Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dielectric function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Dynamic Response of an Electron Gas: Towards the Exact Exchange-Correlation Kernel

Precise calculations of dynamics in the homogeneous electron gas (jellium model) are of fundamental importance for design and characterization of new materials. In this work, we introduce a diagrammatic Monte Carlo technique based on algorithmic Matsubara integration that allows us to compute frequency and momentum resolved finite temperature response directly in the real frequency domain using series of connected Feynman diagrams. The data for charge response at moderate electron density are used to extract the frequency dependence of the exchange-correlation kernel at finite momenta and temperature. These results are as important for development of the time-dependent density functional theory for materials dynamics as ground state energies are for the density functional theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Communication—First-Principles Simulations of LiPF 6 Decomposition in Ethylene Carbonate-Based Electrolytes

We revisit a theoretical result by Okamoto (2013 Journal of The Electrochemical Society , 160 , A404) who calculated the energy barrier for the decomposition of lithium hexafluorophosphate (LiPF 6 ) into LiF + PF 5 when solvated in Ethylene carbonate (EC)-based electrolyte. Using different numerical techniques to discretize the Density Functional Theory (DFT) equations, and different continuum solvation models with the same dielectric constant, our results largely confirm the original calculation. However, simulations with a higher dielectric permittivity value, closer to that of EC, show a lower energy barrier. More importantly, First-Principles simulations with an explicit solvent show a substantially lower energy barrier.

25 ENERGY STORAGE↗

Pareto Optimization of Oligomer Polarizability and Dipole Moment Using a Genetic Algorithm

High-performance electronic components are highly sought after in order to produce increasingly smaller and cheaper electronic devices. Drawing inspiration from inorganic dielectric materials, in which both polarizability and polarization contribute, organic materials can also maximize both. For a large set of small molecules drawn from PubChem, a Pareto-like front appears between the polarizability and dipole moment, indicating the presence of an apparent trade-off between these two properties. We tested this balance in π-conjugated materials by searching for novel conjugated hexamers with simultaneously large polar- izabilities and dipole moments with potential use for dielectric materials. Using a genetic algorithm (GA) screening technique in conjunction with an approximate density functional tight-binding method for property calculations, we were able to efficiently search chemical space for optimal hexamers. Given the scope of chemical space, using the GA technique saves considerable time and resources by speeding up molecular searches compared to a systematic search. Here, we also explored the underlying structure–function relationships, including sequence and monomer properties, that characterize large polarizability and dipole moment regimes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoinduced charge transfer in Zn(II) and Au(III)-ligated symmetric and asymmetric bacteriochlorin dyads: A computational study

The excited-state properties and photoinduced charge-transfer (CT) kinetics in a series of symmetrical and asymmetrical Zn- and Au-ligated meso–meso-connected bacteriochlorin (BChl) complexes are studied computationally. BChl derivatives, which are excellent near-IR absorbing chromophores, are found to play a central role in bacterial photosynthetic reaction centers but are rarely used in artificial solar energy harvesting systems. The optical properties of chemically linked BChl complexes can be tuned by varying the linking group and involving different ligated metal ions. We investigate charge transfer in BChl dyads that are either directly linked or through a phenylene ring (1,4- phenylene) and which are ligating Zn or Au ions. The directly linked dyads with a nearly perpendicular arrangement of the BChl units bear markedly different properties than phenylene linked dyads. In addition, we find that the dielectric dependence of the intramolecular CT rate is very strong in neutral Zn-ligated dyads, whereas cationic Au-ligated dyads show negligible dielectric dependence of the CT rate. Rate constants of the photo induced CT process are calculated at the semiclassical Marcus level and are compared to fully quantum mechanical Fermi’s golden rule based values. The rates are calculated using a screened range separated hybrid functional that offers a consistent framework for addressing environment polarization. We study solvated systems in two solvents of a low and a high scalar dielectric constant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polymorphous nature of cubic halide perovskites

