Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dependence analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Quantifying molecular deformation in polymer melts by a generalized Zimm plot approach

The Zimm plot has been widely used to characterize the molecular dimensions of polymers from small-angle scattering experiments, where the reciprocal intensity is analyzed as a function of the square of the magnitude of the scattering wavevector Q. Here, this work explores the benefits of analyzing the reciprocal scattering intensity from deformed polymers, extending the original Zimm plot to anisotropic materials. In the small-angle limit, a tensorial extension of the Guinier law is found for the gyration tensor and the reciprocal single-chain structure factor. In the high-Q limit, application of the spherical harmonic expansion technique to the reciprocal structure factor permits direct model-independent analysis of spatially dependent molecular deformation of polymers. Additionally, the contributions from high-order spherical harmonics become insignificant in the reciprocal-intensity representation. The proposed generalized Zimm plot approach is demonstrated computationally with the affine deformation model and the Rouse model, and experimentally with small-angle neutron scattering measurements of deformed polystyrene melts.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Dynamic Structure Discovery Applied to the Ion Transport in the Ubiquitous Lithium-ion Battery Electrolyte LP30

The electrolytes of the today omnipresent lithium-ion batteries (LIBs) have for more than 25 years been based upon 1 M LiPF 6 in a 50:50 EC:DMC mixture—commonly known as LP30. The success of the basic design of the LP30 electrolyte, with many variations and additions made over the years, is unchallenged. Yet, some molecular level fundamentals of LP30 are surprisingly elusive: the structure of the first solvation shell of the Li + cation is still a topic of current debate; the details of the dynamics are not fully understood; the interpretation of structural and dynamic properties is highly dependent on the analysis methods used; the contributions by different species to the ion transport and the energetics involved are not established. We here apply dynamic structure discovery analysis as implemented in CHAMPION to molecular dynamics simulation trajectories to bring new light on the structure and dynamics within LP30 and especially the (Li + ) ion transport to rationalize further development of LIB electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2021

A Big Problem for Small Earthquakes: Benchmarking Routine Magnitudes and Conversion Relationships with Coda Envelope-Derived Mw in Southern Kansas and Northern Oklahoma

Earthquake magnitudes are widely relied upon measures of earthquake size. Although moment magnitude (M w ) has become the established standard for moderate and large earthquakes, difficulty in reliably measuring seismic moments for small (generally M w <4) earthquakes has meant that magnitudes for these events remain plagued by a patchwork of inconsistent measurement scales. Because of this, magnitudes of small earthquakes and statistics derived from them can be biased. Furthermore, because small earthquakes are much more numerous than large ones, many applications, such as seismic hazard modeling, depend critically on analysis of events characterized by magnitudes other than M w . Therefore, to assess this problem, we apply coda envelope analysis to reliably determine moment magnitudes for a case study of small earthquakes from northern Oklahoma and southern Kansas. Not surprisingly, we find significant differences among M L , m bLg , and M w for M ~2–4 earthquakes examined here. More troublingly, we find that relations designed to convert other magnitudes to M w , which are relied upon for important applications such as seismic hazard analysis, often increase rather than decrease this bias for our dataset. In our case study, we find that converted magnitudes can result in a systematic bias sometimes exceeding 0.5 magnitude units, a difference that typically corresponds to a factor of ~3 in seismicity rate. Moreover, we find a correspondingly large bias in Gutenberg–Richter b-values, controlled primarily by inaccurate magnitude scaling in the conversion relationships. Although this study focuses on a relatively small geographic area, we can expect that similar issues exist with varying severity in other regions. Therefore, magnitudes of small earthquakes and their associated statistics, including seismicity rates and b-values, should be treated with caution.

