Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “bayes methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Preliminary vibration design and test criteria considerations for the space shuttle

This paper presents some Marshall Space Flight Center preliminary vibration design and test criteria considerations for the space shuttle. The discussion is primarily concerned with the formulation of vibration criteria for the design and testing of the equipment installations on the shuttle. A recommended criteria format is presented with a discussion of when the vibration environment has to be considered in design and testing. A semiempirical method of predicting the vibration criteria for the shuttle from vibroacoustic structural data banks is presented. Some preliminary vibration criteria predictions are presented for the orbiter and booster equipment bays and for the main shuttle engine. A research testing program to determine the vibroacoustic transfer through a typical shuttle thermal protection system (TPS) panel configuration is described.

Harry J. Bandgren↗

An evaluation of Space Shuttle STS-2 payload bay acoustic data and comparison with predictions

Space average sound pressure levels computed from measurements at 18 locations in the payload bay of the Space Shuttle orbiter vehicle during the STS-2 launch were compared with predicted levels obtained using the PACES computer program. The comparisons were performed over the frequency range 12.5 Hz to 1000 Hz, since the test data at higher frequencies are contaminated by instrumentation background noise. In general the PACES computer program tends to overpredict the space average sound levels in the payload bay, although the magnitude of the discrepancy is usually small. Furthermore the discrepancy depends to some extent on the manner in which the payload is modeled analytically, and the method used to determine the "measured' space average sound pressure levels. Thus the difference between predicted and measured sound levels, averaged over the 20 one third octave bands from 12.5 Hz to 1000 Hz, varies from 1 dB to 3.5 dB.

Wilby, J. F.↗

STS payload ground handling mechanism at John F. Kennedy Space Center

The payload ground handling mechanism (PGHM), which lifts payloads out of the payload canister that brings them to the launch pad, is described. The PGHM then loads the payloads into the orbiter through the open payload bay doors. The challenge was to provide this capability in time for space shuttle mission 31-A. Meeting this STS requirement was considerably more challenging than using the stacking method for loading payloads on top of expendable vehicles. The new mechanism and its main features are discussed.

Cassisi, V.↗

Buckling and vibration analysis of laminated panels using VICONOPT

The analysis aspects of the 23,000-line FORTRAN program VIPASA with constraints and optimization (VICONOPT) are described. Overall stiffness matrices assembled from the earlier exact vibration and instability of plate assemblies including shear and anisotropy (VIPASA) flat plate stiffnesses are optionally coupled by Langrangian multipliers to find critical buckling loads, or natural frequencies of undamped vibration, of prismatic assemblies of anisotropic flat plates with arbitrarily located point supports or simple transverse supporting frames. The longitudunal continuity of typical wing and fuselage panels is closely approximated because the solutions are for the infinitely long structure obtained by repeating a bay and its supports longitudinally. Any longitudinally invariant in-plane plate stresses are permitted, and very rapid solutions are guaranteed by numerous refinements, including multilevel substructuring and a method for repetitive cross sections that is exact for regular polygons used to represent cylinders. Modal displacements and stresses in or between plies of laminated plates are calculated and plotted, with values being recovered at all nodes of substructures. Comparison with usual approximate finite-element methods confirms that, for comparably converged solutions, VICONOPT is typically between 100 and 10(exp 4) times faster.

Kennedy, David↗

STS-77 Flight Day 4

On this fourth day of the STS-77 mission, the flight crew, Cmdr. John H. Casper, Pilot Curtis L. Brown, Jr., and Mission Specialists Andrew S.W. Thomas, Ph.D., Daniel W. Bursch, Mario Runco, Jr., and Marc Garneau, Ph.D., turned their attention to the deployment of a small technology demonstration satellite known as PAMS. The Passive Aerodynamically Stabilized Magnetically-damped Satellite uses aerodynamic stabilization to orient itself properly and demonstrates a technique that could prolong the lifetime of a satellite by reducing or eliminating the requirement for attitude control propellants. After Mission Specialist Mario Runco deploys the satellite from a canister in the rear of Endeavour's payload bay, it drifts away from the orbiter in a rotating, unstable attitude by design to evaluate how quickly and effectively the spacecraft can stabilize itself using the aerodynamic stabilization method rather than by thrusters. Later in the day, the crew is seen being interviewed by Canadian Television.

