Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “critical exponents”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

On the trapped magnetic moment in type-II superconductors

In this article, measurements of the trapped (remanent) magnetic moment, M trap (H) , when a small magnetic field H is turned off after cooling below the superconducting transition temperature, T c , or ramping a magnetic field up and down after cooling in a zero magnetic field, offer substantial advantages in difficult cases of small samples and large field-dependent backgrounds, which is relevant for hydrogen-based ultra-high-T c superconductors (UHTS). Until recently, there was no need for a separate paper on the trapped magnetic flux for well-known critical-state models due to the simplicity of the physics involved. However, recent publications showed the need for such an analysis. This note summarizes the expectations for the Bean model with constant critical current density and the Kim model with field-dependent critical currents. It is shown that if the trapped moment is fitted to the power law, M trap $\propto$ H a , the fixed exponent α = 2 is exact for the Bean model, while Kim models show a wide interval of possible values, 2$\leqslant$a$\leqslant$4. Furthermore, accounting for reversible magnetization expands the range of possible exponents to 1$\leqslant$a$\leqslant$4. In addition, demagnetizing factors are essential and make the trapped moment orientation dependent even in isotropic materials. As a concrete application, it is shown that flux trapping experiments performed on H 3 S UHTS compounds can be well described using this generalized approach, lending further support to the type-II superconducting nature of H 3 S under ultra-high pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Two-pion femtoscopic correlations in Be+Be collisions at $\sqrt{s_{\text {NN}}} = 16.84$ GeV measured by the NA61/SHINE at CERN

This paper reports measurements of two-pion femtoscopic correlations in Be+Be collisions at a beam momentum of 150$A\,\hbox {GeV}\!/\!c$ (energy available in the center-of-mass system for nucleon pair $\sqrt{s_{\text {NN}}} = 16.84$ GeV) by the NA61/SHINE experiment at the CERN SPS accelerator. The obtained momentum space correlation functions can be well described by a Lévy distributed source model. The transverse mass dependence of the Lévy source parameters is presented, and their possible theoretical interpretations are discussed. The results show that the Lévy exponent $\alpha $ is approximately constant as a function of $m_{\text {T}}$ , and far from both the Gaussian case of $\alpha = 2$ or the conjectured value at the critical endpoint, $\alpha = 0.5$. The radius scale parameter R shows a slight decrease in $m_{\text {T}}$ , which can be explained as a signature of transverse flow. Finally, an approximately constant trend of the intercept parameter $\lambda $ as a function of $m_{\text {T}}$ was observed, similar to previous NA44 S + Pb results (obtained with a Gaussian approximation, but unlike RHIC results).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1990

Critical-point analysis of the liquid-vapor interfacial surface tension

The interfacial surface tension of the liquid-vapor system is analyzed near the critical point in a manner similar to bulk thermodynamic critical-point analyses. This is accomplished by a critical-point analysis of the single-phase hard-wall surface tension. Both a Landau expansion and a scaling theory equation of state are investigated. Some general exponent relations are derived and, in addition, some thermodynamically defined correlation lengths are discussed.

Salvino, R. E.↗
DOE OSTI2026

Intermediate time sub-diffusion and stress relaxation in ring polymer melts

The slow dynamics of non-concatenated ring melts remains a frontier problem in polymer science with implications for many soft material environments including cellular biophysics. Here, in this work, we report large-scale simulations of model ring melts that analyze the monomer and center-of-mass (CM) mean square displacements (MSD) and stress relaxation function on intermediate time and length scales. The degree of dynamical slowing down is characterized by the maximally sub-diffusive fractional time scaling exponents. The data span an exceptionally wide range of ring degrees of polymerization and stiffnesses and are not successfully organized based on the classic measure linear chain entanglement, N/N e . Rather, we find that the crossover degree of polymerization, N D , based on ring macromolecular caging that successfully allows master curves to be constructed for the long-time CM self-diffusion constant also collapses these temporal dynamic scaling exponents. Different properties display different exponents and exhibit one or two regimes of linear variation with the logarithm of N D / N . A distinct crossover of the CM-MSD and stress relaxation exponents emerges at sufficiently large N or stiffness that is not found for the monomer MSD, indicating a novel form of dynamic decoupling. This crossover aligns with the predicted critical degree of polymerization for transitioning from a weak to strong caging regime, indicative of activated transport. The latter may reflect the emergence of an intermolecular collective contribution to stress in analogy with dense soft colloidal matter. Suggestions are made for future theoretical work to address the rich patterns of behavior discovered.