58 GEOSCIENCES↗
DOE OSTI2020

Foundations of an Electric Mobility Strategy for the City of Mexicali

The Foundations of an Electric Mobility Strategy for the city of Mexicali aligns with numerous energy, environmental, and transport plans and will help Mexicali meet multiple related goals. Mexicali’s energy mix, with 28% renewables, already enables plugin electric vehicles (PEVs) to reduce the mass of greenhouse gases (GHGs) per km driven 2/3 below that of their conventional counterparts. This GHG benefit will increase should Mexicali take steps to further increase their share of renewables in their electricity supply. Beyond increasing renewables, Mexicali could possibly deploy PEVs so that electric load is added in the right location (depending on further analysis of substations and feeders) and at the right time (between 21:00 and 11:00) in order to minimize grid upgrade costs. There are a handful of charge timing control mechanisms –at various stages of development– that Mexicali could implement. Transport electrification can facilitate mass transit by powering buses, trains, and small vehicles that get people from their homes or work to the transit stations and vice versa. Mexicali could utilize fleets as early PEV adopters in order to gain acceptance and add electric vehicle supply equipment (EVSE). Recommended prioritization of different types of fleets are suggested in this report: transit buses, school buses, airport ground support equipment (GSE), refuse trucks, taxis, shuttle buses, campus vehicles, delivery trucks, utility trucks, and finally semitrailers. There are a handful of policy options that Mexicali could use to incentivize fleets to purchase PEVs, including mandates, economic incentives, energy performance contracts, waivers to access restrictions, electricity discounts, and EVSE requirements in building codes. Mexicali’s taxi fleet was an early adopter of PEVs and had experienced some challenges—mostly related to the insufficient range of the taxis due to hot weather. In this report, we strategize ways to extend the range of the current electric taxis, including ways to make charging more convenient to the drivers, and more suggestions for appropriate vehicles to purchase in the future. This report also includes the groundwork of geotracking Mexicali’s taxi fleet so that more detailed recommendations can be made in the future. Once fleets have increased PEV acceptance and EVSE installations, the market will be ready to expand to private vehicle owners. In order to do this, more EVSE needs to be installed in the right locations. This mobility strategy lays out general local areas where EVSE could be well utilized, based on traffic patterns, land use, and demographic data. Mexicali could approach businesses within these areas that would likely make suitable hosts, based on how well they can profit from the additional business that EVSE would bring. Mexicali could then adopt a series of purchase incentives (including sales tax waivers or access to high-occupancy vehicles [HOV] lanes) that would encourage private vehicle owners to purchase PEVs. Purchase incentives run the risk of creating equity issues, which can be countered by promoting electrification in mass transit, creating more HOV lanes that have PEV exemptions, and installing EVSEs in underserved communities. Private PEV ownership will require a set of experts that Mexicali can help train, including PEV repair technicians, EVSE installation electricians, and first responders.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2020

Exploratory Efforts to Constrain Geologic Material Properties from Remote Sensing Data: Joint Study (FY2020 Final Report)

Identification and characterization of underground events from surface or remote data requires a thorough understanding of the rock material properties. However, material properties usually come from borehole data, which is expensive and not always available. A potential alternative is to use topographic characteristics to approximate the strength, but this has never been done before quantitatively. Here we present the results from the first steps towards this goal. We have found that there are strong correlations between compressive and tensile strengths and slopes, but these correlations vary depending on data analysis details. Rugosity may be better correlated to strength than slope values. More comprehensive analyses are needed to fully understand the best method of predicting strength from topography for this area. We also found that misalignment of multiple GIS datasets can have a large influence on the ability to make interpretations. Lastly, these results will require further study in a variety of climatic conditions before being applicable to other sites.

58 GEOSCIENCES↗
DOE OSTI2020

Fast Computational Algorithms for Partial Differential Equations and Uncertainty Quantifications

