SEARCH · Engineering Papers

Results for “aqueous electrolytes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Verification Testing of OLI Systems Mixed Solvent Electrolyte Model for the Na-K-Mg-Ca-H-Cl-SO 4 -OH-HCO 3 -CO 3 -CO 2 -H 2 ) System to High Ionic Strength at 25°C

This technical report summarizes model verification results and summary statistics for 41 evaporite mineral solubility cases evaluated by Savannah River National Laboratory using OLI Systems’ aqueous electrolyte thermodynamic modeling software. The 41 verification cases containing a total of 60 solubility curves comprise mineral solubility data from low to high ionic strength at 25°C for the eight-component system Na-K-Mg-Ca-H-Cl-SO 4 -OH-HCO 3 -CO 3 -CO 2 -H 2 O as reported by Harvie et al. (1984). Thermodynamic calculations were executed using OLI Systems’ Stream Analyzer computation module within the OLI Studio software platform (Ver. 11.0, Rev. 11.0.1.9). The Mixed Solvent Electrolyte (MSE) thermodynamic framework was chosen for this investigation because of its superiority in modeling high ionic-strength inorganic salt solutions and actinide redox chemistry and solubility, both of which are relevant to the geological repository conditions at the Waste Isolation Pilot Plant in Carlsbad, New Mexico. Mineral solubility data in various inorganic salt solutions were digitized and extracted from figures generated by Harvie et al. (1984). For each of the 60 solubility curves, a case-specific chemistry model and input file were generated in OLI Studio using OLI Stream Analyzer and the MSE (H 3 O + ion) public databank provided by OLI Systems. Model simulation results were exported to Microsoft Excel to calculate summary statistics and to generate graphs comparing the OLI model predictions to the solubility data. Summary statistics include residuals (model – data) and concordance (accuracy × precision, where precision is indicated by the Pearson correlation coefficient and accuracy accounts for bias and scale differential). Private databanks were not developed, and activity coefficient model regressions were not performed to improve OLI model fits to the data. Of the 41 model verification plots, 83% have a mean of the percent residuals less than or equal to 25%. Similarly, 75% display a concordance greater than or equal to 0.75. Only seven of the 41 verification plots fail to show good agreement between the model and data. Of these seven, three are relevant to the WIPP repository because they involve the Mg-OH-Cl-SO 4 -CO 3 aqueous system. The remaining four address salt solubilities at the pH extremes (strong acid and strong base). It should be noted that in two of the three Mg-OH-Cl-SO 4 -CO 3 system cases, the regressed Harvie et al. (1984) solubility curve also deviated from the data. Lack of agreement between the OLI model-predicted solubility curves and the data is attributable to one or more of the following: specific solid species are not included in the OLI MSE databank; there is significant variation among the different solubility datasets chosen by Harvie et al. (1984); the OLI MSE model’s thermodynamic parameters were determined using different solubility datasets; and the activity coefficient parameters for certain relevant ion-ion and ion-molecule pairs have not been optimized via data regression. Two recommendations for future work are to (1) evaluate solubility data for the Mg-OH-Cl-SO 4 -CO 3 system at high ionic strength and, if necessary, develop a private OLI MSE database that includes missing species and, where necessary, regressed standard state properties and interaction parameters; (2) perform similar verification testing of the OLI model for actinide solubility data.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2023

Ambipolar Electrochemistry of Pre‐Intercalated Ti 3 C 2 T x MXene in Ionic Liquid Electrolyte