Many common crystal structures can be described by a single (or very few) repeated structural motif (“monomorphous structures”) such as octahedron in cubic halide perovskites. Interestingly, recent accumulated evidence suggests that electronic structure calculations based on such macroscopically averaged monomorphous cubic ($\textit{Pm} – 3m$) halide perovskites obtained from x-ray diffraction, show intriguing deviations from experiment. These include systematically too small band gaps, dielectric constants dominated by the electronic, negative mixing enthalpy of alloys, and significant deviations from the measured pair distribution function. We show here that a minimization of the systems $\textit{T}$ = 0 internal energy via density functional theory reveals a distribution of different low-symmetry local motifs, including tilting, rotations, and B-atom displacements (“polymorphous networks”). This is found only if one allows for larger-than-minimal cell size that does not geometrically exclude low symmetry motifs. As the (super) cell size increases, the energy is lowered relative to the monomorphous cell, and stabilizes after ~32 formula units (≥160 atoms) are included. Being a result of nonthermal energy minimization in the internal energy without entropy, this correlated set of displacements must represent the intrinsic geometry preferred by the underlying chemical bonding (lone pair bonding), and as such has a different origin than the normal, dynamic thermal disorder modeled by molecular dynamics. Indeed, the polymorphous network, not the monomorphous ansatz, is the kernel structure from which high temperature thermal agitation develops. The emerging physical picture is that the polymorphous network has an average structure with high symmetry, yet the local structural motifs have low symmetries. In this work we find that, compared with monomorphous counterparts, the polymorphous networks have significantly lower predicted total energies, larger band gaps, and ionic dominated dielectric constants, and agree much more closely with the observed pair distribution functions. An analogous polymorphous situation is found in the paraelectric phase of a few cubic oxide perovskites where local polarization takes the role of local displacements in halide perovskites, and in the paramagnetic phases of a few 3 d oxides where the local spin configuration takes that role.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Gauss’s law analysis of redox active adsorbates on semiconductor electrodes: The charging and faradaic currents are not independent

A detailed framework for modeling and interpreting the data in totality from a cyclic voltammetric measurement of adsorbed redox monolayers on semiconductor electrodes has been developed. A three-layer model consisting of the semiconductor space-charge layer, a surface layer, and an electrolyte layer is presented that articulates the interplay between electrostatic, thermodynamic, and kinetic factors in the electrochemistry of a redox adsorbate on a semiconductor. Expressions are derived that describe the charging and faradaic current densities individually, and an algorithm is demonstrated that allows for the calculation of the total current density in a cyclic voltammetry measurement as a function of changes in the physical properties of the system (e.g., surface recombination, dielectric property of the surface layer, and electrolyte concentration). The most profound point from this analysis is that the faradaic and charging current densities can be coupled. That is, the common assumption that these contributions to the total current are always independent is not accurate. Their interrelation can influence the interpretation of the charge-transfer kinetics under certain experimental conditions. More generally, this work not only fills a long-standing knowledge gap in electrochemistry but also aids practitioners advancing energy conversion/storage strategies based on redox adsorbates on semiconductor electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Capacitance of thin films containing polymerized ionic liquids

Electrode-polymer interfaces dictate many of the properties of thin films such as capacitance, the electric field experienced by polymers, and charge transport. However, structure and dynamics of charged polymers near electrodes remain poorly understood, especially in the high concentration limit representative of the melts. To develop an understanding of electric field–induced transformations of electrode-polymer interfaces, we have studied electrified interfaces of an imidazolium-based polymerized ionic liquid (PolyIL) using combinations of broadband dielectric spectroscopy, specular neutron reflectivity, and simulations based on the Rayleigh’s dissipation function formalism. Overall, we obtained the camel-shaped dependence of the capacitance on applied voltage, which originated from the responses of an adsorbed polymer layer to applied voltages. This work provides additional insights related to the effects of molecular weight in affecting structure and properties of electrode-polymer interfaces, which are essential for designing next-generation energy storage and harvesting devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrated Metal and Metal-Nitrate Complexes in Water: Full Lanthanide(III) Series plus Miscellaneous Metal Ions

