Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “bedrock”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Applications of remote sensing to geobotanical prospecting for non-renewable resources

Airborne sensors used in the remote detection of geobotanical anomalies are able to locate mineral deposits. Geobotanical stress is manifested in increased visible spectrum reflectance due to a decrease in chlorophyll content which induces chlorosis. The effectiveness of this method is, however, restricted to soils in which plant root structures are embedded in bedrock-derived soils to a depth sufficient for the production of heavy metal stress. It is noted that Landsat remote sensors are inherently better suited to the detection of overall plant density or biomass changes relating to zones of mineralization.

Birnie, R. W.↗

A study of Minnesota land and water resources using remote sensing

A pilot study of 60 lakes in Minnesota shows that LANDSAT data correlate very well with the Carlson trophic state index which is derived from measurements in the field. Nimbus satellite data reveal improvement in water quality in Lake Superior since the dumping of taconite tailings stopped in 1980. A feasibility study of using color infrared photography as a near real time tool for soil and crop management in corn and soybean areas of the state generated strong interest from farmers and agribusiness firms. The state geological survey had success in the use and applications of LANDSAT images. Subtleties of changes in vegetation, soil, and topography are such that ground water presence and depth to water table are nearly always impossible to qualify except for broad scale applications. Bedrock and structural differences as shown in lineaments offer great potential for resolution of some kinds of geologic studies. A synergistic concept is to be used to search for mineral resources in the northeastern part of the state.

Source record↗

Substance geology of the western desert in Egypt and Sudan revealed by Shuttle Imaging Radar (SIR-A)

A correlation of known archaeologic sites with the mapped locations of the streamcourses is expected and may lead to new interpretations of early human history in the Sahara. The valley networks, faults, and other subjacent bedrock features mapped on the SIR-A images are promising areas for ground water and mineral exploration. Additionally, the analogies between the interplay of wind and running water in the geologic history of the Sahara and of Mars are strengthened by the SIR-A discoveries of relict drainage systems beneath the eolian veneer of Egypt and Sudan.

Breed, C. S.↗

Application of Heat Capacity Mapping Mission data to regional geologic analysis for mineral and energy resource evaluation

Heat Capacity Mapping Mission thermal-inertia images of a diversity of terrains and geologic settings were examined in conjunction with topographic, geologic, geophysical, and LANDSAT data. The images were found to have attributes similar to bedrock maps. In the Cascades region, two new features were identified and a method was developed to characterize regional terranes using linear feature data. Two northeast-trending Lineaments were discovered in the Overthrust Belt of Montana and Idaho. The longer of the two extends from the Idaho-Oregon border, through the Idaho batholith and across the Lewis thrust. It coincides, along segments, with mapped faults and an aeromagnetic pattern change. A major lineament crossing the Colorado Plateau and the Southern Rocky Mountians was detected on several thermal-inertial images and evidence was found for the existence of a geologic discontinuity. Vegetation-covered areas in Richfield and the Silver City quadrangle (Arizona and New Mexico) displayed thermal-inertia differences within heavily vegetation areas although no apreciable correlation was found between vegetation cover and thermal inertia. Resistant ridges and knolls have high thermal inertias and thermal-inertia contrasts occurred at lithologic and fault contacts. In the heavy vegetated Pinaleno Mountains, Arizona, a Lithologic unit obscured on LANDSAT MSS data due to the vegetation cover, exhibited a thermal-inertia contrast with its surroundings.

Watson, K.↗

Multiprocess evolution of landforms in the Kharga Region, Egypt: Applications to Mars

In order to understand better the polygenetic evolution of landforms on the martian surface, field studies were conducted in and around the Kharga Depression, Egypt. The Kharga region, on the eastern edge of Egypt's Western Desert, was subject to erosion under mostly hyperarid climatic conditions, punctuated by brief pluvial episodes of lesser aridity, since early Pleistocene time. The region contains numerous landforms analogous to features on the martian surface: yardangs carved in layered surficial deposits and in bedrock, invasive dune trains, wind-modified channels and interfluves, and depressions bounded by steep scarps. Like many of the topographic depresions on Mars, the Kharga Depression was invaded by crescentic dunes. In Egypt, stratigraphic relations between dunes, yardangs, mass-wasting debris, and wind-eroded flash-flood deposits record shifts in the relative effectiveness of wind, water, and mass-wasting processes as a function of climate change.