This project concerned the construction, testing and analysis of computational algorithms for solving parameterized and stochastic partial differential equations. The study and understanding of equations of this type is of fundamental importance in numerous engineering and scientific applications. Examples include simulation of plasma dynamics in models of electric propulsion and nuclear fusion, simulation of multiphase flows, such as the flow of water, gas and oil in reservoirs, and structural analysis of the dependence of structures on materials. Parametrization is used in such settings when properties of the models such as viscosity of fluids or electric resistivity of materials are not precisely understood and instead are treated as random variables. The resulting solutions are themselves random, and having such solutions will enable engineers to use probabilistic methods to assess the likelihood of events, for example, whether a pollutant in a liquid will exceed a limit, and to use such analyses to develop ways to ensure positive outcomes. Construction of accurate (high resolution) computational solutions is expensive, requiring significant computer time and computational resources, and there is need to reduce computational cost to make simulation useful and effective. The aim of the project was to construct algorithms to efficiently compute surrogate solutions to parameterized problems to allow for efficient and accurate simulation. The technical approach used focused on two related strategies, based on rank-reduction methods and reduced-order models. These methods construct surrogate solutions of parameter-dependent models by projection or interpolation into low-dimensional approximation spaces. Cost savings are achieved if the low-dimensional spaces can be identified and constructed efficiently and if the resulting low-dimensional algebraic systems can be solved cheaply. Accomplishments include: Theoretical and empirical demonstration of the effectiveness of fast multigrid solution strategies for computing low-rank representations of parameter-dependent solutions to discrete partial differential equations, including the first proof establishing so-called textbook convergence properties for low-rank methods. Development of efficient solution algorithms for solving nonlinear parameter-dependent partial differential equations used in models of fluid dynamics. Developent of efficient algorithms for low-rank representation of solutions of time-dependent simulations of fluid dynamics using multi-dimensional tensor representations of solutions.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Exploratory Efforts to Constrain Geologic Material Properties from Remote Sensing Data: A Joint Study

Identification and characterization of underground events from surface or remote data requires a thorough understanding of the rock material properties. However, material properties usually come from borehole data, which is expensive and not always available. A potential alternative is to use topographic characteristics to approximate the strength, but this has never been done before quantitatively. Here we present the results from the first steps towards this goal. We have found that there are strong correlations between compressive and tensile strengths and slopes, but these correlations vary depending on data analysis details. Rugosity may be better correlated to strength than slope values. More comprehensive analyses are needed to fully understand the best method of predicting strength from topography for this area. We also found that misalignment of multiple GIS datasets can have a large influence on the ability to make interpretations. Lastly, these results will require further study in a variety of climatic conditions before being applicable to other sites.

42 ENGINEERING↗
DOE OSTI2024

Negative Medium-Voltage Direct Current Discharges in Air under Simulated Sub-Atmospheric Pressures for All-Electric Aircraft

The increase in the global temperature due to greenhouse gas emissions is a major concern to the world. To achieve the goal of zero emissions by 2050 in the USA the practical realization of all-electric vehicles, particularly all-electric aircraft (AEA), is important. For the design of electrical power systems (EPSs) in all-electric aircraft, a bipolar medium-voltage direct current (MVDC) system of ±5 kV is being investigated. However, several challenges manifest when using such voltages in a low-pressure environment. One of the main challenges is the partial discharge (PD) behavior of the insulation. It is important to study the PD behavior of the insulation by simulating the aviation environment in the lab. This work aimed to study the partial discharge behavior of air under a negative DC voltage in a needle-to-plane electrode geometry by simulating the aviation pressures in the lab. The partial discharge inception voltage (PDIV) and the breakdown voltage (BDV) show an obvious pressure-dependent variation. Regression analysis was performed to better understand the relationship between the PDIV and pressures. Plots were drawn for the average discharge current at each voltage step until breakdown. This paper’s findings can provide valuable insight into the design of EPS for an AEA. To the best of our knowledge, such a study has not been carried out to date.

air discharge↗
DOE OSTI2023

ProvSec: Open Cybersecurity System Provenance Analysis Benchmark Dataset with Labels

System provenance forensic analysis has been studied by a large body of research work. This area needs fine granularity data such as system calls along with event fields to track the dependencies of events. While prior work on security datasets has been proposed, we found a useful dataset of realistic attacks and details that are needed for high-quality provenance tracking is lacking. We created a new dataset of eleven vulnerable cases for system forensic analysis. It includes the full details of system calls including syscall parameters. Realistic attack scenarios with real software vulnerabilities and exploits are used. For each case, we created two sets of benign and adversary scenarios which are manually labeled for supervised machine-learning analysis. In addition, we present an algorithm to improve the data quality in the system provenance forensic analysis. We demonstrate the details of the dataset events and dependency analysis of our dataset cases.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Uses of Sensitivity/Uncertainty Techniques for Critical Experiment Design [Slides]

