SEARCH · Engineering Papers

Results for “Wetting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Hierarchical Composites Patterned via 3D Printed Cellular Fluidics

Additive manufacturing of freeform structures containing multiple materials with deterministic spatial arrangement and interactions remains a challenge for most 3D printing processes, due to complex fabrication tool requirements and limitations in printability of some material classes. Here, in this paper, a versatile method is reported to produce architected composites using the concept of cellular fluidics, in which lattices of unit cells are used as templating scaffolds to guide flowable infill materials in a programmed spatial pattern, upon which they are cured in place to produce a deterministically ordered multimaterial solid. The lattice design relies on the unit cell size, type, strut diameter, surface wetting, and distribution of cellular structures to control liquid flow and retention. Individual unit cells are tuned to achieve reliable infilling and combined into higher-order architectures to achieve multiscale composite materials with disparate mechanical properties, including those considered non-printable. Lattice design considerations for leveraging capillary phenomena and demonstrate several methods of patterning polymers in 3D-printed cellular fluidic structures are presented. The concept of tuning the compressive response of an architected composite using a flexible-elastomer as the lattice and a stiff-epoxy as the infill material is illustrated.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Surface Energy Modulated Self‐Assembly of Percolative Gallium Nanodroplet Films for Stretchable Electronics

Advancements in soft robotics and wearable technologies have led to an increased need for flexible and stretchable electronic systems. Liquid metals like Gallium (Ga) and its alloys offer high potential in the field of stretchable electronics and photonics due to their inherent high conductivity and malleability. However, their high surface tension and native oxide formation hinder uniform wetting and continuous film formation to get conducting films. Here, we report a fabrication strategy to realize electrically conductive Ga thin films with effective thicknesses around 100 nm on polymeric and elastomeric substrates. By enhancing the surface energy of the elastomer, we create uniform Ga nanodroplets capable of sustaining stretchability up to 200% strain. Our devices exhibit electronic conduction primarily through tunneling and display strain tunable piezoresistive characteristics, which are explained using Kirchhoff's resistive network and Simmon's analytical tunneling current model. To showcase the device's capability in fields of stretchable electronics, we demonstrate several functional prototypes, including flexible devices integrated with Light Emitting Diodes (LEDs), curvature and pressure sensors, and soft robotic grippers capable of sensing object curvature. The demonstrated devices highlight the potential of this approach for scalable integration of stretchable electronics in soft robotic and wearable platforms.

42 ENGINEERING↗

DOE OSTI2026

Engineering Thermally Resilient and Kinetically Active Reversible Protonic Ceramic Cells via Interfacial Design

Achieving concurrent fast electrode kinetics and long-term thermo-mechanical durability remains a critical challenge for reversible protonic ceramic electrochemical cells (R-PCECs). Herein, we report an interfacial engineering strategy that integrates a perovs.kite-type PrBaRu0.1Co1.9O5+δ (PBRC) nanoparticle layer onto a PrBa0.5Sr0.5Co1.5Fe0.5O5+δ (PBSCF) substrate (PBRC-PBSCF), together with a modified pellet-assisted sintering approach to fabricate dense BaZr0.4Ce0.4Y0.1Yb0.1O3-δ (BZCYYb4411) electrolytes. The in situ reconstructed heterointerface enhances oxygen reduction/evolution reaction (ORR/OER) kinetics, promotes H2O adsorption/dissociation, and improves steam tolerance, as verified by electrochemical measurements and interfacial microstructural analyses. Density functional theory reveals that Ru-induced electronic modulation at the PBRC-PBSCF interface lowers the energy of oxygen vacancy formation and optimizes the position of the O 2p band center, thereby accelerating oxygen redox kinetics and stabilizing the interface. The resulting R-PCECs deliver an excellent peak power density of 1.112 W cm−2 and an electrolysis current density of −1.257 A cm−2 at 1.3 V in 3% H2O wet air at 600°C, with a reasonable faradaic efficiency. Furthermore, the cells demonstrate excellent stability, sustaining 100 h of thermal cycling (400–600°C, 200°C h−1) in both fuel cell and electrolysis modes, with 600 h of stability in electrolysis mode (600°C, −0.5 to −2 A cm−2).