This is a dataset of hydrated metal complexes and metal–nitrate hydrated complexes intended for public use, reproducibility, and downstream structural analysis. A key feature is coverage across the full lanthanide(III) series (La–Lu), enabling systematic comparisons of coordination motifs and bonding trends across the entire lanthanide sequence. In addition to the lanthanides, the dataset also includes other metal ions such as UO2(VI), Fe(II), and Fe(III). The dataset provides optimized geometries for hydrated and nitrate-containing hydrated complexes, together with representative ab initio molecular dynamics (AIMD) trajectories saved in standard XYZ formats. The accompanying NWChem input decks enable reproduction of the reported calculations and provide a starting point for extending the simulations to related coordination environments. Computationally, DFT calculations employ the B3LYP functional with DFT-D3BJ dispersion corrections and a COSMO continuum solvent model (dielectric constant 78.4) to represent solvation beyond the explicitly treated first hydration shell. AIMD simulations are performed with the NWChem qmd module at 298 K, integrating nuclear motion with the velocity-Verlet algorithm and controlling temperature using a Nosé–Hoover thermostat. Trajectories are approximately 4.8 ps in length and are used primarily to assess short-time stability of candidate coordination motifs, including (for lanthanides) differences between 8- versus 9-water coordination and comparisons between nitrate-bound and nitrate-free hydrated complexes.

Dinpajooh, Mohammadhasan [Pacific Northwest Nation↗

Influence of the Graft Length on Nanocomposite Structure and Interfacial Dynamics

Both the dispersion state of nanoparticles (NPs) within polymer nanocomposites (PNCs) and the dynamical state of the polymer altered by the presence of the NP/polymer interfaces have a strong impact on the macroscopic properties of PNCs. In particular, mechanical properties are strongly affected by percolation of hard phases, which may be NP networks, dynamically modified polymer regions, or combinations of both. In this article, the impact on dispersion and dynamics of surface modification of the NPs by short monomethoxysilanes with eight carbons in the alkyl part (C 8 ) is studied. As a function of grafting density and particle content, polymer dynamics is followed by broadband dielectric spectroscopy and analyzed by an interfacial layer model, whereas the particle dispersion is investigated by small-angle X-ray scattering and analyzed by reverse Monte Carlo simulations. NP dispersions are found to be destabilized only at the highest grafting. The interfacial layer formalism allows the clear identification of the volume fraction of interfacial polymer, with its characteristic time. The strongest dynamical slow-down in the polymer is found for unmodified NPs, while grafting weakens this effect progressively. The combination of all three techniques enables a unique measurement of the true thickness of the interfacial layer, which is ca. 5 nm. Finally, the comparison between longer (C 18 ) and shorter (C 8 ) grafts provides unprecedented insight into the efficacy and tunability of surface modification. It is shown that C 8 -grafting allows for a more progressive tuning, which goes beyond a pure mass effect.

36 MATERIALS SCIENCE↗

A Theoretical Analysis on the Dynamic Behavior and Electromechanical Response of PZT

Piezoelectric materials are used as a power source in stockpile components for safety and reliability assurances. The objective of this project is to gain insights into the fundamental pressure-induced behavior and electromechanical response of lead zirconate titanate (PZT). Specifically, to establish the basis for an accurate, physics-based material model for robust model-based design to rapidly optimize PZT-based materials and components for performance studies. Established ab-initio methods are used to interrogate and understand the dynamic behavior of PZT as a function of composition (50/50, 65/35, 80/20, 95/5) and dopants (La, Nb) to overcome the costly and time-consuming experimental methodologies. New cold curves for pure and doped single-crystal PZT are obtained as the reference equation-of-state (EOS). A negligible change in the pressure responses was observed for the systems and strains studied. Dielectric and piezoelectric responses of pure and doped single-crystal PZT were also calculated as a function of pressure. For undoped PZT, there is a clear and orderly pressure and composition dependence. For doped PZT, there is a significant increase in the responses, but the behavior is very disordered and inconclusive.

