Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Yield Prediction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Modeling the Effects of a Backward-Facing Step on Boundary-Layer Transition

We model transition to turbulence in a two-dimensional boundary layer downstream of a backward-facing step (BFS) along a flat plate. With the goal of evaluating the available engineering models for predicting the effects of step excrescences on the transition characteristics, two separate methodologies are used to monitor the streamwise shift in the transition onset location as the step height and the flow speed are varied across the range of a previously reported experiment involving step-height-to-local-displacement-thickness ratios of 0 < h/δ* < 1.6. Unlike the variable N -factor method from the previous literature, both of these methods are general in scope and do not involve any empirical correlations that are specific to step excrescences. The first of these techniques involves an N -factor method that directly accounts for the change in boundary-layer instability characteristics due to the step. Stability computations using the harmonic linearized Navier-Stokes equations (HLNSE), which fully account for the nonparallel-mean-flow effects close to the BFS, indicate that the measured transition locations at nearly all test conditions ( h/δ* < 1.3) correlate well with a computed N -factor of N tr = 7.6, demonstrating a successful stability-based transition criterion related to step excrescences. Linear stability theory, which does not account for nonparallel effects, demonstrates reasonable agreement with the HLNSE results, yielding good predictions for the overall trends, but predicts a somewhat earlier onset of transition than HLNSE. The other methodology used in this work involves transport-equation-based transition models. We first show that the Langtry-Menter y - Re θt transition model cannot accurately predict the location of transition onset for moderate BFS heights because it is unable to accurately account for the flow history effects. Along with the Langtry-Menter transition model, we also show the amplification factor transport model does not produce accurate transition locations for subsonic flow over steps even though it accounts for some flow history effects.

Transition↗

Remote sensing in agriculture

Some examples are presented of the use of remote sensing in cultivated crops, forestry, and range management. Areas of concern include: the determination of crop areas and types, prediction of yield, and detection of disease; the determination of forest areas and types, timber volume estimation, detection of insect and disease attack, and forest fires; and the determination of range conditions and inventory, and livestock inventory. Articles in the literature are summarized and specific examples of work being performed at the Marshall Space Flight Center are given. Primarily, aerial photographs and photo-like ERTS images are considered.

Downs, S. W., Jr.↗

Balancing of high speed interconnect shafting for operation above multiple bending critical speeds

The present work first reviews the key elements of rotating system dynamics which are crucial to the control of lateral vibration levels for supercritical shafting of the type which is considered for use in advanced aircraft applications. Then the results of an analytical investigation of procedures for balancing flexible shafts designed for critical operation are discussed. Some of the conclusions made were: (1) even in undamped configuration, reasonably low vibration levels can be achieved through a sequential multiplane-multispeed balancing process; and (2) combination of analytical response and balancing prediction procedures yields a powerful tool for the dynamic analysis and design of advanced shaft-bearing systems.

Badgley, R. H.↗

AGRESTE project: Agricultural resources investigations in northern Italy and southern France

The author has identified the following significant results. Recognition of rice varieties at the flowering stage by using airborne scanner data at low altitude (1500 m) seems to be feasible. The accuracies obtained on a reduced test area (3 sq km) range from 65% to 83%. Variations of a single cultural factor, such as nitrogen fertilization, induce variations of the total rice biomass at harvest, which can be correlated closely to the values of the reflectance ratio at earing. When grain production is correlated to total biomass, prediction of yield can be achieved based on reflectance data measured two months before harvest.

Berg, A.↗

Thorium concentrations in the lunar surface. II - Deconvolution modeling and its application to the regions of Aristarchus and Mare Smythii

The broad angular response which characterized the Apollo gamma ray spectrometer resulted in a loss of spatial resolution and some of the contrast in determining surface concentrations within lunar regions small compared to the field of view. A deconvolution technique has been developed which removes much of this instrumental effect, thereby improving both spatial resolution and accuracy at the cost of a loss in precision. Geometric models of regional thorium distribution are convoluted through the response function of the instrument to yield a predicted distribution which is compared with the observed data field for quality of fit. Application to areas which include Aristarchus and Mare Smythii confirm some geological relationships and fail to support others.

