Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data similarity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Speckle interferometry of asteroids. III - 511 Davida and its photometry

Photometric interferometry data on the fifth largest minor planet, 511 Davida, are used to generate orbital elements and physical dimensions. The Seward 2.3 m telescope was employed to obtain the speckle interferometric data. The asteroid was assumed to be a uniform-surfaced triaxial ellipsoid rotating about its shortest axis. A simultaneous amplitude-magnitude aspect method is defined for determining the pole position of the object, which is calculated to be within 4 deg of (307 deg; +32). A weighted amplitude aspect relation provides similar data. The albedos are estimated to lie within the range 0.24-0.42, and an a/b axial ratio of 0.97-1.66 is projected. The variations in the photometric albedos are taken as evidence of a nonuniform surface, a conclusion similar to that reached after earlier photometric measurements of the asteroid Herculina.

Drummond, J. D.↗
DOE OSTI2024

Fluorescence-mediated postcollision interaction in x-ray photoionization of the Xe 𝐾 edge

Postcollision interaction (PCI) in near-threshold photoionization of the K shell of atomic Xe is investigated with hard-x-ray synchrotron radiation. Applying Auger electron spectroscopy, line-shape distortion is monitored in the K-L 2 → L 2 M 4,5 M 4,5 decay channel, where the initial K-L 2 (Kα 2 ) x-ray-emission step mediates the emission of the two continuum electrons. The K-edge result is compared to similar data obtained on direct L 2 M 4,5 M 4,5 decay at the L 2 edge without x-ray-emission. In conclusion, it is found that the evolution of the PCI shift with excess photon energy is very similar at both edges, but a subtle decrease in the PCI shift is observable at the K edge due to the effect of the ultrafast x-ray emission step delaying the PCI energy exchange by a few attoseconds.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS2008

Completion of the Edward Air Force Base Statistical Guidance Wind Tool

The goal of this task was to develop a GUI using EAFB wind tower data similar to the KSC SLF peak wind tool that is already in operations at SMG. In 2004, MSFC personnel began work to replicate the KSC SLF tool using several wind towers at EAFB. They completed the analysis and QC of the data, but due to higher priority work did not start development of the GUI. MSFC personnel calculated wind climatologies and probabilities of 10-minute peak wind occurrence based on the 2-minute average wind speed for several EAFB wind towers. Once the data were QC'ed and analyzed the climatologies were calculated following the methodology outlined in Lambert (2003). The climatologies were calculated for each tower and month, and then were stratified by hour, direction (10" sectors), and direction (45" sectors)/hour. For all climatologies, MSFC calculated the mean, standard deviation and observation counts of the Zminute average and 10-minute peak wind speeds. MSFC personnel also calculated empirical and modeled probabilities of meeting or exceeding specific 10- minute peak wind speeds using PDFs. The empirical PDFs were asymmetrical and bounded on the left by the 2- minute average wind speed. They calculated the parametric PDFs by fitting the GEV distribution to the empirical distributions. Parametric PDFs were calculated in order to smooth and interpolate over variations in the observed values due to possible under-sampling of certain peak winds and to estimate probabilities associated with average winds outside the observed range. MSFC calculated the individual probabilities of meeting or exceeding specific 10- minute peak wind speeds by integrating the area under each curve. The probabilities assist SMG forecasters in assessing the shuttle FR for various Zminute average wind speeds. The A M ' obtained the processed EAFB data from Dr. Lee Bums of MSFC and reformatted them for input to Excel PivotTables, which allow users to display different values with point-click-drag techniques. The GUI was created from the PivotTables using VBA code. It is run through a macro within Excel and allows forecasters to quickly display and interpret peak wind climatology and probabilities in a fast-paced operational environment. The GUI was designed to look and operate exactly the same as the KSC SLF tool since SMG forecasters were already familiar with that product. SMG feedback was continually incorporated into the GUI ensuring the end product met their needs. The final version of the GUI along with all climatologies, PDFs, and probabilities has been delivered to SMG and will be put into operational use.