36 MATERIALS SCIENCE↗

Coupling and Decoupling between Stickers and Backbones in Associating Polymers with Terminally Functionalized Side Chains

Associating polymers have recently attracted tremendous attention as self-healing polymers due to the dynamic reversibility of sticker association–dissociation processes. These sticker dynamics inevitably slow significantly as segmental dynamics decelerate below the glass transition temperature that limits the operational temperatures of associating polymers. Using broadband dielectric spectroscopy on a new set of associating polymers composed side chains of various lengths and terminal carboxylic-acid sticker functionality, we discovered an unexpected decoupling near the glass transition (T g ) between the slower backbone and fast sticker motions. These two motions have distinct activation energies for the motion of the sulfur linkage adjacent to the backbone (~22 to 26 kJ/mol) and the carboxylic acid groups (~5 to 8 kJ/mol). A second decoupling appears in the polymer with the longest side chain length at T g – 20 K, reflecting the dynamics of various carboxylic acid binding configurations. Furthermore, our findings open the door to design associating polymers with the capability of sticker association/dissociation at low temperatures.

36 MATERIALS SCIENCE↗

Magnetocapacitance effect and magnetoelectric coupling in type-II multiferroic HoFeWO 6

We have investigated the multiferroicity and magnetoelectric (ME) coupling in HoFeWO 6 . With a noncentrosymmetric polar structure (space group Pna2 1 ) at room temperature, this compound shows an onset of electric polarization with an antiferromagnetic ordering at the Néel temperature (T N ) of 17.8 K. The magnetic properties of the polycrystalline samples were studied by DC and AC magnetization and heat capacity measurements. The metamagnetic behavior at low temperatures was found to be directly related to the dielectric properties of the compound. In particular, field-dependent measurements of capacitance show a magnetocapacitance (MC) effect with double-hysteresis loop behavior in direct correspondence with the magnetization. Our x-ray diffraction results show the Pna2 1 structure down to 8 K and suggest the absence of a structural phase transition across T N . Soft x-ray absorption spectroscopy and soft x-ray magnetic circular dichroism (XMCD) measurements at the Fe L 2,3 and Ho M 4,5 edges revealed the oxidation state of Fe and Ho cations to be 3+. Fe L 2,3 XMCD further shows that Fe 3+ cations are antiferromagnetically ordered in a noncollinear fashion with spins arranged 90° with respect to each other. Our findings show that HoFeWO 6 is a type-II multiferroic exhibiting a MC effect. Furthermore, the observed MC effect and the change in polarization by the magnetic field, as well as their direct correspondence with magnetization, further support the strong ME coupling in this compound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ionization state and dielectric constant in cold rarefied hydrocarbon plasmas of inertial confinement fusion

A combined approach to study cold rarefied matter is introduced that includes a semianalytical method based on the free-energy minimization and ab initio calculations based on the finite-temperature density-functional theory. The approach is used to calculate the ionization state of hydrocarbon (CH) under the shock-release conditions in inertial confinement fusion. Furthermore, the dielectric constant of CH is calculated using the Kubo-Greenwood formulation and contribution from atomic polarizabilities is found to be as important as the free-electron contribution. Using the ionization state and dielectric constant, the electron density profile in the rarefaction wave of the shock-release plasma is obtained.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Incorporation of Thioacetate Pendants on a Polyalkenamer Enables High Extensibility

This study focuses on functionalizing polycyclooctene (PCOE) with thioacetate groups using thiol–ene click chemistry. The ethylene thioacetate (EVSA) copolymers produced vary in thioacetate incorporation (4–25 mol %) via a controlled semibatch addition technique with AIBN dosing. Copolymers with 4–14 mol % thioacetate are semicrystalline, while those with 20–25 mol % are amorphous. Increased functionalization correlates with decreased crystallinity and increased stretchability, with the highest functionalization (25 mol %) showing a modulus of 0.045 MPa and 2000% elongation at break. Here, this behavior is due to the pseudoprecise functionalization of the thioacetate pendants and intrinsic cross-linking that occurs during melt processing. Broadband dielectric spectroscopy (BDS) indicates a low activation energy barrier (16 kJ/mol for the β process), suggesting potential self-healing applications.

