Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “continuum modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A mathematical model of asynchronous data flow in parallel computers *

Abstract We present a simplified model of data flow on processors in a high-performance computing framework involving computations necessitating inter-processor communications. From this ordinary differential model, we take its asymptotic limit, resulting in a model which treats the computer as a continuum of processors and data flow as an Eulerian fluid governed by a conservation law. We derive a Hamilton–Jacobi equation associated with this conservation law for which the existence and uniqueness of solutions can be proven. We then present the results of numerical experiments for both discrete and continuum models; these show a qualitative agreement between the two and the effect of variations in the computing environment’s processing capabilities on the progress of the modelled computation.

Barnard, Richard C.↗
DOE OSTI2022

Early stage growth of amorphous thin film: Average kinetics, nanoscale dynamics, and pressure dependence

We used the coherent grazing incidence small angle x-ray scattering technique to study the average kinetics and nanoscale dynamics during early-stage a-WSi 2 sputter deposition. The kinetic and dynamic properties are examined as a function of pressure, which is known to be a critical factor in determining final surface roughness. Surface growth kinetics and dynamics are characterized by time parameters extracted from the height-height structure factor and correlation functions. The roughness at a given length scale reaches a maximum before relaxing down to a steady state. The lateral length scale dependence and pressure dependence are then compared among the measured kinetics and dynamics time parameters. Surfaces grown at lower pressures are smoother, leading to longer correlation times. The time parameters to reach a dynamic steady state and a kinetic steady state show contrasting pressure dependence. A dynamic steady state is reached earlier than the kinetic steady state at high pressure. A more random deposition direction and lower kinetic energy at higher pressures can explain these phenomena, along with the hypothesis that larger nanoclusters form in vapor before arriving at the surface. Here, a continuum model is applied to simulate the overall behavior with mixed success.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Impact of artificial topological changes on flow and transport through fractured media due to mesh resolution

Abstract We performed a set of numerical simulations to characterize the interplay of fracture network topology, upscaling, and mesh refinement on flow and transport properties in fractured porous media. We generated a set of generic three-dimensional discrete fracture networks at various densities, where the radii of the fractures were sampled from a truncated power-law distribution, and whose parameters were loosely based on field site characterizations. We also considered five network densities, which were defined using a dimensionless version of density based on percolation theory. Once the networks were generated, we upscaled them into a single continuum model using the upscaled discrete fracture matrix model presented by Sweeney et al. (2019). We considered steady, isothermal pressure-driven flow through each domain and then simulated conservative, decaying, and adsorbing tracers using a pulse injection into the domain. For each simulation, we calculated the effective permeability and solute breakthrough curves as quantities of interest to compare between network realizations. We found that selecting a mesh resolution such that the global topology of the upscaled mesh matches the fracture network is essential. If the upscaled mesh has a connected pathway of fracture (higher permeability) cells but the fracture network does not, then the estimates for effective permeability and solute breakthrough will be incorrect. False connections cannot be eliminated entirely, but they can be managed by choosing appropriate mesh resolution and refinement for a given network. Adopting octree meshing to obtain sufficient levels of refinement leads to fewer computational cells (up to a 90% reduction in overall cell count) when compared to using a uniform resolution grid and can result in a more accurate continuum representation of the true fracture network.

58 GEOSCIENCES↗
DOE OSTI2026

Seamlessly joining length scales: From atomistic thermal graphs to anisotropic continuum conductivity

Thermal transport in complex solids is governed by local structure, defects, and anisotropy, yet most continuum models still rely on oversimplified and homogenized conductivities. Here, we bridge atomistic and continuum descriptions by building finite element (FE) models directly from the site-projected thermal conductivity (SPTC), an atomic-level decomposition of the Green–Kubo thermal conductivity. We introduce a toolkit, the “Simulator Collection for Atomic-to-Continuum Scales (SCACS)”, which uses a graph neural network to predict SPTC on large atomic structures, coarse-grains these fields into anisotropic conductivity tensors, and embeds them into the heat-flow FE equation with a customized, anisotropy-aware adaptive mesh refinement scheme. Applied to silicon nanostructures, the resulting FE models act as representative volume elements, reproduce bulk conductivities, and capture interfacial and defect-driven anisotropy while maintaining thermodynamic consistency. Additionally, SCACS predicts experimental conductance trends and fields. This work demonstrates a general route for transferring atomistic transport information into device-scale thermal simulations with physics-based approximations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

