Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “angular deformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Spin oscillations of the normal polarized Fermi gas at unitarity

Using density-functional theory in a time-dependent approach, we determine the frequencies of the compressional modes of the normal phase of a Fermi gas at unitarity as a function of its polarization. Our energy functional accounts for the typical elastic deformations exhibited by Landau theory of Fermi liquids. The comparison with the available experiments is biased by important collisional effects affecting both the in-phase and the out-of-phase oscillations even at the lowest temperatures. New experiments in the collisionless regime would provide a crucial test of the applicability of Landau theory to the dynamics of these strongly interacting normal Fermi gases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Superdeformed oblate superheavy nuclei

We study stability of superdeformed oblate (SDO) superheavy Z{>=}120 nuclei predicted by systematic microscopic-macroscopic calculations in 12D deformation space and confirmed by the Hartree-Fock calculations with the SLy6 force. We include into consideration high-K isomers that very likely form at the SDO shape. Although half-lives T{sub 1/2} < or approx. 10{sup -5} s are calculated or estimated for even-even spin-zero systems, decay hindrances known for high-K isomers suggest that some SDO superheavy nuclei may be detectable by the present experimental technique.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Formulating the interacting boson model by mean-field methods

The interacting boson model (IBM) Hamiltonian is determined microscopically for general cases of low-lying quadrupole collectivity. Under the assumption that the multinucleon-induced surface deformations, which reflect nuclear forces and the Pauli principle, can be simulated by bosons, the interaction strengths of the IBM Hamiltonian are derived by mapping the potential energy surface of the mean-field model with Skyrme force onto the corresponding one of the IBM. These interaction strengths turn out to change gradually as functions of valence nucleon numbers. The energy eigenvalues and the wave functions are calculated with the exact treatment of the particle number and the angular momentum. We demonstrate how well the method works by taking Sm isotopes as an example, where a typical spherical-deformed shape-phase transition is reproduced successfully. We show that the physically relevant IBM interaction strengths can be determined unambiguously by the use of wavelet analysis. In addition, by the diagonalization of the boson Hamiltonian, quantum-mechanical correlation effects can be included in the eigenenergies, by which the basic properties of these nuclei are properly reproduced. The present method is applied to several other isotopic chains, Ba, Xe, Ru, Pd, W, and Os, in comparison to the experimental data. We point out the relevance of our results to the recently proposed critical-point symmetries. The predicted spectra and the B(E2) ratios are presented for heavy neutron-rich exotic nuclei in experimentally unexplored regions such as the right-lower corner of {sup 208}Pb on the nuclear chart.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Neutron one-quasiparticle states in {sup 251}Fm{sub 151} populated via the {alpha} decay of {sup 255}No

Excited states in {sup 251}Fm populated via the {alpha} decay of {sup 255}No are studied in detail through {alpha}-{gamma} coincidence and {alpha} fine-structure measurements. Five excited states reported previously in {sup 251}Fm are firmly established through the {alpha}-{gamma} coincidence measurement, and rotational bands built on one-quasiparticle states are newly established through the {alpha} fine-structure measurement. Spin-parities and neutron configurations of the excited states in {sup 251}Fm as well as the ground state of {sup 255}No are definitely identified on the basis of deduced internal conversion coefficients, lifetimes of {gamma} transitions, rotational-band energies built on one-quasiparticle states, and hindrance factors of {alpha} transitions. It is found that the excitation energy of the 1/2{sup +}[620] state in N=151 isotones increases with the atomic number, especially at Z{>=}100, while that of the 1/2{sup +}[631] state decreases at Z=100. Ground-state deformations and energies of neutron one-quasiparticle states in the N=151 isotones are calculated using a macroscopic-microscopic model, and the energy systematics of the one-quasiparticle states in the isotones are discussed in terms of the evolution of nuclear deformation involving the hexadecapole ({beta}{sub 4}) and hexacontatetrapole ({beta}{sub 6}) deformations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Toroidal high-spin isomers in the nucleus 120 304