Haines, E. L.↗

Conceptual design and applications of HgCdTe infrared photodiodes for heterodyne systems

The significance of HgCdTe photodiodes are discussed relative to their existance in heterodyne detection systems operating in the 9 to 11 micrometer CO2 laser wavelength region. Their successful fabrication as well as the physical properties of the materials are described. The implementation of controlled industrial processes are reported with emphasis on the yield of predictable and repeatable detector characteristics to the discriminating systems, demands for high cutoff frequencies, quantum efficiency, and reliability. The most salient production steps and diode characteristics are presented. Measured results from production units are also given.

Sirieix, M. B.↗

Evaluation of the Williams-type spring wheat model in North Dakota and Minnesota

The Williams type model, developed similarly to previous models of C.V.D. Williams, uses monthly temperature and precipitation data as well as soil and topological variables to predict the yield of the spring wheat crop. The models are statistically developed using the regression technique. Eight model characteristics are examined in the evaluation of the model. Evaluation is at the crop reporting district level, the state level and for the entire region. A ten year bootstrap test was the basis of the statistical evaluation. The accuracy and current indication of modeled yield reliability could show improvement. There is great variability in the bias measured over the districts, but there is a slight overall positive bias. The model estimates for the east central crop reporting district in Minnesota are not accurate. The estimate of yield for 1974 were inaccurate for all of the models.

Leduc, S.↗

The 13 November 1984 occultation of BD +08 deg 0471 by (1) Ceres

The 13 November 1984 occultation of BD +08 deg 0471 was discovered during a photographic search carried out with the 0.5 meter Carnegie Double Astrograph at Lick Observatory and the Lowell Observatory PDS microdensitometer. Such a search was stimulated by the curious fact that few favorably located occultations of AGK3 or SAO catalog starts by Ceres will occur during the 1980s. The occultation on 13 November, however, is a particularly good event. The star is 1000 cubic M in V, yielding a predicted drop at occultation of about 10%. Such a drop can be detected by small telescopes equipped with photoelectric photometers, but is too small to be seen visually. The track was predicted to cross the Caribbean, Florida, southern Texas, and Mexico. Based on this prediction, preparations were made to observe the event in Mexico using four portable occultation data systems.

Wasserman, L. H.↗

Current collection from the space plasma through defects in solar array insulation

Operating high-voltage solar arrays in the space environment can result in anomalously large currents being collected through small insulation defects. Tests simulating the electron collection have shown that there are two major collection modes. The first involves current enhancement by means of a surface phenomenon involving secondary electron emission from the surrounding insulator. In the second mode, the current collection is enhanced by vaporization and ionization of the insulator material, in addition to the surface enhancement of the first mode. The electron collection due to surface enhancement (first mode) has been modeled. Using this model, simple calculations yield realistic predictions.

Robinson, R. S.↗

The 13 November 1984 occultation of BD +08 deg 0471 by (1) Ceres

The November 13, 1984 occultation of BD +08 deg 0471 was discovered during a photographic search carried out with the 0.5 meter Carnegie Double Astrograph at Lick Observatory and the Lowell Observatory PDS microdensitometer. Such a search was stimulated by the curious fact that few favorably located occultations of AGK3 or SAO catalog starts by Ceres will occur during the 1980s. The occultation on November 13, however, is a particularly good event. The star is 1000 cubic M in V, yielding a predicted drop at occultation of about 10 percent. Such a drop can be detected by small telescopes equipped with photoelectric photometers, but is too small to be seen visually. The track was predicted to cross the Caribbean, Florida, southern Texas, and Mexico. Based on this prediction, preparations were made to observe the event in Mexico using four portable occultation data systems.

Wasserman, L. H.↗

A study of multi-body aerodynamic interference at transonic Mach numbers

A wind tunnel experiment involving single, double, and triple combinations of mutually interfering generic, unfinned aircraft stores has been conducted. Each combination of stores was tested at Mach numbers from 0.60 to 1.20 and at angles of attack from 0 to 25 deg for the single store and from 0 to 6 deg for the double and triple store configurations. Extensive axial and circumferential pressure and flow visualization data at each store location were obtained. Euler solutions for each configuration at 0 deg incidence have been generated and compared with experimental data. This comparison indicates an Euler flow solver can yield accurate predictions of the location and magnitude of multibody interference provided an appropriate grid is used and the viscous effects associated with these configurations remain small. The data indicate multibody interference in the transonic region increases as the freestream Mach number approaches 1 from either direction, and subsides as the Mach number moves away from sonic conditions. This interference is characterized by a large, localized reduction in pressure on the inboard surfaces of the bodies which results in forces that draw the configuration closer together.