A comprehensive study on three typical photoacid generators using photoelectron spectroscopy and ab initio calculations

Conducting a comprehensive molecular-level evaluation of a photoacid generator (PAG) and its subsequent impact on lithography performance can facilitate the rational design of a promising 193 nm photoresist tailored to specific requirements. In this study, we integrated spectroscopy and computational techniques to meticulously investigate the pivotal factors of three prototypical PAG anions, p-toluenesulfonate (pTS - ), 2-(trifluoromethyl)benzene-1-sulfonate (TFMBS - ), and triflate (TF - ), in the lithography process. Our findings reveal a significant redshift in the absorption spectra caused by specific PAG anions, attributed to their involvement in electronic transition processes, thereby enhancing the transparency of the standard PAG cation, triphenylsulfonium (TPS + ), particularly at ~193 nm. Furthermore, the electronic stability of PAG anions can be enhanced by solvent effects with varying degrees of strength. Here we observed the lowest vertical detachment energy of 6.6 eV of pTS - in PGMEA solution based on the polarizable continuum model, which prevents anion loss at 193 nm lithography. In addition, our findings indicate gas-phase proton affinity values of 316.4 kcal/mol for pTS - , 308.1 kcal/mol for TFMBS - , and 303.2 kcal/mol for TF - , which suggest the increasing acidity strength, yet even the weakest acid pTS - is still stronger than strong acid HBr. The photolysis of TPS + -based PAG, TPS + ·pTS - , generated an excited state leading to homolysis bond cleavage with the lowest reaction energy of 83 kcal/mol. Overall, the PAG anion pTS - displayed moderate acidity, possessed the lowest photolysis reaction energy, and demonstrated an appropriate redshift. These properties collectively render it a promising candidate for an effective acid producer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The Microscopic Mechanism of Lithiation and Delithiation in the Ag/C Buffer Layer for Anode‐Free Solid‐State Batteries

Abstract Lithium metal solid‐state batteries (LMSSBs) have demonstrated their high energy density and cycling performance at high current densities in an anode‐free architecture, featuring a thin Ag/C composite buffer layer (BL) between the current collector (CC) and the solid electrolyte (SE). This study explains the microscopic mechanism of the Ag/C BL by using first‐principles atomistic and continuum modeling. It is shown that Ag effectively acts as a homogeneous solid‐solution beyond AgLi 2.32 and maintains a positive potential even at AgLi 25 during lithiation. Key factors underlying the working of the Ag/C BL include lower interfacial resistance at the BL/CC interface than at the BL/SE interface, leading to predominant Li deposition on BL/CC, and substantial Ag–Li volume expansion during lithiation. This, combined with stronger BL/SE adhesion, causes BL/SE separation and Ag–Li extrusion toward the CC side. During delithiation, Ag re‐precipitates as nanoparticles uniformly on the CC, with its positive lithiation potential homogenizing Li currents in subsequent cycles. Other metals are less effective due to their relatively large overpotential, premature lithiation termination, and limited volume expansions hindering movement toward the CC. The study aids the BL design, focusing on metal choice and optimization material and microstructural properties, such as the Li‐ion conductivity and interfacial resistance.