Strongly deformed oblate superheavy nuclei form an intriguing region where the toroidal nuclear structures may bifurcate from the oblate spheroidal shape. The bifurcation may be facilitated when the nucleus is endowed with a large angular moment about the symmetry axis with $I=I_{z}$. The toroidal high-$K$ isomeric states at their local energy minima can be theoretically predicted using the cranked self-consistent Skyrme-Hartree-Fock method. We use the cranked Skyrme-Hartree-Fock method to predict the properties of the toroidal high-spin isomers in the superheavy nucleus $^{304}{120}_{184}$. This method consists of three steps: first, we use the deformation-constrained Skyrme-Hartree-Fock-Bogoliubov approach to search for the nuclear density distributions with toroidal shapes. Next, using these toroidal distributions as starting configurations we apply an additional cranking constraint of a large angular momentum $I=I_{z}$ about the symmetry $z$-axis and search for the energy minima of the system as a function of the deformation. In the last step, if a local energy minimum with $I=I_{z}$ is found, we perform at this point the cranked symmetry- and deformation-unconstrained Skyrme-Hartree-Fock calculations to locate a stable toroidal high-spin isomeric state in free convergence. Furthemore, we have theoretically located two toroidal high-spin isomeric states of $^{304}{120}_{184}$ with an angular momentum $I$=$I_z$=81$\hbar$ (proton 2p-2h, neutron 4p-4h excitation) and $I$=$I_z$=208$\hbar$ (proton 5p-5h, neutron 8p-8h) at the quadrupole moment deformations $Q_{20}=-297.7$~b and $Q_{20}=-300.8$~b with energies 79.2 MeV and 101.6 MeV above the spherical ground state, respectively. The nuclear density distributions of the toroidal high-spin isomers $^{304}{120}_{184}(I_z$=81$\hbar$ and 208$\hbar$) have the maximum density close to the nuclear matter density, 0.16 fm$^{-3}$, and a torus major to minor radius aspect ratio $R/d=3.25$. Here, we demonstrate that aligned angular momenta of $I_z$=81$\hbar$ and 208$\hbar$ arising from multi-particle-multi-hole excitations in the toroidal system of $^{304}{120}_{184}$ can lead to high-spin isomeric states, even though the toroidal shape of $^{304}120_{184}$ without spin is unstable. Toroidal energy minima without spin may be possible for superheavy nuclei with higher atomic numbers, $Z\gtrsim$122, as reported previously [A. Staszczak and C. Y. Wong,Acta Phys. Pol. B 40 , 753 (2008)].

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Systematic calculation of {alpha} decay within a generalized density-dependent cluster model

We perform an extensive investigation on {alpha} decays in both even-A and odd-A nuclei within the new version of the generalized density-dependent cluster model. The microscopic deformed potential is numerically constructed in the double-folding model by the multipole expansion method. The coupled-channel effect resulting from nuclear deformation is included by using the coupled-channel Schroedinger equation with outgoing wave boundary conditions. The fine structure observed in {alpha} decay is well described by taking into account the angular momentum of the emitted {alpha} particle and the Boltzmann distribution of excitation spectrum in daughter nuclei. A good agreement between experiment and theory is achieved, and the results of our calculations are discussed in detail, together with the sensitivity of the calculated half-lives and branching ratios to some physical quantities used in the calculations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Deformed shell effects in Ca 48 + Bk 249 quasifission fragments

Background: Quasifission is the main reaction channel hindering the formation of superheavy nuclei (SHN). Its understanding will help to optimize entrance channels for SHN studies. Quasifission also provides a probe to understand the influence of shell effects in the formation of the fragments. Purpose: Investigate the role of shell effects in quasifission and their interplay with the orientation of the deformed target in the entrance channel. Methods: 48 Ca + 249 Bk collisions are studied with the time-dependent Hartree-Fock approach for a range of angular momenta and orientations. Results: Unlike similar reactions with a 238 U target, no significant shell effects which could be attributed to the 208 Pb “doubly magic” nucleus are found. However, the octupole deformed shell gap at N = 56 seems to strongly influence quasifission in the most-central collisions. Conclusions: Shell effects similar to those observed in fission affect the formation of quasifission fragments. Mass-angle correlations could be used to experimentally isolate the fragments influenced by N = 56 octupole shell gaps.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Momentum in single-trace $T$$\overline{T}$ holography