Abstract Cation intercalation with or without redox remains the dominant charge storage mechanism for two‐dimensional (2D) Ti 3 C 2 T x MXene. Anion‐based charge storage remains unexplored due to intrinsic negative surface charge of MXenes preventing spontaneous intercalation of anions and irreversible oxidation of Ti at anodic potentials in aqueous electrolytes. In this work, we report on the ambipolar electrochemical behavior of the Ti 3 C 2 T x in ionic liquid electrolyte over a 2.5 V electrochemically stable window. The experiments are conducted on a thin Ti 3 C 2 T x film current collector coated with an electroactive layer of small flakes (∼150 nm) of Ti 3 C 2 T x pre‐intercalated with 1‐ethyl‐3‐methylimidazolium bis‐(trifluoromethylsulfonyl)‐imide (EMIM‐TFSI) ionic liquid. Couples of redox peaks with a very small potential separation during the voltage sweep are observed at high negative (−0.75 V vs. Ag wire) and high positive (+0.75 V vs. Ag wire) potentials. Our experimental electrochemical data combined with density functional theory (DFT) calculations suggest feasibility of pseudo‐intercalation of TFSI anions between Ti 3 C 2 T x flakes. This study provides a pathway for elucidating anion intercalation for different MXene chemistries in solvent‐free electrolytes, which can lead to development of MXene based energy storage devices with improved performance.

Electrochemistry↗

DOE OSTI2026

Conformational Isomerization of Imide Anions Governs Solvation and Transport in Water-in-Salt Electrolytes

The behavior of highly concentrated electrolytes departs radically from the dilute-solution theory, yet the molecular origin of this transformation remains unresolved. Here, we identify the conformational isomerization of molecular ions as a decisive, previously unrecognized control parameter governing structure and transport in crowded aqueous electrolytes. Across a series of fluorosulfonimide anions, we show that increasing concentration drives a collective shift from extended transoid to compact cisoid conformers, revealed by small-angle X-ray scattering, vibrational spectroscopy, pulsed-field gradient NMR, and molecular dynamics simulations. This conformational transition triggers a collapse of the hydrogen-bonded water network and the emergence of densely packed ionic domains with confined water, producing a qualitative change in Li+ transport from solvent-mediated diffusion to network-confined hopping. Anion size and asymmetry systematically tune the onset of this transition, demonstrating that molecular geometry dictates mesoscale organization and dynamics in the ion-rich regime. Our results establish ion conformation, not merely composition or coordination, as a fundamental thermodynamic variable in concentrated solutions, providing a chemical framework that unifies solvation structure and transport in water-in-salt electrolytes and suggesting new principles for designing dense ionic media.

Nguyen, Huong TD↗

DOE OSTI2021

An Ultrastable Aqueous Iodine-Hydrogen Gas Battery

Rechargeable hydrogen gas batteries are highly desirable for large-scale energy storage because of their long life cycle, high round trip efficiency, fast reaction kinetics, and hydrogen gas profusion. Coupling advanced cathode chemistries with hydrogen gas anode is an emerging and exciting area of research. Here, a novel high-performance aqueous iodine-hydrogen gas (I 2 -H 2 ) battery using iodine as cathode and hydrogen gas as the electrocatalytic anode in environmentally benign aqueous electrolytes is reported. The working chemistry of the battery involves I 2 /I - solid-liquid reactions occurring over the cathode along with H 2 /H 2 O gas-liquid reactions at the anode, achieving a high rate performance of 100 C and long-lasting stability of over 60 000 cycles. Additionally, the static aqueous I 2 -H 2 battery displays a volumetric capacity of 15.5 Ah L -1 along with good self-healing capability towards cell overcharge. The current battery design exhibits robust electrochemical performance irrespective of acidic, neutral, and alkaline electrolyte systems. This study paves the way towards the industrialization of economically effective, high-power density, and long-term I 2 -H 2 batteries for large-scale energy storage applications.

08 HYDROGEN↗

DOE OSTI2020

Atomistic Insight into Cation Effects on Binding Energies in Cu-Catalyzed Carbon Dioxide Reduction