30 DIRECT ENERGY CONVERSION↗

DOE OSTI2025

Extraction of Pure Plastic Resins From PCR Plastic Waste by Solvent-Targeted Recovery and Precipitation (STRAP)

For this work, we have been developing a solvent‐based plastic recycling technology called STRAP. The technology is based on dissolving a targeted plastic resin in a specific solvent that does not dissolve other resins. We have demonstrated STRAP in thousands of bench scale experiments for a large variety of wastes. Recently we have demonstrated the technology for PCR, using mixed plastic wastes (MPWs), from a wet Material Recovery Facility (MRF). The process includes (1) infrared (IR) characterization to determine the plastic composition for accurate selection of the solvent to be used for the extraction of the pure resins. (2) Shredding to the right size and aspect ratio required for flowable and fast dissolvable process. (3) Mixing the MPW in the first solvent to dissolve the first resin. (4) Filtration of the solution plastic blend, to separate the nondissolved plastic from the solution. (5) Further filtration of the solution to remove micron‐sized particle of pigments and fibers. (6) Cooling for precipitation. (7) Filtration of pure resins. (8) Drying of a pure resin. (9) Extrusion of the resin to pellets. (10) Generating films or other products from the pure resin. Steps 1–10 can be considered as one‐cycle that extracted the first resin. (11) A second resin can be extracted with a respective solvent from the plastic that did not dissolve in the first cycle and following steps 1–10 described above. The process also includes characterization of interim and final products. The effort includes building a pilot system at 25 kg/h throughput. We will present specific results for various PCR.

IR characterization↗

DOE OSTI2026

Simulating competition in the US bioeconomy to produce hard‐to‐electrify transportation fuels using limited biomass resources

This study presents a novel bioeconomy optimization framework, BiOpt, designed to address critical questions regarding the strategic use of limited US biomass resources for biofuel production. By integrating detailed techno-economic analyses, life cycle assessments, and resource assessment data, BiOpt optimizes resource distributions across competing technologies to maximize economic performance and/or minimize greenhouse gas emissions. Using feedstock scenarios from the 2023 Billion Ton Study, the analysis explores optimal biomass allocations across sustainable aviation fuel, diesel, and marine biofuel conversion pathways given varying production targets and policy incentives. Results demonstrate distinct feedstock preferences and pathway utilizations when prioritizing economic returns vs. emissions reductions. For instance, fats, oils, and greases were highly favored in cost-optimized scenarios, while low-carbon feedstocks such as wet waste dominated greenhouse gas-minimized strategies. The findings underscore the pivotal role of policy incentives and technological advances in shaping biofuel supply chains and provide actionable insights for scaling sustainable biofuel production to decarbonize hard-to-electrify sectors. This framework offers a robust tool for policymakers and stakeholders to evaluate biofuel strategies that balance energy output, economic viability, and environmental impact.

09 BIOMASS FUELS↗

DOE OSTI2025

CO 2 Oxidative Ethane Dehydrogenation on CeO 2 /SiO 2 ‐Supported NiFe 3 Catalysts

CO 2 -assisted oxidative dehydrogenation of ethane is a sustainable alternative to steam cracking for ethylene production. In this study, a series of CeO 2 on SiO 2 supported NiFe 3 catalysts were synthesized by incipient wetness impregnation and tested for oxidative dehydrogenation performance. The CeO 2 /SiO 2 supported catalysts with high weight loading of CeO 2 (50%–75%) provided higher activity than the lower CeO 2 (0%–25%) loaded catalysts (with ethylene production rates of 0.62–0.98 µmol/g cat /s and 0.19–0.3 µmol/g cat /s, respectively) while maintaining high ethylene selectivity (43%–45%). In contrast, the NiFe 3 supported on only CeO 2 also exhibited high activity (ethylene production rate of 0.71 µmol/g cat /s), but the ethylene selectivity (16%) was greatly decreased compared to the mixed system. Temperature programmed reduction, X-ray diffraction, and Raman spectroscopy all indicate the creation of a solid solution of the Fe and Ni doped into the CeO 2 crystal structure in the catalysts with high CeO 2 loading/bulk CeO 2 support. Here, the high ethylene selectivity in the high CeO 2 loading catalysts indicates that the Fe is preferentially creating the solid solution, with the decrease in selectivity observed in the CeO 2 -only supported catalyst likely resulting from CeO 2 interacting directly with Ni, creating Ni-CeO X interfaces that are known active sites for the unwanted side reaction of dry reforming.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Distinct Melt Infusion Architectures of Antiperovskite Solid Electrolytes