We continue our exploration of the holographic duality between string theory in backgrounds that interpolate between asymptotically linear dilaton spacetime in the UV and AdS 3 in the IR, and the corresponding boundary theories. In previous papers, [1], [2], we showed that states in the bulk theory that are described by non-trivial asymptotically linear dilaton geometries, such as black holes and deformed global AdS 3 , can be described in the boundary theory by a single-trace $T$$\overline{T}$ deformation of a symmetric product theory. In those papers, we restricted to states with vanishing (angular) momentum; in this paper, we extend the analysis to states with arbitrary momentum, and show that the picture presented in the earlier papers generalizes to this case.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A comprehensive investigation of the strengthening effects of dislocations, texture and low and high angle grain boundaries in ultrafine grained AA6063 aluminum alloy

Highlights: • Evolution of microstructure and mechanical properties of AA6063 after severe plastic deformation was investigated. • Average cell size shows a more solid relationship with mechanical properties rather than the average grain size. • This indicates that in addition to high angle boundaries, cell boundaries play a strengthening role. - Abstract: The effect of equal channel angular pressing (ECAP) on the microstructure and mechanical properties of AA6063 aluminum alloy was investigated. For this purpose, samples of AA6063 aluminum alloy were deformed up to 10 passes using ECAP and the evolution of microstructure, texture and dislocation density was investigated. It was found that the dislocation density increased and cells mostly surrounded by low angle boundaries (LABs) formed after 2 passes ECAP. Increasing the dislocation density continued with further processing and reached a maximum at the 4th ECAP pass. With further deformation to 6 passes, the dislocation density reduced, the fraction of high angle boundaries (HABs) increased and the averages of cell size and grain size reduced, significantly, which indicated the occurrence of grain refinement. However, a slight increase in dislocation density, average cell size (ACS) and average grain size (AGS), indicating coarsening, occurred when 10 passes of ECAP are imposed. Hardness, yield (YS) and ultimate tensile strength (UTS) increased continuously although the most significant enhancement occurred after 2 passes of ECAP. Investigating the correlation between the microstructure and mechanical properties indicated that Hall-Petch relationship was valid for ultrafine grained AA6063 before the coarsening started provided that the property of interest was correlated to average cell size but not the average grain size.

36 MATERIALS SCIENCE↗

The influence of the Jahn-Teller effect at Fe 2+ on the structure of chromite at high pressure

The crystal structure of chromite FeCr 2 O 4 was investigated to 13.7 GPa and ambient temperature with single-crystal X-ray diffraction techniques. The unit-cell parameter decreases continuously from 8.3832 (5) to 8.2398 (11) Å up to 11.8 GPa. A fit to the Birch-Murnaghan equation of state (EoS) based on the P-V data gives: K 0 = 209 (13) GPa, K' = 4.0 (fixed), and V 0 = 588 (1) Å 3 . The FeO 4 tetrahedra and CrO 6 octahedra are compressed isotropically with pressure with their Fe-O and Cr-O bond distances decreasing from 1.996 (6) to 1.949 (7) Å and from 1.997 (3) to 1.969 (7) Å, respectively. The tetrahedral site occupied by the Fe 2+ cation is more compressible than the octahedral site occupied by the Cr 3+ cation. The resulting EoS parameters for the tetrahedral and the octahedral sites are K 0 = 147 (9) GPa, K' = 4.0 (fixed), V 0 = 4.07 (1) Å 3 and K 0 = 275 (24) GPa, K' = 4.0 (fixed), V 0 = 10.42 (2) Å 3 , respectively. A discontinuous volume change is observed between 11.8 and 12.6 GPa. This change indicates a phase transition from a cubic (space group Fd-3 – m) to a tetragonal structure (space group I4 1 /amd). At the phase transition boundary, the two Cr-O bonds parallel to the c-axis shorten from 1.969 (7) to 1.922 (17) Å and the other four Cr-O bonds parallel to the ab plane elongate from 1.969 (7) to 1.987 (9) Å. This anisotropic deformation of the octahedra leads to tetragonal compression of the unit cell along the c-axis. The angular distortion in the octahedron decreases continuously up to 13.7 GPa, whereas the distortion in the tetrahedron rises dramatically after the phase transition. At the pressure of the phase transition, the tetrahedral bond angles along the c-axis direction of the unit cell begin decreasing from 109.5 o to 106.6 (7) o , which generates a 'stretched' tetrahedral geometry. It is proposed that the Jahn-Teller effect at the tetrahedrally coordinated Fe 2+ cation becomes active with compression and gives rise to the tetrahedral angular distortion, which in turn induces the cubic-to-tetragonal transition. A qualitative molecular orbital model is proposed to explain the origin and nature of the Jahn-Teller effect observed in this structure and its role in the pressure-induced phase transition.