Dreher, Joseph G.↗
DOE OSTI2026

Advanced Semi-Supervised Learning with Uncertainty Estimation for Phase Identification in Distribution Systems

The integration of advanced metering infrastructure (AMI) into power distribution networks generates valuable data for tasks such as phase identification; however, the limited and unreliable availability of labeled data in the form of customer phase connectivity presents challenges. To address this issue, we propose a semi-supervised learning (SSL) framework that effectively leverages labeled and unlabeled data. Our approach incorporates self-training, label spreading, and Bayesian neural networks (BNNs) to enhance phase identification with AMI data. Our method uses an ensemble of multilayer perceptron classifiers in a self-training setup, iteratively adding high-confidence pseudo-labels to improve robustness. We also apply label spread to propagate labels based on data similarity, which enhances generalization across diverse distributions. In addition, we employ a BNNs with uncertainty estimation, boosting confidence in predictions and reducing phase identification errors. In our case study, we achieved approximately 98% +/- 0.08 accuracy with uncertainty using minimal and unreliable labeled data from a real U.S. utility, Duquesne Light Company. Our SSL approach, combined with uncertainty estimation, provides an efficient solution for phase identification in AMI data, ultimately improving the reliability of smart grid applications.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2026

Advanced Semi-Supervised Learning With Uncertainty Estimation for Phase Identification in Distribution Systems

The integration of advanced metering infrastructure (AMI) into power distribution networks generates valuable data for tasks such as phase identification; however, the limited and unreliable availability of labeled data in the form of customer phase connectivity presents challenges. To address this issue, we propose a semi-supervised learning (SSL) framework that effectively leverages labeled and unlabeled data. Our approach incorporates self-training, label spreading, and Bayesian neural networks (BNNs) to enhance phase identification with AMI data. Our method uses an ensemble of multilayer perceptron classifiers in a self-training setup, iteratively adding high-confidence pseudo-labels to improve robustness. We also apply label spread to propagate labels based on data similarity, which enhances generalization across diverse distributions. In addition, we employ a BNNs with uncertainty estimation, boosting confidence in predictions and reducing phase identification errors. In our case study, we achieved approximately 98% +/- 0.08 accuracy with uncertainty using minimal and unreliable labeled data from a real U.S. utility, Duquesne Light Company. Our SSL approach, combined with uncertainty estimation, provides an efficient solution for phase identification in AMI data, ultimately improving the reliability of smart grid applications.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1973

Evaluation of ERTS imagery for mapping and detection of changes of snowcover land and on glaciers

The percentage of snowcover area on specific drainage basins was measured from ERTS imagery by video density slicing with a repeatability of 4 percent of the snowcovered area. Data from ERTS images of the melt season snowcover in the Thunder Creek drainage basin in the North Cascades were combined with existing hydrologic and meteorologic observations to enable calculation of the time distribution of the water stored in this mountain snowpack. Similar data could be used for frequent updating of expected inflow to reservoirs. Equivalent snowline altitudes were determined from area measurements. Snowline altitudes were also determined by combining enlarged ERTS images with maps with an accuracy of about 60 m under favorable conditions. Ability to map snowcover or to determine snowline altitude depends primarily on cloud cover and vegetation and secondarily on slope, terrain roughness, sun angle, radiometric fidelity, and amount of spectral information available.

Meier, M. F.↗
DOE OSTI2024

Impact of Systematic Modeling Uncertainties on Kilonova Property Estimation

The precise atomic structure and therefore the wavelength-dependent opacities of lanthanides are highly uncertain. This uncertainty introduces systematic errors in modeling transients like kilonovae and estimating key properties such as mass, characteristic velocity, and heavy metal content. Here, we quantify how atomic data from across the literature as well as choices of thermalization efficiency of r-process radioactive decay heating impact the light curve and spectra of kilonovae. Specifically, we analyze the spectra of a grid of models produced by the radiative transfer code Sedona that span the expected range of kilonova properties to identify regions with the highest systematic uncertainty. Our findings indicate that differences in atomic data have a substantial impact on estimates of lanthanide mass fraction, spanning approximately 1 order of magnitude for lanthanide-rich ejecta, and demonstrate the difficulty in precisely measuring the lanthanide fraction in lanthanide-poor ejecta. Mass estimates vary typically by 25%–40% for differing atomic data. Similarly, the choice of thermalization efficiency can affect mass estimates by 20%–50%. Observational properties such as color and decay rate are highly model dependent. Velocity estimation, when fitting solely based on the light curve, can have a typical error of ∼100%. Atomic data of light r-process elements can strongly affect blue emission. Even for well-observed events like GW170817, the total lanthanide production estimated using different atomic data sets can vary by a factor of ∼6.

