Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “antimony”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Thin films of copper antimony sulfide: A photovoltaic absorber material

Highlights: • CuSbS{sub 2} thin films were prepared by heating Sb{sub 2}S{sub 3}/Cu layers. • Analyzed the structure, composition, optical, and electrical properties. • PV structures: glass/SnO{sub 2}:F/n-CdS/p-CuSbS{sub 2}/C/Ag were formed at different conditions. • The PV parameters (J{sub sc}, V{sub oc}, and FF) were evaluated from the J–V characteristics. • J{sub sc}: 0.52–3.20 mA/cm{sup 2}, V{sub oc}:187–323 mV, FF: 0.27–0.48 were obtained. - Abstract: In this work, we report preparation and characterization of CuSbS{sub 2} thin films by heating glass/Sb{sub 2}S{sub 3}/Cu layers and their use as absorber material in photovoltaic structures: glass/SnO{sub 2}:F/n-CdS/p-CuSbS{sub 2}/C/Ag. The Sb{sub 2}S{sub 3} thin films of 600 nm were prepared by chemical bath deposition on which copper thin films of 50 nm were thermally evaporated, and the glass/Sb{sub 2}S{sub 3}/Cu multilayers were heated in vacuum at different temperatures. X-ray diffraction analysis showed the formation of orthorhombic CuSbS{sub 2} after heating the precursor layers. Studies on identification and chemical state of the elements were done using X-ray photoelectron spectroscopy. The optical band gap of the CuSbS{sub 2} thin films was 1.55 eV and the thin films were photoconductive. The photovoltaic parameters of the devices using CuSbS{sub 2} as absorber and CdS as window layer were evaluated from the J–V curves, yielding J{sub sc}, V{sub oc}, and FF values in the range of 0.52–3.20 mA/cm{sup 2}, 187–323 mV, and 0.27–0.48, respectively, under illumination of AM1.5 radiation.

36 MATERIALS SCIENCE↗

Stable bismuth-antimony alloy cathode with a conversion-dissolution/deposition mechanism for high-performance zinc batteries

Although a large number of intercalation cathode materials for aqueous Zn batteries have been reported, limited intercalation capacity precludes achieving a higher energy density. Here, for this work, we develop a high-performance aqueous Zn battery based on BiSb alloy (Bi 0.5 Sb 0.5 ) using a high-concentrated strong-basic polyelectrolyte. We demonstrate that a conversion-dissolution/deposition electrochemical mechanism (BiSb ↔ Bi + SbO 2 – ↔ Bi + SbO 3 – ↔ Bi 2 O 3 ) through in situ X-ray diffraction (XRD), Raman, and ex-situ X-ray photoelectron spectrometry (XPS) characterizations with the help of density functional theory calculations. The BiSb cathode delivers large capacity of 512 mAh g –1 at 0.3 Ag –1 and superior rate capability of 90 mAh g –1 even at 20 Ag –1 , and long-term cyclability with capacity retentions of 184 mAh g –1 after 600 cycles at 0.5 Ag –1 and 130 mAh g –1 after 1300 cycles at 1 Ag –1 . Remarkably, even at temperatures as low as –10 and –20 °C, capacities of 210 and 197 mAh g –1 are reserved at 1 Ag –1 , respectively. Moreover, the prepared pouch Zn//BiSb battery delivers a high energy density of 303 Wh kg –1 BiSb at 0.3 Ag –1 . When coupled with a high concentration polyelectrolyte, the Zn/BiSb battery exhibits an excellent performance over a wide temperature range (–40 to 40 °C). Our research reveals the metal cathode is promising for Zn batteries to achieve a high performance with the unique mechanism and alloys can be an effective approach to stabilize metal electrodes for cycling.

