Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “distribution functions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

PRETZELOSITY DISTRIBUTION FUNCTION $h_{1T}^ \bot $

The 'pretzelosity' distribution is discussed. Theoretical properties, model results, and perspectives to access experimental information on this leading twist, transverse momentum dependent parton distribution function are reviewed. Its relation to helicity and transversity distributions is highlighted.

Avakian, H.↗

Dust heating by Alfvén waves using non-Maxwellian distribution function

Quasilinear theory is employed in order to evaluate the resonant heating rate by Alfvén waves, of multiple species dust particles in a hot, collisionless, and magnetized plasma, with the underlying assumption that the dust velocity distribution function can be modeled by a generalized (r, q) distribution function. The kinetic linear dispersion relation for the electromagnetic dust cyclotron Alfvén waves is derived, and the dependence of the heating rate on the magnetic field, mass, and density of the dust species is subsequently investigated. The heating rate and its dependence on the spectral indices r and q of the distribution function are also investigated. It is found that the heating is sensitive to negative value of spectral index r.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

New Insights into the Crystal and Electronic Structures of Li 1+x V 1-x O 2 from Solid State NMR, Pair Distribution Function Analyses, and First Principles Calculations

Pair distribution function (PDF) analyses of synchrotron data obtained for the anode materials Li 1+x V 1-x O 2 (0 ≤ x ≤ 0.1) have been performed to characterize the short to medium range structural ordering. The data show clear evidence for the magnetically-induced distortion of the V sublattice to form trimers, the distortion persisting at even the highest excess Li content considered of x = 0.1. At least three distinct local environments were observed for the stoichiometric material LiVO 2 in 6 Li nuclear magnetic resonance (NMR) spectroscopy, the environments becoming progressively more disordered as the Li content increases. A two-dimensional Li-Li correlation NMR experiment (POST-C7) was used to identify the resonances corresponding to Li within the same layers. NMR spectra were acquired as a function of the state of charge, a distinct environment for Li in Li 2 VO 2 being observed. The results suggest that disorder within the Li layers (in addition to the presence of Li within the V layers as proposed by Armstrong et al. Nat. Mater.2011, 10, 223-229) may aid the insertion of Li into the Li 1+x V 1-x O 2 phase. The previously little-studied Li 2 VO 2 phase was also investigated by hybrid density functional theory (DFT) calculations, providing insights into magnetic interactions, spin-lattice coupling, and Li hyperfine parameters.

36 MATERIALS SCIENCE↗

A numerical method for determining highly precise electron energy distribution functions from Langmuir probe characteristics

Electron energy distribution functions (EEDFs) were determined from probe characteristics using a numerical ac superimposed method with a distortion correction of high derivative terms by varying amplitude of a sinusoidal perturbation voltage superimposed onto the dc sweep voltage, depending on the related electron energy. Low amplitude perturbation applied around the plasma potential represented the low energy peak of the EEDF exactly, and high amplitude perturbation applied around the floating potential was effective to suppress noise or distortion of the probe characteristic, which is fatal to the tail electron distribution. When a small random noise was imposed over the stabilized prove characteristic, the numerical differentiation method was not suitable to determine the EEDF, while the numerical ac superimposed method was able to obtain a highly precise EEDF.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Flavor dependence of the pion and kaon form factors and parton distribution functions

The separate quark flavor contributions to the pion and kaon valence quark distribution functions are studied, along with the corresponding electromagnetic form factors in the space-like region. The calculations are made using the solution of the Bethe-Salpeter equation for the model of Nambu and Jona-Lasinio with proper-time regularization. Both the pion and kaon form factors and the valence quark distribution functions reproduce many features of the available empirical data. The larger mass of the strange quark naturally explains the empirical fact that the ratio u(K) + (x)/u(pi) + (x) drops below unity at large x, with a value of approximately M$2\atop{u}$/Ms$2\atop{s}$ as x → 1. With regard to the elastic form factors we report a large flavor dependence, with the u-quark contribution to the kaon form factor being an order of magnitude smaller than that of the s-quark at large Q 2 , which may be a sensitive measure of confinement effects in QCD. Surprisingly though, the total K + and π + form factors differ by only 10%. Lastly, in general we find that flavor breaking effects are typically around 20%.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Distribution functions in plasmas generated by a volume source of fission fragments

The role played by fission fragments and electron distribution functions in nuclear pumped lasers is considered and procedures for their calculations are outlined. The calculations are illustrated for a He-3/Xe mixture where fission is provided by the He-3(n,p)H-3 reaction. Because the dominant ion in the system depends on the Xe fraction, the distribution functions cannot be determined without the simultaneous consideration of a detailed kinetic model. As is the case for wall sources of fission fragments, the resulting plasmas are essentially thermal but the electron distribution functions are non-Maxwellian.