25 ENERGY STORAGE↗
DOE OSTI2025

An adaptive, data-driven multiscale approach for dense granular flows

The accuracy of coarse-grained continuum models of dense granular flows is limited by the lack of high-fidelity closure models for granular rheology. One approach to addressing this issue, referred to as the hierarchical multiscale method, is to use a high-fidelity fine-grained model to compute the closure terms needed by the coarse-grained model. The difficulty with this approach is that the overall model can become computationally intractable due to the high computational cost of the high-fidelity model. In this work, we describe a multiscale modeling approach for dense granular flows that utilizes neural networks trained using high-fidelity discrete element method (DEM) simulations to approximate the constitutive granular rheology for a continuum incompressible flow model. Our approach leverages an ensemble of neural networks to estimate predictive uncertainty that allows us to determine whether the rheology at a given point is accurately represented by the neural network model. Additional DEM simulations are only performed when needed, minimizing the number of additional DEM simulations required when updating the rheology. This adaptive coupling significantly reduces the overall computational cost of the approach while controlling the error. In addition, the neural networks are customized to learn regularized rheological behavior to ensure well-posedness of the continuum solution. We first validate the approach using two-dimensional steady-state and decelerating inclined flows. We then demonstrate the efficiency of our approach by modeling three-dimensional sub-aerial granular column collapse for varying initial column aspect ratios, where our multiscale method compares well with the computationally expensive computational fluid dynamics (CFD)-DEM simulation.

Dense granular flows↗
DOE OSTI2025

Unraveling membrane electrode assembly design for electrochemical conversion of carbon dioxide to formate/formic acid

This work presents a one-dimensional continuum modeling approach to investigate various cell architectures used for electrochemical conversion of CO 2 to formate/formic acid. Ion transport is simulated by a system of generalized modified Poisson–Nernst–Planck (GMPNP) equations that reflect the reactive transport phenomena including steric effects as the electrolyte solutions become concentrated. In the cathode catalyst layer, ionic current contributions from both the supporting electrolyte and solid-state ionomer are considered. Voltage and CO 2 utilization breakdowns are utilized to deconvolute the impacts of the cell architecture. The origins of (bi)carbonate formation in the cathode are explored, as the subsequent decrease in CO 2 availability is a key reason for low faradaic efficiencies to formate/formic acid. In addition, the role of a supporting electrolyte (KOH) is investigated to understand its tradeoffs: while the K + ions can improve both conductivity and electrochemically active surface area in the cathode, the presence of OH − ions raises the pH and leads to deleterious formation of (bi)carbonates. To this end, we also present parametric studies on the concentration and flow rate of supplied KOH to the cell, to establish a path towards eliminating the need for a supporting electrolyte.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1996

Robust Stabilizing Compensators for Flexible Structures with Collocated Controls

For flexible structures with collocated rate and attitude sensors/actuators, we characterize compensator transfer functions which guarantee modal stability even when stiffness/inertia parameters are uncertain. While the compensators are finite-dimensional, the structure models are allowed to be infinite-dimensional (continuum models), with attendant complexity of the notion of stability; thus exponential stability is not possible and the best we can obtain is strong stability. Robustness is interpreted essentially as maintaining stability in the worst case. The conditions require that the compensator transfer functions be positive real and use is made of the Kalman-Yakubovic lemma to characterize them further. The concept of positive realness is shown to be equivalent to dissipativity in infinite dimensions. In particular we show that for a subclass of compensators it is possible to make the system strongly stable as well as dissipative in an appropriate energy norm.

Balakrishman, A. V.↗
NASA NTRS1984

Shear deformation plate continua of large double-layered space structures

The energy equivalence to construct equivalent continua for the actual lattice structure is described. An energy equivalent continuum is defined as that which has the same amount of strain and kinetic energies stored in it as the original lattice structure when both are subjected to the same loading conditions. The equivalent continuum is characterized by its strain and kinetic energies from which the constitutive relations and the equations of motion can be derived. A simple method to model large rigid jointed lattices as continuous media with couple stresses is presented. The transition from the discrete system to the continuous medium is achieved by expanding the displacements and the rotations of the nodal points in a Taylor series about a suitable chosen origin. Basic kinematic assumptions are introduced to insure that the assumptions used in deriving the governing equations of the modeled continuum are satisfied. The number of terms retained in the Taylor series expansion will depend upon the properties to be evaluated. This implies that the kind of continuum needed to model from the discrete lattice, before the actual properties are derived was to predetermined.

