Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “community wind”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Application of Temperature Sensitivities During Iterative Strain-Gage Balance Calibration Analysis

A new method is discussed that may be used to correct wind tunnel strain-gage balance load predictions for the influence of residual temperature effects at the location of the strain-gages. The method was designed for the iterative analysis technique that is used in the aerospace testing community to predict balance loads from strain-gage outputs during a wind tunnel test. The new method implicitly applies temperature corrections to the gage outputs during the load iteration process. Therefore, it can use uncorrected gage outputs directly as input for the load calculations. The new method is applied in several steps. First, balance calibration data is analyzed in the usual manner assuming that the balance temperature was kept constant during the calibration. Then, the temperature difference relative to the calibration temperature is introduced as a new independent variable for each strain--gage output. Therefore, sensors must exist near the strain--gages so that the required temperature differences can be measured during the wind tunnel test. In addition, the format of the regression coefficient matrix needs to be extended so that it can support the new independent variables. In the next step, the extended regression coefficient matrix of the original calibration data is modified by using the manufacturer specified temperature sensitivity of each strain--gage as the regression coefficient of the corresponding temperature difference variable. Finally, the modified regression coefficient matrix is converted to a data reduction matrix that the iterative analysis technique needs for the calculation of balance loads. Original calibration data and modified check load data of NASA's MC60D balance are used to illustrate the new method.

Ulbrich, N.↗
DOE OSTI2024

WETO Software Stack Best Practices

Wind energy researchers typically share one key characteristic: a passion for increasing wind energy in the global energy mix. The U.S. Department of Energy (DOE) supports this mission in a number of ways including allocating funding directly to various aspects of wind energy research through the Office of Energy Efficiency and Renewable Energy (EERE) via the Wind Energy Technologies Office (WETO). While the traditional output of research is academic publication, software development efforts are increasingly a major focus. Software tools in the research environment allow researchers to describe an idea and quickly increase the scope and scale as they study it further. As a product of research, these tools represent a direct pipeline from researcher to industry practitioners since they are the implementation of ideas described in academic publications. Given this vital role in wind energy research and commercial development, the broad research software portfolio supported by WETO must maintain a minimum level of quality to support the wind energy field in the growing transition to renewable energy. This report outlines a series o f best practices to be adopted by all WETO-supported software projects, as well as expectations that the communities interacting with these projects should have of the developers and tools themselves. Wind energy research software has a unique standing in the field of scientific software. The stakeholders are varied with a subset being: (1) DOE EERE leadership, (2) DOE WETO leadership and program managers, (3) National lab leadership, (4) Associated project principle investigators, (5) Research software engineers, (6) Wind energy researchers in academia (including graduate students, post docs, and national lab staff), (7) Industry researchers and practitioners, (8) Commercial software developers, and (9) The general public interested in wind energy. These software are typically the end-user of other generic software libraries, so the funding cycles are often tied to applied research rather than the development of the software itself. Since the developers are also wind energy researchers, these tools are typically designed in a way that closely resembles the application in which they're used. Additionally, the expertise and incentives for the developers have a high variability, and often neither are aligned with software engineering or computer science. Given the unique environment in which wind energy research software is produced and consumed, it is critical for model owners to understand the context of their software. A framework for developing this understanding is to answer the following questions of a given software project: What is it's purpose? What is its role in the field of wind energy? What is the profile of the expected users? For how long will it be relevant? What is the expected impact? These questions allow model owners to identify the appropriate methods for the design, development, and long term maintenance of their software. Additionally, the answer provide context for future planners to understand why particular decisions were made and discern the consequences of changing course. The information is aggregated from experience within WETO-supported software development groups as well as external organizations and efforts to define the craft of research software engineering. These best practices aim to make the collaborative development process efficient and effective while improving the model understanding across stakeholders. Additionally, the general adoption of a common framework for software quality ensures that the end users of WETO software can trust these tools and accurately understand the risks to workflow integration.

17 WIND ENERGY↗
NASA NTRS1987

History of wind shear turbulence models

The Office of Flight Operations, Flight Technical Programs Div., at the FAA Headquarters, interfaces with industry, R&D communities and air carriers during the introduction of new types of equipment into operational services. A brief highlight of the need which FAA operations sees for new wind shear and turbulence data sets from the viewpoint of equipment certification and simulation is presented.