Electrolyte properties in general and electrolyte ions in particular have been shown to have significant effects on the kinetics of electrochemical CO 2 and CO reduction at metal electrodes, but these effects have not yet been fully understood. Here, we investigate the effects of cations at the aqueous electrolyte–Cu(211) interface on adsorbate binding energies and the electrolyte structure using density functional theory (DFT). Charging the interface via explicit Na + has systematic effects on adsorbate–electrolyte interactions and conformations. We describe specific local adsorbate–ion interactions, including direct alkali ion–adsorbate coordination and hydrogen bonding via ion-coordinated water molecules. The relative importance of these specific interactions and purely electrostatic field–adsorbate interactions is investigated by comparing the DFT-calculated ion effects to those predicted by purely electrostatic models of the interface and the adsorbates. We find that the trend in ion effects among different adsorbates at constant surface charge density is well explained by a purely electrostatic interaction model. The binding energy of OCCHO is found to depend strongly on the surface charge density as well as the spatial distribution of ions at constant surface charge density. These effects are also explained by a purely electrostatic local electrostatic field–adsorbate model. This indicates that alkali ion effects can be mainly attributed to purely electrostatic field interactions and that the local field at ion-stabilized active sites can depend significantly on both the overall charge density and on the spatial distribution of ions at constant charge density. This work provides new insight on alkali ion effects on a variety of adsorbates relevant to the CO 2 and CO reduction reactions by describing specific local ion–adsorbate interactions, systematic changes in adsorbate–electrolyte interactions induced by explicit surface charge, and comparisons of the calculated effects on binding energies to simple electrostatic field–adsorbate models to explain trends among various adsorbates and at varying surface charge densities and supercell configurations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Water-coupled monovalent and divalent ion transport in polyviologen networks

Redox-active polymers (RAPs) are of interest as environmentally friendly and earth-abundant energy storage materials. Polyviologens are promising RAPs, but they tend to dissolve during operation. Further, the two-electron redox reaction for polyviologens in various electrolytes is not always reversible, highlighting the need for a deeper understanding of the redox mechanism. Here, the energy storage mechanism for a cross-linked viologen (PTPM) is demonstrated using electrochemical quartz crystal microbalance with dissipation monitoring (EQCM-D), comparing NaCl and Na2SO4 aqueous electrolytes. E-QCMD reveals that the ion-electron transport mechanism is strongly dependent on the valency of the anion. More sudden and dramatic changes in the electrode's mass were observed for the divalent sulfate ion as compared to the smooth mass transitions associated with the monovalent chloride ion. Meanwhile, there was marked hysteresis in the mass transfer profile for NaCl, but little hysteresis for Na2SO4. Our results demonstrate that electrolyte design, and specifically ion valency, will have a large impact on the nature of mass transport in polymer-based electrodes. This work enables electrolyte selection for the next generation polymer batteries with improved performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Titanium Carbide MXene Shows an Electrochemical Anomaly in Water-in-Salt Electrolytes

Identifying and understanding charge storage mechanisms is important for advancing energy storage. Well-separated peaks in cyclic voltammograms (CVs) are considered key indicators of diffusion-controlled electrochemical processes with distinct Faradaic charge transfer. Herein, we report on an electrochemical system with separated CV peaks, accompanied by surface-controlled partial charge transfer, in 2D Ti 3 C 2 T x MXene in water-in-salt electrolytes. The process involves the insertion/desertion of desolvation-free cations, leading to an abrupt change of the interlayer spacing between MXene sheets. This unusual behavior increases charge storage at positive potentials, thereby increasing the amount of energy stored. This also demonstrates opportunities for the development of high-rate aqueous energy storage devices and electrochemical actuators using safe and inexpensive aqueous electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Revealing the Fast and Durable Na + Insertion Reactions in a Layered Na 3 Fe 3 (PO 4 ) 4 Anode for Aqueous Na-Ion Batteries

Aqueous sodium-ion batteries represent a promising approach for stationary energy storage; however, the lack of appropriate anode materials has substantially retarded their development. Herein, we demonstrated an iron-based phosphate material of Na 3 Fe 3 (PO 4 ) 4 as an inexpensive and efficacious anode alternative. While the Fe 3+ /Fe 2+ redox couple renders a two-Na-insertion reaction with desirable potentials, its unique layered structure further facilitates the Na-insertion kinetics and reversibility. Consequently, this electrode exhibits an appealing Na-insertion performance, with a reversible capacity of ~83 mAh g –1 , suitable anode potential of -0.4 V vs Ag/AgCl, excellent rate capability of 200 C, and outstanding cycling of 6000 cycles. Utilizing operando synchrotron X-ray diffraction and X-ray absorption spectroscopy, we revealed the structural evolution of the Na 3 Fe 3 (PO 4 ) 4 anode during the two-electron reaction, where the extremely small volume expansion (~3%) enables its fast-charging and long-cycling capability. Our work suggests new considerations of developing versatile iron phosphate compounds as appealing anode materials for energy storage in aqueous electrolytes.

