmetric and three-dimensional solids are presented. The inelastic formulation is based on an initial stress approach and is the first of its kind in the field of Boundary Element Methods. This formulation employs the Navier-Cauchy equation of motion, Graffi's dynamic reciprocal theorem, Stokes' fundamental solution, and the divergence theorem, together with kinematical and constitutive equations to obtain the pertinent integral equations of the problem in the time domain within the context of the small displacement theory of elastoplasticity. The dynamic (periodic, transient as well as nonlinear transient) formulations have been applied to a range of problems. The numerical formulations presented here are included in the BEST3D and GPBEST systems.

Banerjee, P. K.↗

NASA NTRS1989

Analytical and computational models of shells; Proceedings of the Symposium, ASME Winter Annual Meeting, San Francisco, CA, Dec. 10-15, 1989

Topics presented include asymptotic analysis and computation for shells, the edge effects in the Reissner-Mindlin plate theory, nonlinear problems of geometrically exact shell theories, and developments in variational methods for high performance plate and shell elements. Also presented are an assumed strain solid element model for geometrically nonlinear shell analysis, shell finite elements with six degrees of freedom per node, hierarchic plate and shell models based on p-extension, and a simple shell element formulation for large-scale elastoplastic analysis. Also discussed are the assessment of computational models for multilayered composite cylinders, shell models for impact analysis, analysis of shell structures subjected to contact-impacts, and the application of shell theory to cardiac mechanics.

Noor, Ahmed K.↗

NASA NTRS1990

Simulation of crack growth and crack closure under large cyclic plasticity

The propagation of a crack during cyclic loading with large plasticity was simulated using a finite element method. The numerical procedure included the determination of crack closing and opening by examining the contact condition of the crack surfaces in the plasticity iteration. The method was applied to the growth of cracks in Alloy 718 single edge notch specimens at 538 C subject to strain cycling under both nominally elastic and elastoplastic conditions. The results show, among other things, that the crack closure and opening stresses become more compressive as the loading becomes more plastic, and that, under a given control condition, the closure and opening stresses become less compressive as the crack propagates.

Kim, K. S.↗

NASA NTRS1990

Method and models for R-curve instability calculations

This paper presents a simple method for performing elastic R-curve instability calculations. For a single material-structure combination, the calculations can be done on some pocket calculators. On microcomputers and larger, it permits the development of a comprehensive program having libraries of driving force equations for different configurations and R-curve model equations for different materials. The paper also presents several model equations for fitting to experimental R-curve data, both linear elastic and elastoplastic. The models are fit to data from the literature to demonstrate their viability.

Orange, Thomas W.↗

NASA NTRS1990

Elastic/plastic analyses of advanced composites investigating the use of the compliant layer concept in reducing residual stresses resulting from processing

High residual stresses within intermetallic and metal matrix composite systems can develop upon cooling from the processing temperature to room temperature due to the coefficient of thermal expansion (CTE) mismatch between the fiber and matrix. As a result, within certain composite systems, radial, circumferential, and/or longitudinal cracks have been observed to form at the fiber-matrix interface. The compliant layer concept (insertion of a compensating interface material between the fiber and matrix) was proposed to reduce or eliminate the residual stress buildup during cooling and thus minimize cracking. The viability of the proposed compliant layer concept is investigated both elastically and elastoplastically. A detailed parametric study was conducted using a unit cell model consisting of three concentric cylinders to determine the required character (i.e., thickness and material properties) of the compliant layer as well as its applicability. The unknown compliant layer mechanical properties were expressed as ratios of the corresponding temperature dependent Ti-24Al-11Nb (a/o) matrix properties. The fiber properties taken were those corresponding to SCS-6 (SiC). Results indicate that the compliant layer can be used to reduce, if not eliminate, radial and circumferential residual stresses within the fiber and matrix and therefore also reduce or eliminate the radial cracking. However, with this decrease in in-plane stresses, one obtains an increase in longitudinal stress, thus potentially initiating longitudinal cracking. Guidelines are given for the selection of a specific compliant material, given a perfectly bonded system.

Arnold, Steven M.↗

NASA NTRS1990

Tensile deformation of 2618 and Al-Fe-Si-V aluminum alloys at elevated temperatures

The present study experimentally characterizes the effects of elevated temperature on the uniaxial tensile behavior of ingot metallurgy 2618 Al alloy and the rapidly solidified FVS 0812 P/M alloy by means of two constitutive formulations: the Ramberg/Osgood equation and the Bodner-Partom (1975) incremental formulation for uniaxial tensile loading. The elastoplastic strain-hardening behavior of the ingot metallurgy alloy is equally well represented by either formulation. Both alloys deform similarly under decreasing load after only 1-5 percent uniform tensile strain, a response which is not described by either constitutive relation.