Cottrell, Charles J.↗

Transition boiling heat transfer and the film transition regime

The Berenson (1960) flat-plate transition-boiling experiment has been recreated with a reduced thermal resistance in the heater, and an improved access to those portions of the transition boiling regime that have a steep negative slope. Tests have been made in Freon-113, acetone, benzene, and n-pentane boiling on horizontal flat copper heaters that have been mirror-polished, 'roughened', or teflon-coated. The resulting data reproduce and clarify certain features observed by Berenson: the modest surface finish dependence of boiling burnout, and the influence of surface chemistry on both the minimum heat flux and the mode of transition boiling, for example. A rational scheme of correlation yields a prediction of the heat flux in what Witte and Lienhard (1982) previously identified as the 'film-transition boiling' region. It is also shown how to calculate the heat flux at the boundary between the pure-film, and the film-transition, boiling regimes, as a function of the advancing contact angle.

Ramilison, J. M.↗

Remote sensing of forest canopy and leaf biochemical contents

Recent research on the remote sensing of forest leaf and canopy biochemical contents suggests that the shortwave IR region contains this information; laboratory analyses of dry ground leaves have yielded reliable predictive relationships between both leaf nitrogen and lignin with near-IR spectra. Attention is given to the application of these laboratory techniques to a limited set of spectra from fresh, whole leaves of conifer species. The analysis of Airborne Imaging Spectrometer data reveals that total water content variations in deciduous forest canopies appear as overall shifts in the brightness of raw spectra.

Peterson, David L.↗

Turbulent flow in a 180 deg bend: Modeling and computations

A low Reynolds number k-epsilon turbulence model was presented which yields accurate predictions of the kinetic energy near the wall. The model is validated with the experimental channel flow data of Kreplin and Eckelmann. The predictions are also compared with earlier results from direct simulation of turbulent channel flow. The model is especially useful for internal flows where the inflow boundary condition of epsilon is not easily prescribed. The model partly derives from some observations based on earlier direct simulation results of near-wall turbulence. The low Reynolds number turbulence model together with an existing curvature correction appropriate to spinning cylinder flows was used to simulate the flow in a U-bend with the same radius of curvature as the Space Shuttle Main Engine (SSME) Turn-Around Duct (TAD). The present computations indicate a space varying curvature correction parameter as opposed to a constant parameter as used in the spinning cylinder flows. Comparison with limited available experimental data is made. The comparison is favorable, but detailed experimental data is needed to further improve the curvature model.

Kaul, Upender K.↗

Connection between energy relations of solids and molecules

The universal energy relation, discovered for metallic and covalent solids as well as nuclear matter, is tested for diatomic molecules. It is found that it applies well to covalent diatomic bonds, but that ionic diatomic bonds are in a distinct class. A simple extension of the universal binding energy relation that includes the effects of ionicity ensues. It yields accurate prediction of spectroscopic data for both ionic and covalent bonds in 150 molecules. The form of the covalent part is given by the universal relation, suggesting an intimate relationship between the energetics of solids and diatomic molecules.

Smith, John R.↗

Neptune's Triton: A moon rich in dry ice and carbon

The encounter of the spacecraft Voyager 2 with Neptune and its large satellite Triton in August 1989 will provide a crucial test of ideas regarding the origin and chemical composition of the outer solar system. In this pre-encounter publication, the possibility is quantified that Titron is a captured moon which, like Pluto and Charon, originally condensed as a major planetesimal within the gas ring that was shed by the contracting protosolar cloud at Neptune's orbit. Ideas of supersonic convective turbulence are used to compute the gas pressure, temperature and rat of catalytic synthesis of CH4, CO2, and C(s) within the protosolar cloud, assuming that all C is initially present as CO. The calculations lead to a unique composition for Triton, Pluto, Charon: each body consists of, by mass, 18 1/2 percent solid CO2 ice, 4 percent graphite, 1/2 percent CH4 ice, 29 percent methanated water ice and 48 percent of anhydrous rock. This mix has a density consistent with that of the Pluto-Charon system and yields a predicted mean density for Triton of 2.20 + or - 0.5 g/cu cm, for satellite radius equal to 1,750 km.

Prentice, A. J. R.↗