25 ENERGY STORAGE↗

DOE OSTI2020

Redox Flow Battery Having Metal-Ligand Complex

Researchers at Los Alamos National Laboratory have developed new non-aqueous electrolyte materials for redox flow batteries (RFB). These batteries are a viable technology for scalable energy storage beyond lithium ion batteries. Cost is currently limiting deployment, with poor energy density being the primary culprit. One way to improve energy density is by increasing the cell potential beyond the current limit in aqueous media. The higher cell potential and additional electrons stored per molecule will increase the energy density of the RFB medium, overcoming a critical limitation to the current RFBs. Like lithium ion batteries, RFB's can span from the kW to multi MW power storage systems. The nickel complexes described herein have demonstrated redox potentials >3 V which is at least twice the aqueous limit. We are interested in partnering with battery developers to further advance this technology to the product prototype stage.

25 ENERGY STORAGE↗

DOE OSTI2022

High-Energy and Stable Subfreezing Aqueous Zn–MnO 2 Batteries with Selective and Pseudocapacitive Zn-Ion Insertion in MnO 2

One major challenge of aqueous Zn–MnO 2 batteries for practical applications is their unacceptable performance below freezing temperatures. Here, in this study, the use of simple Zn(ClO 4 ) 2 aqueous electrolytes is described for all-weather Zn–MnO 2 batteries even down to -60 °C. The symmetric, bulky ClO 4 - anion effectively disrupts hydrogen bonds between water molecules and provides intrinsic ion diffusion even while frozen, and enables ≈260 mAh g -1 on MnO 2 cathodes at -30 °C . It is identified that subfreezing cycling shifts the reaction mechanism on the MnO 2 cathode from unstable H+ insertion to predominantly pseudocapacitive Zn 2+ insertion, which converts MnO 2 nanofibers into complicated zincated MnO x that are largely disordered and appeared as crumpled paper sheets. The Zn 2+ insertion at -30 °C is faster and much more stable than at 20 °C, and delivers ≈80% capacity retention for 1000 cycles without Mn 2+ additives. In addition, simple Zn(ClO 4 ) 2 electrolyte also enables a nearly fully reversible and dendrite-free Zn anode at -30 °C with ≈98% Coulombic efficiency. Zn–MnO 2 prototypes with an experimentally verified unit energy density of 148 Wh kg -1 at a negative-to-positive ratio of 1.5 and an electrolyte-to-capacity ratio of 2.0 are further demonstrated.

25 ENERGY STORAGE↗

DOE OSTI2023

Revealing the Correlation between the Solvation Structures and the Transport Properties of Water-in-Salt Electrolytes

Water-in-salt (WIS) electrolytes containing 21 m lithium bis(trifluoromethane sulfonyl)imide (LiTFSI) have been considered as a safe and environment-friendly alternative to common organic electrolytes used in lithium-ion batteries. However, the relation between the solvation structures and transport properties of these materials remains elusive. Here, for this paper, we performed small-angle X-ray scattering (SAXS), small-angle neutron scattering (SANS), and X-ray pair distribution function (PDF) measurements of LiTFSI aqueous solutions at a wide range of concentrations. Combined with molecular dynamics simulations, the detailed solvation structures from long to short length scale were resolved. We found that the TFSI– solvation structures consist of TFSI– solvated structures and TFSI– networks; the former corresponds to solvent separated ion pairs, while the latter corresponds to contact ion pairs and cation–anion aggregates. In addition, we found that the relaxation time in the q range associated with the anion network structure exhibits the same concentration dependence as the viscosity. By combining the results from the experiments and simulations, this study revealed a correlation between the solvation structures of LiTFSI and the transport properties of the solutions, which is critical to understand the relation between the transport properties and the dynamics of the ions for imide-based lithium-ion salt aqueous electrolytes.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Mild-Annealed Molecular Layer Deposition (MLD) Tincone Thin Film as Photoelectrochemically Stable and Efficient Electron Transport Layer for Si Photocathodes