36 MATERIALS SCIENCE↗

Uncovering microstructure and composition susceptibility of high permittivity ceramic granules to plasma-induced arc breakdown

Effective diversion of surge currents is vital to prevent unwanted damage to sensitive electronics. Among the most successful and efficient strategies relies on a dielectric stimulated arc breakdown mechanism with high permittivity ceramic granules in a spark-gap geometry. Although generally regarded as a self-healing process, substantial energy deposition may occur that, over time, diminishes the ability to withstand repeated electrical assaults. We investigate the susceptibility of lead–magnesium–niobate–lead titanate (PMN–PT) granule microstructure and composition changes following many exposures to high voltage impulses resulting in arc breakdown. Scanning electron microscopy and energy-dispersive spectroscopy mapping reveal a broad range of thermal and mechanical defects entailing thermal reduction of constituent PMN–PT metal ions and recasting due to rapid eruption of volatile species. Additionally, evidence of local melting and microcracking are apparent that can have deleterious impact on the proper function of the granules, namely, the ability to concentrate electric fields across air gaps to establish and sustain discharge pathways. We propose that the localized nature of damage and stochasticity associated with the dielectric stimulated breakdown mechanism may allow granules to maintain functionality provided no permanent conduction paths are established.

36 MATERIALS SCIENCE↗

High performance Calcium Copper Titanate/Polyimide dielectrics composites enabled through colloidal stabilization

Transition to electrified transportation demands advanced power electronic components with the capability to improve range, reliability, and cost of ownership to accelerate mass market adoption. Thus, improvement in the current designs, manufacturing processes, materials, and components capable of providing reliable and efficient operation at higher temperatures play important roles in meeting future needs. To address these challenges, this article focuses on novel dielectric materials designed to reduce the volume of the most important and bulky component of a power electronic system, a capacitor. A new composite dielectric material was developed by integrating the positive attributes of both polymer and ceramic capacitors to overcome the challenges of state-of-the-art dielectric materials. Further, the developed composite properties have been evaluated and showed promising results, achieving a dielectric constant of 250 at 100 Hz, 25°C, unseen in current literature. Additionally, these materials can function at high temperatures (>150°C) with good breakdown strength, providing promising working conditions for capacitors, especially in electric vehicle applications.

36 MATERIALS SCIENCE↗

Cooperative effects in thin dielectric layers: Long-range Dicke superradiance

The realization and control of collective quantum effects so far have predominantly focused on cold atomic ensembles. Quantum photonic platforms, with their engineered Green's functions and integration capability of advanced solid-state quantum emitters, provide opportunities to explore regimes of light-matter interaction beyond the scope of atomic systems. In this work, we demonstrate that embedding quantum emitters within a thin dielectric layer fundamentally alters their collective radiative behavior. The optical modes in the dielectric layer mediate long-range dipole-dipole interactions between emitters, enabling both total and directional superradiance between emitters separated by several wavelengths. Crucially, this mechanism supports Dicke superradiance even in parameter regimes where standard settings fail to support an interaction, unveiling a dimensionality-driven enhancement of cooperative effects. By bridging many-body quantum optics and photonic engineering, our work reveals a distinct interplay between surrounding dimensionality and collective quantum dynamics. Experimental realization of these predictions, readily achievable in solid-state quantum optics platforms, paves the way for scalable, directional quantum light sources and frontiers in many-body quantum optics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Molecular beam epitaxy of superconducting zirconium nitride on GaN substrates

Epitaxial integration of metals and semiconductors can enable enhanced performance and novel functionality. Achieving such pristine interfaces with superconducting materials is of increasing interest for quantum devices and detectors, but the experimental demonstration remains challenging, given the very limited studies on single crystalline systems. To expand the potential materials for these systems, this work explores the deposition of zirconium nitride superconducting thin films on GaN substrates at various temperatures using molecular beam epitaxy. A general trend of decreasing superconducting critical temperature is observed as the deposition temperature is reduced. The optical properties reveal a transition from metallic to dielectric behavior with colder deposition. The plasma frequency of the metallic films is also observed to be a function of growth temperature. These results pave the way for the integration of a highly tunable metal nitride with a well-established semiconductor system.

36 MATERIALS SCIENCE↗