This presentation discusses the programming languages TSUNAMI and TSAR. It also provides a review of experimental designs using sensitivity analysis in regard to 7uPCX fuel design, fission product experiment analysis, MIRTE, and temperature dependent experiments at the Sandia Pulsed Reactor Facility (SPRF).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Modern insights into the mechanisms of neptunium oxalate decomposition

Neptunium oxalate (Np(C 2 O 4 ) 2 ·6H 2 O) is a historically relevant solid phase used in nuclear processing as a precursor for neptunium dioxide (NpO 2 ). Although Np oxalate has been synthesized and used for NpO 2 production for decades, the thermal decomposition mechanism of this phase remains poorly understood and has not been evaluated in over 30 years. Conflicting reports in historical literature suggest either a direct conversion from anhydrous oxalate to NpO 2 or a decomposition that includes the formation of Np carbonate or oxidized Np intermediate phases. In this work, we reexamine the decomposition pathway of Np(C 2 O 4 ) 2 ·6H 2 O using thermal analysis coupled with evolved gas analysis and temperature-dependent Raman spectroscopy to elucidate decomposition mechanisms and intermediate phases using modern analytical techniques. Thermal analysis revealed a three-stage decomposition process, including dehydration below 200 °C, oxalate breakdown between 170 and 370 °C, and NpO 2 formation by 500 °C. However, an unidentified plateau in the thermal data was observed during measurements. Raman spectroscopy confirmed the stages of decomposition, and in the analysis of potential intermediate phases, no carbonate phases or Np 2 O 5 were identified. Raman data suggest that residual oxalate or nonstoichiometric oxide are present during decomposition before pure NpO 2 is formed. These findings clarify aspects of the Np oxalate decomposition mechanism and address longstanding discrepancies in the literature, with a specific focus on Np-specific materials chemistry.

Lawson, Kathryn M. [Oak Ridge National Laboratory ↗
DOE OSTI2026

Isospin dependence of the nuclear EMC effect from a global QCD analysis

We perform a new global QCD analysis of unpolarized parton distribution functions (PDFs) in the nucleon from proton, deuteron, and A = 3 data, including recent measurements of He 3 / D and H 3 / D cross section ratios from the MARATHON experiment at Jefferson Lab. Simultaneously inferring the PDFs and nucleon off-shell corrections allows both to be determined consistently, without theoretical assumptions about the isospin dependence of nuclear effects. The analysis provides strong evidence for the need of nucleon off-shell corrections to describe the A = 3 data, with large isoscalar and a suggestion of nonzero isovector contributions in A ≤ 3 nuclei. We find that the extracted EMC ratios of nuclear to nucleon structure functions for A = 2 and 3 differ from those naively extrapolated from heavy nuclei down to low A .

Cocuzza, C. [William & Mary] (ORCID:00000003492292↗
DOE OSTI2026

Astrocyte Reactivity by Alcohol Dependence in the Central Amygdala

Astrocytes play essential roles in the brain, but prolonged insult can result in the loss or diminishment of homeostatic functions and increased neuroinflammatory response. The central amygdala (CeA) is an important limbic region in reward and stress responsivity as well as in the development of alcohol dependence. Using a multi-omics approach with Aldh1l1-EGFP/Rpl10a mice and the chronic intermittent ethanol – two-bottle choice exposure model, we have characterized the translational response of CeA astrocytes, as well as the proteomic and phosphoproteomic changes in dependent, non-dependent, and naïve mice. We identified astrocyte-specific alterations in neuroimmune functions and antioxidant/oxidative stress pathways in dependent animals while non-dependent EtOH drinking altered cytoskeletal plasticity related pathways. Proteomic analysis showed down-regulation of astrocyte physiological functions in dependent animals while phosphoproteomic analysis identified cytoskeleton remodeling in both dependent and non-dependent animals suggesting the development of a reactive astrocyte phenotype. Astrocyte morphological reconstruction showed increased CeA astrocyte complexity in dependent and non-dependent groups compared to naïve mice. The astrocyte-specific increase in neuroimmune functions, down-regulation of astrocyte homeostatic functions, alteration in protein phosphorylation-mediated cytoskeleton remodeling, and increased astrocyte complexity demonstrate EtOH induced astrocyte activation in the CeA and suggest the presence of both adaptive and maladaptive reactive astrocytes. These findings highlight the roles CeA astrocytes play in the progression of alcohol intake to dependence and are the first step in the identification of novel astrocyte-specific therapeutic approaches for alcohol use disorder through the potentiation of adaptive changes and inhibition of maladaptive changes in astrocytes.

