Visual interpretation and time series modeling of Landsat imagery highlight drought's role in forest canopy declines
Explore the source record for details and available documents.
David M. Bell↗
SEARCH · Engineering Papers
Results for “Visual Modeling”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Instrumentation and data acquisition systems
A comprehensive and integrated measurement system was identified and a design and development effort initiated to meet the criteria imposed by the National Transonic Facility operating environment. Specific measurement areas receiving concentrated attention include: data acquisition, force measurement, pressure instrumentation, flow visualization techniques, model attitude and model deformation measurement, and temperature measurement. The NTF instrument complex will be centered around four 32-bit, 1-microsecond-cycle-time central processing units connected in a multipoint-distributed network configuration. The principal activities to be supported by these computers are: (1) data base management and processing; (2) research measurement data acquisition and display; (3) tunnel and model control; and (4) process monitoring and communication control. The distributed network approach was chosen to modularize the functional software into definable and implementable parts by the various groups involved in the design and to permit use of similar hardware configurations to improve reliability and maintainability.
Guarino, J. F.↗
Further measurements and reassessment of the magnetic-monopole candidate
The data on the 1975 Lexan event are reexamined in a framework that does not depend on the details of a particular track model. Instead, visual measurements of two quantities, photographic evidence, and silver-grain densities measured with an automated microscopic-image dissector are cited. It is shown that throughout the detector stack the particle had a roughly constant value of absolute Z/beta of about 109-114 based on energy deposition at radial distance less than about 0.01 micron. Its energy deposition at radial distance greater than about 20 microns was incompatible with that expected from any known cosmic ray nucleus with Z/beta in this range. A monopole is ruled out, and the three candidates compatible with the data are: (1) a slow, supermassive particle with beta about 0.4, charge about 45e, and mass above 1000-10,000 amu; (2) a fast antinucleus with Z/beta about -109 to -114 and absolute Z between 76 and 96; and (3) a very fast nucleus with Z about 110-114 and beta above about 0.99.
Price, P. B.↗
Development of test methods for scale model simulation of aerial applications in the NASA Langley Vortex Research Facility
As part of basic research to improve aerial applications technology, methods were developed at the Langley Vortex Research Facility to simulate and measure deposition patterns of aerially-applied sprays and granular materials by means of tests with small-scale models of agricultural aircraft and dynamically-scaled test particles. Interactions between the aircraft wake and the dispersed particles are being studied with the objective of modifying wake characteristics and dispersal techniques to increase swath width, improve deposition pattern uniformity, and minimize drift. The particle scaling analysis, test methods for particle dispersal from the model aircraft, visualization of particle trajectories, and measurement and computer analysis of test deposition patterns are described. An experimental validation of the scaling analysis and test results that indicate improved control of chemical drift by use of winglets are presented to demonstrate test methods.
Jordan, F. L., Jr.↗
Mass and Momentum Turbulent Transport Experiments with Confined Coaxial Jets
Downstream mixing of coaxial jets discharging in an expanded duct was studied to obtain data for the evaluation and improvement of turbulent transport models currently used in a variety of computational procedures throughout the propulsion community for combustor flow modeling. Flow visualization studies showed four major shear regions occurring; a wake region immediately downstream of the inlet jet inlet duct; a shear region further downstream between the inner and annular jets; a recirculation zone; and a reattachment zone. A combination of turbulent momentum transport rate and two velocity component data were obtained from simultaneous measurements with a two color laser velocimeter (LV) system. Axial, radial and azimuthal velocities and turbulent momentum transport rate measurements in the r-z and r-theta planes were used to determine the mean value, second central moment (or rms fluctuation from mean), skewness and kurtosis for each data set probability density function (p.d.f.). A combination of turbulent mass transport rate, concentration and velocity data were obtained system. Velocity and mass transport in all three directions as well as concentration distributions were used to obtain the mean, second central moments, skewness and kurtosis for each p.d.f. These LV/LIF measurements also exposed the existence of a large region of countergradient turbulent axial mass transport in the region where the annular jet fluid was accelerating the inner jet fluid.