Cusimano, Lou↗
NASA NTRS1985

The space shuttle launch vehicle aerodynamic verification challenges

The Space Shuttle aerodynamics and performance communities were challenged to verify the Space Shuttle vehicle (SSV) aerodynamics and system performance by flight measurements. Historically, launch vehicle flight test programs which faced these same challenges were unmanned instrumented flights of simple aerodynamically shaped vehicles. However, the manned SSV flight test program made these challenges more complex because of the unique aerodynamic configuration powered by the first man-rated solid rocket boosters (SRB). The analyses of flight data did not verify the aerodynamics or performance preflight predictions of the first flight of the Space Transportation System (STS-1). However, these analyses have defined the SSV aerodynamics and verified system performance. The aerodynamics community also was challenged to understand the discrepancy between the wind tunnel and flight defined aerodynamics. The preflight analysis challenges, the aerodynamic extraction challenges, and the postflight analyses challenges which led to the SSV system performance verification and which will lead to the verification of the operational ascent aerodynamics data base are presented.

Wallace, R. O.↗
NASA NTRS1986

Continuous wind measurement in the tropical Pacific using VHF radars

Very High Frequency (VHF) Radar Wind Profilers are being installed on Ponape, East Caroline Islands and Christmas Island, Republic of Kiribati to continuously monitor winds aloft. The purpose of this experiment is to study wind fluctuations on time scales between minutes and days, to determine the longitudinal character of these fluctuations, and to examine their relationship to climate variability. Six-hourly wind profiles will be provided via satellite to the scientific community for Project TOGA (Tropical Ocean Global Atmosphere).

Balsley, B. B.↗
NASA NTRS1989

Mesoscale acid deposition modeling studies

The work performed in support of the EPA/DOE MADS (Mesoscale Acid Deposition) Project included the development of meteorological data bases for the initialization of chemistry models, the testing and implementation of new planetary boundary layer parameterization schemes in the MASS model, the simulation of transport and precipitation for MADS case studies employing the MASS model, and the use of the TASS model in the simulation of cloud statistics and the complex transport of conservative tracers within simulated cumuloform clouds. The work performed in support of the NASA/FAA Wind Shear Program included the use of the TASS model in the simulation of the dynamical processes within convective cloud systems, the analyses of the sensitivity of microburst intensity and general characteristics as a function of the atmospheric environment within which they are formed, comparisons of TASS model microburst simulation results to observed data sets, and the generation of simulated wind shear data bases for use by the aviation meteorological community in the evaluation of flight hazards caused by microbursts.

Kaplan, Michael L.↗
NASA NTRS2017

Earth Global Reference Atmospheric Model (Earth-GRAM) GRAM Virtual Meeting

What is Earth-GRAM? Provide monthly mean and standard deviation for any point in atmosphere; Monthly, Geographic, and Altitude Variation. Earth-GRAM is a C++ software package; Currently distributed as Earth-GRAM 2016. Atmospheric variables included: pressure, density, temperature, horizontal and vertical winds, speed of sound, and atmospheric constituents. Used by engineering community because of ability to create dispersions inatmosphere at a rapid runtime; Often embedded in trajectory simulation software. Not a forecast model. Does not readily capture localized atmospheric effects.

White, Patrick↗
NASA NTRS2017

Earth Global Reference Atmospheric Model (GRAM) Overview and Updates: DOLWG Meeting

What is Earth-GRAM (Global Reference Atmospheric Model): Provides monthly mean and standard deviation for any point in atmosphere - Monthly, Geographic, and Altitude Variation; Earth-GRAM is a C++ software package - Currently distributed as Earth-GRAM 2016; Atmospheric variables included: pressure, density, temperature, horizontal and vertical winds, speed of sound, and atmospheric constituents; Used by engineering community because of ability to create dispersions in atmosphere at a rapid runtime - Often embedded in trajectory simulation software; Not a forecast model; Does not readily capture localized atmospheric effects.