Gravitational wave sources↗
NASA NTRS2007

The Application of NASA Technology to Public Health

NASA scientists have a history of applying technologies created to handle satellite data to human health at various spatial scales. Scientists are now engaged in multiple public health application projects that integrate NASA satellite data with measures of public health. Such integration requires overcoming disparities between the environmental and the health data. Ground based sensors, satellite imagery, model outputs and other environmental sources have inconsistent spatial and temporal distributions. The MSFC team has recognized the approach used by environmental scientists to fill in the empty places can also be applied to outcomes, exposures and similar data. A revisit to the classic epidemiology study of 1854 using modern day surface modeling and GIS technology, demonstrates how spatial technology can enhance and change the future of environmental epidemiology. Thus, NASA brings to public health, not just a set of data, but an innovative way of thinking about the data.

Rickman, Douglas L.↗
NASA NTRS1973

Evaluate ERTS imagery for mapping and detection of changes of snowcover on land and on glaciers

The author has identified the following significant results. The percentage of snow cover area on specific drainage basins was measured from ERTS-1 imagery by video density slicing with a repeatability of 4 percent of the snow covered area. Data from ERTS-1 images of the melt season snow cover in the Thunder Creek drainage basin in the North Cascades were combined with existing hydrologic and meteorologic observations to enable calculations of the time distribution of the water stored in this mountain snowpack. Similar data could be used for frequent updating of expected inflow to reservoirs. Equivalent snowline altitudes were determined from area measurements. Snowline altitudes were also determined by combining enlarged ERTS-1 images with maps. ERTS-1 imagery was also successfully used to measure glacier accumulation area ratios for a small test basin.

Meier, M. F.↗
NASA NTRS1984

Spatial analysis in recreation resource management for the Berlin Lake Reservoir Project

Spatial analysis of geographic information systems and the acquisition and use of remotely-sensed data within the U.S. Army Corps of Engineers is an emerging Technology Work units have been developed under te Remote Sensing Research and Development Program, which are most relevant to the productive needs of the Corps in both the military and civil works missions. Corps participation in the SPOT simulation champaign is one such example of this research. This paper describes the application of spatial analysis and remote sensing in recreation resource managmaster planning at the Berlin Lake Reservoir Project within the Pittsburgh District. SPOT simulator data was acquired over Berlin Lake, Site No. 10, on July 8, 1983. The first part of this paper describes the background of the U.S. Army Corps of Engineers and the Berlin Lake project, the geographic information system being developed, and the planned use of SPOT and similar data. The remainder of the paper describes the results on an analysis of the simulated SPOT data conducted at the NASA Goddard Institut for Space Studies.

Edwardo, H. A.↗
NASA NTRS1990

Unbound molecular complexes in M33

The HI content of the nearby spiral galaxy M33 (d approx. 0.8 Mpc) has been the subject of many detailed studies (most recently Deul and van der Hulst 1987), but similar data on the molecular gas component has been lacking. This galaxy is currently undergoing vigorous high-mass star formation, as evidenced by the many OB associations and HII regions, and so is expected to possess at least some molecular gas. Interferometric studies have detected molecular clouds similar to Galactic Giant Molecular Clouds (GMCs) (Boulanger et al. 1988; Wilson et al. 1988). Researchers have recently mapped the nuclear region of M33 in the CO J=1-0 line with a 12 m telescope (half power beam width 55 inches approx. 210 pc) out to a radius of 3.5 minutes in order to trace the detailed distribution of the molecular gas. The resulting map reveals six large complexes with diameters of 200 to 400 pc. Interferometer observations of these regions have resolved them into individual molecular clouds similar to Galactic GMCs (Wilson et al. 1988). The complexes shown are much larger than individual Galactic GMCs (Sanders, Scoville, and Solomon 1985), but are somewhat smaller on average than the large associations seen in the grand-design spiral galaxy M51 (Rand and Kulkarni 1989). If we extend the velocity-diameter relation observed for Galactic GMCs to these larger structures, the predicted velocity widths are a factor of 1.5 to 3 times greater than the observed full-width half-maximum velocities (13 to 29 km (s-1). The peak brightness temperatures are approx. 0.2 K, at least a factor of 10 lower than what is observed for Galactic GMCs. If these large structures are made up of objects similar to Galactic GMCs, the area filling factor of the small clouds is roughly 10 percent. These results suggest that these complexes are not very large GMCs, but rather are associations of many individual GMCs or GMCs embedded in a diffuse gas component.

