Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “diffraction contrast”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Microstructural evolution and precipitation in γ-LiAlO 2 during ion irradiation

Polycrystalline γ-LiAlO 2 pellets were sequentially irradiated with 120 keV He + and 80 keV D 2 + ions to the fluences of 1 × 10 17 and 2 × 10 17 (He + + D + )/cm 2 at 573 K. Additional irradiation was performed to a fluence of 2 × 10 17 (He + + D + )/cm 2 at 773 K. The irradiated pellets were characterized using scanning transmission electron microscopy, time-of-flight secondary ion mass spectrometry, and grazing incidence x-ray diffraction. Lattice damage, amorphization, and fractures are observed with no evidence for the formation of secondary-phase precipitates in the pellets irradiated up to an ion fluence of 2 × 10 17 (He + + D + )/cm 2 at 573 K. In contrast, faceted precipitates with sizes larger than 100 nm formed in a pellet irradiated to 2 × 10 17 (He + + D + )/cm 2 at 773 K. Analyses of the diffraction and composition data suggest that the precipitates have a spinel-type structure, likely a non-stoichiometric LiAl 5 O 8 with Li depletion. This could be an intermediate phase with Li atoms at the octahedral and possibly tetrahedral sites as well. It is speculated that as the dose increases, Li loss will continue and the precipitates will approach a composition of alumina primarily in phases of α-Al 2 O 3 and amorphized Al 2 O 3 .

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2020

Femtosecond laser produced periodic plasma in a colloidal crystal probed by XFEL radiation

With the rapid development of short-pulse intense laser sources, studies of matter under extreme irradiation conditions enter further unexplored regimes. In addition, an application of X-ray Free-Electron Lasers (XFELs) delivering intense femtosecond X-ray pulses, allows to investigate sample evolution in IR pump - X-ray probe experiments with an unprecedented time resolution. Here we present a detailed study of the periodic plasma created from the colloidal crystal. Both experimental data and theory modeling show that the periodicity in the sample survives to a large extent the extreme excitation and shock wave propagation inside the colloidal crystal. This feature enables probing the excited crystal, using the powerful Bragg peak analysis, in contrast to the conventional studies of dense plasma created from bulk samples for which probing with Bragg diffraction technique is not possible. X-ray diffraction measurements of excited colloidal crystals may then lead towards a better understanding of matter phase transitions under extreme irradiation conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1996

Pyridoxine deficiency affects biomechanical properties of chick tibial bone

The mechanical integrity of bone is dependent on the bone matrix, which is believed to account for the plastic deformation of the tissue, and the mineral, which is believed to account for the elastic deformation. The validity of this model is shown in this study based on analysis of the bones of vitamin B6-deficient and vitamin B6-replete chick bones. In this model, when B6-deficient and control animals are compared, vitamin B6 deficiency has no effect on the mineral content or composition of cortical bone as measured by ash weight (63 +/- 6 vs. 58 +/- 3); mineral to matrix ratio of the FTIR spectra (4.2 +/- 0.6 vs. 4.5 +/- 0.2), line-broadening analyses of the X-ray diffraction 002 peak (beta 002 = 0.50 +/- 0.1 vs. 0.49 +/- 0.01), or other features of the infrared spectra. In contrast, collagen was significantly more extractable from vitamin B6-deficient chick bones (20 +/- 2% of total hydroxyproline extracted vs. 10 +/- 3% p < or = 0.001). The B6-deficient bones also contained an increased amount of the reducible cross-links DHLNL, dehydro-dihydroxylysinonorleucine, (1.03 +/- 0.07 vs. 0.84 +/- 0.13 p < or = 0.001); and a nonsignificant increase in HLNL, dehydro-hydroxylysinonorleucine, (0.51 +/- 0.03 vs. 0.43 +/- 0.03, p < or = 0.10). There were no significant changes in bone length, bone diameter, or area moment of inertia. In four-point bending, no significant changes in elastic modulus, stiffness, offset yield deflection, or fracture deflection were detected. However, fracture load in the B6-deficient animals was decreased from 203 +/- 35 MPa to 151 +/- 23 MPa, p < or = 0.01, and offset yield load was decreased from 165 +/- 9 MPa to 125 +/- 14 MPa, p < or = 0.05. Since earlier histomorphometric studies had demonstrated that the B6-deficient bones were osteopenic, these data suggest that although proper cortical bone mineralization occurred, the alterations of the collagen resulted in changes to bone mechanical performance.

