Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Wake Vortex”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Flight test techniques for wake-vortex minimization studies

Flight test techniques developed for use in a study of wake turbulence and used recently in flight studies of wake minimization methods are discussed. Flow visualization was developed as a technique for qualitatively assessing minimization methods and is required in flight test procedures for making quantitative measurements. The quantitative techniques are the measurement of the upset dynamics of an aircraft encountering the wake and the measurement of the wake velocity profiles. Descriptions of the instrumentation and the data reduction and correlation methods are given.

Jacobsen, R. A.↗
NASA NTRS1973

Vortex wake research

NASA investigations of aircraft trailing vortices are reviewed. Results obtained in flight on vortex characteristics, such as decay of maximum velocity and vortex drift, are presented for distances behind a generating C-5 aircraft from 0.6 to 13.0 nautical miles. The lateral control activity of a CV-990 aircraft probing the vortices generated by the C-5 aircraft is illustrated and the effect of the C-5 aircraft configuration on this activity is indicated. Results are presented from near-field and far-field studies of accelerated vortex dissipation through the use of various devices such as mass ejection, spoilers, vortex generators, and trailing drag devices.

Zalovcik, J. A.↗
NASA NTRS1984

A computational method for helicopter vortex wakes

A method for calculating the wake geometry and blade loads for a hovering helicopter rotor is presented. The approach incorporates a simplified free wake model of the rotor in a finite difference calculation of the flow field. A variation of the 'cloud-in-cell' technique, modified to eliminate self-induced velocity errors for curved vortex filaments, is used. Simple lifting line theory is used to calculate the blade loads. Calculations showing the effect of vortex core size and the number of vortex filaments representing the wake are presented. For large numbers of vortices, it is seen that the wake geometry fails to converge. However, only a few vortices are needed to adequately represent the wake. Comparisons with experimental results are also presented.

Roberts, T. W.↗
NASA NTRS1973

Airfoil wake vortex characteristics in the far field

Tangential and axial velocity profiles were measured in the far field wake vortices of several different airfoils. The results are summarized and discussed. A scanning laser velocimeter was used to obtain data up to 1000 chord lengths behind airfoils with rectangular, diamond-shaped, and swept wing planforms at several different angles of attack. The results show general agreement with wind tunnel measurements made in the near field. The results identify two separate flow regions for the dependence of vortex maximum tangential velocity on downstream distance; an inviscid region where the velocity remains constant after rollup to downstream distances of 200 chord lengths, and then a decay or viscous region that persisted to the limit of the test distance. The decay rates appear to be sensitive to both angle of attack and span loading. The maximum tangential velocity for downstream distances to 40 span lengths was reduced by a factor of 2 by changing from an elliptic (swept wing) or rectangular span loading to a triangular-like span loading (diamond-shaped planform wing). Measured axial velocity defects are shown to agree with those predicted by laminar theory.

Orloff, K. L.↗
NASA NTRS1997

Wake Vortex Encounter Model Validation Experiments

The goal of this current research is to establish a database that validate/calibrate wake encounter analysis methods for fleet-wide application; and measure/document atmospheric effects on wake decay. Two kinds of experiments, wind tunnel experiments and flight experiments, are performed. This paper discusses the different types of tests and compares their wake velocity measurement.

Vicroy, Dan↗
NASA NTRS1981

Wake Vortex Attenuation Flight Tests: A Status Report

Flight tests were conducted to evaluate the magnitude of aerodynamic attenuation of the wake vortices of large transport aircraft that can be achieved through the use of static spoiler deflection and lateral control oscillation. These methods of attenuation were tested on Boeing B-747 and Lockheed L-1011 commercial transport aircraft. Evaluations were made using probe aircraft, photographic and visual observations, and ground based measurements of the vortex velocity profiles. The magnitude of attenuation resulting from static spoiler deflection was evaluated both in and out of ground effect. A remotely piloted QF-86 drone aircraft was used to probe the attenuated vortices in flight in and out of ground effect, and to make landings behind an attenuated B-747 airplane at reduced separation distances.