Wilson, Christine D.↗
NASA NTRS2018

GeneLab Analysis Working Group Kick-Off Meeting

Goals to achieve for GeneLab AWG - GL vision - Review of GeneLab AWG charter Timeline and milestones for 2018 Logistics - Monthly Meeting - Workshop - Internship - ASGSR Introduction of team leads and goals of each group Introduction of all members Q/A Three-tier Client Strategy to Democratize Data Physiological changes, pathway enrichment, differential expression, normalization, processing metadata, reproducibility, Data federation/integration with heterogeneous bioinformatics external databases The GLDS currently serves over 100 omics investigations to the biomedical community via open access. In order to expand the scope of metadata record searches via the GLDS, we designed a metadata warehouse that collects and updates metadata records from external systems housing similar data. To demonstrate the capabilities of federated search and retrieval of these data, we imported metadata records from three open-access data systems into the GLDS metadata warehouse: NCBI's Gene Expression Omnibus (GEO), EBI's PRoteomics IDEntifications (PRIDE) repository, and the Metagenomics Analysis server (MG-RAST). Each of these systems defines metadata for omics data sets differently. One solution to bridge such differences is to employ a common object model (COM) to which each systems' representation of metadata can be mapped. Warehoused metadata records are then transformed at ETL to this single, common representation. Queries generated via the GLDS are then executed against the warehouse, and matching records are shown in the COM representation (Fig. 1). While this approach is relatively straightforward to implement, the volume of the data in the omics domain presents challenges in dealing with latency and currency of records. Furthermore, the lack of a coordinated has been federated data search for and retrieval of these kinds of data across other open-access systems, so that users are able to conduct biological meta-investigations using data from a variety of sources. Such meta-investigations are key to corroborating findings from many kinds of assays and translating them into systems biology knowledge and, eventually, therapeutics.

GeneLab↗
NASA NTRS1977

Comparing soil boundaries delineated by digital analysis of multispectral scanner data from high and low spatial resolution systems

The author has identified the following significant results. Computer-aided analysis techniques used with aircraft MSS data showed that the spatial resolution was sufficient to recognize each soil mapping unit of the test site. Some difficulties occurred where different soil series were intricately mixed, and this mixture showed as a separate spectral mapping unit, or where the difference between two soils depended on the depth of silty surface material. Analysis of LANDSAT data with computer-aided techniques showed that it was not possible to find spectrally homogeneous soil features of the seven soil series on the 40 ha test site on the digital display or on a picture print map. Cluster techniques could be used on an extended test area to group spectrally similar data points into cluster classes.