Anomalous diffusion↗
NASA NTRS1999

Viscoelasticity of Xenon near the Critical Point

Using a novel, overdamped, oscillator flown aboard the Space Shuttle, we measured the viscosity of xenon near the liquid-vapor critical point in the frequency range 2 Hz less than or equal to f less than or equal to 12 Hz. The measured viscosity divergence is characterized by the exponent z(sub eta) = 0.0690 +/- 0.0006, in agreement with the value z(sub eta) = 0.067 +/- 0.002 calculated from a two-loop perturbation expansion. Viscoelastic behavior was evident when t = (T - T(sub c))/T(sub c) less than 10(exp -5) and dominant when t less than 10(exp -6), further from T(sub c) than predicted. Viscoelastic behavior scales as Af(tau) where tau is the fluctuation decay time. The measured value of A is 2.0 +/- 0.3 times the result of a one-loop calculation. (Uncertainties stated are one standard uncertainty.)

Berg, Robert F.↗
DOE OSTI2020

Large-Grained Cylindrical Block Copolymer Morphologies by One-Step Room-Temperature Casting

We report a facile method of ordering block copolymer (BCP) morphologies in which the conventional two-step casting and annealing steps are replaced by a single-step process where microphase separation and grain coarsening are seamlessly integrated within the casting protocol. This is achieved by slowing down solvent evaporation during casting by introducing a non-volatile solvent into the BCP casting solution what effectively prolongs the duration of the grain-growth phase. We demonstrate the utility of this solvent evaporation annealing (SEA) method by producing well-ordered large molecular-weight BCP thin films in a total processing time shorter than 3 minutes without resorting to any extra laboratory equipment other than a basic casting-device i.e., spin- or blade-coater. By analyzing the morphologies of the quenched samples, we identify a relatively narrow range of polymer concentration in the wet film, just above the order-disorder concentration, to be critical for obtaining large-grained morphologies. This finding is corroborated by the analysis of the grain-growth kinetics of horizontally-oriented cylindrical domains where relatively large growth exponents (1/2) are observed, indicative of a more rapid defect-annihilation mechanism in the concentrated BCP solution than in thermally-annealed BCP melts. Furthermore, the analysis of temperature-resolved kinetics data allows us to calculate the Arrhenius activation energy of the grain-coarsening in this one-step BCP ordering process.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Detection of Damage Inducing Impact Events in Vibration Test Fixtures Using Holder Exponents

The Shock and Vibration team within the Test Engineering group at Los Alamos National Laboratory (LANL) aids in the development and qualification of weapon systems for the United States Department of Energy (DOE). Performing tests that replicate shock and vibration environments representative of a weapon’s lifetime is critical in ensuring safety, survivability, and reliability. A key factor in shock and vibration testing is accurate representation of the weapon’s boundary conditions in its end use configuration. The boundary conditions representative of a reentry body in flight are particularly difficult to replicate on an electrodynamic shaker. When executing shock and vibration tests on a reentry body, two system axes are tested with the system in a cantilevered configuration. This cantilevered testing configuration results in a moment load being applied to the system while undergoing vibration environments. A special fixture, known as the Flex-Web, was developed to decouple this moment load from the reentry body in order to more accurately represent real world boundary conditions while replicating flight environments.

42 ENGINEERING↗
NASA NTRS2002

Creep Behavior of Near-Stoichiometric Polycrystalline Binary NiAl

New and published constant load creep and constant engineering strain rate data on near-stoichiometric binary NiAl in the intermediate temperature range 700 to 1300 K are reviewed. Both normal and inverse primary creep curves are observed depending on stress and temperature. Other characteristics relating to creep of NiAl involving grain size, stress and temperature dependence are critically examined and discussed. At stresses below 25 MPa and temperatures above 1000 K, a new grain boundary sliding mechanism was observed with n approx. 2, Qc approx. 100 kJ/ mol and a grain size exponent of about 2. It is demonstrated that Coble creep and accommodated grain boundary sliding models fail to predict the experimental creep rates by several orders of magnitude.

