SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Technique employs x-ray scanning system to measure thickness of topcoat and subcoat of heat shields and other ceramic materials. System scans sample in raster pattern and depicts image of structure on cathode-ray-tube for viewing or photocopying within seconds.
With the skyrocketing market demands for energy storage, lithium ions batteries (LIB) with higher energy density are urgently needed. Cathodes play a critical role in determining the energy density of LIB, and the most popular one is Ni-rich cathode due to its high capacity. However, due to the fast structural degradation, Ni-rich cathode materials should be further modified to achieve higher stability. Herein, we introduce bismuth ions in LiNi 0.83 Co 0.11 Mn 0.06 O 2 cathodes by adding Bi 2 O 3 during sintering to optimize the specific capacity and cycle stability. By adding 0.1% mol Bi, the Li + diffusion and structural stability are effectively optimized, leading to improved electrochemical performances. Further, the modified sample delivers much higher specific capacity (222.9 mAhg -1 , 0.05 C) than unmodified sample (204 mAhg -1 , 0.05 C). Meanwhile, the specific capacity of optimized sample after 100 cycles at 0.33 C is 27.75 mAhg -1 higher than that of unmodified sample. Therefore, this work demonstrates that Bi modification can be regarded as a possible solution to optimizing the electrochemical performance of Ni-rich cathodes.
Nanometer-thick reconstruction layers on layered cathode surfaces have been widely observed on both pristine and cycled materials. However, the mechanisms of reconstruction and the role that these structures play in electrochemical performance are not fully understood. From a crystallographic perspective, such surface reconstruction layers result from cation site-mixing between Li and transition-metal ions, but it remains far from clear as to what the critical factors are that control such cation mixing for various cathode chemistries. In this paper, we report observations on surface transformations during cycling of a Ni-rich cathode-oxide that are governed by direct contact with the liquid electrolyte. Specifically, within a secondary particle, the three-dimensional hierarchical aggregate of primary particles leads to the formation of grain boundaries of different characteristics, including open grain boundaries that allow the permeation of liquid electrolyte, and closed grain boundaries that exclude liquid electrolyte penetration. Upon battery cycling, surfaces in direct contact with the liquid electrolyte showed a surface reconstruction layer while the surfaces that did not have contact with the electrolyte showed no such reconstructions. In addition, the critical role of oxygen in reconstruction of grain boundaries is demonstrated, and the unexpected oxygen depletion at twin boundaries result in severe phase transitions. The present work provides further insights into phase transitions at solid-solid and solid-liquid interfaces within secondary cathode particles and suggests strategies for mitigating surface/interfacial degradation.
In this study, we report the stability of the layered high voltage cathode NMC622 with respect to a standard liquid electrolyte and in an all solid-state configuration. NMC622 cathodes with a (104) orientation were found to suffer from degradation at high voltage (4.5 V vs Li/Li + ) due to electrolyte-promoted degradation of the layered structure in a carbonate electrolyte. The lithium phosphorus oxynitride (LiPON) electrolyte was able to suppress the extent of this decomposition in solid-state cells but not totally prevent it from occurring. In the solid-state cells the capacity decreased from 203 to 93 mAh/g in the first cycle and from 93 to 79 mAh/g over the subsequent 99 cycles, whereas, after 20 cycles, the liquid cell charge capacity was dominated by the irreversible electrolyte degradation. Furthermore, the interfacial resistances of the solid-state cells were stable with cycling, suggesting minimal degradation of the NMC622/LiPON interface and incumbent losses due to structural evolution associated with cathode orientation. This data indicates that accessing stable high voltage capacity in NMCs will not be enabled by simply stabilizing the cathode–electrolyte interface. Optimizing cathode crystallographic orientation may be the key to accessing this high voltage regime.
Ni-rich layered cathode materials are progressively considered as the standard configuration of high-energy electric vehicles by virtues of their high capacity and eliminated “range anxiety.” However, the poor cyclic stability and severe cobalt supply crisis would restrain their wide commercial applicability. Here, a cost-effective single-crystal Co-free Ni-rich cathode material LiNi 0.8 Mn 0.18 Fe 0.02 O 2 (NMF), which outperforms widely commercial polycrystalline LiNi 0.83 Co 0.11 Mn 0.06 O 2 (MNCM) and single-crystal LiNi 0.83 Co 0.11 Mn 0.06 O 2 (SNCM) is reported. Surprisingly, NMF can compensate for the reversible capacity loss under the designed conditions of high-temperature and elevated-voltage, achieving a competitive energy density compared with conventional MNCM or SNCM. Further, combining operando characterizations and density functional theory calculation, it is revealed that NMF cathode with improved dynamic structure evolution largely alleviates the mechanical strain issue commonly found in Ni-rich cathode, which can reduce the formation of intragranular cracks and improve the safety performance. Consequently, this new Co-free NMF cathode can achieve a perfect equilibrium between material cost and electrochemical performance, which not only reduces the production cost by >15%, but also demonstrates excellent thermal stability and cycling performance.