Johnson, B. V.↗
Mass and momentum turbulent transport experiments with confined swirling coaxial jets
Swirling coaxial jets mixing downstream, discharging into an expanded duct was conducted to obtain data for the evaluation and improvement of turbulent transport models currently used in a variety of computational procedures throughout the combustion community. A combination of laser velocimeter (LV) and laser induced fluorescence (LIF) techniques was employed to obtain mean and fluctuating velocity and concentration distributions which were used to derive mass and momentum turbulent transport parameters currently incorporated into various combustor flow models. Flow visualization techniques were also employed to determine qualitatively the time dependent characteristics of the flow and the scale of turbulence. The results of these measurements indicated that the largest momentum turbulent transport was in the r-z plane. Peak momentum turbulent transport rates were approximately the same as those for the nonswirling flow condition. The mass turbulent transport process for swirling flow was complicated. Mixing occurred in several steps of axial and radial mass transport and was coupled with a large radial mean convective flux. Mixing for swirling flow was completed in one-third the length required for nonswirling flow.
Roback, R.↗
Mass and momentum turbulent transport experiments with confined swirling coaxial jets. I
An experimental study of mixing downstream of swirling coaxial jets discharging into an expanded duct was conducted to obtain data for the evaluation and improvement of turbulent transport models currently used in a variety of computational procedures throughout the combustion community. A combination of laser velocimeter and laser induced fluorescence techniques was employed to obtain mean and fluctuating velocity and concentration distributions which were used to derive mass and momentum turbulent transport parameters currently incorporated into various combustor flow models. Flow visualization techniques were also employed to determine qualitatively the time dependent characteristics of the flow and the scale of turbulence. Mean and fluctuating velocity profiles and probability density functions were obtained at selected axial and radial locations throughout the flow field. Mixing occurred in several steps of axial and radial mass transport and was coupled with a large radial mean convective flux. Major mixing regions were observed to occur (1) at the interface between the inner stream and the centerline recirculation zone, and (2) at the interface between the inner jet and the annular jet streams. Mixing for swirling flow was completed in one-third the length required for nonswirling flow.
Johnson, B. V.↗
Computational approaches to vision
Vision is examined in terms of a computational process, and the competence, structure, and control of computer vision systems are analyzed. Theoretical and experimental data on the formation of a computer vision system are discussed. Consideration is given to early vision, the recovery of intrinsic surface characteristics, higher levels of interpretation, and system integration and control. A computational visual processing model is proposed and its architecture and operation are described. Examples of state-of-the-art vision systems, which include some of the levels of representation and processing mechanisms, are presented.
Barrow, H. G.↗
Vortex-fin interaction on a fighter aircraft
Water tunnel tests have been conducted to study the flow associated with fin buffet for twin-fin fighter aircraft using 1/48th scale F/A-18 models. Flow visualization made use of colored dyes to determine vortex patterns, and surface hot-film anemometry was used to study the turbulent energy and the frequencies present in the flow. Configurations tested include the full aircraft, aircraft without fins, aircraft without leading-edge-extensions, and aircraft without wings. Test Reynolds number ranged from 4300 to 12,800, with corresponding Mach numbers less than 10 to the -6th. The flow studies show that the LEX vortices burst just forward of the fins at about 25-deg angle-of-attack. Hot film anemometer signals show that fin surface turbulence increases with angle of attack, and that dominant frequencies appear in the flow when bursting occurs. The dominant frequencies correspond to a Strouhal number of about 0.7 for all speeds tested, and for all angles of attack for which vortex bursting was present.
Wentz, William H., Jr.↗
Low level remote sensing: Orographic winds
The orographic flow data set was obtained from a flight program to measure the influence of orographic features on turbulence momentum, heat, and moisture fluxes. The NASA B-57 aircraft instrumented with probes for measuring the three fluctuating wind speed components, temperature, and humidity was the primary measuring vehicle. Ancillary measurements were made with several ground-based sensors. These include the NOAA radar wind profilers, the Boulder wind network, the PROFS mesoscale surface network, the Boulder Atmospheric Observatory 300 m tower, special rawinsonde observations, and the NOAA/WPL Doppler lidar. The major objective of the flight program was to provide planetary boundary layer parameter information for new and current general circulation computer models. A numerical code, WINDER, based on a discrete element technique was run to numerically model the water tunnel simulated flow. Comparison of the analytical model with the experimental results is very good. Physical fluid dynamic principles embedded in the computational model and visual and hot wire anemometer measurements from the simulation are being rationalized to develop a physical understanding of the vortex flow. The results will be interpreted as they pertain to full scale atmospheric flows.