Non-NASA Center↗
DOE OSTI2022

Measurement of shock roughness due to phase plate speckle imprinting relevant for x-ray diffraction experiments on 3rd and 4th generation light sources

Laser-shock compression experiments at 3rd and 4th generation light sources generally employ phase plates, which are inserted into the beamline to achieve a repeatable intensity distribution at the focal plane. Here, the laser intensity profile is characterized by a high-contrast, high-frequency laser speckle. Without sufficient smoothing, these laser non-uniformities can translate to a significant pressure distribution within the sample layer and can affect data interpretation in x-ray diffraction experiments. Here, we use a combination of one- and two-dimensional velocity interferometry to directly measure the extent to which spatial frequencies within the laser focal spot intensity pattern are smoothed out during propagation within the laser plasma and a polyimide ablator. We find that the use of thicker polyimide layers results in spatially smoother shock fronts, with the greatest degree of smoothing associated with the highest spatial frequencies. Focal spots with the smallest initial speckle separation produce the most rapid smoothing. Laser systems that employ smoothing by spectral dispersion techniques to rapidly modulate the focal plane intensity distribution are shown to be the most effective ones in producing a spatially smooth shock front. We show that a simple transport model combined with the known polyimide Hugoniot adequately describes the extent of shock smoothness as a function of polyimide thickness. Finally, our results provide a description of spatial structure smoothing across a shock front, which can be used to design targets on x-ray free electron laser facilities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Iterative X-ray spectroscopic ptychography

Spectroscopic ptychography is a powerful technique to determine the chemical composition of a sample with high spatial resolution. In spectro-ptychography, a sample is rastered through a focused X-ray beam with varying photon energy so that a series of phaseless diffraction data are recorded. Each chemical component in the material under investigation has a characteristic absorption and phase contrast as a function of photon energy. Using a dictionary formed by the set of contrast functions of each energy for each chemical component, it is possible to obtain the chemical composition of the material from high-resolution multi-spectral images. This paper presents SPA (spectroscopic ptychography with alternating direction method of multipliers), a novel algorithm to iteratively solve the spectroscopic blind ptychography problem. First, a nonlinear spectro-ptychography model based on Poisson maximum likelihood is designed, and then the proposed method is constructed on the basis of fast iterative splitting operators. SPA can be used to retrieve spectral contrast when considering either a known or an incomplete (partially known) dictionary of reference spectra. By coupling the redundancy across different spectral measurements, the proposed algorithm can achieve higher reconstruction quality when compared with standard state-of-the-art two-step methods. It is demonstrated how SPA can recover accurate chemical maps from Poisson-noised measurements, and its enhanced robustness when reconstructing reduced-redundancy ptychography data using large scanning step sizes is shown.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

High-energy micrometre-scale pixel direct conversion X-ray detector

The objective of this work was to fabricate and characterize a new X-ray imaging detector with micrometre-scale pixel dimensions (7.8 µm) and high detection efficiency for hard X-ray energies above 20 keV. A key technology component consists of a monolithic hybrid detector built by direct deposition of an amorphous selenium film on a custom designed CMOS readout integrated circuit. Characterization was carried out at the synchrotron beamline 1-BM-B at the Advanced Photon Source of Argonne National Laboratory. The direct conversion detector demonstrated micrometre-scale spatial resolution with a 63 keV modulation transfer function of 10% at Nyquist frequency. In addition, spatial resolving power down to 8 µm was determined by imaging a transmission bar target at 21 keV. X-ray signal linearity, responsivity and lag were also characterized in the same energy range. Finally, phase contrast edge enhancement was observed in a phase object placed in the beam path. This amorphous selenium/CMOS detector technology can address gaps in commercially available X-ray detectors which limit their usefulness for existing synchrotron applications at energies greater than 50 keV; for example, phase contrast tomography and high-resolution imaging of nanoscale lattice distortions in bulk crystalline materials using Bragg coherent diffraction imaging. Here, the technology will also facilitate the creation of novel synchrotron imaging applications for X-ray energies at or above 20 keV.