Antiperovskite solid electrolytes are an emerging class of lithium‐ion conductors distinguished by their unusually low melting points, enabling scalable, low‐temperature processing routes not accessible to most solid electrolytes. In this work, we synthesize phase‐pure chloride (Cl), bromide (Br), and mixed halide (ClBr) variants of antiperovskites and investigate their ionic conductivities in both powder and hot‐pressed forms. Hot pressing significantly enhances conductivity across all compositions, while energy‐dispersive X‐ray spectroscopy (EDS) of the mixed halide system reveals halide surface migration during densification. We further investigate the melt‐infiltration behavior of these electrolytes into substrates relevant to solid‐state battery architectures, including Al and Cu current collectors, conventional NMC and LFP cathodes, and a foamed NMC cathode with a highly porous architecture. The foamed cathode enables deep and uniform electrolyte penetration, highlighting the role of electrode architecture in facilitating melt infiltration. Across all substrates, electrolyte halide chemistry strongly influences wetting behavior, penetration depth, and resulting microstructural morphology. Together, these results establish clear processing–structure relationships for melt‐infiltrated antiperovskite solid electrolytes and demonstrate how electrolyte chemistry and electrode architecture govern interfacial morphology during integration, providing practical guidelines for processing and structural design in solid‐state battery systems.

antiperovskite↗

DOE OSTI2024

Interactions Between Climate and Species Drive Future Forest Carbon and Water Balances

Global change is altering forest carbon and water balances; however, the extent to which tree species shape ecosystem‐scale responses to climate, particularly in biodiverse forests, remains unclear. To address this, we simulated the effects of an envelope of future climate conditions on watershed carbon and water balances and quantified the contributions of tree species based on their xylem anatomy. We accomplished this by incorporating species‐level transpiration calculations into a landscape‐scale ecosystem process model. Our revised model linked the effects of forest succession, species composition, and climate change on water and carbon. Calibration of forest water fluxes using sap flux measurements and catchment water balances captured variability in species transpiration and interannual ET in biodiverse, humid temperate forest catchments in the southern Blue Ridge Mountains, USA. Across wet and dry future climate projections, ET increased, and streamflow and net carbon uptake decreased, particularly under a scenario of increasing drought. Despite accounting for just 30% of current biomass, diffuse‐porous tree species were the main driver of carbon and water flux responses now and in the future, thus intensifying the increase in ET and decline in streamflow. As diffuse‐porous biomass continues to increase, these forests will be increasingly sensitive to drought, amplifying losses of carbon sequestration and freshwater delivery.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Synthesis and Characterization of Methacrylamide-Based Block Random Copolymers via Amine Functionalization of Polystyrene- Block -Poly(Pentafluorophenyl Methacrylate) Toward Enhanced Amenability to Manufacturing Criteria in Nanolithography

Recent interest in manipulating the chemistry of block copolymers (BCPs) to manage the covarying properties necessary to meet manufacturing criteria in nanolithography has resulted in the development and expansion of the A-block-(B-random-C) BCP architecture, where the random block allows for the decoupling of thermodynamic and wetting properties. Previous reports of such BCPs have used click chemistry to create the desired random block, but all such instances possess additional functional groups that are susceptible to undesirable side reactions upon annealing, such as cross-linking and surface grafting. This study reports the substitution reaction of polystyrene-block-poly(pentafluorophenyl methacrylate) (PS-b-PPFMA) with primary amines. The resulting methacrylamide structure of the functionalized random block has only an amide linkage between the attached functional group and the polymer backbone, thereby omitting any sources of side reactions within the BCP. The outcomes of this report also demonstrate the enhanced thermal stability of these materials by virtue of their stable amide bonds. A range of random copolymer compositions is assessed to develop BCPs in which the random block has approximately the same surface energy as the PS block. These BCPs can self-assemble into perpendicular lamellae and are therefore promising candidates for directed self-assembly.

block copolymers↗

DOE OSTI2025

Exploring Phosphonium‐Based Anion Exchange Polymers for Moisture Swing Direct Air Capture of Carbon Dioxide