Frost, Walter↗
Receptive fields and visual representations
Efficient representation of images for human use requires an understanding of how the brain processes and represents visual information. Spatial imagery is represented in the brain in the receptive fields of visual neurons. Models of these neurons lead to models of image fidelity, and to digital implementations of these neural codes. This approach will be illustrated by two example codes. The advantages and difficulties of this approach will be discussed.
Watson, Andrew B.↗
Aerodynamic control using forebody strakes
Aerodynamic control using a rotatable, miniature nose-tip strake system was investigated in a water tunnel with a forebody model. Flow visualization and yawing moment measurements were performed. The results show that the system was highly effective in controlling the forebody vortices and producing controlled yawing moments at moderate-to-high angles of attack. In comparison with the forebody strakes used in several previous studies, the system can potentially be substantially smaller in size, simpler in operation, and effective over wide ranges of angles of attack and sideslip.
Ng, T. Terry↗
Holographic interferometry at the NASA-Ames Hypervelocity Free-Flight Aerodynamic Facility
A laser holographic interferometer has been designed and developed to improve flow visualization for models in free-flight at high velocities and low freestream static pressures. Of special interest is the flow structure due to high-temperature effects in the post-shock region of models traveling at hypervelocity. A dual-plate technique with a double-pass, Michelson-type configuration has been incorporated in an existing hypervelocity ballistic range. Holograms of 5-deg blunt conical models traveling at 5 km/sec in air at a freestream static pressure of 0.08 atm have been made. Finite- and infinite-fringe interferograms were reconstructed from the holograms and provided qualitative flowfield results. In addition, a digital scanning technique was also used to produce a 'synthetic' infinite-fringe interferogram from the analysis of an experimental finite-fringe interferogram. A 'synthetic' infinite-fringe interferogram shows detail in the wake region not found in the experimental interferograms.
Tam, Tim C.↗
Shape optimization and CAD
Structural optimization has attracted the attention since the days of Galileo. Olhoff and Taylor have produced an excellent overview of the classical research within this field. However, the interest in structural optimization has increased greatly during the last decade due to the advent of reliable general numerical analysis methods and the computer power necessary to use them efficiently. This has created the possibility of developing general numerical systems for shape optimization. Several authors, eg., Esping; Braibant & Fleury; Bennet & Botkin; Botkin, Yang, and Bennet; and Stanton have published practical and successful applications of general optimization systems. Ding and Homlein have produced extensive overviews of available systems. Furthermore, a number of commercial optimization systems based on well-established finite element codes have been introduced. Systems like ANSYS, IDEAS, OASIS, and NISAOPT are widely known examples. In parallel to this development, the technology of computer aided design (CAD) has gained a large influence on the design process of mechanical engineering. The CAD technology has already lived through a rapid development driven by the drastically growing capabilities of digital computers. However, the systems of today are still considered as being only the first generation of a long row of computer integrated manufacturing (CIM) systems. These systems to come will offer an integrated environment for design, analysis, and fabrication of products of almost any character. Thus, the CAD system could be regarded as simply a database for geometrical information equipped with a number of tools with the purpose of helping the user in the design process. Among these tools are facilities for structural analysis and optimization as well as present standard CAD features like drawing, modeling, and visualization tools. The state of the art of structural optimization is that a large amount of mathematical and mechanical techniques are available for the solution of single problems. By implementing collections of the available techniques into general software systems, operational environments for structural optimization have been created. The forthcoming years must bring solutions to the problem of integrating such systems into more general design environments. The result of this work should be CAD systems for rational design in which structural optimization is one important design tool among many others.
Rasmussen, John↗
Nonequilibrium Flow Expansion Experiment Around a Blunted Cone
Eleven tests were carried out in DLR's high enthalpy tunnel in Goettingen (HEG), Germany, for reservoir conditions ranging from 10 to 23 MJ/kg and a free stream Mach number of approximately 10. A blunted cone model with a cylindrical afterbody (sting) was investigated. To obtain information on the influence of defined parameters on the body back flow, especially of the reacting gas, the heat transfer rate along the body contour was measured with fast response surface thermocouples on the forebody and sensitive thin film heat transfer gauges on the base and sting of the model. Flow visualization with a holographic interferometry system was provided. Tests are described, and a preliminary interpretation of the observed flow effects are given.