Barber, Marvin R.↗
NASA NTRS1997

Wake Sensor Evaluation Program and Results of JFK-1 Wake Vortex Sensor Intercomparisons

The overall approach should be to: (1) Seek simplest, sufficiently robust, integrated ground based sensor systems (wakes and weather) for AVOSS; (2) Expand all sensor performance cross-comparisons and data mergings in on-going field deployments; and (3) Achieve maximal cost effectiveness through hardware/info sharing. An effective team is in place to accomplish the above tasks.

Barker, Ben C., Jr.↗
NASA NTRS1978

Wake vortex measurements of bodies at high angle of attack

Three-dimensional laser velocimeter measurements have been made of the wake vortices of a slender tangent-ogive body which had nose and body fineness ratios of 3.5 and 12, respectively. Data were obtained for an angle of attack to seminose angle ratio of 2.3 at a free-stream Mach number of 0.6 and unit Reynolds number of 2 million/ft. Details of the mean flow field are presented and features of the turbulent and unsteady nature of the vortex flow field are discussed. Problems associated with obtaining meaningful vortex measurements in high-speed flows are addressed.

Owen, F. K.↗
NASA NTRS2010

Three-Phased Wake Vortex Decay

A detailed parametric study is conducted that examines vortex decay within turbulent and stratified atmospheres. The study uses a large eddy simulation model to simulate the out-of-ground effect behavior of wake vortices due to their interaction with atmospheric turbulence and thermal stratification. This paper presents results from a parametric investigation and suggests improvements for existing fast-time wake prediction models. This paper also describes a three-phased decay for wake vortices. The third phase is characterized by a relatively slow rate of circulation decay, and is associated with the ringvortex stage that occurs following vortex linking. The three-phased decay is most prevalent for wakes imbedded within environments having low-turbulence and near-neutral stratification.

Proctor, Fred H.↗
NASA NTRS2000

Numerical Study of Wake Vortex Behavior in Turbulent Domains with Ambient Stratification

A three-dimensional large eddy simulation model is used to investigate the sensitivity of ambient stratification with turbulence on the behavior of aircraft wake vortices. Modeled ambient turbulence levels range from very weak to moderate, and stratification levels range from strongly stable to unstable. The results of profound significance from this study are: 1) very little sensitivity between vortex linking time and the level of stratification, 2) the mean vortex separation remained nearly constant regardless of stratification and turbulence (at least prior to linking), 3) the wake vortices did not rise regardless of the level of stratification, and 4) for very strong stratification, the vortex stopped descending and quickly dissipated even before vortex linking could occur. These results are supported by experimental data and are contrary to conclusions from other numerical studies that assume laminar flow and/or relatively-low Reynolds numbers.

Switzer, George F.↗
NASA NTRS2008

Information Requirements for Supervisory Air Traffic Controllers in Support of a Mid-Term Wake Vortex Departure System

A concept focusing on wind dependent departure operations has been developed the current version of this concept is called the Wake Turbulence Mitigation for Departures (WTMD). This concept takes advantage the fact that cross winds of sufficient velocity blow wakes generated by "heavy" and B757 category aircraft on the downwind runway away from the upwind runway. Supervisory Air Traffic Controllers would be responsible for authorization of the Procedure. An investigation of the information requirements necessary to for Supervisors to approve monitor and terminate the Procedure was conducted. Results clearly indicated that the requisite information is currently available in air traffic control towers and that additional information was not required.

Lohr, Gary W.↗
NASA NTRS1990

Preliminary flight test investigation of an airborne wake vortex detection concept

NASA and the FAA have conducted a brief flight-test investigation to furnish preliminary data on the feasibility of transport aircraft wake-vortices' detection, with a view to improving airport capacity by reducing the longitudinal in-trail spacing between aircraft on landing runs. Attention was given to the possibility that the detection of strong vortices at a sufficiently early stage might furnish reasonable warning of impending aerodynamic effects. Preliminary results indicate that while maximum detection distances obtainable with wingtip-mounted flow-angularity vanes are slightly lower than had been predicted, improved detector algorithms may render them more sensitive.