This study explores the performance and stability of ammonium and phosphonium-based polymeric ionic liquids (PILs) with methyl and butyl substituents in moisture-swing direct air capture of CO 2 . The polymers are synthesized with chloride counterions, followed by ion exchange to the bicarbonate ion, and tests for CO 2 capture capacity and stability under cyclic wet–dry conditions. The phosphonium polymer with methyl substituents [PVBT-MeP] demonstrates the highest CO 2 capture capacity at ≈510 µmol g⁻¹, attributed to minimal steric hindrance and stronger ion pairing with bicarbonate. However, oxidative degradation is detected by 31 P NMR spectroscopy after the moisture swing experiment, with the appearance of a phosphine oxide peak at 61.28 ppm, which indicates phosphorus oxidation as the primary degradation pathway. In contrast, the ammonium polymer with butyl substituents [PVBT-BuN] exhibits the highest stability, showing no degradation over five moisture swing cycles. Additional stability experiments in 0.5 m KHCO 3 solutions reveal no degradation for any PIL, suggesting that oxidative degradation is driven by dynamic acid-base reactions during the moisture swing cycles in the air. Furthermore, these findings reveal the potential of phosphonium-based PILs for moisture-swing direct air capture, achieving high capacity while highlighting the need for optimized stability through counterion and structural design.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Evidence of Polarization‐Type Potential‐Induced Degradation (PID‐p) in the Field and Investigation of the Recovery Mechanism on Bifacial p ‐PERC Modules

This study investigates the polarization-type potential-induced degradation (PID-p) of bifacial glass/glass p-type passivated emitter rear contact (p-PERC) modules in the field and their recovery behavior. Modules were installed with three mounting configurations providing different albedo conditions. System voltage (–600, –1500, and +1500 V) was applied to the cell circuits, with respect to the grounded module frames. No degradation was observed for positively biased modules, but PID-p was identified on the rear side when cells are negatively biased, with maximum power dropping during the first days and stabilizing at values up to 8% loss. Electroluminescence images revealed a variation of the cells' PID-p susceptibility within a module. Three parameters were shown to impact the degradation rate: rear albedo light, voltage, and wetness conditions. Degraded modules were recovered either by (1) a positive bias (+1500 V), (2) outdoor illumination with the front side facing sun, (3) outdoor illumination with the rear side facing sun, or (4) dark storage. A recovery pattern was identified with I–V parameters decreasing to a local minimum before increasing to full recovery. The proposed mechanism is based on the band bending at the rear p-type Si/AlO x/SiN x interface, going from inversion to depletion and accumulation states. Full recovery was achieved in 2–7 h for the modules recovered with the rear side facing sun, four to eight nights for the modules positively biased at night, and 10–20 days for the modules with the front side facing sun. Dark storage showed slower recovery rates as I–V parameters were not improving even after 1 month. Here, the recovery rates were correlated with the net Coulombs transferred during the preceding PID stress: When more Coulombs are transferred during the degradation, the extent of degradation is greater, leading to slower recovery rates.

14 SOLAR ENERGY↗

DOE OSTI2026

Electrochemical Modeling of PID Leakage Current of PV Modules: Steady-State Current, Transient Current, and RC-Equivalent Circuit

Potential-induced degradation (PID) remains a significant reliability concern for photovoltaic (PV) modules, arising when a voltage difference between the module frame and the solar cells drives unintended leakage current through the glass-encapsulant stack. Although PID ultimately manifests as PID-s, PID-p, or PID-c, the underlying behavior of the leakage current-its magnitude and time dependence-requires clearer electrochemical interpretation. Traditional explanations attribute the initial transient current to bulk capacitive elements of the glass, encapsulant, and antireflection coatings, and the steady-state current according to their effective ohmic resistance. More recent studies, however, indicate that electrochemical charge-transfer processes at the encapsulant-metallization interface can play a dominant role in defining the leakage-current path. This paper develops a unified electrochemical framework for modeling PID leakage current. First, an RC-equivalent circuit is formulated by combining conventional RC elements with a Randles-type interface to capture transient leakage current through double-layer capacitance and faradaic processes at ionic-electronic boundaries. Second, the steady-state current-voltage behavior is explained using a linearized Butler-Volmer relationship, showing that the measured ohmic response corresponds to the low-overpotential limit of charge-transfer kinetics. Analytical results demonstrate that, for typical module materials-3.2-mm soda-lime glass and 0.45-mm encapsulant-the dominant modulators to PID leakage current are the glass surface resistance (under dry-surface conditions), the glass bulk capacitance, and the encapsulant resistance (under wet-surface conditions), with soda lime glass surface and EVA/POE encapsulant resistances primarily governing steady-state current. The proposed electrochemical model is validated against measured leakage-current data, showing good agreement in both the magnitude and the time-dependent evolution of PID leakage current.