Source record↗

Using Science Skills to Understand Ecophysiology and Manage Resources

Presentation will be for a general audience and focus on plant science and ecosystem science in NASA. Examples from the projects involving the presenter will be used to illustrate. Specifically, the California Sacramento-San Joaquin River Delta project. This collaboration supports the goals of the Delta Plan in developing science-based, adaptive-management strategies. The mission is to improve reliability of water supply and restore a healthy Delta ecosystem while enhancing agriculture and recreation. NASA can contribute gap-filling science understanding of overall functions in the Delta ecosystem and assess and help develop management plans for specific issues. Airborne and satellite remote-sensing, ecosystem modeling, and biological studies provide underlying data needed by Delta stakeholders to assess and address water, ecosystem restoration, and environmental and economic impacts of potential actions in the Delta. The California Sacramento-San Joaquin River Delta, the hub for California's water supply, supports important ecosystem services for fisheries, supplies drinking water for millions, and distributes water from Northern California to agriculture and urban communities to the south; millions of people and businesses depend on Delta water. Decades of competing demands for Delta resources and year-to-year variability in precipitation has resulted in diminished overall health of the Delta. Declines in fish populations, threatened ecosystems, endangered species, invasive plants and animals, cuts in agricultural exports, and increased water conservation is the result. NASA and the USDA, building on previous collaborations, aide local Delta stakeholders in assessing and developing an invasive weed management approach. Aquatic, terrestrial, and riparian invasive weeds threaten aquatic and terrestrial ecosystem restoration efforts. Aquatic weeds are currently detrimental economically, environmentally, and sociologically in the Delta. They negatively impact the redistribution of water and disrupt the ecology of the Bay Delta food web. Filling current science gaps in the Delta Plan and improving management practices within the Delta are important to achieving the mission of improved Delta health. Methods developed can become routine land and water management tools. New high-resolution NASA sensor systems could be used to provide data packages specifically designed for water system The presenter will also speak about his personal experience and the role Delaware Valley College played in preparation for a professional career science.

Water↗

Periodicity significance testing with null-signal templates: reassessment of PTF’s SMBH binary candidates

Periodograms are widely employed for identifying periodicity in time series data, yet they often struggle to accurately quantify the statistical significance of detected periodic signals when the data complexity precludes reliable simulations. We develop a data-driven approach to address this challenge by introducing a null-signal template (NST). The NST is created by carefully randomizing the period of each cycle in the periodogram template, rendering it non-periodic. It has the same frequentist properties as a periodic signal template, and we show with simulations that the distribution of false positives is the same as with the original periodic template, regardless of the underlying data. Thus, performing a periodicity search with the NST acts as an effective simulation of the null (no-signal) hypothesis, without having to simulate the noise properties of the data. We apply the NST method to the supermassive black hole binaries (SMBHB) search in the Palomar Transient Factory (PTF), where Charisi et al. had previously proposed 33 high signal-to-noise candidates utilizing simulations to quantify their significance. Our approach reveals that these simulations do not capture the complexity of the real data. There are no statistically significant periodic signal detections above the non-periodic background. To improve the search sensitivity, we introduce a Gaussian quadrature based algorithm for the Bayes Factor with correlated noise as a test statistic. We show with simulations that this improves sensitivity to true signals by more than an order of magnitude. However, the Bayes Factor approach also results in no statistically significant detections in the PTF data.

79 ASTRONOMY AND ASTROPHYSICS↗

Evaluation of Shortwave Infrared Atmospheric Correction for Ocean Color Remote Sensing of Chesapeake Bay

The NASA Moderate Resolution Imaging Spectroradiometer onboard the Aqua platform (MODIS-Aqua) provides a viable data stream for operational water quality monitoring of Chesapeake Bay. Marine geophysical products from MODIS-Aqua depend on the efficacy of the atmospheric correction process, which can be problematic in coastal environments. The operational atmospheric correction algorithm for MODIS-Aqua requires an assumption of negligible near-infrared water-leaving radiance, nL(sub w)(NIR). This assumption progressively degrades with increasing turbidity and, as such, methods exist to account for non-negligible nL(sub w)(NIR) within the atmospheric correction process or to use alternate radiometric bands where the assumption is satisfied, such as those positioned within shortwave infrared (SWIR) region of the spectrum. We evaluated a decade-long time-series of nL(sub w)(lambda) from MODIS-Aqua in Chesapeake Bay derived using NIR and SWIR bands for atmospheric correction. Low signal-to-noise ratios (SNR) for the SWIR bands of MODIS-Aqua added noise errors to the derived radiances, which produced broad, flat frequency distributions of nL(sub w)(lambda) relative to those produced using the NIR bands. The SWIR approach produced an increased number of negative nL(sub w)(lambda) and decreased sample size relative to the NIR approach. Revised vicarious calibration and regional tuning of the scheme to switch between the NIR and SWIR approaches may improve retrievals in Chesapeake Bay, however, poor SNR values for the MODIS-Aqua SWIR bands remain the primary deficiency of the SWIR-based atmospheric correction approach.