White, Patrick↗
NASA NTRS1986

Cryogenic wind tunnels for high Reynolds number testing

A compilation of lectures presented at various Universities over a span of several years is discussed. A central theme of these lectures has been to present the research facility in terms of the service it provides to, and its potential effect on, the entire community, rather than just the research community. This theme is preserved in this paper which deals with the cryogenic transonic wind tunnels at Langley Research Center. Transonic aerodynamics is a focus both because of its crucial role in determining the success of aeronautical systems and because cryogenic wind tunnels are especially applicable to the transonics problem. The paper also provides historical perspective and technical background for cryogenic tunnels, culminating in a brief review of cryogenic wind tunnel projects around the world. An appendix is included to provide up to date information on testing techniques that have been developed for the cryogenic tunnels at Langley Research Center. In order to be as inclusive and as current as possible, the appendix is less formal than the main body of the paper. It is anticipated that this paper will be of particular value to the technical layman who is inquisitive as to the value of, and need for, cryogneic tunnels.

Lawing, P. L.↗
DOE OSTI2025

A Regional Approach to Offshore Wind Energy Manufacturing in the Central Atlantic: Supply Chain

Growth of the offshore wind industry in the United States is likely to require growth in the nation's manufacturing capacity and additional resources and investments to meet energy project demands. Such growth has the potential to provide positive economic impacts for local communities, workers, and entire states. To realize the benefits of developing a domestic offshore wind supply chain, the states of Maryland, North Carolina and Virginia are working together under the Southeast and Mid-Atlantic Regional Transformative Partnership for Offshore Wind Resources (SMART-POWER) regional collaboration to advance the industry, with Delaware as a supporting state. This report is part of the SMART-POWER Workforce and Supply Chain Analysis study, funded by the National Offshore Wind Research and Development Consortium. The study assesses challenges and opportunities for the four Central Atlantic states to understand key regional strengths and identify supply chain investments that could effectively leverage their resources and provide benefits to both the member states and the offshore wind sector as a whole.

17 WIND ENERGY↗
DOE OSTI2022

The Essential Role of Westerly Wind Bursts in ENSO Dynamics and Extreme Events Quantified in Model “Wind Stress Shaving” Experiments

Abstract Westerly wind bursts (WWBs)—brief but strong westerly wind anomalies in the equatorial Pacific—are believed to play an important role in El Niño–Southern Oscillation (ENSO) dynamics, but quantifying their effects is challenging. Here, we investigate the cumulative effects of WWBs on ENSO characteristics, including the occurrence of extreme El Niño events, via modified coupled model experiments within Community Earth System Model (CESM1) in which we progressively reduce the impacts of wind stress anomalies associated with model-generated WWBs. In these “wind stress shaving” experiments we limit momentum transfer from the atmosphere to the ocean above a preset threshold, thus “shaving off” wind bursts. To reduce the tropical Pacific mean state drift, both westerly and easterly wind bursts are removed, although the changes are dominated by WWB reduction. As we impose progressively stronger thresholds, both ENSO amplitude and the frequency of extreme El Niño decrease, and ENSO becomes less asymmetric. The warming center of El Niño shifts westward, indicating less frequent and weaker eastern Pacific (EP) El Niño events. Removing most wind burst–related wind stress anomalies reduces ENSO mean amplitude by 22%. The essential role of WWBs in the development of extreme El Niño events is highlighted by the suppressed eastward migration of the western Pacific warm pool and hence a weaker Bjerknes feedback under wind shaving. Overall, our results reaffirm the importance of WWBs in shaping the characteristics of ENSO and its extreme events and imply that WWB changes with global warming could influence future ENSO.

Meteorology & Atmospheric Sciences↗
NASA NTRS1987

Plasma-tail activity and the interplanetary medium at Halley's Comet during Armada Week: 6-14 March 1986

The encounters of five spacecraft with Halley's Comet during 6-14 March 1986 offered a unique opportunity to calibrate the solar-wind interaction with cometary plasmas as recorded by remote wide-field and narrow-field/narrowband imaging. Perhaps not generally recognized in the comet community is the additional opportunity offered by the Halley Armada to study the structure of the solar-wind and interplanetary magnetic field (IMF) in three dimensions using five sets of data obtained over similar time intervals and heliocentric distances, but at somewhat different heliolatitudes. In fact, the two problems, i.e., comet physics and the structure of the interplanetary medium, are coupled if one wants to understand what conditions pertained at the comet between the encounters. This relationship is discussed.