Leng, Y.↗

NASA NTRS1991

Parallel computation in a three-dimensional elastic-plastic finite-element analysis

CRAY 2 and CRAY Y-MP evaluation runs are undertaken for a three-dimensional, elastoplastic FEM code implementation of the 'autotasking' parallel-processing technique, which is used in all code components except the matrix-equation solver. For a typical example problem in the case of a four-processor CRAY 2, a speedup factor of 2.1 was found achievable in a dedicated environment, and 1.7 in a multiuser environment; for a three-processor CRAY Y-MP, speedup in a multiuser environment was about 2.4. Only minimal effort was required to implement autotasking in this implementation code.

Shivakumar, K. N.↗

NASA NTRS1991

Limit pressure of a circumferentially reinforced SiC/Ti ring

Limit loads under plane stress and plane strain are found for a circumferentially reinforced elastoplastic ring subjected to interior pressure. These are used as bounds on an estimate of the failure pressure of a SiC/Ti test rig that is being fabricated and tested. The ring is to serve as a benchmark against which deformation and failure analysis methods can be assessed. An anisotropic perfect plasticity idealization of the SiC/Ti ring material is made and used in the limit load calculations. An estimate of the failure pressure of the NASA/PW benchmark test ring is given.

Robinson, D. N.↗

NASA NTRS1992

Effects of fiber and interfacial layer architectures on the thermoplastic response of metal matrix composites

Examined here is the effect of fiber and interfacial layer morphologies on thermal fields in metal matrix composites (MMCs). A micromechanics model based on an arbitrarily layered concentric cylinder configuration is used to calculate thermal stress fields in MMCs subjected to spatially uniform temperature changes. The fiber is modelled as a layered material with isotropic or orthotropic elastic layers, whereas the surrounding matrix, including interfacial layers, is treated as a strain-hardening, elastoplastic, von Mises solid with temperature-dependent parameters. The solution to the boundary-value problem of an arbitrarily layered concentric cylinder under the prescribed thermal loading is obtained using the local/global stiffness matrix formulation originally developed for stress analysis of multilayered elastic media. Examples are provided that illustrate how the morphology of the SCS6 silicon carbide fiber and the use of multiple compliant layers at the fiber/matrix interface affect the evolution of residual stresses in SiC/Ti composites during fabrication cool-down.

Pindera, Marek-Jerzy↗

NASA NTRS1991

Residual thermal strains and stresses in nickel aluminide matrix composites

Thermally induced residual strains and stresses developed during postfabrication cooling in Saphikon/NiAl and tungsten/NiAl high-temperature composites are investigated through three-dimensional elastoplastic finite-element analyses. Average axial and transverse strains in the matrix are found to be tensile and compressive, respectively, and similar for both Saphikon and W-fiber-reinforced NiAl composites. It is suggested that the residual matrix stresses and strains are controlled more by the low-matrix yield stress than by the fiber/matrix expansion mismatch. Residual thermal strains in the matrix of these composites are measured by using a neutron-diffraction technique; the measured axial and transverse strains in the matrix are found to be in agreement with the computed values.

Saigal, A.↗

NASA NTRS1990

Recent developments in the micromechanics of advanced composites

A summary of recent developments and results in the area of inelastic response of advanced composites obtained with the micromechanics model proposed by Aboudi is presented. The recent developments include investigation of linear viscoelastic response of polymer matrix composites and yielding and elastoplastic response of metal matrix composites. The predictive capability and accuracy of the model is demonstrated through comparison of the predicted results with experimental data and results of finite-element analyses.

Pindera, M.-J.↗

NASA NTRS1992

Limit pressure of a circumferentially reinforced SiC/Ti ring

Robinson, D. N.↗

NASA NTRS1991

Micromechanical studies of composites by BEM

Over the last five years BEM has been developed into a very effective tool for micromechanical studies of composites. The analyses developed range from static elastic analysis, steady state heat transfer, steady state and transient thermoelastic analysis, periodic and transient dynamic analysis. Currently some of these analyses are being extended to nonlinear micromechanical analyses involving viscoplasticity, elastoplasticity, combined plasticity fracture and creep. The paper describes some of the results for elastic analysis, heat transfer and thermoelastic analyses.

Banerjee, P. K.↗

NASA NTRS1993

Analysis of the anisotropic viscoplastic-damage response of composite laminates - Continuum basis and computational algorithms

The mathematical structure underlying the rate equations of a recently-developed constitutive model for the coupled viscoplastic-damage response of anisotropic composites is critically examined. In this regard, a number of tensor projection operators have been identified, and their properties were exploited to enable the development of a general computational framework for their numerical implementation using the Euler fully-implicit integration method. In particular, this facilitated (i) the derivation of explicit expressions of the (consistent) material tangent stiffnesses that are valid for both three-dimensional as well as subspace (e.g. plane stress) formulations, (ii) the implications of the symmetry or unsymmetry properties of these tangent operators from a thermodynamic standpoint, and (iii) the development of an effective time-step control strategy to ensure accuracy and convergence of the solution. In addition, the special limiting case of inviscid elastoplasticity is treated. The results of several numerical simulations are given to demonstrate the effectiveness of the schemes developed.

Saleeb, A. F.↗