Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Storm/Quiet Ratio Comparisons Between TIMED/SABER NO (sup +)(v) Volume Emission Rates and Incoherent Scatter Radar Electron Densities at E-Region Altitudes

Broadband infrared limb emission at 4.3 microns is measured by the TIMED/SABER instrument. At night, these emission observations at E-region altitudes are used to derive the so called NO+(v) Volume Emission Rate (VER). NO+(v) VER can be derived by removing the background CO2(v3) 4.3 microns radiance contribution using SABER-based non-LTE radiation transfer models, and by performing a standard Abel inversion on the residual radiance. SABER observations show that NO+(v) VER is significantly enhanced during magnetic storms in accordance with increased ionization of the neutral atmosphere by auroral electron precipitation, followed by vibrational excitation of NO+ (i.e., NO+(v)) from fast exothermic ion-neutral reactions, and prompt infrared emission at 4.3 m. Due to charge neutrality, the NO+(v) VER enhancements are highly correlated with electron density enhancements, as observed for example by Incoherent Scatter Radar (ISR). In order to characterize the response of the storm-time E-region from both SABER and ISR measurements, a Storm/Quiet ratio (SQR) quantity is defined as a function of altitude. For SABER, the SQR is the ratio of the storm-to-quiet NO+(v) VER. SQR is the storm-to-quiet ratio of electron densities for ISR. In this work, we compare SABER and ISR SQR values between 100 to 120 km. Results indicate good agreement between these measurements. SQR values are intended to be used as a correction factor to be included in an empirical storm-time correction to the International Reference Ionosphere model at E-region altitudes.

Fernandez, J. R.↗

On the flux and the energy spectrum of interstellar ions in the solar system

The flux density of ions created by ionization of interstellar neutral particles in the solar system and picked up by the solar wind is calculated as a function of the neutral particles. For atomic hydrogen the flux density is estimated to exceed 10,000/sq cm/sec over the distance range from a few to nearly 100 AU. The velocity space distribution of the interstellar ions is calculated under the assumption of no significant energy diffusion but with inclusion of adiabatic effects as well as a possible strong pitch angle diffusion. The energy spectrum is highly nonthermal and much broader than that of the solar wind ions; interstellar protons are easily distinguishable from solar wind protons by their location in velocity space. If charge exchange is an important contributor to the ionization of hydrogen, the observed local intensity of interstellar protons should exhibit time variations correlated with the density changes of the solar wind stream structure.

Vasyliunas, V. M.↗

Effect of Heating on Turbulent Density Fluctuations and Noise Generation From High Speed Jets

Heated jets in a wide range of temperature ratios (TR), and acoustic Mach numbers (Ma) were investigated experimentally using far field microphones and a molecular Rayleigh scattering technique. The latter provided density fluctuations measurements. Two sets of operating conditions were considered: (1) TR was varied between 0.84 and 2.7 while Ma was fixed at 0.9; (2) Ma was varied between 0.6 and 1.48, while TR was fixed at 2.27. The implementation of the molecular Rayleigh scattering technique required dust removal and usage of a hydrogen combustor to avoid soot particles. Time averaged density measurements in the first set of data showed differences in the peripheral density shear layers between the unheated and heated jets. The nozzle exit shear layer showed increased turbulence level with increased plume temperature. Nevertheless, further downstream the density fluctuations spectra are found to be nearly identical for all Mach number and temperature ratio conditions. To determine noise sources a correlation study between plume density fluctuations and far field sound pressure fluctuations was conducted. For all jets the core region beyond the end of the potential flow was found to be the strongest noise source. Except for an isothermal jet, the correlations did not differ significantly with increasing temperature ratio. The isothermal jet created little density fluctuations. Although the far field noise from this jet did not show any exceptional trend, the flow-sound correlations were very low. This indicated that the density fluctuations only acted as a "tracer parameter" for the noise sources.

Panda, Jayanta↗

Dust, impact pits, and accreta on lunar rock 12054

The large variation in the areal density of meteoroid impact pits observed over the face of lunar rock chip 12054,54 was previously attributed to variable amounts of shielding of this chip by loosely bound dust. However, an examination of the directionality of flow of the disk and splash accreta on this chip now suggests that the regions with low areal densities of pits and disk accreta were geometrically shielded by a formerly overhanging part of the rock. The 'overhang' is postulated to have broken off during the return of this rock to earth. There remains, nevertheless, considerable evidence for shielding of rock and grain surfaces on the lunar surface by loosely bound dust. The areal extent and depth of deposition of dust is still poorly understood, however. Populations of disk (or pancake) accreta and 'solid' accreta that show evidence of melting are shown to be correlated with impact pit densities. The population of solid angular accreta with exteriors that exhibit little evidence of melting shows no correlation with impact pit densities.