25 ENERGY STORAGE↗

Coupling In Situ TEM and Ex Situ Analysis to Understand Heterogeneous Sodiation of Antimony

Here, we employed an in situ electrochemical cell in the transmission electron microscope (TEM) together with ex situ time-of-flight, secondary-ion mass spectrometry (TOF-SIMS) depth profiling, and FIB–helium ion scanning microscope (HIM) imaging to detail the structural and compositional changes associated with Na/Na+ charging/discharging of 50 and 100 nm thin films of Sb. TOF-SIMS on a partially sodiated 100 nm Sb film gives a Na signal that progressively decreases toward the current collector, indicating that sodiation does not proceed uniformly. This heterogeneity will lead to local volumetric expansion gradients that would in turn serve as a major source of intrinsic stress in the microstructure. In situ TEM shows time-dependent buckling and localized separation of the sodiated films from their TiN-Ge nanowire support, which is a mechanism of stress-relaxation. Localized horizontal fracture does not occur directly at the interface, but rather at a short distance away within the bulk of the Sb. HIM images of FIB cross sections taken from sodiated half-cells, electrically disconnected, and aged at room temperature, demonstrate nonuniform film swelling and the onset of analogous through-bulk separation. TOF-SIMS highlights time-dependent segregation of Na within the structure, both to the film-current collector interface and to the film surface where a solid electrolyte interphase (SEI) exists, agreeing with the electrochemical impedance results that show time-dependent increase of the films’ charge transfer resistance. We propose that Na segregation serves as a secondary source of stress relief, which occurs over somewhat longer time scales.

25 ENERGY STORAGE↗

Interpreting Electrochemical and Chemical Sodiation Mechanisms and Kinetics in Tin Antimony Battery Anodes Using in Situ Transmission Electron Microscopy and Computational Methods

Intermetallic compounds such as SnSb are promising anode materials for sodium ion batteries; however, their nanoscale sodiation mechanisms are not well understood. Here, we used a combination of in situ transmission electron microscopy (TEM), first-principles electronic structure calculations, computational thermodynamic modeling, and phase-field simulations to reveal the sodiation mechanisms and to quantify microstructural effects contributing to the underlying reaction kinetics in SnSb electrodes. During in situ sodiation experiments, the nanocrystalline SnSb thin films underwent a rapid amorphous phase transformation upon sodiation, as determined by in situ TEM and electron diffraction experiments. The Na + diffusion coefficients were measured with and without an external electrical bias, and the data showed that an applied potential increased Na + diffusion by an order of magnitude compared to solid-state diffusion. Furthermore, there was a distinct decrease in sodium diffusion upon the formation of the amorphous phase that resulted from a change in the local structure and grain boundaries. To further understand how the Na + transport mechanism correlated with the changes observed in the SnSb thin films, phase-field modeling was used, which considered sodium diffusion within the grain boundaries together with their evolution and stress–strain state. As a result, these findings enhance our understanding of sodiation mechanisms within intermetallic anode materials for sodium ion battery applications.

25 ENERGY STORAGE↗

Antimony(III) Sulfide Thin Films as a Photoanode Material in Photocatalytic Water Splitting

Here, we introduce exploratory investigations on the performance of thermally evaporated Sb 2 S 3 thin film photoanodes for solar-assisted water splitting applications. With a bandgap of 1.72 eV, a 250 nm thick Sb 2 S 3 photoanode showed a saturation photocurrent density of ~600 µA cm -2 measured at 1.0 V vs. reversible hydrogen electrode (RHE) in 0.1 M Na 2 SO 4 under 1-sun illumination, with an onset potential of ~0.25 V vs. RHE. However, subsequent photodegradation studies revealed that the material dissolves relatively quickly with the application of both illumination and bias. Nonetheless, Sb 2 S 3 does have the advantage of having a relatively low optimal fabrication temperature of 300 °C and thus may have utility as a top cell absorber of a tandem device where the bottom cell is temperature sensitive, if protected from corrosion. Thus, we characterized relevant aspects of the material in an attempt to explain the large difference between the theoretical maximum and measured current density. From our characterization it is believed that the photocatalytic efficiency of this material can be improved by modifying the surface to reduce optical reflection and addressing inherent issues such as high electrical resistivity and surface defects.