36 MATERIALS SCIENCE↗
NASA NTRS1982

Residual stress in high modulus carbon fibers

The modulus and residual strain in carbon fibers are measured by successively electrochemically milling away the fiber surface. Electrochemical etching is found to remove the carbon fiber surface very uniformly, in contrast to air and wet oxidation. The precision of fiber diameter measurements is improved by using a laser diffraction technique instead of optical methods. More precise diameter measurements reveal that past correlations of diameter and fiber modulus are largely measurement artifact. The moduli of most carbon fibers decrease after the outer layers of the fibers are removed. Owing to experimental difficulties, the moduli and strengths of the fibers at their centers are not determined, and moduli are estimated on the basis of microstructure. The calculated residual stresses are found to be insensitive to these moduli estimates as well as the exact form of regression equation used to describe the moduli and residual strain distributions. Axial compressive residual stresses are found to be very high for some higher modulus carbon fibers. It is pointed out that the compressive stress makes the fibers insensitive to surface flaws when loaded in tension but it may initiate failure by buckling when loaded in compression.

Chen, K. J.↗
NASA NTRS1987

Structural characterization and gas reactions of small metal particles by high resolution in-situ TEM (Transmission Electron Microscopy) and TED (Transmission Electron Diffraction)

The detection and size analysis of small metal particles supported on amorphous substrates becomes increasingly difficult when the particle size approaches that of the phase contrast background structures of the support. An approach of digital image analysis, involving Fourier transformation of the original image, filtering, and image reconstruction was studied with respect to the likelihood of unambiguously detecting particles of less than 1 nm diameter on amorphous substrates from a single electron micrograph.

Heinemann, K.↗
DOE OSTI2025

Solving the “Coloring Problem” in InPd 3– x Ag x ( x = 0–0.7) by Phase Diagrams Modeling and Diffraction Experiments

Here, a series of InPd 3–x Ag x (x = 0–1) compositions were synthesized by conventional high-temperature synthesis, and as-synthesized samples were characterized by powder X-ray diffraction experiments. Up to x = 0.7, InPd 3–x Ag x adopts the ternary substitutional variant of the InPd 3 structure (TiAl 3 -type), when x > 0.7, elemental Ag starts to segregate along with the main phase. Accurate structural characterization in InPd 3–x Ag x faces a critical challenge due to the narrow X-ray scattering contrast among constituents In, Pd, and Ag and nearly identical neutron scattering lengths of Pd and Ag. To overcome this “coloring problem”, a combination of calculation of phase diagrams modeling (CALPHAD) and diffraction techniques (X-ray and neutron) was employed. In the compositional range 0 ≤ x ≤ 0.7, InPd 3–x Ag x presents a ternary variant of the TiAl 3 -type structure, where Ag atoms selectively substitute one (the 2b Wyckoff site) of the two Pd sites in InPd 3 . Notably, in contrast to the isologous InPd 3–x Cu x (x = 0–1) system, Ag substitution does not form an ordered VRh 2 Sn-type structure at the limiting composition. The distinct site preference in InPd 3–x Ag x is elucidated by charge population analysis, electronic structure calculations, and orbital-resolved chemical bonding investigations, and the extent of substitution is supported by formation free energy calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Structural investigation of the temperature-stable relaxor dielectric Ba 0.8 Ca 0.2 TiO 3 -Bi(Mg 0.5 Ti 0.5 )O 3

Aberration corrected scanning transmission electron microscopy (STEM) and electron diffraction have been used to disclose local structure and nano-chemistry in a Ca modified BaTiO 3 -Bi(Mg 0.5 Ti 0.5 )O 3 relax or dielectric ceramic which exhibits high and near-invariant relative permittivity over a wide temperature range. High resolution, synchrotron X-ray diffraction indicated a globally cubic structure ($Pm$$\overline{3}$$m$), but direct atomic-scale imaging by STEM revealed local tetragonal distortions. Nanopolar clusters were identified from B-site atomic displacement vectors measured relative to oxygen ion positions along < 100 > and < 110 > zone axes of integrated differential phase contrast (iDPC) STEM images, highlighting cluster sizes of 2–5 nm. Chemical analysis by STEM-energy dispersive X-ray spectroscopy and full pattern refinements of X-ray powder diffraction data each implied high levels of Bi vacancies within the matrix. The possibility that these A-site vacancies modulate the nanopolar structure and promote flattening of the permittivity-temperature response in this class of dielectric is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Solid solutions limited by grain-boundary solute clustering in ultrafine-grained alloys