Raj, S. V.↗
DOE OSTI2023

Fog Intermittency and Critical Behavior

The intermittency of fog occurrence (the switching between fog and no-fog) is a key stochastic feature that plays a role in its duration and the amount of moisture available. Here, fog intermittency is studied by using the visibility time series collected during the month of July 2022 on Sable Island, Canada. In addition to the visibility, time series of air relative humidity and turbulent kinetic energy, putative variables akin to the formation and breakup conditions of fog, respectively, are also analyzed in the same framework to establish links between fog intermittency and the underlying atmospheric variables. Intermittency in the time series is quantified with their binary telegraph approximations to isolate clustering behavior from amplitude variations. It is shown that relative humidity and turbulent kinetic energy bound many stochastic features of visibility, including its spectral exponent, clustering exponent, and the growth of its block entropy slope. Although not diagnostic, the visibility time series displays features consistent with Pomeau–Manneville Type-III intermittency in its quiescent phase duration PDF scaling (−3/2), power spectrum scaling (−1/2), and signal amplitude PDF scaling (−2). The binary fog time series exhibits properties of self-organized criticality in the relation between its power spectrum scaling and quiescent phase duration distribution.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Ultra‐Uniform Nanocrystalline Materials via Two‐Step Sintering

Abstract Nanocrystalline materials with superior properties are of great interest. Much is discussed about obtaining nanograins, but little is known about maintaining grain‐size uniformity that is critical for reliability. An especially intriguing question is whether it is possible to achieve a size distribution narrower than what Hillert theoretically predicted for normal grain growth, a possibility suggested—for growth with a higher growth exponent—by the generalized mean‐field theory of Lifshitz, Slyozov, Wagner (LSW), and Hillert but never realized in practice. Following a rationally designed two‐step sintering route, it has been made possible in bulk materials by taking advantage of the large growth exponent in the intermediate sintering stage to form a uniform microstructure despite residual porosity, and freezing the grain growth thereafter while continuing densification to reach full density. The bulk dense Al 2 O 3 ceramic thus obtained has an average grain size of 34 nm and a size distribution much narrower than Hillert's prediction. Bulk Al 2 O 3 with a grain‐size distribution narrower than the particle‐size distribution of starting powders is also demonstrated, as are highly uniform bulk engineering metals (refractory Mo and W‐Re alloy) and complex functional ceramics (BaTiO 3 ‐based alloys with superior dielectric strength and energy capacity).

Dong, Yanhao↗
DOE OSTI2021

Dirac fast scramblers

In this work, we introduce a family of Gross-Neveu-Yukawa models with a large number of fermion and boson flavors as higher dimensional generalizations of the Sachdev-Ye-Kitaev model. The models may be derived from local lattice couplings and give rise to Lorentz invariant critical solutions in 1+1 and 2+1 dimensions. These solutions imply anomalous dimensions of both bosons and fermions tuned by the number ratio of boson to fermion flavors. In 1+1 dimension the solution represents a stable critical phase, while in 2+1 dimension it governs a quantum phase transition. We compute the out of time order correlators in the 1+1 dimensional model, showing that it exhibits growth with the maximal Lyapunov exponent λ L =2πT in the low temperature limit.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Effects of Lower Troposphere Vertical Mixing on Simulated Clouds and Precipitation Over the Amazon During the Wet Season

Planetary boundary layer (PBL) schemes parameterize unresolved turbulent mixing within the PBL and free troposphere (FT). Previous studies reported that precipitation simulation over the Amazon in South America is quite sensitive to PBL schemes and the exact relationship between the turbulent mixing and precipitation processes is, however, not disentangled. In this study, regional climate simulations over the Amazon in January–February 2019 are examined at process level to understand the precipitation sensitivity to PBL scheme. The focus is on two PBL schemes, the Yonsei University (YSU) scheme, and the asymmetric convective model v2 (ACM2) scheme, which show the largest difference in the simulated precipitation. During daytime, while the FT clouds simulated by YSU dissipate, clouds simulated by ACM2 maintain because of enhanced moisture supply due to the enhanced vertical moisture relay transport process: (a) vertical mixing within PBL transports surface moisture to the PBL top, and (b) FT mixing feeds the moisture into the FT cloud deck. Due to the thick cloud deck over Amazon simulated by ACM2, surface radiative heating is reduced and consequently the convective available potential energy is reduced. As a result, precipitation is weaker from ACM2. Two key parameters dictating the vertical mixing are identified, p , an exponent determining boundary layer mixing and λ , a scale dictating FT mixing. Sensitivity simulations with altered p , λ , and other treatments within YSU and ACM2 confirm the precipitation sensitivity. The FT mixing in the presence of clouds appears most critical to explain the sensitivity between YSU and ACM2.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Attached Jet Velocity Profiles in Mixing Tanks