Niedner, Malcolm B., Jr.↗
DOE OSTI2023

Wind as a Distributed Energy Resource

Distributed wind can be installed in a wide range of locations and wind conditions, supporting millions of systems and thousands of gigawatts of power production capacity. As a result, utilities, communities, and nations are looking to distributed generation as an effective way to meet future energy needs. This fact sheet provides an overview of distributed wind, including where distributed wind projects can be located, and how U.S. and international research supports distributed wind applications. This fact sheet was produced as a resource for the International Energy Agency Task 41 members to use as an educational resource.

behind-the-meter wind energy↗
NASA NTRS1993

Investigation of water vapor motion winds from geostationary satellites

Motions deduced in animated water vapor imagery from geostationary satellites can be used to infer wind fields in cloudless regimes. For the past several years, CIMSS has been exploring this potentially important source of global-scale wind information. Recently, METEOSAT-3 data has become routinely available to both the U.S. operational and research community. Compared with the current GOES satellite, the METEOSAT has a superior resolution (5 km vs. 16 km) in its water vapor channel. Preliminary work: at CIMSS has demonstrated that wind sets derived from METEOSAT water vapor imagery can provide important upper-tropospheric wind information in data void areas, and can positively impact numerical model guidance in meteorological applications. Specifically, hurricane track forecasts can be improved. Currently, we are exploring methods to further improve the derivation and quality of the water vapor wind sets.

Velden, Christopher↗
DOE OSTI2023

City and Borough of Sitka, Alaska: Modeling and Controls Assistance and Renewable Energy Resource Assessment [Slides]

This project develops the dynamic modeling of hydro plants and wind generation in Sitka, Alaska. A dynamic penetration of renewables was evaluated under various conditions. The impact of altering hydro generation control to synchronous condenser control was evaluated. While the existing hydro generations are sufficient to address voltage instability, a detailed study of the active-reactive capability limits of hydro generation operation should be conducted to uptake at various wind penetration levels.

14 SOLAR ENERGY↗
NASA NTRS1973

Research on future short-haul aircraft at the NASA Langley Research Center.

Some of the current research for improving our short-haul air-transportation system is reviewed. Promising aircraft range from helicopters, turbofan-powered STOL, through mechanical flap reduced take-off and landing (RTOL) concepts. Advanced rotorcraft technology can provide improved passenger, community, operational, and economic acceptability of civil transport helicopters. From wind-tunnel and design studies, techniques are available for achieving low-noise fixed-wing STOL and RTOL through proper engine and airframe design. Agreeable ride qualities, crosswind landing capability, and all-weather terminal operation are also goals of present effort.

Riebe, J. M.↗
NASA NTRS1975

Microwave scattering from the ocean surface

This paper is a review of current aircraft and satellite microwave remote sensing programs concerned with the measurement of ocean wave and surface wind conditions. These particular measurements have been identified by the user community as offering significant economic and technological benefits. Active microwave remote sensing techniques for these applications have been described theoretically and verified experimentally. The results of recent aircraft and satellite experimental programs are presented herein along with plans for the SeaSat-A Satellite Scatterometer.

Jones, W. L.↗
NASA NTRSDate not supplied

Status of Venus Global Reference Atmospheric Model (Venus-GRAM) Upgrades

Venus-GRAM Overview - Engineering-oriented atmospheric model that estimates mean values and statistical variations of Venus atmospheric properties - Outputs include atmospheric density, temperature, pressure, chemical composition, and wind components along a user-defined path - Widely used by the engineering community because of its ability to create realistic atmospheric dispersions - Can be integrated into high fidelity flight dynamic simulations of launch, entry, descent and landing (EDL), aerobraking and aerocapture - Has been used in multiple studies and proposals including NASA Engineering and Safety Center (NESC) Autonomous Aerobraking Study and various Discovery proposals - Optional trajectory input file consisting of time, height, latitude, and longitude can be used to provide the Venus-GRAM trajectory path - Optional auxiliary profile consisting of height, latitude, longitude, temperature, pressure, density, eastward wind, and northward wind may be used to replace model data in Venus-GRAM - Not a forecast model - GRAMs are also available for Earth, Mars, Titan, Neptune, Uranus, and Jupiter - Available through the NASA Software Catalog https://software.nasa.gov/software/MFS-33888-1

atmospheric models↗