Zook, H. A.↗

The Berkeley EUV/FUV Shuttle Telescope - Observations of dust reflection in the FUV

Observations by the Berkeley EUV/FUV Shuttle Telescope of the FUV reflection from dust clouds are reported. Spectra of the diffuse UV background from regions of low and high hydrogen column density have been taken. The intensity of the continuum correlates well with the column density of neutral hydrogen, and the slope of this correlation is interpreted with a simple model of optically thin scattering to obtain a measurement of a combination of the albedo and asymmetry parameter in the FUV.

Hurwitz, Mark↗

Estimation of old field ecosystem biomass using low altitude imagery

Color-infrared photography was used to evaluate the biomass of experimental plots in an old-field ecosystem that was treated with different levels of waste water from a sewage treatment facility. Cibachrome prints at a scale of approximately 1:1,600 produced from 35 mm color infrared slides were used to analyze density patterns using prepared tonal density scales and multicell grids registered to ground panels shown on the photograph. Correlations between mean tonal density and harvest biomass data gave consistently high coefficients ranging from 0.530 to 0.896 at the 0.001 significance level. Corresponding multiple regression analysis resulted in higher correlation coefficients. The results indicate that aerial infrared photography can be used to estimate standing crop biomass on waste water irrigated old field ecosystems. Combined with minimal ground truth data, this technique could enable managers of waste water irrigation projects to precisely time harvest of such systems for maximal removal of nutrients in harvested biomass.

Nor, S. M.↗

UAH Analysis of TIDE/PSI Data for ISTP Solar Maximum Extended Mission

During the course of this research, several investigations have been carried out at both high and low altitudes. The low altitude studies are those associated with perigee observations of ion field-aligned flows measured by POLAR/TIDE near 5000 km altitude. High altitude studies employed ion observations near apogee (above 6 R(sub E) geocentric). In both cases the observations occur at high latitudes, in or near the polar regions: the southern polar region for the low altitude studies and the northern polar region for the high altitude studies. A study of the relationship between field-aligned flow velocities, fluxes, and densities to convection speeds was published in the Journal of Atmospheric and Terrestrial Physics . Here we have demonstrated an anti-correlation between the 0+ densities and the convection speeds, and a correlation between the parallel upward velocities and the convection speeds, and have discussed these results as being compatible with the Cleft Ion Fountain concept for supplying O(sup +) ions to the polar cap magnetosphere. Another topic investigated was the relationship between TIDE-observed upward and downward parallel O(sup +) bulk velocities near 5000 km altitude over the southern polar regions, and near-simultaneous auroral observations by the Ultra-Violet Imager. We have prepared several overlaid plots of such auroral images across an MLT-ILAT dial plot of the polar regions with upward and downward velocities, as well as other parameters such as ion densities and fluxes. The overlaid plots show quite nicely how upward velocities and crossovers between upward and downward velocities occur in association with auroral forms, while downward flows are associated with dark regions of the polar cap.

Comfort, Richard H.↗

Pressure-fluctuation inputs and response of panels underlying attached and separated supersonic turbulent boundary layers

Results are presented for an investigation of surface pressure fluctuations and response of panels underlying attached and separated turbulent boundary layers and shock waves. Tests conducted at transonic and supersonic Mach numbers to 3.6 to study the pressure fields. Assorted fixed edge flat panels were tested at Mach numbers from 1.6 to 3.6 in attached and completely separated flow fields, and also in mixed flow with a step-induced shock wave oscillating on the panels. The surface pressure fluctuations are described in terms of broadband rms, spectral density, and spatial correlation information. The effectiveness of parameters for scaling the pressure fluctuations is also illustrated. Measurements of the amplitude and strain response of the panels are compared with response computations by the normal mode method of analysis.

Coe, C. F.↗

Multispectral signatures in relation to ground control signatures using nested sampling approach

The author has identified the following signficant results. An experiment was conducted to evaluate the feasibility of using ERTS-1 MSS imagery for spot transmission measurements on selected sites. Using the 15-unit gray scale on the 70 mm positive imagery as the base of comparison, a correlation was made between the transmittance measured at each site on the imagery and the radiance values (counts) recorded on CCT tape by the spacecraft over the same sites. The imagery was enlarged by a 750-watt projector and focused on a white cardboard screen 6 meters from the screen. Observations were made on 30 sub-sites which were pre-selected for their differing image brightness and total area; all are dried pond beds. Observations were also made on average gray backgrounds and a small lake. There was a very good correlation between the density values obtained from projected imagery and radiance values received by the detector on the spacecraft. A shorter experiment time and closer integration of gray scale and site readings would avoid the variation in lamp intensities that occurred.