Hefzy, M. S.↗
DOE OSTI2021

On the implementation of dislocation reactions in continuum dislocation dynamics modeling of mesoscale plasticity

The continuum dislocation dynamics framework for mesoscale plasticity is intended to capture the dislocation density evolution and the deformation of crystals when subjected to mechanical loading. It does so by solving a set of transport equations for dislocations concurrently with crystal mechanics equations, with the latter being cast in the form of an eigenstrain problem. Incorporating dislocation reactions in the dislocation transport equations is essential for making such continuum dislocation dynamics predictive. A formulation is proposed to incorporate dislocation reactions in the transport equations of the vector density-based continuum dislocation dynamics. This formulation aims to rigorously enforce dislocation line continuity using the concept of virtual dislocations that close all dislocation loops involved in cross slip, annihilation, and glissile and sessile junction reactions. The addition of virtual dislocations enables us to accurately enforce the divergence free condition upon the numerical solution of the dislocation transport equations for all slip systems individually. A set of tests were performed to illustrate the accuracy of the formulation and the solution of the transport equations within the vector density-based continuum dislocation dynamics. Comparing the results from these tests with an earlier approach in which the divergence free constraint was enforced on the total dislocation density tensor or the sum of two densities when only cross slip is considered shows that the new approach yields highly accurate results. Bulk simulations were performed for a face centered cubic crystal based on the new formulation and the results were compared with discrete dislocation dynamics predictions of the same. The microstructural features obtained from continuum dislocation dynamics were also analyzed with reference to relevant experimental observations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Coupled continuum and network model framework to study catalyst layers of polymer electrolyte fuel cells

The nanostructured thin film (NSTF) catalyst layers which have demonstrated high power densities, mass activities, and exceptional metal and support stability can have limited operational robustness due to their thin thickness and the hydrophilicity of the metal-coated nano whiskers. The dispersed nanostructured thin film (dNSTF) catalyst layers have been developed by dispersing the NSTF Pt whiskers with ionomer and carbon support to increase the thickness and hydrophobicity. Continuum and network models (NM) are coupled through boundary conditions to study the polymer electrolyte fuel cell with a dNSTF cathode catalyst layer. The coupled model combines the computational efficiency of the continuum model with the pore-scale information in the dNSTF cathode catalyst layer of the NM. It captures the special morphology of the partially ionomer/water covered cylindrical whiskers, as well as water percolation through the pore structures and their impact on the cell performance. Here we observe optimal ionomer coverage on whiskers to be 0.5, ionomer to carbon ratio to be 0.9 and higher whisker to carbon ratios to be desired.

08 HYDROGEN↗
DOE OSTI2022

Twisted bilayers of thin film magnetic topological insulators

Twisted bilayer graphene (TBG) near "magic angles" has emerged as a rich platform for strongly correlated states of two-dimensional (2D) Dirac semimetals. Here we show that twisted bilayers of thin film magnetic topological insulators (MTIs) with large in-plane magnetization can realize flat bands near 2D Dirac nodes. Using a simple model for thin films of MTIs, we derive a continuum model for two such MTIs, twisted by a small angle with respect to each other. When the magnetization is in plane, we show that interlayer tunneling terms act as effective SU (2) vector potentials, which are known to lead to flat bands in TBG. We show that by changing the in-plane magnetization, it is possible to tune the twisted bilayer MTI band dispersion to quadratic band touching or to flat bands, similar to the TBG. If realized, this system can be a highly tunable platform for strongly correlated phases of two-dimensional Dirac semimetals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Understanding the plasticity contributions during laser-shock loading and spall failure of Cu microstructures at the atomic scales