Immiscible Ag-Cu alloys exhibit complex behavior due to varying Cu solid solubilities reported under equilibrium and metastable conditions. In ultrafine-grained alloys, these limits are further complicated by a high fraction of grain boundaries, where solute atoms tend to segregate and, in some cases, form clusters. Here, this study investigates the influence of Cu solute segregation and clustering on solid-solution limits in ultrafine-grained Ag-Cu alloys synthesized by magnetron sputtering with varying Cu content. X-ray diffraction peak shifts reveal a solid-solution concentration plateau for Cu contents from 4.9 to 11.7 at %, in contrast to the peak shifts predicted by density-functional theory for Ag-Cu alloys. Scanning transmission electron microscopy further reveals limited solid solubility and the formation of numerous Cu-rich clusters at grain boundaries. Atomistic simulations demonstrate that such limited solubility does not arise from grain boundary segregation alone, but only when strong solute-solute interactions promote the formation of grain-boundary Cu solute clusters.

Density-functional theory↗
DOE OSTI2020

Site-Specific Structure at Multiple Length Scales in Kagome Quantum Spin Liquid Candidates

Realizing a quantum spin liquid (QSL) ground state in a real material is a leading issue in condensed matter physics research. In this pursuit, it is crucial to fully characterize the structure and influence of defects, as these can significantly affect the fragile QSL physics. In this work, we perform a variety of cutting-edge synchrotron x-ray scattering and spectroscopy techniques, and we advance new methodologies for site-specific diffraction and L-edge Zn absorption spectroscopy. The experimental results along with our first-principles calculations address outstanding questions about the local and long-range structures of the two leading kagome QSL candidates, Zn-substituted barlowite Cu 3 Zn x Cu 1-x (OH) 6 FBr and herbertsmithite Cu 3 Zn(OH) 6 Cl 2 . On all length scales probed, there is no evidence that Zn substitutes onto the kagome layers, thereby preserving the QSL physics of the kagome lattice. Our calculations show that antisite disorder is not energetically favorable and is even less favorable in Zn-barlowite compared to herbertsmithite. Site-specific x-ray diffraction measurements of Zn-barlowite reveal that Cu 2+ and Zn 2+ selectively occupy distinct interlayer sites, in contrast to herbertsmithite. Using the first measured Zn L-edge inelastic x-ray absorption spectra combined with calculations, we discover a systematic correlation between the loss of inversion symmetry from pseudo-octahedral (herbertsmithite) to trigonal prismatic coordination (Zn-barlowite) with the emergence of a new peak. Overall, our measurements suggest that Zn-barlowite has structural advantages over herbertsmithite that make its magnetic properties closer to an ideal QSL candidate: its kagome layers are highly resistant to nonmagnetic defects while the interlayers can accommodate a higher amount of Zn substitution.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High Pressure Brillouin Spectroscopy and X-ray Diffraction of Cerium Dioxide

Simultaneous high-pressure Brillouin spectroscopy and powder X-ray diffraction of cerium dioxide powders are presented at room temperature to a pressure of 45 GPa. Micro- and nanocrystalline powders are studied and the density, acoustic velocities and elastic moduli determined. In contrast to recent reports of anomalous compressibility and strength in nanocrystalline cerium dioxide, the acoustic velocities are found to be insensitive to grain size and enhanced strength is not observed in nanocrystalline CeO 2 . Discrepancies in the bulk moduli derived from Brillouin and powder X-ray diffraction studies suggest that the properties of CeO 2 are sensitive to the hydrostaticity of its environment. Our Brillouin data give the shear modulus, G 0 = 63 (3) GPa, and adiabatic bulk modulus, K S0 = 142 (9) GPa, which is considerably lower than the isothermal bulk modulus, K T0 ~ 230 GPa, determined by high-pressure X-ray diffraction experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Vibrational spectroscopy of uranium tetrafluoride hydrates