Hashimoto, Joel↗
DOE OSTI2022

Vanilloid-dependent TRPV1 opening trajectory from cryo EM ensemble analysis

Single particle cryo-EM often yields multiple protein conformations within a single dataset, but experimentally deducing the temporal relationship of these conformers within a conformational trajectory is not trivial. Here, we use thermal titration methods and cryo-EM in an attempt to obtain temporal resolution of the conformational trajectory of the vanilloid receptor TRPV1 with resiniferatoxin (RTx) bound. Based on our cryo-EM ensemble analysis, RTx binding to TRPV1 appears to induce intracellular gate opening first, followed by selectivity filter dilation, then pore loop rearrangement to reach the final open state. This apparent conformational wave likely arises from the concerted, stepwise, additive structural changes of TRPV1 over many subdomains. Greater understanding of the RTx-mediated long-range allostery of TRPV1 could help further the therapeutic potential of RTx, which is a promising drug candidate for pain relief associated with advanced cancer or knee arthritis.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Stellar population analysis of MaNGA early-type galaxies: IMF dependence and systematic effects

We study systematics associated with estimating simple stellar population (SSP) parameters – age, metallicity [M/H], α-enhancement [α/Fe], and initial mass function (IMF) shape – and associated M * /L gradients, of elliptical slow rotators (E-SRs), fast rotators (E-FRs), and S0s from stacked spectra of galaxies in the MaNGA survey. These systematics arise from (i) how one normalizes the spectra when stacking; (ii) having to subtract emission before estimating absorption line strengths; (iii) the decision to fit the whole spectrum or just a few absorption lines; (iv) SSP model differences (e.g. isochrones, enrichment, IMF). The MILES+Padova SSP models, fit to the H β , 〈Fe〉, TiO 2SDSS , and [MgFe] Lick indices in the stacks, indicate that out to the half-light radius R e : (a) ages are younger and [α/Fe] values are lower in the central regions but the opposite is true of [M/H]; (b) the IMF is more bottom-heavy in the center, but is close to Kroupa beyond about R e /2; (c) this makes M * /L about 2 × larger in the central regions than beyond R e /2. While the models of Conroy et al. return similar [M/H] and [α/Fe] profiles, the age and (hence) M * /L profiles can differ significantly even for solar abundances and a Kroupa IMF; different responses to non-solar abundances and IMF parametrization further compound these differences. There are clear (model independent) differences between E-SRs, E-FRs, and S0s: younger ages and less enhanced [α/Fe] values suggest that E-FRs and S0s are not SSPs, but relaxing this assumption is unlikely to change their inferred M * /L gradients significantly.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Importance of Sample Handling and Preparation for Surface Analysis: A Summary of ISO Standard 20579 Part 1, Documenting and Reporting the Handling of Specimens Prior to Analysis

Reliable and reproducible analysis of surfaces is critically dependent on how samples have been collected, handled, and prepared before analysis. Although there are important, well-established general guidelines to minimize unintended alteration of the surfaces to be analyzed, specific handling steps depend on the nature of the samples and information desired. Assessments of the validity and reliability of the results require adequate information about sampling, handling, and processing. ISO standard 20579 part 1 describes the information to be recorded and reported for samples that are prepared or submitted for surface analysis. This paper summarizes elements of the standard, which includes annexes that justify and inform the sample handling processes. Also included is a checklist of information that needs to be recorded and reported and an appendix containing an example of a form that might be used to report the information.

AES↗