A hybrid atomic-scale and continuum modeling framework is used to study the microstructural evolution during the laser-induced shock deformation and failure (spallation) of copper microstructures. A continuum two-temperature model (TTM) is used to account for the interaction of Cu atoms with a laser in molecular dynamics (MD) simulations. The MD-TTM simulations study the effect of laser loading conditions (laser fluence) on the microstructure (defects) evolution during various stages of shock wave propagation, reflection, and interaction in single-crystal (sc) Cu systems. In addition, the role of the microstructure is investigated by comparing the defect evolution and spall response of sc-Cu and nanocrystalline (nc) Cu systems. The defect (stacking faults and twin faults) evolution behavior in the metal at various times is further characterized using virtual in situ selected area electron diffraction and x-ray diffraction during various stages of evolution of microstructure. Here, the simulations elucidate the uncertain relation between spall strength and strain-rate and the much stronger relation between the spall strength and the temperatures generated due to laser shock loading for the small Cu sample dimensions considered here.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Exotic symmetries, duality, and fractons in 2+1-dimensional quantum field theory

We discuss nonstandard continuum quantum field theories in 2+1 dimensions. They exhibit exotic global symmetries, a subtle spectrum of charged excitations, and dualities similar to dualities of systems in 1+1 dimensions. These continuum models represent the low-energy limits of certain known lattice systems. One key aspect of these continuum field theories is the important role played by discontinuous field configurations. In two companion papers, we will present 3+1-dimensional versions of these systems. In particular, we will discuss continuum quantum field theories of some models of fractons.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1983

State and model error estimation for elliptic systems: Applications to large antenna static shape determination

This paper outlines the application of various estimation approaches to the problem of static shape determination for large antenna systems. The problem consists of estimating the shape of an antenna surface from measurements of its static deflection. The estimation schemes are based on any one of the modeling options of a single PDE for early insight and understanding, coarse-resolution multiple-PDE models for parametric studies and fine-resolution piecewise-continuum models for detailed design. For any one of these three models, estimator design can be developed using an infinite-dimensional approach, where the necessary finite-element truncation and approximation is conducted after the analytical design has taken place, or it can be based on a finite-dimensional approach, where the model is truncated before the estimation problem is formulated. One of the main objectives of the paper is to develop both approaches while simultaneously investigating their differences and similarities. Simulation results of an application of the finite-dimensional approach to a large parabolic reflector are presented.

Rodriguez, G.↗
NASA NTRS1992

Highlights of the theoretical work reported at the workshop

A brief overview is given of the theoretical work done on gamma-ray bursts (GRBs) done in this workshop. Papers on energy source models, optical transients, X-ray and gamma-ray continuum models, and cyclotron line models are reviewed.

Lamb, D. Q.↗
NASA NTRS1997

Coupling of Sph and Finite Element Codes for Multi-Layer Orbital Debris Shield Design

Particle-based hydrodynamics models offer distinct advantages over Eulerian and Lagrangian hydrocodes in particular shock physics applications. Particle models are designed to avoid the mesh distortion and state variable diffusion problems which can hinder the effective use of Lagrangian and Eulerian codes respectively. However conventional particle-in-cell and smooth particle hydrodynamics methods employ particles which are actually moving interpolation points. A new particle-based modeling methodology, termed Hamiltonian particle hydrodynamics, was developed by Fahrenthold and Koo (1997) to provide an alternative, fully Lagrangian, energy-based approach to shock physics simulations. This alternative formulation avoids the tensile and boundary instabilities associated with standard smooth particle hydrodynamics formulations and the diffusive grid- to-particle mapping schemes characteristic of particle-in-cell methods. In the work described herein, the method of Fahrenthold and Koo has been extended, by coupling the aforementioned hydrodynamic particle model to a hexahedral finite element based description of the continuum dynamics. The resulting continuum model retains all of the features (including general contact-impact effects) of Hamiltonian particle hydrodynamics, while in addition accounting for tensile strength, plasticity, and damage effects important in the simulation of hypervelocity impact on orbital debris shielding. A three dimensional, vectorized, and autotasked implementation of the extended particle method described here has been coded for application to orbital debris shielding design. Source code for the pre-processor (PREP), analysis code (EXOS), post-processor (POST), and rezoner (ZONE), have been delivered separately, along with a User's Guide describing installation and application of the software.

Fahrenthold, Eric P.↗