Deese, J. E.↗

BLACK HOLE MASS AND EDDINGTON RATIO DISTRIBUTION FUNCTIONS OF X-RAY-SELECTED BROAD-LINE AGNs AT z {approx} 1.4 IN THE SUBARU XMM-NEWTON DEEP FIELD

In order to investigate the growth of supermassive black holes (SMBHs), we construct the black hole mass function (BHMF) and Eddington ratio distribution function (ERDF) of X-ray-selected broad-line active galactic nuclei (AGNs) at z {approx} 1.4 in the Subaru XMM-Newton Deep Survey (SXDS) field. A significant part of the accretion growth of SMBHs is thought to take place in this redshift range. Black hole masses of X-ray-selected broad-line AGNs are estimated using the width of the broad Mg II line and 3000 A monochromatic luminosity. We supplement the Mg II FWHM values with the H{alpha} FWHM obtained from our NIR spectroscopic survey. Using the black hole masses of broad-line AGNs at redshifts between 1.18 and 1.68, the binned broad-line AGN BHMFs and ERDFs are calculated using the V{sub max} method. To properly account for selection effects that impact the binned estimates, we derive the corrected broad-line AGN BHMFs and ERDFs by applying the maximum likelihood method, assuming that the ERDF is constant regardless of the black hole mass. We do not correct for the non-negligible uncertainties in virial BH mass estimates. If we compare the corrected broad-line AGN BHMF with that in the local universe, then the corrected BHMF at z = 1.4 has a higher number density above 10{sup 8} M{sub Sun} but a lower number density below that mass range. The evolution may be indicative of a downsizing trend of accretion activity among the SMBH population. The evolution of broad-line AGN ERDFs from z = 1.4 to 0 indicates that the fraction of broad-line AGNs with accretion rates close to the Eddington limit is higher at higher redshifts.

79 ASTRONOMY AND ASTROPHYSICS↗

Kinetic Theory for Distribution Functions of Wave-Particle Interactions in Plasmas

The evolution of a charged particle distribution function under the influence of coherent electromagnetic waves in a plasma is determined from kinetic theory. For coherent waves, the dynamical phase space of particles is an inhomogeneous mix of chaotic and regular orbits. The persistence of long time correlations between the particle motion and the phase of the waves invalidates any simplifying Markovian or statistical assumptions--the basis for usual quasilinear theories. The generalized formalism in this Letter leads to a hierarchy of evolution equations for the reduced distribution function. The evolution operators, in contrast to the quasilinear theories, are time dependent and nonsingular and include the rich phase space dynamics of particles interacting with coherent waves.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Light meson parton distribution functions from basis light-front quantization and QCD evolution

Here, we investigate the parton distribution functions (PDFs) of the pion and kaon from the eigenstates of a light-front effective Hamiltonian in the constituent quark-antiquark representation suitable for low-momentum scale applications. By taking these scales as the only free parameters, the valence quark distribution functions of the pion, after QCD evolving, are consistent with the E615 experiment at Fermilab. In addition, the ratio of the up quark distribution in the kaon to that in the pion also agrees with the NA3 experimental result at CERN.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Pair distribution function analysis of La(Fe{sub 1−x}Ru{sub x})AsO compounds

The local structures of La(Fe{sub 1−x}Ru{sub x})AsO (0.00≤x≤0.80) compounds were investigated by means of pair distribution function analysis at room temperature; as a result, no phase separation or clustering takes place. Local distortions are no longer correlated beyond ∼15 Å for both pure and substituted samples, indicating that the presence of Ru atoms does not determine a notable variation in the length scale of the local distortion. Different types of short range correlation between Fe and Ru atoms do not produce significant changes in the pair distribution function. - Graphical abstract: Fe–As and Ru–As bond length distributions as obtained by pair distribution function analysis of La(Fe{sub 0.70}Ru{sub 0.30})AsO; As atoms (purple spheres) undergo a random shifting around their crystallographic positions (red spheres: Fe/Ru atoms). - Highlights: • No phase separation or clustering takes place in La(Fe{sub 1−x}Ru{sub x})AsO solid solutions. • Local distortions are no longer correlated beyond ∼15 Å. • Ru displays a tendency towards local enrichment in the transition metal sublattice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computer controlled facility for measurement of the bidirectional scattering distribution function

A computer controlled facility for measurement of the bidirectional scattering distribution function is described, with application to the evaluation of spacecraft surface contamination in optical and thermal control systems. An automatic detector/sampleholder allows a 360-deg detector scan around the sample for a complete bidirectional reflectance and transmittance distribution function characterization. The system demonstrates reduced data acquisition and reduction cycle time, and improved accuracy.