Werdell, P. Jeremy↗

Applications of remote sensing to estuarine management

Projects for sewage outfall siting for pollution control in the lower Chesapeake Bay wetlands are reported. A dye-buoy/photogrammetry and remote sensing technique was employed to gather circulation data used in outfall siting. This technique is greatly favored over alternate methods because it is inexpensive, produces results quickly, and reveals Lagrangian current paths which are preferred in making siting decisions. Wetlands data were obtained by interpretation of color and color infrared photographic imagery from several altitudes. Historical sequences of photographs are shown that were used to document wetlands changes. Sequential infrared photography of inlet basins was employed to determine tidal prisms, which were input to mathematical models to be used by state agencies in pollution control. A direct and crucial link between remote sensing and management decisions was demonstrated in the various projects.

Munday, J. C., Jr.↗

Payload deployment method and system

A method and apparatus for deploying the payload of space shuttle craft or the like. The payload rotated about an axis outside of the payload but approximately longitudinally of the cargo bay of the shuttle craft. The payload may thus be rotated, through ninety degrees. In this case, that is in its rotated position, the payload may or may not have a small portion located within the cargo bay. Alternatively, the payload may be located completely outside of the bay. According to the apparatus two separable hinge-like devices connect at one longitudinal side or edge of the payload to respective ones of the payload trunnions at different longitudinally spaced locations along the length of the payload. Separation of the payload from the cargo bay is made unlatching a latch and by the use of a repulsion spring at the position of each hinge-like device. Two four-link mechanisms allow movement between payload and bay. Such accoommodative movement is required especially during launch when considerable vibration is encountered.

Barnett, Clifford J.↗

Fluid Lensing and Applications to Remote Sensing of Aquatic Environments

The use of fluid lensing technology on UAVs is presented as a novel means for 3D imaging of aquatic ecosystems from above the water's surface at the centimeter scale. Preliminary results are presented from airborne fluid lensing campaigns conducted over the coral reefs of Ofu Island, American Samoa (2013) and the stromatolite reefs of Shark Bay, Western Australia (2014), covering a combined area of 15km2. These reef ecosystems were revealed with centimetre-scale 2D resolution, and an accompanying 3D bathymetry model was derived using fluid lensing, Structure from Motion and UAV position data. Data products were validated from in-situ survey methods including underwater calibration targets, depth measurements and millimetre-scale high-dynamic range gigapixel photogrammetry. Fluid lensing is an experimental technology that uses water transmitting wavelengths to passively image underwater objects at high-resolution by exploiting time-varying optical lensing events caused by surface waves. Fluid lensing data are captured from low-altitude, cost-effective electric UAVs to achieve multispectral imagery and bathymetry models at the centimetre scale over regional areas. As a passive system, fluid lensing is presently limited by signal-to-noise ratio and water column inherent optical properties to approximately 10 m depth over visible wavelengths in clear waters. The datasets derived from fluid lensing present the first centimetre-scale images of a reef acquired from above the ocean surface, without wave distortion. The 3D multispectral data distinguish coral, fish and invertebrates in American Samoa, and reveal previously undocumented, morphologically distinct, stromatolite structures in Shark Bay. These findings suggest fluid lensing and multirotor electric drones represent a promising advance in the remote sensing of aquatic environments at the centimetre scale, or 'reef scale' relevant to the conservation of reef ecosystems. Pending further development and validation of fluid lensing methods, these technologies present a solution for large-scale 3D surveys of shallow aquatic habitats with centimetre-scale spatial resolution and hourly temporal sampling.

Aquatic↗

Relevance of ERTS to the State of Ohio

The author has identified the following significant results. The ability to delineate and inventory strip mined areas using ERTS-1 imagery has been established. This gives Ohio a method to rapidly gain an up-to-date inventory of strip mined lands for state planning purposes, which has not been available previously. Smoke plume detection and sedimentation patterns in Sandusky Bay have also been determined from initial analysis of ERTS-1 data.

Sweet, D. C.↗

Trapped rubber processing for advanced composites

Trapped rubber processing is a molding technique for composites in which precast silicone rubber is placed within a closed cavity where it thermally expands against the composite's surface supported by the vessel walls. The method has been applied by the Douglas Aircraft Company, under contract to NASA-Langley, to the design and fabrication of 10 DC-10 graphite/epoxy upper aft rudder assemblies. A three-bay development tool form mold die has been designed and manufactured, and tooling parameters have been established. Fabrication procedures include graphite layup, assembly of details in the tool, and a cure cycle. The technique has made it possible for the cocured fabrication of complex primary box structures otherwise impracticable via standard composite material processes.