36 MATERIALS SCIENCE↗

Durian-Inspired Design of Bismuth–Antimony Alloy Arrays for Robust Sodium Storage

Sodium-ion batteries have attracted widespread attention for cost-effective and large-scale electric energy storage. However, their practical deployment has been largely retarded by the lack of choice of efficient anode materials featuring large capacity and electrochemical stability and robustness. Herein, we report a durian-inspired design and template-free fabrication of a robust sodium anode based on triangular pyramid arrays of Bi 0.75 Sb 0.25 alloy electrodeposited on Cu substrates. The Bi 0.75 Sb 0.25 arrays exhibit an appreciable electrochemical robustness for sodium storage, sustaining a reversible capability 335 mAh g –1 at a high rate of 2.5 A g –1 and 87% of the initial capacity over 2000 cycles. We further demonstrate the applicability of the Bi 0.75 Sb 0.25 array anode in sodium full cells by pairing it with a Na 3 V 2 (PO 4 ) 3 /C cathode. This full cell achieves a high specific energy of 203 Wh kg –1 (based on both active electrodes). Such an enhanced performance is attributed to the thorny-durian-like architecture and bimetallic alloy composition. In conclusion, the pyramid tip induces ion enrichment for rapid charge-transfer reaction, while the alloy design reduces the electrode volume swelling for stable Na cycling.

25 ENERGY STORAGE↗

Optical properties of antimony-doped p-type ZnO films fabricated by pulsed laser deposition

We investigated optical properties of Sb-doped p-type ZnO films grown on n-Si (100) substrates by oxygen plasma-assisted pulsed laser deposition. Two acceptor states, with the acceptor levels of 161 and 336 meV, are identified by well-resolved photoluminescence spectra. Under oxygen-rich conditions, the deep acceptor in Sb-doped ZnO film is Zn vacancy. The shallow acceptor is Sb{sub Zn}-2V{sub Zn} complex induced by Sb doping. The origin of p-type behavior in Sb-doped ZnO has been ascribed to the formation of Sb{sub Zn}-2V{sub Zn} complex.

36 MATERIALS SCIENCE↗

High-level incorporation of antimony in germanium by laser annealing

In this work we investigate pulse laser annealing as an alternative approach to reach high-level incorporation of Sb in substitutional location in crystalline germanium. Laser irradiation is demonstrated to recover also those structural defects, like honeycomb structures, that form during high-fluence heavy-ion implantations in Ge and that cannot be eliminated by conventional thermal treatments. Indeed, concentrations of substitutional Sb higher than 1x10{sup 21} at./cm{sup 3} have been obtained, well above the solid solubility of Sb in Ge. The strain induced on the Ge host lattice is also investigated, evidencing that the obtained Sb doped Ge layer is pseudomorphic to the Ge substrate while positively strained by the substitutional Sb atoms present within the Ge matrix. The kinetics of this Sb-rich Ge alloy phase is finally investigated, showing that most of Sb goes out of lattice with increasing the annealing temperature up to 488 deg. C, leading to a decrease in the related lattice deformation. These results are very relevant for the future high-mobility channel technology.

36 MATERIALS SCIENCE↗

Near-surface depletion of antimony during the growth of GaAsSb and GaAs/GaAsSb nanowires

The near-surface reduction of the Sb mole fraction during the growth of GaAsSb nanowires (NWs) and GaAs NWs with GaAsSb inserts has been studied using quantitative high-angle annular dark field scanning transmission electron microscopy (STEM). A model for diffusion of Sb in the hexagonal NWs was developed and employed in combination with the quantitative STEM analysis. GaAsSb NWs grown by Ga-assisted molecular beam epitaxy (MBE) and GaAs/GaAsSb NWs grown by Ga- and Au-assisted MBE were investigated. At the high temperatures employed in the NW growth, As-Sb exchange at and outward diffusion of Sb towards the surface take place, resulting in reduction of the Sb concentration at and near the surface in the GaAsSb NWs and the GaAsSb inserts. In GaAsSb NWs, an increasing near-surface depletion of Sb was observed towards the bottom of the NW due to longer exposure to the As beam flux. In GaAsSb inserts, an increasing change in the Sb concentration profile was observed with increasing post-insert axial GaAs growth time, resulting from a combined effect of radial GaAs overgrowth and diffusion of Sb. The effect of growth temperature on the diffusion of Sb in the GaAsSb inserts was identified. The consequences of these findings for growth optimization and the optoelectronic properties of GaAsSb are discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effects of antimony (Sb) on electron trapping near SiO{sub 2}/4H-SiC interfaces