74 ATOMIC AND MOLECULAR PHYSICS↗

Evaluating the Material Point Method in CTH Using the Method of Manufactured Solutions

The Method of Manufactured Solutions (MMS) is used to evaluate the Material Point Method (MPM) implemented in CTH, i.e. Markers. MMS is a verification approach in which a desired deformation field is prescribed and the required forcing function to achieve the prescribed deformation is determined analytically. The calculated forcing function is applied within CTH markers determine if the correct displacement field is recovered. For the cases examined in this study, a ring is subjected to a finite, angular-independent, spatially varying body force, superposed with a rigid-body rotation. This test will assess the solid mechanics response of the MPM within CTH for large deformation problems.

36 MATERIALS SCIENCE↗

Evaluating the Material Point Method in CTH Using the Method of Manufactured Solutions

The Method of Manufactured Solutions (MMS) is used to evaluate the Material Point Method (MPM) implemented in CTH, i.e. Markers. MMS is a verification approach in which a desired deformation field is prescribed and the required forcing function to achieve the prescribed deformation is determined analytically. The calculated forcing function is applied within CTH markers determine if the correct displacement field is recovered. For the cases examined in this study, a ring is subjected to a finite, angular-independent, spatially varying body force, superposed with a rigid-body rotation. This test will assess the solid mechanics response of the MPM within CTH for large deformation problems. This page intentionally left blank.

36 MATERIALS SCIENCE↗

Chirality in odd-A Rh isotopes within the triaxial particle rotor model

By adopting the fully quantal triaxial particle-rotor model, the candidate chiral doublet bands in odd-A nuclei {sup 103}Rh and {sup 105}Rh with {pi}g{sub 9/2}{sup -1} x {nu}h{sub 11/2}{sup 2} configuration are studied. For the doublet bands in both nuclei, agreement is excellent for the observed energies over the entire spin range and B(M1)/B(E2) at higher spin range. The evolution of the chiral geometry with angular momentum is discussed in detail by using the angular momentum components and their probability distributions. Chirality is found to change from chiral vibration to nearly static chirality at spin I=37/2 and back to another type of chiral vibration at higher spin. The influence of the triaxial deformation {gamma} is also studied.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Tidal effects for spinning particles

Expanding on the recent derivation of tidal actions for scalar particles, we present here the action for a tidally deformed spin-1 / 2 particle. Focusing on operators containing two powers of the Weyl tensor, we combine the Hilbert series with an on-shell amplitude basis to construct the tidal action. With the tidal action in hand, we compute the leading-post-Minkowskian tidal contributions to the spin-1/2–spin-1/2 amplitude, arising at $\mathcal{O}$( G 2 ). Our amplitudes provide evidence that the observed long range spin-universality for the scattering of two point particles extends to the scattering of tidally deformed objects. From the scattering amplitude we find the conservative two-body Hamiltonian, linear and angular impulses, eikonal phase, spin kick, and aligned-spin scattering angle. We present analogous results in the electromagnetic case along the way.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Optimizing the equal channel angular pressing process (ECAP) operation parameters to produce bulk nanostructure materials

In this work we were interested in doing simulation using finite elements analysis (FEA) to study the equal channel angular pressing process (ECAP), which is currently one of the most popular methods of severe plastic deformation Processes (SPD). for fabricating Ultra-Fine Grained (UFG) materials, because it allows very high strains to be imposed leading to extreme work hardening and microstructural refinement. The main object of this study is to establish the influence of main parameters which effect ECAP process which are magnitude of the die angle and the friction coefficient. The angle studied between (90-135°) degree, and magnitude of the friction coefficient μ between (0.12-0.6), and number of pass. The samples were made from aluminum alloy at room temperature with (15X 15) mm cross section and 150 mm length. The simulation result shows that normal elastic strain, shears elastic strain, and max. shear elastic strain increased, when changing the angle from 90° to 100°. and decrease between the angle 110° to 135°. Also the total deformation increased when we change die angle from 90° to 135°. By studding the friction effect on the die and sample we noted that increasing the friction coefficient from 0.12 to 0.6, normal elastic strain, and shear elastic strain increased and increasing the friction coefficient from 0.1 to 0.6 decrease the normal and shear stress.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Drift orbit islands of energetic particles due to 3D fields in ITER