Kristof, S. J.↗
NASA NTRS1998

Passive Microwave Spectral Imaging of Amospheric Structure

The primary objective of this research was to improve the scientific foundation necessary to full realization of the meteorological potential of the NOAA Advanced Microwave Sounding Unit (AMSU) recently first launched on the NOAA-15 satellite in May, 1998. These advances were made in four main areas: (1) improvements, based on aircraft observations, in the atmospheric transmittance expressions used for interpreting AMSU and similar data; (2) development of neural network retrieval methods for cloud top altitude estimates of approximately 1-km accuracy under cirrus shields--the altitude is that of the larger ice particles aloft, which is related to precipitation rate; (3) analysis of early AMSU flight data with respect to its precipitation sensitivity and fine-scale thermal structure; and (4) improvements to the 54-GHz and 118-GHz MTS aircraft imaging spectrometer now operating on the NASA ER-2 aircraft. More specifically, the oxygen transmittance expressions near 118 GHz were in better agreement with aircraft data when the temperature dependence exponent of the 118.75-GHz linewidth was increased from the MPM92 value (Liebe et al., 1992) of 0.8 to 0.97+/-0.03. In contrast, the observations 52.5-55.8 GHz were consistent with the MPM92 model. Neural networks trained on comparisons of 118-GHz spectral data and coincident stereoscopic video images of convective cells observed from 20-km altitude yielded agreement in their peak altitudes within as little as 1.36 km rms, much of which is stereoscopic error. Imagery using these methods produced useful characterizations for Cyclone Oliver in 1993 and other storms (Schwartz et al., 1996; Spina et al., 1998). Similar neural network techniques yielded simulated rms errors in relative humidity retrievals of 6-14 percent over ocean and 6-15 percent over land at pressure levels from 1013 to 131 mbar (Cabrera-Mercader and Staelin, 1995).

Staelin, David H.↗
NASA NTRS1983

Uppermantle anisotropy and the oceanic lithosphere

Published Rayleigh and Love wave phase and group velocity data have been inverted taking into account sphericity, anelastic dispersion, and transverse isotropy. For a PREM-type modular parameterization, the thickness of the high velocity mantle seismic lithosphere (LID) varies in thickness from about 30 km for young ocean to about 50 km for old ocean, much less than previous estimates based on isotropic inversion of similar data. This LID thickness is comparable to the elastic or flexural thickness found from studies of seamount loading and flexure at trenches, suggesting that the thickness of the lithosphere may be controlled by mineralogy, composition, or crystal orientation rather than by temperature alone.

Anderson, D. L.↗
NASA NTRS1976

Inelastic scattering of 61 MeV protons by pb-207

Differential cross sections for the excitation of the first four neutron-hole states and the doublet at 2.61 MeV by 61.2 MeV protons were measured. The data are analyzed in terms of both a purely collective model description and a microscopic model supplemented by macroscopic core polarization. A realistic two-body interaction is used and knock-on amplitudes are included. Core polarization is found to be important but represents a relatively smaller contribution than in most nuclei previously studied. A parallel analysis of similar data at lower proton bombarding energies reveals a surprisingly strong energy dependence of the reaction mechanisms.

Owais, M.↗
NASA NTRS1997

Scientific Visualization in High Speed Network Environments

In several cases, new visualization techniques have vastly increased the researcher's ability to analyze and comprehend data. Similarly, the role of networks in providing an efficient supercomputing environment have become more critical and continue to grow at a faster rate than the increase in the processing capabilities of supercomputers. A close relationship between scientific visualization and high-speed networks in providing an important link to support efficient supercomputing is identified. The two technologies are driven by the increasing complexities and volume of supercomputer data. The interaction of scientific visualization and high-speed networks in a Computational Fluid Dynamics simulation/visualization environment are given. Current capabilities supported by high speed networks, supercomputers, and high-performance graphics workstations at the Numerical Aerodynamic Simulation Facility (NAS) at NASA Ames Research Center are described. Applied research in providing a supercomputer visualization environment to support future computational requirements are summarized.

Vaziri, Arsi↗
NASA NTRS2007

Washington D.C. Lightning Mapping Array Demonstration Project Risk Reduction for GOES Lightning Mapper Data

A 10-site, ground-based total lightning mapping array (LMA) has been installed in the Washington D.C. metropolitan area in 2006. The total lightning data from DC LMA are being processed in real-time and derived products are being provided to the forecasters of the National Weather Service (NWS) forecast office in Sterling, Virginia. The NWS forecasters are using the products to monitor convective activity along with conventional radar and satellite products. Operational experience with these products is intended to inform decision making in how to best utilize in NWS operations similar data available from the GOES Lightning Mapper. The paper will discuss specifics of the LMA as well as proposed research into use of total lightning data in predicting and warning for cloud-to-ground lightning.

Smith, Stephan B.↗