Free jets have been studied in detail over much of the last century, but the theory for offset and attached jets remains incomplete. Attached jets differ from free jets in that they lose momentum to nearby surfaces, attenuating their velocities. The velocity profiles of free circular jets are nearly Gaussian, with quantitative mathematical descriptions derived from first principles by Goertler and Tollmien (Rajaratnam, 1976). In contrast, mathematical descriptions of three-dimensional attached jets from circular nozzles remain much less mature. Agelin-Chaab and Tachie (2011) used particle imaging velocimetry of a three-dimensional attached jet to show that the scaled velocity decays with scaled distance from the nozzle with a power law exponent between -1.15 and -1.21, which is larger in magnitude than that of a free jet. However, quantitative analytical expressions for the velocity profiles of attached jets similar to those of free jets remain elusive. This paper addresses this critical gap. Here we evaluate the velocity profiles of three-dimensional offset jets emerging from circular nozzles that that become attached jets. These jets lose momentum due to interactions with nearby surfaces and are important to evaluating flows in mixing vessels and to suspending solids and trapped gases in radioactive waste tanks. Despite the importance of attached jets, prior insight has been purely experimental, limited to overly simplistic analytical models, or restricted to computationally expensive computational fluid dynamics case studies. We compare the expression of Verhoff (1963) to experimental results to find reasonable quantitative agreement. As stated by Agelin-Chaab and Tachie (2011), “detailed velocity measurements of 3D offset jets are rare.” Such remains the case. This study adds to the literature by providing information at two additional Reynolds numbers (1.43 106 and 1.87 106) and evaluating simple but accurate expressions for velocity profiles. These Reynolds numbers are an order of magnitude higher than prior reports. The semi-empirical stream wise velocity profile perpendicular to the surface proposed by Verhoff (1963) is in approximate agreement with these velocity profiles, which is surprising because these attached jets are three-dimensional instead of two-dimensional as evaluated by Verhoff. However, additional work is necessary to fully describe these profiles quantitatively.

jet, attached jet, offset jet↗
DOE OSTI2023

Loop current fluctuations and quantum critical transport

We study electrical transport at quantum critical points (QCPs) associated with loop current ordering in a metal, focusing specifically on models of the “Hertz-Millis” type. At the infrared (IR) fixed point and in the absence of disorder, the simplest such models have infinite DC conductivity and zero incoherent conductivity at nonzero frequencies. However, we find that a particular deformation, involving N N species of bosons and fermions with random couplings in flavor space, admits a finite incoherent, frequency-dependent conductivity at the IR fixed point, \sigma(\omega>0)\sim\omega^{-2/z} σ ( ω > 0 ) ∼ ω − 2 / z , where z z is the boson dynamical exponent. Leveraging the non-perturbative structure of quantum anomalies, we develop a powerful calculational method for transport. The resulting "anomaly-assisted large N N expansion" allows us to extract the conductivity systematically. Although our results imply that such random-flavor models are problematic as a description of the physical N = 1 N = 1 system, they serve to illustrate some general conditions for quantum critical transport as well as the anomaly-assisted calculational methods. In addition, we revisit an old result that irrelevant operators generate a frequency-dependent conductivity, \sigma(\omega>0) \sim \omega^{-2(z-2)/z} σ ( ω > 0 ) ∼ ω − 2 ( z − 2 ) / z , in problems of this kind. We show explicitly, within the scope of the original calculation, that this result does not hold for any order parameter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Reversible to irreversible transitions for cyclically driven particles on periodic obstacle arrays