Carosso, Paolo A.↗

Distribution Function Instead of Steady-State Assumption in Time-Series Simulation

The quasi-steady-state assumption in time-series simulation is inadequate to model phenomena of interest to energy system integration such as inverter clipping, sell-back of excess electricity to a utility and utility hosting capacity, and battery throughput. Researchers are working on stochastic modeling, higher-resolution time series data, and machine learning approaches to address this need. This poster describes a distribution function that allows a maximum value, minimum value, and shape to the curve that can vary within each time-step based only on data inputs at the resolution of that time step (eg. Hourly). The distribution function is not used to synthesize high-resolution data, rather scalar integrals are used to calculate the quantities of interest within each time step. The form of the distribution function shows significant reduction in error when compared to 1 minute data and commercial software employing the distribution function (HOMER Pro version 14.3 and higher) shows a much improved estimate of inverter clipping in an example.

battery↗

Improving Project Management with Simulation and Completion Distribution Functions

Despite the critical importance of project completion timeliness, management practices in place today remain inadequate for addressing the persistent problem of project completion tardiness. A major culprit in late projects is uncertainty, which most, if not all, projects are inherently subject to. This uncertainty resides in the estimates for activity durations, the occurrence of unplanned and unforeseen events, and the availability of critical resources. In response to this problem, this research developed a comprehensive simulation based methodology for conducting quantitative project completion time risk analysis. It is called the Project Assessment by Simulation Technique (PAST). This new tool enables project stakeholders to visualize uncertainty or risk, i.e. the likelihood of their project completing late and the magnitude of the lateness, by providing them with a completion time distribution function of their projects. Discrete event simulation is used within PAST to determine the completion distribution function for the project of interest. The simulation is populated with both deterministic and stochastic elements. The deterministic inputs include planned project activities, precedence requirements, and resource requirements. The stochastic inputs include activity duration growth distributions, probabilities for events that can impact the project, and other dynamic constraints that may be placed upon project activities and milestones. These stochastic inputs are based upon past data from similar projects. The time for an entity to complete the simulation network, subject to both the deterministic and stochastic factors, represents the time to complete the project. Repeating the simulation hundreds or thousands of times allows one to create the project completion distribution function. The Project Assessment by Simulation Technique was demonstrated to be effective for the on-going NASA project to assemble the International Space Station. Approximately $500 million per month is being spent on this project, which is scheduled to complete by 2010. NASA project stakeholders participated in determining and managing completion distribution functions produced from PAST. The first result was that project stakeholders improved project completion risk awareness. Secondly, using PAST, mitigation options were analyzed to improve project completion performance and reduce total project cost.

Cates, Grant R.↗

A simple method for obtaining a three-dimensional proton distribution function from Voyager plasma data

The main sensor of the Vogager plasma experiment consists of a cluster of three, modulated-grid Faraday cups whose normals are arranged symmetrically about the symmetry axis of the cluster at an angle of 20 degrees to that axis. In interplanetary space, each cup explores the positive ion distribution by accepting particles from contiguous slices in velocity space. The slices are narrow in the direction of the normal to the modulating grid but are broad in planes parallel to that grid. The resulting three sets of measurements can be combined to yield the three-dimensional distribution function in the following way: the distribution function is assumed to be gyrotropic. For each value of speed in a frame of reference moving with the bulk velocity of the solar wind, the variation of the distribution function with angle from the field direction is represented by a series of Legendre polynomials. Effects such as double-streaming and heat flow can be well represented by using only the first three terms of the series which are fully specified by the measurements. Examples of the use of this method in the analysis of Voyager data are shown.

Olbert, S.↗

Electron distribution functions in solar flares from combined X-ray and extreme-ultraviolet observations

Simultaneous solar flare observations with SDO and RHESSI provide spatially resolved information about hot plasma and energetic particles in flares. RHESSI allows the properties of both hot (≳8 MK) thermal plasma and non-thermal electron distributions to be inferred, while SDO/AIA is more sensitive to lower temperatures. We present and implement a new method to reconstruct electron distribution functions from SDO/AIA data. The combined analysis of RHESSI and AIA data allows the electron distribution function to be inferred over the broad energy range from 0.1 keV up to a few tens of keV. The analysis of two well-observed flares suggests that the distributions in general agree to within a factor of three when the RHESSI values are extrapolated into the intermediate range 1-3 keV, with AIA systematically predicting lower electron fluxes. Possible instrumental and numerical effects, as well as potential physical origins for this discrepancy, are discussed. The inferred electron distribution functions in general show one or two nearly Maxwellian components at energies below ∼15 keV and a non-thermal tail above.