Lyon, R. J. P.↗

Pressure-fluctuation inputs and response of panels underlying attached and separated supersonic turbulent boundary layers

Results of an investigation of surface pressure fluctuations and response of panels underlying attached and separated turbulent boundary layers and shock waves are summarized. Extensive tests of a large assortment of axisymmetric and two-dimensional models have been conducted at transonic and supersonic Mach numbers to 3.6 to study the pressure fields. Assorted fixed-edge flat panels have been tested at Mach numbers from 1.6 to 3.6 in attached and completely separated flow fields and also in mixed flow with a step induced shock wave oscillating on the panels. The surface pressure fluctuations are described in terms of broadband rms, spectral density, and spatial correlation information. The effectiveness of parameters for scaling the pressure fluctuations is also illustrated. Measurements of the amplitude and strain response of the panels are compared with response computations by the normal method of analysis.

Coe, C. F.↗

Modulation of low-energy galactic cosmic rays over the present solar cycle

Explorer satellite observations of modulations in the cosmic ray spectrum during the entire period of the solar cycle show intensity variations in the proton and alpha modulated spectra. A positive correlation between plasma density and variation in cosmic ray intensity is found that breaks during the transition period when higher energy intensity is decreasing as the solar activity increases. It is suggested that the alpha particles lead the proton particles during transition periods and thus make the lag time shorter for high rigidity near the solar maximum and the solar minimum.

Vanhollebeke, M. A.↗

ERTS-1 study of reservoirs in Kansas.

Single pass coverage over Cedar Bluff, Webster, Tuttle Creek, Milford, and Council Groves reservoirs is analyzed. The long-range goal of the study is to test the feasibility of monitoring reservoirs by satellite. It is hoped that results may eventually help to optimize reservoir management for use in flood control, agriculture, urban areas, and recreation. ERTS-1 imagery promises to be a very useful tool for studying reservoir turbidity patterns. Initial coverage indicates a strong qualitative correlation between film density and turbidity.

Yarger, H. L.↗

Plant size, etc., and aerial films

Chlorophyll concentration of chlorotic leaves, expressed as milligrams of chlorophyll per cubic centimeter of leaf volume, was positively correlated to film density readings. Images on the film became darker as chlorophyll concentration increased. Plant size was not related to density readings.

Gausman, H.↗

Classification of wetlands vegetation using small scale color infrared imagery

A classification system for Chesapeake Bay wetlands was derived from the correlation of film density classes and actual vegetation classes. The data processing programs used were developed by the Laboratory for the Applications of Remote Sensing. These programs were tested for their value in classifying natural vegetation, using digitized data from small scale aerial photography. Existing imagery and the vegetation map of Farm Creek Marsh were used to determine the optimal number of classes, and to aid in determining if the computer maps were a believable product.

Williamson, F. S. L.↗

Remote sensing of snowpack density using shortwave radiation

Albedo or satellite radiance measurements can be used to estimate average snowpack density by means of a multiple linear equation. The in situ data equation predicted density with a correlation (sq r) of 0.79 and a standard error of 0.027 gm/cu cm. The data from LANDSAT-1 were not as significant in a similar equation, possibly because of the large field of view.

Mcmillan, M. C.↗

Separated-flow unsteady pressures and forces on elastically responding structures

Broadband rms, spectral density, and spatial correlation information that characterizes the fluctuating pressures and forces that cause aircraft buffet is presented. The main theme of the paper in describing buffet excitation is to show the effects of elasticity. Data are presented that were obtained in regions of separated flow on wings of wind-tunnel models of varying stiffness and on the wing of a full scale aircraft. Reynolds number effects on the pressure fluctuations are also discussed.

Coe, C. F.↗

Separated-flow unsteady pressures and forces on elastically responding structures

Broadband rms, spectral density, and spatial correlation information that characterizes the fluctuating pressures and forces that cause aircraft buffet is presented. The main theme is to show the effects of elasticity. In order to do so, data are presented that were obtained in regions of separated flow on wings of wind-tunnel models of varying stiffness and on the wing of a full-scale aircraft. Reynolds number effects on the pressure fluctuations are also discussed.

Coke, C. F.↗