Here, we examine the collective dynamics of disks moving through a square array of obstacles under cyclic square wave driving. Below a critical density, we find that the system organizes into a reversible state in which the disks return to the same positions at the end of every drive cycle. Above this density, the dynamics are irreversible and the disks do not return to the same positions after each cycle. The critical density depends strongly on the angle θ between the driving direction and a symmetry axis of the obstacle array, with the highest critical densities appearing at commensurate angles such as θ = 0° and θ = 45° and the lowest critical densities falling at θ = arctan (0.618), the inverse of the golden ratio, where the flow is the most degenerate. As the density increases, the number of cycles required to reach a reversible state grows as a power law with an exponent near ν = 1.36, similar to what is found in periodically driven colloidal and superconducting vortex systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1995

Comparison of Life Theories for Rolling-Element Bearings

Nearly five decades have passed since G. Lundberg and A. Palmgren published their life theory in 1947 and 1952 and it was adopted as an ANSI/ABMA and ISO standard in 1950 and 1953. Subsequently, many variations and deviations from their life theory have been proposed, the most recent being that of E. Ioannides and T.A. Harris in 1985. This paper presents a critical analysis comparing the results of different life theories and discussing their implications in the design and analysis of rolling-element bearings. Variations in the stress-life relation and in the critical stress related to bearing life are discussed using stress fields obtained from three-dimensional, finite-element analysis of a ball in a nonconforming race under varying load. The results showed that for a ninth power stress-life exponent the Lundberg-Palmgren theory best predicts life as exhibited by most air-melted bearing steels. For a 12th power relation reflected by modern bearing steels, a Zaretsky-modified Weibull equation is superior. The assumption of a fatigue-limiting stress distorts the stress-life exponent and overpredicts life.

Zaretsky, Erwin V.↗
NASA NTRS1990

Flux flow and flux dynamics in high-T(sub c) superconductors

Because high temperature superconductors, including BYCO and BSCCO, are type 2 superconductors with relatively low H(sub c 1) values and high H(sub c 2) values, they will be in a critical state for many of their applications. In the critical state, with the applied field between H(sub c 1) and H(sub c 2), flux lines have penetrated the material and can form a flux lattice and can be pinned by structural defects, chemical inhomogeneities, and impurities. A detailed knowledge of how flux penetrates the material and its behavior under the influence of applied fields and current flow, and the effect of material processing on these properties, is required in order to apply, and to improve the properties of, these superconductors. When the applied field is changed rapidly, the time dependence of flux change can be divided into three regions, an initial region which occurs very rapidly, a second region in which the magnetization has a 1n(t) behavior, and a saturation region at very long times. A critical field is defined for depinning, H(sub c,p) as that field at which the hysteresis loop changes from irreversible to reversible. As a function of temperature it is found that H(sub c,p) is well described by a power law with an exponent between 1.5 and 2.5. The behavior of H(sub c,p) for various materials and its relationship to flux flow and flux dynamics are discussed.

Bennett, L. H.↗
NASA NTRS1991

Flux flow and flux dynamics in high-Tc superconductors

Because high temperature superconductors, including BYCO and BSSCO, are type 2 superconductors with relatively low H(sub c 1) values and high H(sub c 2) values, they will be in a critical state for many of their applications. In the critical state, with the applied field between H(sub c 1) and H(sub c 2), flux lines have penetrated the material and can form a flux lattice and can be pinned by structural defects, chemical inhomogeneities, and impurities. A detailed knowledge of how flux penetrates the material and its behavior under the influence of applied fields and current flow, and the effect of material processing on these properties, is required in order to apply, and to improve the properties of these superconductors. When the applied field is changed rapidly, the time dependence of flux change can be divided into three regions, an initial region which occurs very rapidly, a second region in which the magnetization has a 1n(t) behavior, and a saturation region at very long times. A critical field is defined for depinning, H(sub c,p) as that field at which the hysteresis loop changes from irreversible to reversible. As a function of temperature, it is found that H(sub c,p) is well described by a power law with an exponent between 1.5 and 2.5. The behavior of H(sub c,p) for various materials and its relationship to flux flow and flux dynamics are discussed.

Bennett, L. H.↗