To investigate the mechanism by which Sb at the SiO{sub 2}/SiC interface improves the channel mobility of 4H-SiC MOSFETs, 1 MHz capacitance measurements and constant capacitance deep level transient spectroscopy (CCDLTS) measurements were performed on Sb-implanted 4H-SiC MOS capacitors. The measurements reveal a significant concentration of Sb donors near the SiO{sub 2}/SiC interface. Two Sb donor related CCDLTS peaks corresponding to shallow energy levels in SiC were observed close to the SiO{sub 2}/SiC interface. Furthermore, CCDLTS measurements show that the same type of near-interface traps found in conventional dry oxide or NO-annealed capacitors are present in the Sb implanted samples. These are O1 traps, suggested to be carbon dimers substituted for O dimers in SiO{sub 2}, and O2 traps, suggested to be interstitial Si in SiO{sub 2}. However, electron trapping is reduced by a factor of ∼2 in Sb-implanted samples compared with samples with no Sb, primarily at energy levels within 0.2 eV of the SiC conduction band edge. This trap passivation effect is relatively small compared with the Sb-induced counter-doping effect on the MOSFET channel surface, which results in improved channel transport.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Aperiodic normal-incidence antimony-based multilayer mirrors in the 8 - 13-nm spectral range

The optical properties of several materials were analysed from the standpoint of fabrication of broadband normal-incidence multilayer mirrors possessing maximal uniform reflectivity in the 8-13-nm range. By solving the inverse problem of multilayer optics we show that aperiodic Sb/(B{sub 4}C, Sc, Si) multilayer structures optimised for maximum uniform reflectivity in the 8-13-nm range are able to afford a normal-incidence reflectivity R{approx}10 % throughout this range. The best results are exhibited by the pair Sb/B{sub 4}C, for which the average reflection coefficient amounts to about 13%. The dependence of optimisation result on the programmable limitation on the minimal layer thickness in the multilayer structure was numerically investigated. An empirical rule was established whereby setting the lower bound for a layer thickness at a level {approx}{lambda}{sub min}/4 (in this case, {lambda}{sub min} = 8 nm) does not result in an appreciable lowering of attainable uniform reflectivity. (quantum electronic devices)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface Phase Diagram and Alloy Formation for Antimony on Au(110)

The authors have evaporated submonolayer to monolayer Sb films on the clean Au(110) surface and investigated the resultant Sb-induced reconstructions using low energy electron diffraction, x-ray photoelectron spectroscopy, Auger electron spectroscopy, and surface x-ray diffraction. They discovered a sequence of reconstructions, namely, c(2x2), (sqrt(3)xsqrt(3))R54.7 , (((2 - 1)/(1 2))), and p(5x6), with increasing coverage of Sb. The well-known (2x1) reconstruction of the clean Au(110) surface changes to c(2x2) at an Sb coverage of theta[approximate]0.5 ML. At higher Sb coverages, there is a phase transition from c(2x2) to (sqrt(3)xsqrt(3))R54.7 , with the (sqrt(3)xsqrt(3))R54.7 pattern emerging at an Sb coverage of theta[approximate]0.7 ML. Upon further deposition, the superstructure spots of the (sqrt(3)xsqrt(3))R54.7 reconstruction each split into two, resulting in the (((2 - 1)/(1 2))) pattern at a coverage of theta[approximate]0.8 ML. Finally, an Sb/Au(110)-p(5x6) reconstruction emerges at coverages in excess of 1 ML. They have also studied the temperature dependence of the c(2x2) surface phase.

36 MATERIALS SCIENCE↗

On the effect of structural and symmetrical features of potassium titanyl phosphate crystals with different contents of niobium, antimony, and zirconium on the second-harmonic intensity