Breed, C. S.↗

Radar backscatter modelling

The terrain analysis software package was restructured and documentation was added. A program was written to test Johnson Space Center's four band scatterometer data for spurious signals data. A catalog of terrain roughness statistics and calibrated four frequency multipolarization scatterometer data is being published to support the maintenance of Death Valley as a radar backscatter calibration test site for all future airborne and spacecraft missions. Test pits were dug through sand covered terrains in the Eastern Sahara to define the depth and character of subsurface interfaces responsible for either backscatter or specular response in SIR-A imagery. Blocky sandstone bedrock surfaces at about 1 m depth were responsible for the brightest SIR-A returns. Irregular very dense CaCO3 cemented sand interfaces were responsible for intermediate grey tones. Ancient river valleys had the weakest response. Reexamination of SEASAT l-band imagery of U.S. deserts continues.

Schaber, G. G.↗

Megaregolith thickness, heat flow, and the bulk composition of the Moon

Models developed to assess the effects of megaregolith on lunar thermal evolution are discussed. It is confirmed that the two sites where lunar heat flow was measured are probably unrepresentative, with heat flows about 25% higher than regional averages, due to focussing of heat flow towards regions with thin megaregolith. Numerous lines of evidence indicate that the megaregolith is generally 2 to 3 km thick under highlands (which cover about 83% of the total lunar surface), and 1 km thick under maria. In most models, megaregolith thickness is assumed to be roughly 6x greater over highlands than over maria. Based on sparse data for porosity among lunar rock types, and the correlation between thermal conductivity and porosity, it is assumed that megaregolith conductivity is roughly 20 kiloerg s(-1)cm(-1)K(-1), and bedrock conductivity is roughly 7x greater. It is also found that insulation by megaregolith exacerbates the problem of reconciling modest temperatures inferred for the (present) matle with a high rate of heat production; an upper limit of 30 ng/g for the bulk-Moon U content can be derived from this constraint alone.

Warren, P. H.↗

A Silicic Shield Volcano in Bolivia

Volcan Quemado and its environs provides an excellent site to study the radar signature of a silicic volcanic construct. This feature differs from basaltic terrains primarily by the evidence of explosive eruptions associated with silica-rich magmas. These explosions produced a complex of distinctive craters that are visible on radar because of their steep inner walls and exposed bedrock units. Explosive events also generated surface deposits of fine (1 mm to 10 cm) material that mantles the region around the volcano to a distance of 20 to 30 km from its center. These features are very different from those observed on basaltic flows, which typically lack violet, explosive events. In these terrains, the surface is dominated by radar-rough flows with steep, lobate flow fronts. Craters are less common, although maars are found in some regions. These comparisons suggest that spaceborne radar may be able to distinguish surface characteristics that can be used to identify volcanic eruptive styles on Venus, Mars, and other solar-system bodies.

Christensen, P. R.↗

Mapping alluvial fans in Death Valley, California, using multichannel thermal infrared images

Alluvial fans have been mapped in Death Valley, California using NASA's 8-12 micron six-channel airborne Thermal Infrared Multispectral Scanner (TIMS). Both composition and relative age differences were recognized. Age unit boundries are generally consistent with those obtained by conventional mapping. Composition was verified by field investigation and comparison with existing geologic maps. Bedrock and its young derived fan gravels have similar emissivities. The original composition of the fans is modified by differential erosion and weathering, permitting relative age mapping with TIMS.