Marra, P. J.↗

Using experimental modal data to detect damage in a space truss

The effects of damage on a model space truss are investigated using experimentally measured modes along with a procedure that uses the vibratory residual forces and a weighted sensitivity analysis to estimate the extent of mass and/or stiffness variations, where damage is characterized as a reduction in structural stiffness. It is shown that this approach yields excellent results for a four-bay space truss under consideration and was able to accurately predict not only the location of the damage region but also estimate the relative severity for three different configurations. In addition, the method was able to accurately detect and differentiate a shift in structural mass.

Tavares, R.↗

Demonstration of Autonomous Nested Search for Local Maxima using an Unmanned Underwater Vehicle, ICRA Submission

Ocean Worlds represent one of the best chances for extra-terrestrial life in our solar system. A new mission concept must be developed to explore these oceans. This mission would require traversing the 10s of km thick icy shell and releasing a submersible into the ocean below. During the transit of the icy shell and the exploration of the ocean, the vehicle(s) would be out of contact with Earth for weeks or potentially months at a time. During this time the vehicle must have sufficient autonomy to locate and study scientific targets of interest. One such target of interest is hydrothermal venting. We have previously developed an autonomous nested search method to locate and investigate sources of hydrothermal venting by locating local maxima in hydrothermal vent emissions. In this work we demonstrate this approach on board an OceanServer Iver2 AUV in Chesapeake Bay, MD using simulated sensor data from a hydrothermal plume model. This represents the first step towards the deployment of this approach in conditions analogous to those that we might expect on an Ocean World.

Branch, Andrew↗

Evaluation of Correction Methods for NASA GeneLab Transcriptomic Datasets

Conducting space biology experiments aboard the International Space Station, particularly those utilizing complex model organisms like mice, is expensive and difficult due to limited crew availability, hardware, and space. As a result, sample numbers from these studies are low, reducing the statistical power of any one experiment. Aggregating spaceflight datasets serves as a method to increase sample numbers, allowing for novel insights through bioinformatic analysis of ‘omics data from merged datasets. However, aggregating datasets can introduce unwanted variation including 1) differences in sample handling, processing, and sequencing platforms between datasets (technical variation) as well as 2) differences in experimental design between datasets. In the present study, NASA GeneLab-hosted RNAseq datasets from mouse liver tissues were used to evaluate several statistical methods to correct for this unwanted variation through two approaches, reference-based and standard. The following correction algorithms were applied with (reference-based) and/or without (standard) considering Universal Mouse RNA Reference samples: ComBat and ComBat_seq from the SVA package, median polish, empirical Bayes, and ANOVA-based algorithms from the MBatch package, and negative binomial regression normalization in the DESeq2 package. For each approach, after the correction algorithm was applied, differential gene expression (DGE) analysis of flight and ground control samples was performed with the combined data. The robustness of each tool was evaluated using BatchQC to determine statistical differences between datasets before and after correction, Principal Component Analysis to evaluate global gene expression in samples before and after correction, and by comparing DGE analysis of individual datasets and combined datasets before and after correction. The results showed that the reference-based approach introduced several additional (and likely artificial) DEGs when compared with the respective standard approach. Of the methods tested, standard ComBat and DESeq2 were identified as the most robust correction methods for combining spaceflight mouse liver RNAseq datasets hosted on GeneLab.

GeneLab↗

Application of LANDSAT MSS data to the study of oceanographical environment

The author has identified the following significant results. LANDSAT MSS data of a three year time lapse indicate change of sea surface condition in Seto Inland Sea and coastal region. The red tide which formerly concentrated in the bay or inland sea now extends into an open sea. A small ocean vortex similar to mesoscale atmospheric vortex is revealed by the band 4 image of the satellite data. A manual photographic method applied to a single band image of MSS is effective in detecting sea surface pollution.

Maruyasu, T.↗

Microwave reflector characterization using simple instruments in EVA

An antenna with rigid panels which can be measured under ground conditions, carried to space in a packaged condition, deployed into a form similar to the Earth-measured one, measured under space conditions, restowed, and brought back to Earth so that the original measurements can be verified is the type being proposed for this experiment. The antenna chosen will be measured under ground conditions, carried aloft, deployed into its antenna shape, lifted by the remote manipulator system to a position where it can be sighted by two astronauts at the two theodolites, and held there until the surface characterization can be completed. An alternate method would be to use photogrammetry and take pictures of the surface from the payload handling station. After the surface characterization is completed, the antenna will be folded and restowed into the Shuttle bay for return to Earth. The surface characterization will be repeated on Earth after its return for verification both of the original measurement taken on Earth and the measurement taken in space.

Goslee, J. W.↗