A model is proposed, which shows that, at small deviations from the centrosymmetric state of the atomic structure, the quadratic nonlinear susceptibility of a crystal monotonically decreases with approach of the degree of central symmetry {eta} {sub 1}[{phi}(r)] of the electric potential function of the crystal structure to unity. The quadratic nonlinear susceptibility of K{sub 1-x}Ti{sub 1-x}Nb{sub x}OPO{sub 4} (x = 0, 0.02, 0.04, 0.11), K{sub 1} {sub -x}Ti{sub 1-x}Sb{sub x}OPO{sub 4} (x = 0.01, 0.07, 0.17), and KTi{sub 1-x}Zr{sub x}OPO{sub 4} (x = 0.03, 0.04) crystals has been measured. The degree of central symmetry {eta} {sub 1}[{phi}(r)] has been calculated for the structures of K{sub 1-x}Ti{sub 1-x}Nb{sub x}OPO{sub 4} (x = 0, 0.04, 0.11), K{sub 1-x}Ti{sub 1-x}Sb{sub x}OPO{sub 4} (x = 0.01, 0.07, 0.17), and KTi{sub 1} {sub -x}Zr{sub x}OPO{sub 4} (x = 0.03, 0.04) crystals. It is shown that, at {eta} {sub 1}[{phi}(r)] > 0.7, the relationship between the quadratic nonlinear susceptibility of the investigated crystals and the degree of their central symmetry {eta} {sub 1}[{phi}(r)] is in qualitative agreement with the proposed model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-resolution X-ray diffraction studies of the GaAs structures grown at a low temperature and periodically {delta}-doped with antimony and phosphorus

High-resolution X-ray diffractometry is used to study the GaAs structures grown at a low temperature (LT-GaAs) by molecular beam epitaxy. The feature of the studied structures is the presence of thin (about 1 monolayer) layers {delta}-doped with isovalent Sb and P impurities and formed at a low epitaxial temperature. The {delta}-doped layers periodically arranged in the bulk of the epitaxial film form the X-ray diffraction pattern containing a large number of interference peaks, whose quantitative analysis allows one to extract the information on the thickness, chemical composition, and abruptness of layer boundaries. Such an analysis was performed before and after annealing of the studied samples, and this annealing gives rise to a system of As nanoinclusions (quantum dots) in the bulk of the epitaxial film. The variations in the parameters of diffraction curves that characterize the process of formation of the As quantum dots are revealed. It is established that the formation of the system of As quantum dots in LT-GaAs ({delta}-Sb) causes enhanced damping of super-lattice satellite peaks, which is probably associated with an increase in the roughness and diffusion spreading of the layers {delta}-doped with Sb. A similar phenomenon was not observed in LT-GaAs ({delta}-P), which is most probably caused by the absence of heterogeneous precipitation of As in the layers {delta}-doped with P and lower effective coefficients of diffusion intermixing As-P compared with As-Sb. For the samples with a combined system of the layers {delta}-doped with Sb and P, the diffraction curves quantitatively confirmed the formation of superlattices containing the system of As quantum dots, in which the mismatch with respect to the GaAs substrate by the average lattice parameter is less than 0.0001%.

36 MATERIALS SCIENCE↗

Materials Based on Solid Solutions of Bismuth and Antimony Tellurides Formed by Rapid Melt Crystallization Methods

p-type Bi 0.5 Sb 1.5 Te 3 solid solutions prepared by hot pressing and the extrusion of powders prepared by rapid melt crystallization methods such as melt spinning and melt crystallization in a liquid are investigated. The morphology of the powders, the sample cleavage surface, and their microstructure are investigated using optical microscopy, scanning electron microscopy, and scanning tunneling microscopy. The mechanical properties of the samples are investigated by room-temperature compression tests. The Seebeck coefficient, electrical conductivity, and thermal conductivity of the materials are measured in the temperature range of 100–600 K. The highest limiting compressive strength σ B = 145 MPa at 300 K and maximal thermoelectric efficiency (ZT) max = 1.34 at 370 K are found for materials extruded from granules prepared by melt crystallization in water and ground in a ball mill.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Shape Effect in Layering of Solid Solutions in Small Volume: Bismuth–Antimony Alloy

The regularities of the effect of the shape of interphase boundaries in small volume systems on the separation of solutions with an upper critical solution temperature (UCST) are described by the example of Bi–Sb alloy particles with a core–shell configuration. The change in the shape of interphase boundaries is simulated in general by introducing a parameter corresponding to the degree of deviation of the shape of the boundaries from the spherical one. An analysis of the extrema of the Gibbs function revealed regularities in the effect of the shape of the core and shell phases on phase equilibria, the thermodynamic stability of heterogeneous states, and the phase separation diagram. The deviation of the shape of the interphase boundaries from the spherical shape changes the UCST and the mutual solubility of the components. The deformation of the shell of a core–shell particle increases the thermodynamic stability of the heterogeneous state, which contributes to the separation of the solution. The deformation of the core lowers the thermodynamic stability of the heterogeneous state and expands the range of metastable states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