Metalcone thin films, composed of inorganic–organic hybrids, are synthesized using molecular layer deposition (MLD) through reactions between organometallic precursors (e.g., Sn, Al, and Ti) and organic reactants (e.g., ethylene glycol and glycerol). Despite their unique properties, metalcones exhibit significant vulnerability to water due to their organic components, limiting their potential in electrochemical applications. This study focuses on enhancing the photoelectrochemical stability of tincone thin films in aqueous electrolyte while preserving their hybrid characteristics through mild annealing in air at 250 °C. As-deposited and vacuum-annealed tincone thin films exhibited significant degradation under these conditions, while high-temperature-annealed (500 °C) tincone thin films offered improved stability with a significant decline in charge transfer efficiency. In contrast, mild annealing in air maintained the C–O bond at half level and improved the stability and charge transport without compromising the unique characteristics of tincone. This was confirmed by ellipsometry, X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FTIR). Mild-annealed tincone deposited on a lightly doped p-type silicon (p-Si) photocathode produced a 20-fold increase in CO volume compared to high-temperature annealed tincone in a CO 2 -saturated potassium bicarbonate (KHCO 3 ) electrolyte with dispersed graphene oxide–cobalt phthalocyanine (GO-CoPc) under 1 sun illumination at 0.9 V vs reversible hydrogen electrode (RHE), while maintaining the faradaic efficiency for CO and H 2 . These results suggest that mild-annealed tincone thin films hold significant potential as protective charge transport layers on silicon photocathodes for the aqueous CO 2 reduction reaction (CO 2 RR).

Annealing (metallurgy)↗

DOE OSTI2025

Electrochemical CO 2 Capture by a Quinone-Based Covalent Organic Framework

Electrochemical CO 2 capture is an emerging technology that promises to be more energy-efficient than traditional thermal or pressure-swing processes. Herein, the first evidence of electrochemical capture of CO 2 using a covalent organic framework (COF) is presented. We hypothesized that the assembly of anthraquinone units into a well-defined porous framework electrode would lead to enhanced electrochemical CO 2 capture compared to previous approaches that grafted anthraquinones on carbon supports and suffered from low CO 2 capacities and stabilities. To test this, an anthraquinone-based COF is employed, and it is found that the quinones are electrochemically accessible for reversible CO 2 capture in an ionic liquid electrolyte. The system achieves a high electrochemical CO 2 uptake capacity >2.6 mmol g –1 COF, reaching half of the theoretical CO 2 capacity of the material and surpassing the capacities of anthraquinone-functionalized carbons. The stability and CO 2 uptake rate issues encountered with the ionic liquid system are also addressed by using aqueous electrolytes where we attained stable carbon capture for 500 cycles with a 99.6% Coulombic efficiency and an electrical energy consumption of 31 kJ mol CO 2 –1 . The use of covalent organic framework electrodes can become a general strategy for understanding and enhancing the electrochemical CO 2 capture.