Crystalline solid solutions of 1:1 Li3PO4/SiO4 were synthesized and tested electrochemically using thin film, physical vapor deposited electrodes. After cathode deposition, the electrolyte/cathode structures were annealed at 700 degrees Celsius for 2 hours, a process that resulted in cathode crystallization without encouraging deleterious interfacial reactions. Results indicate that the electrolyte functioned well in this configuration.
This study investigates the structural evolution of LiMn0.5Ni0.5O2 cathode materials for Li-ion batteries as a function of synthesis temperature and its effect on electrochemical performance. It is demonstrated that, as the synthesis temperature increases from 400 to 900 ?C, a gradual topotactic transformation occurs between a lithiated spinel structure, denoted herein as “lithium-excess spinel” LxS-LiMn0.5Ni0.5O2 (or LxS-LMNO), and the well-known layered LiMn0.5Ni0.5O2 structure prepared at high temperature, HT-LiMn0.5Ni0.5O2 (HT-LMNO). The electrochemical capacity of the LiMn0.5Ni0.5O2 electrodes follows a parabolic trend with increasing synthesis temperature, which is attributed primarily to the gradual transformation of 3-dimensional (3-D) to 2-dimensional (2-D) diffusion pathways for the Li ions. When synthesized at 400 °C, LxS-LiMn0.5Ni0.5O2 electrodes perform well, benefitting from the 3-D network of channels within the LxS structure. By contrast, when prepared at 500-700 °C, LiMn0.5Ni0.5O2 electrodes operate poorly, which is attributed to the formation of locally disordered structural arrangements that impede Li-ion diffusion. Such an increase in local disorder in the mid-temperature synthesis range is attributed to the structural frustration between the lithium-excess spinal and layered end-members. The transformation from the locally disordered to more ordered layered components between 700 °C and 900 °C enhances electrochemical performance. The study opens new avenues for designing next-generation Mn-rich cathode materials by fine-tuning the synthesis conditions as well as the composition and structure of LxS-LMNO electrodes.
Chromium deposited by high-power impulse magnetron sputtering (HIPIMS) versus cathodic arc (CA) processes exhibits very different mechanical properties. Combining the two can result in a single-phase with superior performance that can be tailored for use in coating SiC for advanced nuclear fuel cladding. Coating morphology, residual stress, elemental depth profiles, and mechanical testing by scratch, pull-off adhesion, and microcantilevers are shown for HiPIMS, CA, and combined coatings. CA coatings were likely to spall and had lower adhesion strength due to tensile residual stresses but had desirable material properties. Additionally, by depositing an initial layer of Cr by HiPIMS followed by a layer of Cr by CA, a more adherent coating was achieved and some of the stress issues with CA morphology were resolved. Combined coatings withstood at least 80 MPa in pull-off adhesion tests and had maximum failure stress values of 5GPa in microcantilever tests. These results were better than either individual deposition method and point to a hybrid approach being a path forward for a more robust coating.
Singe-crystal (SC) nickel-rich layered oxide cathodes, composed of boundary-free particles with high tap density, offer significant advantages in volumetric energy density and mechanical strength compared with polycrystalline (PC) cathode materials. However, as the nickel content increases (≥80%), SC Ni-rich cathodes often suffer from faster performance degradation than PC cathodes of the same composition, and the underlying causes of this discrepancy remain poorly understood. Herein, we reveal the distinct Ni redox behaviors that govern the electrochemical performance of SC and PC Ni-rich cathodes using multiscale and operando characterization techniques. Our results indicate that the increasingly heterogeneous Ni oxidation process in SC cathodes leads to the additional irreversible oxygen redox activity that deteriorates both the mechanical and chemical structures. In contrast, PC cathodes, despite with more pronounced surface reconstruction, exhibit greater chemomechanical stability due to homogeneous redox reactions during charging. Consequently, we find that bulk degradation, more than surface reactions, ultimately leads to fast capacity decay of SC Ni-rich cathodes during cycling. In conclusion, this work offers a comprehensive view on the impact of Ni redox evolutions on the chemomechanical stability in Ni-rich layered oxide cathodes, providing new insights into the longstanding performance gap between SC and PC cathodes, and guiding the rational design of Ni-rich cathode architectures.