Gillespie, A. R.↗

Petrology and geochemistry of lunar dimict breccia 61015

The results of a petrological and geochemical study of the dimict breccia 61015 at the Apollo 16 site are presented and discussed. The breccia consists predominantly of granulated anorthosite and impact melt rock of very high aluminum-basalt composition. It probably formed in the floor of an expanding crater cavity when impact melt generated within the cavity was injected into underlying anorthositic bedrock and solidified rapidly, the anorthosite and melt rock being fragmented by deformation in the later stages of the impact. A possible source crater for the breccia is identified. The breccia has been affected by at least one recent small impact, which produced internal shock-induced melting of the breccia and injected and coated the rock with externally derived melts. The TiO2 content of the coating and vein glasses establish that they cannot be melted soils; their composition requires a mafic, low-TiO2 protolith component.

James, O. B.↗

Petrologic profile of Apollo 16 regolith at Station 4

The Apollo 16 double drive tube core 64001/2 (total depth about 60 cm) consists of four petrologic units based on the modal abundance of lithic, monomineralic, and other particles in the 20-500 micron size range of samples from 12 levels. Variation in the abundance of particles derived directly from bedrocks is low and the core soils probably represent only one set of source rocks. The chemical signature of an excessively high mare basalt component at about 42 cm correlates with an excess of regolith breccias, which may then be the physical carrier. The core soils as a whole show a systematic size-composition relationship that may be attributed to a large-scale macroscopic reworking and the consequent masking of any or all previous surface process related mixing event. However, on a much smaller scale (about 0.5 cm), individual soil layers seem to have evolved more via mixing than via in situ reworking.

Basu, A.↗

Megaregolith thickness, heat flow, and the bulk composition of the moon

Models developed to assess the effects of megaregolith on lunar thermal evolution are discussed. It is confirmed that the two sites where lunar heat flow was measured are probably unrepresentative, with heat flows about 25 percent higher than regional averages, due to focussing of heat flow towards regions with thin megaregolith. Numerous lines of evidence indicate that the megaregolith is generally 2 to 3 km thick under highlands (which cover about 83 percent of the total lunar surface), and 1 km thick under maria. In most models, megaregolith thickness is assumed to be roughly 6x greater over highlands than over maria. Based on sparse data for porosity among lunar rock types, and the correlation between thermal conductivity and porosity, it is assumed that megaregolith conductivity is roughly 20 kiloerg s(-1)cm(-1)K(-1), and bedrock conductivity is roughly 7x greater. It is also found that insulation by megaregolith exacerbates the problem of reconciling modest temperatures inferred for the (present) mantle with a high rate of heat production; an upper limit of 30 ng/g for the bulk-Moon U content can be derived from this constraint alone.

Rasmussen, K. L.↗

Global map of eolian features on Mars

A variety of common eolian features on Mars have been identified from a survey of Mariner 9 and Viking orbiter images, and their regional and global distributions and orientations are discussed. Ten features have been mapped including: light and dark streaks, splotches, barchan and transverse dunes, crescentric and anomalous dunes, yardangs, wind grooves, and deflation pits. The north polar region shows a complex wind regime. Dunes and other ephemeral features reveal winds from the northwest and northeast. In the middle and low northern latitudes, northeasterly winds are the most effective winds. Southeast winds are the effective winds in most southern latitudes. Erosional features in bedrock indicate long-term and perhaps ancient wind trends, whereas depositional features may record relatively more recent winds. Deflation pits in the mantled terrain may contain the best record of both ancient and present-day winds.

Ward, A. W.↗

Ice sheet margins and ice shelves

The effect of climate warming on the size of ice sheet margins in polar regions is considered. Particular attention is given to the possibility of a rapid response to warming on the order of tens to hundreds of years. It is found that the early response of the polar regions to climate warming would be an increase in the area of summer melt on the ice sheets and ice shelves. For sufficiently large warming (5-10C) the delayed effects would include the breakup of the ice shelves by an increase in ice drainage rates, particularly from the ice sheets. On the basis of published data for periodic changes in the thickness and melting rates of the marine ice sheets and fjord glaciers in Greenland and Antarctica, it is shown that the rate of retreat (or advance) of an ice sheet is primarily determined by: bedrock topography; the basal conditions of the grounded ice sheet; and the ice shelf condition downstream of the grounding line. A program of satellite and ground measurements to monitor the state of ice sheet equilibrium is recommended.