79 ASTRONOMY AND ASTROPHYSICS↗

Local structures of Sr{sub 2}FeMnO{sub 5+y} (y=0, 0.5) and Sr{sub 2}Fe{sub 1.5}Cr{sub 0.5}O{sub 5} from reverse Monte Carlo modeling of pair distribution function data and implications for magnetic order

The local structures of the oxygen deficient perovskites Sr{sub 2}FeMnO{sub 5}, Sr{sub 2}FeMnO{sub 5.5}, and Sr{sub 2}Fe{sub 1.5}Cr{sub 0.5}O{sub 5} have been analyzed using neutron pair distribution function data. The results show that locally all three structures are more complex than implied by their average cubic structures and that the distributions of oxygen vacancies are not completely random on a local level. For both Sr{sub 2}FeMnO{sub 5+y} compounds it is found that there is no short range ordering of the Fe and Mn cations. For Sr{sub 2}Fe{sub 1.5}Cr{sub 0.5}O{sub 5} there is evidence to suggest that the Fe/Cr distribution is not completely random and is locally ordered such that there are fewer Fe--Fe nearest neighbor pairs than in a random distribution. Reverse Monte Carlo modeling of the pair distribution function data has provided the Fe--O, Mn--O, and Cr--O bond length distributions and information on the coordination numbers of the Fe, Mn, and Cr cations. In Sr{sub 2}FeMnO{sub 5} it is found that the Fe{sup 3+} cations are most often in 4-fold coordination but there is also a large amount of Fe{sup 3+} in 5-fold coordination and a small amount in 6-fold coordination. The Mn{sup 3+} is split between 5-fold and 6-fold coordination. The Mn--O bond length distributions indicate that the Mn{sup 3+}O{sub 6} octahedra and Mn{sup 3+}O{sub 5} square pyramids are locally Jahn-Teller distorted. In Sr{sub 2}FeMnO{sub 5.5} the Fe{sup 3+} is almost entirely 5 coordinate while the Mn{sup 4+} is almost entirely 6 coordinate. The Cr{sup 3+} in Sr{sub 2}Fe{sub 1.5}Cr{sub 0.5}O{sub 5} is almost entirely 6-fold coordinated, giving the Fe{sup 3+} an average coordination number of 4.67. In Sr{sub 2}FeMnO{sub 5} and Sr{sub 2}Fe{sub 1.5}Cr{sub 0.5}O{sub 5} the Fe{sup 3+} and Sr{sup 2+} cations undergo local displacements which are driven by the oxygen vacancies, while the Mn{sup 3+} and Cr{sup 3+} cations remain near their positions in the average structures. In Sr{sub 2}FeMnO{sub 5.5} these cations are not significantly displaced. The local coordination geometries are used to explain previously observed but yet poorly understood magnetic properties of these materials. - Graphical abstract: The actual bond angle distributions in the cubic perovskite Sr{sub 2}FeMnO{sub 5} obtained from reverse Monte Carlo modeling of the local structure using neutron pair distribution function data. Highlights: Black-Right-Pointing-Pointer No long range ordering of oxygen vacancies, but short range order is present. Black-Right-Pointing-Pointer No short range Fe/Mn order but short range Fe/Cr order is present. Black-Right-Pointing-Pointer Fe tends to have lower coordination numbers while Mn and Cr have higher ones. Black-Right-Pointing-Pointer Local bond distances and bond angles have been determined. Black-Right-Pointing-Pointer Local structures can help explain long range magnetic ordering behavior.

36 MATERIALS SCIENCE↗

Effect of anisotropy of electron velocity distribution function on dynamic characteristics of sheath in Hall thrusters

In Hall thrusters, the electron velocity distribution function is not only depleted at high energies, but also strongly anisotropic. With these electrons interacting with the channel wall, the sheath will be changed in its dynamic characteristics. In the present letter, a two dimensional particle-in-cell code is used to simulate these effects in a collisionless plasma slab. The simulated results indicate that the sheath changes from steady regime to temporal oscillation regime when the electron velocity distribution function alters from isotropy to anisotropy. Moreover, the temporal oscillation sheath formed by the anisotropic electrons has a much greater oscillating amplitude and a much smaller average potential drop than that formed by the isotropic electrons has. The anisotropic electrons are also found to lower the critical value of electron temperature needed for the appearance of the spatial oscillation sheath.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Higher moment equations and the distribution function of the solar-wind plasma.

Study of the higher-moment equations for a collisionless fully ionized plasma. For a collisionless, heat-conducting plasma, the distribution function f is cylindrically symmetric about the direction of the magnetic field. It is shown that under a certain assumption the fourth moments of f can be expressed as simple functions of lower moments. Thus no higher-moment terms appear in the third-moment equations. The two third-moment equations, which are obtained in a simple form, join other lower-moment equations to form a closed set of moment equations. The new equations can be used to study the thermal anisotropy and the heat flux of the solar-wind proton. A special case of the cylindrically symmetric distribution function f is found to resemble the proton distribution function reconstructed from solar-wind data, and this resemblance justifies the assumption needed for decoupling the moment equations.

Whang, Y. C.↗