carbon capture and storage↗

DOE OSTI2021

Dynamic and weak electric double layers in ultrathin nanopores

The unique properties of aqueous electrolytes in ultrathin nanopores have drawn a great deal of attention in a variety of applications, such as power generation, water desalination, and disease diagnosis. Inside the nanopore, at the interface, properties of ions differ from those predicted by the classical ionic layering models (e.g., Gouy–Chapman electric double layer) when the thickness of the nanopore approaches the size of a single atom (e.g., nanopores in a single-layer graphene membrane). Here, using extensive molecular dynamics simulations, the structure and dynamics of aqueous ions inside nanopores are studied for different thicknesses, diameters, and surface charge densities of carbon-based nanopores [ultrathin graphene and finite-thickness carbon nanotubes (CNTs)]. The ion concentration and diffusion coefficient in ultrathin nanopores show no indication of the formation of a Stern layer (an immobile counter-ionic layer) as the counter-ions and nanopore atoms are weakly correlated in time compared to the strong correlation observed in thick nanopores. The weak correlation observed in ultrathin nanopores is indicative of a weak adsorption of counter-ions onto the surface compared to that of thick pores. The vanishing counter-ion adsorption (ion–wall correlation) in ultrathin nanopores leads to several orders of magnitude shorter ionic residence times (picoseconds) compared to the residence times in thick CNTs (seconds). The results of this study will help better understand the structure and dynamics of aqueous ions in ultrathin nanopores.

2D materials↗

DOE OSTI2023

Direct Experimental Observations of Ion Distributions during Overcharging at the Muscovite–Water Interface by Adsorption of Rb + and Halides (Cl – , Br – , I – ) at High Salinity

Classical electric double layer (EDL) models have been widely used to describe ion distributions at charged solid-water interfaces in dilute electrolytes. However, the chemistry of EDLs remains poorly constrained at high ionic strength where ion-ion correlations control non-classical behavior such as overcharging, i. e., the accumulation of counter-ions in amounts exceeding the substrate's surface charge. Here, we provide direct experimental observations of correlated cation and anion distributions adsorbed at the muscovite (001)-aqueous electrolyte interface as a function of dissolved RbBr concentration ([RbBr]=0.01–5.8 M) using resonant anomalous X-ray reflectivity. Our results show alternating cation-anion layers in the EDL when [RbBr]≳100 mM, whose spatial extension (i. e., ~20 Å from the surface) far exceeds the dimension of the classical Stern layer. Comparison to RbCl and RbI electrolytes indicates that these behaviors are sensitive to the choice of co-ion. This new in-depth molecular-scale understanding of the EDL structure during transition from classical to non-classical regimes supports the development of realistic EDL models for technologies operating at high salinity such as water purification applications or modern electrochemical storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Bipolar Membranes for Ion Management in (Photo)Electrochemical Energy Conversion

Conspectus (Photo)electrochemical energy conversion is important in the development of a carbon-neutral energy economy because it can provide a pathway for mitigating the intermittency of renewable energy sources such as wind and solar. In order to operate efficiently, these technologies, which include photoelectrochemical cells, water and CO 2 electrolyzers, fuel cells, and redox flow batteries, require fast charge transfer kinetics at the electrode/electrolyte interface as well as robust ion management in the electrolyte. In conventional electrolyzers and fuel cells, the electrolyte is strongly acidic or basic and ionic current is carried by H + or OH – ions. In contrast, photoelectrodes and electrocatalysts for water splitting are often studied in buffered solutions. The question of ion balance in these systems led us to analyze the polarization losses due to ion concentration gradients in cells that employed various buffer–membrane combinations. Continuously driving the buffer ions across an ionomer membrane not only lowers the buffer capacity of an aqueous electrolyte but also introduces pH gradients that result in significant energy losses. To address the problem, we and other groups have studied the use of reverse-biased bipolar membranes (BPMs) in (photo)electrolytic cells. BPMs consist of an anion exchange layer (AEL) laminated with a cation exchange layer (CEL) and are usually equipped with a catalytic layer in between to accelerate the water dissociation reaction. At the AEL/CEL interface, water dissociates into protons and hydroxide ions, which replenish those consumed at the cathode and anode. Compared to conventional water electrolyzers with proton/anion exchange membranes (PEM/AEM), BPM electrolyzers provide the unique advantage of continuously operating the cathode and anode under different pH conditions, which is desirable when the two electrode reactions have different pH requirements. BPMs also enable the use of buffered electrolytes at pH values that are optimized for electrode stability and product selectivity in applications such as CO 2 electrolysis. Product crossover losses and CO 2 pumping can be dramatically reduced in BPM-based CO 2 electrolyzers, relative to conventional alkaline membranes, by electrostatic repulsion (of anionic products) and electroosmotic drag (for neutral products). BPM-based gas fed CO 2 electrolyzers can achieve high current density, but they suffer from low Faradaic efficiency (FE) due to the acidic local environment of the CEL. This problem can be mitigated by adding an aqueous buffering layer or by creating a weak acid cation exchange film on the CEL face of the membrane. The use of BPMs in fuel cells and redox flow batteries offers some interesting advantages. Configurations with both reverse and forward bias have been studied, but forward bias has been favored due to material compatibility, reaction kinetics, and thermodynamic considerations. The net reaction at the AEL/CEL interface is the acid–base neutralization reaction, which has a high inherent reaction rate constant, but in the BPM is limited to a nanometric space-charge layer and requires efficient catalysis to achieve high current density. Understanding the mechanism of the acid–base neutralization and the opposite process, the water dissociation reaction, will be essential for improving the performance of forward-biased BPMs. In conclusion, this Account reviews our current understanding of the working mechanisms of BPMs and discusses how we can use them to effectively manage ions for various (photo)electrochemical applications.