Self-discharge and chemically induced mechanical effects degrade calendar and cycle life in intercalation-based electrochromic and electrochemical energy storage devices. In rechargeable lithium-ion batteries, self-discharge in cathodes causes voltage and capacity loss over time. The prevailing self-discharge model centers on the diffusion of lithium ions from the electrolyte into the cathode. Here, we demonstrate an alternative pathway, where hydrogenation of layered transition metal oxide cathodes induces self-discharge through hydrogen transfer from carbonate solvents to delithiated oxides. In self-discharged cathodes, we further observe opposing proton and lithium ion concentration gradients, which contribute to chemical and structural heterogeneities within delithiated cathodes, accelerating degradation. Hydrogenation occurring in delithiated cathodes may affect the chemo-mechanical coupling of layered cathodes as well as the calendar life of lithium-ion batteries.
Despite the challenges in achieving its full theoretical capacity of reversible extraction of two Li ions, the Li 2 FeSiO 4 (LFS) cathode shows a remarkable cycling stability once its low electronic conductivity is addressed. By studying the local structure around the iron during electrochemical cycling using in situ x-ray absorption spectroscopy (XAS), it is possible to gain insight into the factors which determine the electrochemical properties of this material. In order to practically perform in situ XAS studies, the charge/discharge of LFS was maximized using two approaches: (a) reducing the particle size of LFS samples from micro-scale to nano-scale in order to reduce the diffusion path for intercalating ions; and (b) applying a conductive coating to each nanoparticle to facilitate electron transfer. A family of LFS materials was synthesized and characterized using x-ray diffraction, and scanning electron microscopy with energy dispersive analysis for structural and morphological analysis, as well as cyclic voltammetry and cycling tests for electrochemical performance diagnosis. This material was then characterized by in situ XAS. The results provide insight into the stable electrochemical performance of LFS and suggest new synthetic routes to reaching the theoretical capacity.
Large interfacial resistance resulting from interfacial reactions is widely acknowledged as one of the main challenges in sulfide electrolytes (SEs)-based all-solid-state lithium batteries (ASSLBs). However, the root cause of the large interfacial resistance between the SEs and typical layered oxide cathodes is not fully understood yet. Here we deciphered that interfacial oxygen loss from single-crystal LiNi 0.5 Mn 0.3 Co 0.2 O 2 (SC-NMC532) chemically oxidizes Li 10 GeP 2 S 12 , generating oxygen-containing interfacial species. Meanwhile, the interfacial oxygen loss also induces a structural change of oxide cathodes (layered-to-rocksalt). Besides, the high operation voltage can electrochemically oxidize SEs to form non-oxygen species (e.g. polysulfides). These chemically and electrochemically oxidized species, together with the interfacial structural change, are responsible for the large interfacial resistance at the cathode interface. More importantly, the widely adopted interfacial coating strategy is effective in suppressing chemically oxidized oxygen-containing species and mitigating the coincident interfacial structural change but is unable to prevent electrochemically induced non-oxygen species. These findings provide a deeper insight into the large interfacial resistance between the typical SE and layered oxide cathodes, which may be of assistance for the rational interface design of SE-based ASSLBs in future.
Due to flexible structure tunability and abundant structure diversity, redox-active polymers are promising cathode materials for developing affordable and sustainable Na-ion batteries (NIBs). However, polymer cathodes still suffer from low capacity, poor cycle life, and sluggish reaction kinetics. Herein, we designed and synthesized a polymer cathode material bearing carbonyl and azo groups as well as extended conjugation structures in the repeating units. The polymer cathode exhibited exceptional electrochemical performance in NIBs in terms of high capacity, long lifetime, and fast kinetics. When coupled with a low-concentration electrolyte, it shows superior performance at low temperatures down to -50 °C, demonstrating great promise for low-temperature battery applications. Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM) were employed to study the reaction mechanism, interphase structure, and morphological evolution, confirming reversible redox reactions between azo/carbonyl groups in the polymer and Na + /electrons, a NaF-rich interphase, and high structure stability upon cycling. In conclusion, this work provides an effective approach to developing high-performance polymer cathodes for affordable, sustainable, and low-temperature NIBs.
Garnet-structured Li 6.75 La 3 Zr 1.75 Ta 0.25 O 12 (LLZTO) is one of the most promising electrolyte materials for solid-state Li batteries (SS-LiB). The design and fabrication of a good cathode/electrolyte interface is an important criterion for the SS-LiB. In this work, we performed a systematic study on the impact of cathode crystal structure and chemical compositions on their chemical stabilities against the LLZTO at elevated temperatures, which are required for their adhesion during cell fabrication processes. X-ray Diffraction (XRD) and Rietveld refinement analyses revealed the chemical stabilities of various cathode materials in contact with the LLZTO. While layered LiCoO 2 cathode showed good stability in contact with LLZTO to 900 °C, LiNiO 2 or Ni-rich LiNi x Mn y Co 1–x–y O 2 (NMC) cathodes suffered from the formation of La 4 NiLiO 8 due to La-diffusion from LLZTO. Furthermore, Mn-rich LiMn 2 O 4 spinel and layered LiNi 1/3 Mn 1/3 Co 1/3 O 2 cathodes suffered from the formation of La 2 Zr 2 O 7 due to Li-diffusion and production of Li 2 MnO 3 . As a result, LiNi 0.6 Mn 0.2 Co 0.2 O 2 , having an ideal balance of Ni/Mn/Co composition, or Li 2 MnO 3 containing cathodes such as Li 1.2 Ni 0.15 Mn 0.55 Co 0.1 O 2 were found to have excellent phase stability as the cathodes for LLZTO-based SS-LiBs.