14 SOLAR ENERGY↗

DOE OSTI2025

Development of a Printable Prill Formulation Technique and Demonstration of Monomodal Prill Size on Compaction Density and Compressive Strength

Polymer-bonded explosive molding powder, or “prills,” are relied on for the fabrication of pressed high explosives since the 1950's. The wet granulation technique, also known as “slurry coating,” that is used to formulate prills, is a complex process that results in polydisperse and variable yields. This makes it difficult to study the mesoscale effect that prills have on the microstructure of a pressed article. The following study introduces a novel approach to energetic granulation that leverages techniques used in the additive manufacturing of paste-like energetic materials. This extrusion granulation, or prill printing technique, makes it possible to tailor the sizes and shapes of prills, allowing for their morphological influences to be studied in a controlled manner. The following work details the fabrication and characterization of four monomodal size lots of prills using an inert formulation (95 wt.% melamine, 5 wt.% polymer binder). Prills from each size lot were die-pressed using a fixed recipe to investigate how prill size impacts compaction density and therefore compressive strength. It was found that larger prills influence the pressing density by creating larger defects within the microstructure of a pressed article, resulting in a decrease in compressive strength.

direct ink write↗

DOE OSTI2026

Monolayer Films of Binary Metal Oxide Nanoparticles for Carbon Nanotube Synthesis

Binary metal oxide nanoparticles (biMO-NPs) combining transition and main-group metals with well-organized atomic architectures have unique potential as robust and economical heterogeneous catalysts. Herein, metal oxide nanoparticles (CoAlxOy) using cobalt and aluminum were synthesized, and their structure, morphology, and chemical composition were investigated using various characterization techniques. The biMO-NPs, which had a Gaussian-type size distribution (∼6 nm), were assembled on plain silicon substrates modified chemically with linker molecules bearing suitable end groups. Surface analysis revealed an ordered, uniform, close-packed arrangement of biMO-NPs forming a monolayer architecture with nanoscale thickness (∼12 nm), high surface uniformity, and negligible defects. The nanoparticle monolayer film (NP-MF) was employed as a catalyst to grow carbon nanotube (CNT) forests via the thermal chemical vapor deposition (CVD) method, similar to those grown from catalyst thin films deposited by physical vapor deposition. Structural characterization confirmed the growth of a dense, uniform, high-quality vertically aligned carbon nanotube (VA-CNT) forest with a length of ∼125 µm, which is comparable to the VA-CNTs grown from expensive thin films. Thus, CNT growth was successfully catalyzed by the biMO-NPs, highlighting a simple and inexpensive alternative for catalyst deposition. In this innovative wet-chemistry approach, the catalyst and catalyst support are combined within a single nanoparticle before NP-MF assembly. Interestingly, this approach provides a scalable and cost-effective pathway for CNT growth, eliminating the need for expensive thin deposition techniques.

Regmi, Bishow [University of Cincinnati]↗

DOE OSTI2026

Influence of plateau, slope, and valley on soil hydrology during the dry season in a Central Amazon old‐growth forest

Soil moisture regulates plant water supply and drought sensitivity in tropical forests, yet its vertical and topographic variation remains poorly characterized. We combined high-frequency time-domain reflectometry measurements from 5 to 100 cm across plateau, slope, and valley landforms at the Zona Florestal 2 research site north of Manaus, Central Amazonia, to quantify how soil moisture memory, timing of responses to rainfall, dry-down rates (τ), and soil–water depletion vary across these contrasting landforms. Landform-specific soil moisture calibration curves ensured accurate volumetric water content estimates in these highly weathered soils. During the 2023 dry-to-wet transition (August–November), soil moisture memory showed strong topographic contrasts, with valley profiles increasing from ∼47 h at 5 cm to ∼154 h at 100 cm, while plateaus exhibited higher near-surface persistence (∼124 h at 5 cm) but weaker memory at depth. Dry-down behavior reinforced these differences as valley soils exhibited τ values exceeding ∼200 h, more than double the characteristic τ of plateau soils (∼90 h). Rainfall–soil moisture correlations indicated immediate responses at shallow depths in valleys and progressively longer lags with depth on plateaus and slopes. These hydrologic patterns were mirrored in depletion profiles, which declined sharply below 30 cm on plateaus but remained high and sustained throughout the upper meter in slopes and valleys. Together, these findings provide the first depth-resolved field measurements of soil moisture memory, rainfall coupling, dry-down constants, and depletion dynamics across major upland landforms in Central Amazonia and offer clear observational benchmarks for improving land-surface and ecosystem model representations of soil–water processes.