Yan, Zhifei↗

DOE OSTI2023

The apparent reversal of the Law of Mass Action in concentrated multicomponent aqueous solutions

Although it is well known that aqueous electrolyte solutions behave non-ideally, few are so non-ideal that adding an electrolyte to a saturated solution with a common ion enhances rather than depresses solubility. Nonetheless, this apparent reversal of the Law of Mass Action (LMA) has been observed in simple nitrate solutions at high concentrations. A leading hypothesis is that ion clusters are formed and stabilized by ions having different charge densities. We report the present study examines this concept, in part by reviewing relevant data from multicomponent aqueous solutions containing sodium nitrate (NaNO 3 ), sodium nitrite (NaNO 2 ), sodium hydroxide (NaOH), and sodium aluminate (NaAl(OH) 4 ) - the major constituents in alkaline nuclear waste. Here, NaOH and NaAl(OH) 4 did not enhance the solubility of NaNO 3 or NaNO 2 , whereas NaNO 2 and NaNO 3 enhanced rather than depressed the solubility of each other despite each having the sodium cation (Na + ) in common. Solutions evaluated in this study have more than 20 molal total Na + concentration, and most have less than one mole of water per mole of ion. Thus, this reversal of the LMA occurs in solutions where there is not enough water to fully hydrate the ions, pointing to the importance of ion cluster formation. Within the composition range of the solutions analyzed here, this reversal of the LMA occurs regardless of NaAl(OH) 4 and NaOH concentrations. Elevated temperatures also result in the reversal of the LMA in the subsystems NaNO 2 -NaNO 3 -H 2 O and NaOH-NaNO 3 -H 2 O, consistent with spectroscopic and computational studies showing enhanced interactions at higher temperatures. Although speciation in these highly concentrated electrolyte solutions is not well understood, the stabilization of ion clusters by: (i) optimizing charge density around the ions through different combinations of mixed cations and anions in solution; and (ii) high temperatures where ions experience prolonged contact, offers important clues for future research into how these species control solubility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Proton-regulated alcohol oxidation for high-capacity ketone-based flow battery anolyte

Redox flow batteries have a unique architecture that potentially enables cost-effective long-duration energy storage to address the intermittency introduced by increased renewable integration for the decarbonization of the electric power sector. Targeted molecular engineering has demonstrated electrochemical reversibility in natively redox-inactive ketone molecules in aqueous electrolytes. Yet, the kinetics of fluorenone-based flow batteries continue to be limited by slow alcohol oxidation. We show how strategically designed proton regulators can accelerate alcohol oxidation and thus enhance battery kinetics. Fluorenone-based flow batteries with the organic additive ß-cyclodextrin demonstrate enhanced rate capability, high capacity, and long cycling. This study opens a new avenue to improve the kinetics of aqueous organic flow batteries by modulating the reaction pathway with a homogeneous catalyst.

25 ENERGY STORAGE↗