Structural heterogeneity in solid-state batteries can impact material utilization and fracture mechanisms. Crystallographically oriented lithium cobalt oxide film cathodes serve as a model electrode system for exploring how void distribution contributes to stress relief and build up during cycling. Real- and reciprocal-space operando and ex situ synchrotron based experiments are utilized to understand structural changes across multiple length scales contribute to stress generation and fracture. Nanotomography uncovers a depth-dependent porosity variation in the pristine electrode and highlights preferential fracture in regions of lower porosity during delithiation. Energy-dispersive X-ray diffraction and 3D X-ray absorption near-edge spectroscopy (XANES) reveal the underutilization of cathode material in these regions. 3D XANES also confirms preferential delithiation near the sub-grain boundaries. Chemo-mechanical modeling coupled with site-specific mechanical characterization demonstrate how stress accumulation in dense regions of the electrode leads to fracture and underutilization of active material. In conclusion, our findings reveal the importance of materials design to alleviate stress in small-volume changing cathodes.
With the widespread use of lithium-ion batteries (LIBs) in portable electronics and electric vehicles (EVs), the end-of-life (EOL) LIBs are projected to reach 1336 GWh by 2040 under the sustainable development scenario. Proper recycling is urgently needed to minimize the release of hazardous waste and reduce mining activities by reintroducing critical minerals into the supply chain. Lithium nickel manganese cobalt oxide (LiNi x Mn y Co z O 2 , NMCs) cathodes have become dominant in the LIB market, especially with the increasing production of EVs, which are also the most valuable components in EOL LIBs. Unlike pyrometallurgical and/or hydrometallurgical methods, which convert spent NMCs into metals or metal compounds, direct recycling technologies aim to maximize the value of spent cathodes by restoring their degraded structure and composition. Furthermore, this review summarizes direct recycling methods for NMC cathodes published in the last decade and provides insights into the challenges and future development of direct recycling techniques.
Layered Na x MO 2 sodium oxide positive electrode materials have experienced renewed interest owing to the current commercial attention on sodium-ion batteries. Although there are many attractive qualities of these materials, they suffer from serious shortcomings owing to Na + ordering and transition-metal layer gliding that cause a plethora of voltage plateaus during cycling. The P2-layered Na 2+x Ni 2–x/2 TeO 6 (0 ≤ x ≤ 0.5) system provides a framework for investigating the effect of dual Na + substitution into the sodium layer and the transition-metal layer of the structure and its effects on the electrochemical properties of the materials. A careful investigation into the synthesis and properties of these materials reveals that the sodium content used during material preparation has a drastic effect on the composition and electrochemical profile of these materials. The sodium substitution disrupts ordering within the transition-metal layer, thereby disrupting Na + ordering in the adjacent sodium layers. Beyond a critical sodium concentration, the layer stacking shifts, and all voltage plateaus of the P2-Na 2 Ni 2 TeO 6 material are no longer observed at 4.4 V versus Na + /Na. These results also question the common belief that additional sodium precursor is required when preparing layered sodium oxide cathodes, providing new guidelines for material synthesis and characterization.
With the advantages of high energy density and low manufacture cost, lithium-rich layered oxides (LLOs), typically with a layered O3-type structure, are regarded as promising cathodes for lithium-ion batteries (LIBs), but their broad usages are hindered by severe voltage decay over cycling. Although recent progress in O2-type LLOs has aroused interest for their less voltage decay, the critical barrier of unsatisfactory capacity retention has not been overcome yet. In this work, to tackle these handicaps, we design a new type of LLO (O2/O3-type LLO) with a homogeneous hybrid structure, where the O2 and O3 lattice stacking sequences are arranged alternatively. Benefitting from this novel O2/O3 hybrid structure, the designed material shows greatly improved voltage and capacity stability than that of pure O2- and O3-type LLOs. Revealed by in-situ synchrotron X-ray diffraction and operando differential electrochemical mass spectra, the O2/O3-hybrid LLO cathode shows a more reversible structural evolution, smaller volume change and suppressed oxygen loss during the electrochemical processes. Our approach has initiated a new way to reduce the capacity and voltage decay of LLOs, which endows great promise to the development of high-energy-density LIBs.