Hillslope↗

DOE OSTI2025

Impacts of year-to-year weather variability and inter-panel spacing on agrivoltaic crop yields in Massachusetts

Deployment of utility-scale solar power plants could lead to agricultural land-use changes. Agrivoltaics, a dual land use combining solar and agriculture on the same land, can provide multiple environmental benefits, including improving soil quality and water use efficiency. The body of agrivoltaic field data is still growing, and crop responses to different solar configurations under different local climates are highly varied. We investigate the impact of adding spacing between adjacent solar panels in a fixed-tilt system to improve light diffusion to crops. For four crops (broccoli, peppers, kale, Swiss chard) grown across 3 years in an agrivoltaic system in Massachusetts, we found that only kale had a linearly increasing trend as the inter-panel spacing increased from 0.6 m to 1.5 m (2 ft to 5 ft). However, there were significant year-to-year differences in the yield of agrivoltaic versus control fields. Agrivoltaic and full sun fields produced equivalent yields in a hot, dry year, whereas the full-sun control beds produced more salable yield for all four crops in a warm, wet year. This demonstrates variability of agricultural outcomes and the need for more multi-year studies to ensure agrivoltaic impacts are not under- or overestimated.

14 SOLAR ENERGY↗

DOE OSTI2025

The Freundlich isotherm equation best represents phosphate sorption across soil orders and land use types in tropical soils of Puerto Rico

Biomass production in the lowland wet tropical forest is greater than in any other biome, and it is typically limited by soil phosphorus (P) availability. However, the mechanisms involved in the P cycle remain poorly represented in Earth System Models (ESMs). Soil P sorption processes are key in the P cycle and for understanding the extent of P limitation for plant productivity. Currently, a few ESMs include isotherm equations to model these processes. Although the Langmuir equation is widely cited, other isotherm equations may better describe sorption in tropical soils. Here, we use a diverse range of soil samples from Puerto Rico to test the validity of the Langmuir, Freundlich, and Temkin equation. We found that across four soil orders (Inceptisols, Mollisols, Oxisols, Ultisols), and forested and cultivated land use types, the Freundlich equation best represented soil P sorption. Furthermore, the Langmuir and the Temkin equations poorly represent soil P adsorption, especially at low P concentrations. Specifically, the Langmuir equation underestimated soil P adsorption by 40% and the Temkin equation overestimated adsorption by 76%. We also found, as expected, that soil clay content and pH were the most important parameters explaining the variability of the Freundlich (K f ) constant. Greater clay content and lower pH, common in highly weathered Ultisols and Oxisols which are abundant in the tropics, led to greater K f values. Overall, our results suggest that a diversity of soils can prompt underestimation of P sorption when using the Langmuir isotherm, which leads to an overestimation of available P that can have repercussions on ESM predictions of the P cycle and tropical forest productivity.

Earth system models↗

DOE OSTI2026

Drought shifts dissolved organic matter sources from above- to belowground and stress-induced processes in Amazon white-sand forests

White-sand forests contribute significantly to dissolved organic matter (DOM) production in the central Amazon, forming blackwater rivers that dominate organic matter export from the Amazon basin to the ocean. Despite their importance in controlling DOM export, white-sand forests are understudied, and it remains unclear whether systematic changes in the formation of blackwater DOM occur and how seasonal variations and extremes like El Niño-associated droughts impact them. We collected soil porewater from two central Amazon white-sand forests for two years, spanning a wet La Niña year followed by an El Niño drought year. The molecular composition of DOM was analyzed using high-resolution mass spectrometry, and correlation network analysis was employed to identify ecologically meaningful DOM subsets. Using additional chemical characterization, database annotations, correlation with 14C-age of DOM and climatic variables, and ecological null modeling, we propose five distinct DOM sources: plant litter and throughfall, soil organic matter (SOM) decomposition, root exudation, and two drought response subsets of likely microbial and plant origin. During drought conditions, aboveground plant-derived compounds decreased, while SOM products, root exudates, and drought response compounds increased. These drought responses were qualitatively similar in both years but notably amplified in the drier El Niño year. Drought amplified deterministic control over DOM composition, indicating that DOM reflected directed biological responses and that future droughts are likely to generate similar shifts. Overall, drought substantially altered belowground carbon cycling by shifting DOM sources and inducing stress responses, effects expected to recur and potentially intensify under future climate scenarios.

Lange, Dan F.↗