Kastell, Dirk↗
Attentional limitations with Head-Up Displays
Recent models of visual information processing suggest that visual attention can be focussed on either Head-Up Displays (HUD) or on the world beyond them, but not on both simultaneously. This hypothesis was tested in a part-task simulation in which subjects viewed a simulated approach to a runway with a HUD superimposed. An alphanumeric cue ('IFR' or 'VFR') appeared on either the HUD or the runway and was followed by two sets of three geometric forms; one set on the HUD and one set on the runway. Each set contained one potential target, either a stop sign or a diamond. If the cue spelled 'IFR', subjects made a speeded response based on the identity of the HUD target; if the cue spelled 'VFR', subjects made a speeded response based on the identity of the runway target. Regardless of cue location (HUD or Runway), responses were faster when the cue and the relevant target were part of the same perceptual group (i.e., both on the HUD or both on the runway) than when they were part of different perceptual groups. These results, as well as others, suggest that attentional constraints place severe limits on the ability of pilots to process HUD-referenced information and world-referenced information simultaneously. In addition, they provide direct evidence that transitioning from processing HUD information to processing world information requires an attention shift. Implications for HUD design are considered.
Mccann, Robert S.↗
Ames Research Center Shear Tests of SLA-561V Heat Shield Material for Mars-Pathfinder
This report describes the results of arc-jet testing at Ames Research Center on behalf of Jet Propulsion Laboratory (JPL) for the development of the Mars-Pathfinder heat shield. The current test series evaluated the performance of the ablating SLA-561V heat shield material under shear conditions. In addition, the effectiveness of several methods of repairing damage to the heat shield were evaluated. A total of 26 tests were performed in March 1994 in the 2 in. X 9 in. arc-heated turbulent Duct Facility, including runs to calibrate the facility to obtain the desired shear stress conditions. A total of eleven models were tested. Three different conditions of shear and heating were used. The non-ablating surface shear stresses and the corresponding, approximate, non-ablating surface heating rates were as follows: Condition 1, 170 N/m(exp 2) and 22 W/cm(exp 2); Condition 2, 240 N/m(exp 2) and 40 W/cm(exp 2); Condition 3, 390 N/m(exp 2) and 51 W/cm(exp 2). The peak shear stress encountered in flight is represented approximately by Condition 1; however, the heating rate was much less than the peak flight value. The peak heating rate that was available in the facility (at Condition 3) was about 30 percent less than the maximum value encountered during flight. Seven standard ablation models were tested, of which three models were instrumented with thermocouples to obtain in-depth temperature profiles and temperature contours. An additional four models contained a variety of repair plugs, gaps, and seams. These models were used to evaluated different repair materials and techniques, and the effect of gaps and construction seams. Mass loss and surface recession measurements were made on all models. The models were visually inspected and photographed before and after each test. The SLA-561 V performed well; even at test Condition 3, the char remained intact. Most of the resins used for repairs and gap fillers performed poorly. However, repair plugs made of SLA-561V performed well. Approximately 70 percent of the thermocouples yielded good data.
Tauber, Michael↗
Space-based Operations Grid Prototype
The Space based Operations Grid is intended to integrate the "high end" network services and compute resources that a remote payload investigator needs. This includes integrating and enhancing existing services such as access to telemetry, payload commanding, payload planning and internet voice distribution as well as the addition of services such as video conferencing, collaborative design, modeling or visualization, text messaging, application sharing, and access to existing compute or data grids. Grid technology addresses some of the greatest challenges and opportunities presented by the current trends in technology, i.e. how to take advantage of ever increasing bandwidth, how to manage virtual organizations and how to deal with the increasing threats to information technology security. We will discuss the pros and cons of using grid technology in space-based operations and share current plans for the prototype. It is hoped that early on the prototype can incorporate many of the existing as well as future services that are discussed in the first paragraph above to cooperating International Space Station Principle Investigators both nationally and internationally.
Bradford, Robert N.↗