In this study, we report a comparative study of the orbit islands formed by the guiding center drift motion of test energetic particles (EPs), including both high-energy deuterium ions and fusion-born α-particles, with respect to the magnetic islands formed by tracing the field lines, for an ITER plasma representing the 15 MA baseline scenario. The particle drift orbit is modified by the presence of static resonant magnetic perturbations (RMPs) of different toroidal mode numbers n (n = 1 and 3 in this study), forming orbit islands in the Poincaré plane by passing EPs. The key findings are as follows. (i) With an n = 1 RMP field, the size of the orbit islands combined with the total RMP field, including the plasma response, is about three times smaller than that obtained by assuming the corresponding vacuum field. (ii) The orbit island size is not sensitive to the EP energy, and is comparable to those of the magnetic islands. (iii) Passing EPs with outward radial orbital drift form orbit islands that shift inward with respect to the corresponding magnetic islands, and vice versa. This radial shift, ΔΨ, measured in the normalized equilibrium poloidal flux, is quantified as ΔΨ ≃ 0.03X for the ITER baseline plasma and assuming n = 1 RMPs, with $X\equiv {(M/{M}_{\mathrm{p}})}^{1/2}{(E[\mathrm{M}\mathrm{e}\mathrm{V}])}^{1/2}{Z}^{-1}$, where M is the particle mass, Mp is the proton mass, E is the particle energy, and Z is the particle charge number. (iv) Trapped EPs do not form drift orbit islands, even in the presence of the 3D fields produced by the 90 kAt ELM control coil current in ITER, and thus possess good confinement properties. Nevertheless, the deformation of the trapped particle drift orbits in the Poincaré plane shows that the canonical toroidal angular momentum of EPs is no longer conserved in the presence of the RMP fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Non-Abelian Effects on D-Branes

We review different non-Abelian configurations of D-branes. We then extend the Myers dielectric effect to configurations with angular momentum. The resulting time-dependent N D0-brane bound states can be interpreted as describing rotating fuzzy ellipsoids. A similar solution exists also in the presence of a RR magnetic field, that we study in detail. We show that, for any finite N, above a certain critical angular momentum it is energetically more favorable for the bound state system to dissociate into an Abelian configuration of N D0-branes moving independently. We further study D-string configurations representing fuzzy funnels deformed by the magnetic field and by the rotational motion.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Microstructure, microtexture and precipitation in the ultrafine-grained surface layer of an Al-Zn-Mg-Cu alloy processed by sliding friction treatment

Precipitate redistribution and texture evolution are usually two concurrent aspects accompanying grain refinement induced by various surface treatment. However, the detailed precipitate redistribution characteristics and process, as well as crystallographic texture in the surface refined grain layer, are still far from full understanding. In this study, we focused on the microstructural and crystallographic features of the sliding friction treatment (SFT) induced surface deformation layer in a 7050 aluminum alloy. With the combination of transmission electron microscopy (TEM) and high angle angular dark field scanning TEM (HAADF-STEM) observations, a surface ultrafine grain (UFG) layer composed of both equiaxed and lamellar ultrafine grains and decorated by high density of coarse grain boundary precipitates (GBPs) were revealed. Further precession electron diffraction (PED) assisted orientation mapping unraveled that high angle grain boundaries rather than low angle grain boundaries are the most favorable nucleation sites for GBPs. The prominent precipitate redistribution can be divided into three successive and interrelated stages, i.e. the mechanically induced precipitate dissolution, solute diffusion and reprecipitation. The quantitative prediction based on pipe diffusion along dislocations and grain boundary diffusion proved the distribution feasibility of GBPs around UFGs. Based on PED and electron backscatter diffraction (EBSD) analyses, the crystallographic texture of the surface UFG layer was identified as a shear texture composed of major rotated cube texture (001) 〈110〉 and minor (111) 〈112〉, while that of the adjoining lamellar coarse grained matrix was pure brass. The SFT induced surface severe shear deformation is responsible for texture evolution. - Highlights: •The surface ultrafine grain layer in a 7050 aluminum alloy was focused. •Precipitate redistribution and texture evolution were discussed. •The quantitative prediction proved the distribution feasibility of GBPs. •Precession electron diffraction orientation mapping showed a shear texture.

36 MATERIALS SCIENCE↗