Uranium tetrafluoride (UF 4 ) is an important intermediate in the production of UF6 and nuclear fuel. Historical characterization of UF 4 with Raman spectroscopy was plagued with ambiguity until the first accurate Raman spectrum was published by our group in 2016. Although generally considered to be relatively stable, UF 4 can hydrolyze to form numerous UF 4 hydrates that may play a role in future uranium waste forms. In contrast to anhydrous UF 4 , the hydrates, with their OH stretch and HOH bending modes, can be spectroscopically characterized by the type and degree of water bonding in the crystal lattice, which can yield additional information about their crystal structure. Herein, vibrational spectroscopy (Raman and infrared) was used to characterize three different UF 4 hydrates: UF 4 (H 2 O) 0.33 , U 3 F 12 (H 2 O), and UF 4 (H 2 O) 2.5 . Spectra show the different hydrates vary in the number of observed bands, full-width half-maximum of the bands, and band intensity. These differences are due to varying interactions between the OH stretch and HOH bending modes with UF 4 and the polymeric UF 4 structure in the crystal lattice. These vibrational data, in combination with spectral fitting and crystallographic structures measured with powder X-ray diffraction and single crystal X-ray diffraction, provide unique details on the location of water molecules in the crystal lattice of hydrated UF 4 , and provide an interesting contrast to the vibrational spectra of anhydrous UF 4 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Competing magnetic phases in Cr 3+𝛿 ⁢Te 4 are spatially segregated

Cr 1+𝑥⁢ Te 2 is a self-intercalated van der Waals system that is of current interest for its room-temperature room-temperature ferromagnetic (FM) phases and tunable topological properties. In bulk samples, the strain from the interstitial Cr ions leads to distinct structural phases for different ranges of 𝑥. Early neutron powder diffraction (NPD) measurements on the monoclinic phase Cr 3 ⁢Te 4 (𝑥=0.5) presented evidence for competing FM and antiferromagnetic (AFM) phases. Here we apply neutron diffraction to a single crystal of Cr 3+𝛿 ⁢Te 4 with 𝛿=−0.10 and discover that it consists of two distinct monoclinic phases, one with FM order below 𝑇 C ≈321 K and another that develops AFM order below 𝑇 N ≈86 K. In contrast, we find that a crystal with 𝛿=−0.26 exhibits only FM order below 𝑇 C ≈285 K. The single-crystal analysis is complemented by results obtained with NPD, x-ray powder diffraction, and transmission electron microscopy (TEM) measurements on the 𝛿=−0.10 composition. From observations of spontaneous magnetostriction of opposite sign at 𝑇 C and 𝑇 N , along with the TEM evidence for both monoclinic phases in a single thin ( ≈100 nm) grain, we conclude that the two phases must have a fine-grained ( ≲100 nm) intergrowth character, as might occur from high-temperature spinodal decomposition during the growth process. Calculations of the relaxed lattice structures for the FM and AFM phases with density functional theory provide a rationalization of the observed spontaneous magnetostrictions. Correlations between the magnitude and orientation of the magnetic moments with lattice parameter variation demonstrate that the magnetic orders are sensitive to strain, thus explaining why magnetic ordering temperatures and anisotropies can be different between bulk and thin-film samples, when the latter are subject to epitaxial strain. Our results point to the need to investigate the supposed coexistence FM and AFM phases reported elsewhere in the Cr 1+𝑥 ⁢Te 2 system, such as in the Cr 5 ⁢Te 8 phase (𝑥=0.25).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Intrinsic property of defective β-Ga 2 O 3 to self-heal under ionizing irradiation

Damage evolution and phase stability in defective β-Ga 2 O 3 and an irradiation-converted γ-Ga 2 O 3 layer have been studied under ionizing irradiation at 300 K. By exploring athermal nonequilibrium processes in β-Ga 2 O 3 , we succeed in identifying a self-healing mechanism that enables recovery pre-existing damage, characterized by a recovery cross-section of ~0.17 nm 2 . Remarkably, this study further demonstrates that the crystallinity of the irradiation-converted γ-Ga 2 O 3 layer improves under ionizing irradiation. More importantly, X-ray diffraction analysis reveals that the highly-strained 𝛾 -phase transforms into a highly-crystalline structure without film disintegration, contrasting to that reported for isochronal annealing at 1000 K. The inelastic thermal spike calculations provide insights into the important effects of energy transfer to electrons in reordering the local atomic arrangement of both defective β- Ga 2 O 3 and 𝛾-Ga 2 O 3 . This behavior suggests a pathway for low-temperature crystallization, offering a promising strategy for fabricating ultrahigh-speed non-volatile memory devices.

36 MATERIALS SCIENCE↗