Verstynen, Harry A.↗
NASA NTRS2002

Wake Vortex Prediction Models for Decay and Transport Within Stratified Environments

This paper proposes two simple models to predict vortex transport and decay. The models are determined empirically from results of three-dimensional large eddy simulations, and are applicable to wake vortices out of ground effect and not subjected to environmental winds. The results, from the large eddy simulations assume a range of ambient turbulence and stratification levels. The models and the results from the large eddy simulations support the hypothesis that the decay of the vortex hazard is decoupled from its change in descent rate.

Switzer, George F.↗
NASA NTRS1977

Ground-based measurements of the wake vortex characteristics of a B747 aircraft in various configurations

A Boeing 747 aircraft flew 54 passes at low level over ground-based sensors. Vortex velocities were measured by a laser-Doppler velocimeter, an array of monostatic acoustic sounders, and an array of propeller anemometers. Flow visualization of the wake was achieved using smoke and balloon tracers. Preliminary results were obtained on the initial downwash field, the time for merging of the multiple vortices, the velocity fields, vortex decay, and the effects of spoilers and differential flap settings on the dissipation and structure of vortices.

Hallock, J. N.↗
NASA NTRS1999

N-S Simulations of Crow-Type Instabilities in Vortex Wake

Three-dimensional Navier-Stokes simulations of the Crow instability of wake vortices are conducted using large-eddy simulations without background turbulence. Sinusoidal displacement has been specified as the initial perturbation for the vortex system. The results have shown that the minimum Crow instability wavelength is about one vortex spacing shorter than predicted by Crow's linear stability theory. The planar- standing-wave-angle value and the amplitude indifference behavior agree with Crow's analysis. Simulations with periodicity in the axial direction have indicated minor influence of axial flow on the Crow instability.

Zheng, Z. C.↗
NASA NTRS2001

Vortex Wake Geometry of a Model Tilt Rotor in Forward Flight

A full-span 0.25-scale V-22 tiltrotor was tested in the NASA Ames 40-by 80-Foot Wind Tunnel in November 2000. The main objective of the test was to acquire a comprehensive database to validate tiltrotor analyses. Figure 1 shows the model installed in the Ames 40- by 80-Foot Wind Tunnel. Rotor and vehicle performance measurements were taken in addition to wing pressures, acoustics, and flow visualization. A dual acoustic traverse system was installed to measure blade-vortex interaction (BVI) noise levels and directivity. Test conditions included hover and forward flight in helicopter mode. Angle-of-attack and thrust sweeps for three tunnel speeds were acquired before model problems caused the premature conclusion of the test. The test will resume in the Ames 80- by 120-Foot Wind Tunnel in late 2001. This paper will focus on the wake geometry measurements that were acquired during the test. The wake geometry measurements were a small subset of a larger matrix of planned measurements designed to study the development and structure of the dual vortex system generated during BVI conditions. The present paper will provide wake geometry data for four test conditions. In addition, the data will be compared with previously acquired wake measurements from an isolated tiltrotor

Wadcock, Alan J.↗
NASA NTRS1972

Exploratory flight investigation of aircraft response to the wing vortex wake generated by jet transport aircraft

The effect of intercepting wing tip vortices generated by large jet transports, including jumbo jets, over separation distances from 1 nautical mile to 15 nautical miles is evaluated on the basis of the response of a vortex probe airplane in the roil mode. The vortex probe test aircraft included a representative general aviation airplane, an executive jet, a fighter, and light and medium weight jet transports. The test conditions and airplane configurations were comparable to those normally used during takeoff, landing, or holding pattern operations. For flight safety the tests were performed at altitudes from 9500 feet to 12,500 feet. In addition to an evaluation of the probe airplane response, a flight test technique is suggested for determining minimum separation distance, using as variable the ratio of vortex-induced roll acceleration to maximum lateral control acceleration and the gross weight of the generating aircraft.

Andrews, W. H.↗