Thomas, R. H.↗

The geologic history of quartz-normative and olivine-normative basalts in the vicinity of Hadley Rille (Apollo 15)

The geologic history of the quartz normative (QNB) and olivine normative (ONB) basalt types at Hadley Rille are discussed. A model for the geology of the mare basalts was constructed from a combination of field observations, sample chemistry, sample petrology and personal bias from terrestrial experience. The model proposes that the QNBs are the only mare lava type that is present as outcrop in the area traversed by the astronauts during the Apollo 15 mission. The returned QNB samples formed during a single eruptive phase of the Hadley Rille lava tube system. The ONB lavas are an exotic component transported to the site by a cratering event, or the ONBs are samples excavated from older are bedrock that was partly covered by the QNB lavas.

Grove, T. L.↗

Paleodrainages of the Eastern Sahara - The radar rivers revisited (SIR-A/B implications for a mid-tertiary Trans-African drainage system)

The images obtained by the Shuttle Imaging Radar (SIR)-A and -B systems over the southwestern Egypt and northwestern Sudan were coregistered with the Landsat images and the existing maps to aid in extrapolations of the buried paleodrainages ('radar rivers'), first discovered by SIR-A. Field observations explain the radar responses of three types of radar rivers, RR-1 (broad, aggraded valleys filled with alluvium), RR-2 (braided channels inset in the RR-1 valleys), and RR-3 (narrow, long, bedrock-incised channels). A generalized model of the radar rivers, based on field studies and regional geologic relations, shows inferred changes in river regimen since the large valleys were established during the later Paleogene-early Neogene. It is suggested that a former Trans-African master stream system may have flowed from headwaters in the Red Sea Hills southwestward across North Africa, discharging into the Atlantic at the Paleo-Niger delta, prior to the Neogene domal uplifts and building of volcanic edifices across the paths of these ancient watercourses.

Mccauley, J. F.↗

Kinematics at the intersection of the Garlock and Death Valley fault zones, California: Integration of TM data and field studies

The Garlock and Death Valley fault zones in SE California are two active strike-slip faults coming together on the east side of the Avawatz Mtns. The kinematics of this intersection, and the possible continuation of either fault zone, are being investigated using a combination of field mapping, and processing and interpretation of remotely sensed image data. Regional and local relationships are derivable from Thematic Mapper data (30 m resolution), including discrimination and relative age dating of alluvial fans, bedrock mapping, and fault mapping. Aircraft data provide higher spatial resolution over more limited areas. Hypotheses being considered are: (1) the Garlock fault extends east of the intersection; (2) the Garlock fault terminates at the intersection and the Death Valley fault continues southeastward; and (3) the Garlock fault has been offset right laterally by the Death Valley fault which continues to the southeast. Preliminary work indicates that the first hypothesis is invalid. From kinematic considerations, image analysis, and field work the third hypothesis is favored. The projected continuation of the Death Valley zone defines the boundary between the Mojave crustal block and the Basin and Range block.

Abrams, Michael↗

Terrace width variations in complex lunar craters

The widths of terrace structures in complex craters on the moon are compared to existing theoretical models of their origin. Terrace widths in an individual crater increase monotonically outward toward the crater rim. Similarly, the width W of the terraces lying closest to the rim of a crater of diameter D increases monotonically, obeying a least-squares power-law relation WS (km) = 0.09D exp 0.87 km). A simple model of slumping that ignores inertial forces and assumes a constant bedrock yield strength is in good agreement with the observations.

Pearce, Steven J.↗