Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Turbulent Mixing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

Comparison of High-Order and Low-Order Methods for Large-Eddy Simulation of a Compressible Shear Layer

The objective of this work is to compare a high-order solver with a low-order solver for performing Large-Eddy Simulations (LES) of a compressible mixing layer. The high-order method is the Wave-Resolving LES (WRLES) solver employing a Dispersion Relation Preserving (DRP) scheme. The low-order solver is the Wind-US code, which employs the second-order Roe Physical scheme. Both solvers are used to perform LES of the turbulent mixing between two supersonic streams at a convective Mach number of 0.46. The high-order and low-order methods are evaluated at two different levels of grid resolution. For a fine grid resolution, the low-order method produces a very similar solution to the highorder method. At this fine resolution the effects of numerical scheme, subgrid scale modeling, and filtering were found to be negligible. Both methods predict turbulent stresses that are in reasonable agreement with experimental data. However, when the grid resolution is coarsened, the difference between the two solvers becomes apparent. The low-order method deviates from experimental results when the resolution is no longer adequate. The high-order DRP solution shows minimal grid dependence. The effects of subgrid scale modeling and spatial filtering were found to be negligible at both resolutions. For the high-order solver on the fine mesh, a parametric study of the spanwise width was conducted to determine its effect on solution accuracy. An insufficient spanwise width was found to impose an artificial spanwise mode and limit the resolved spanwise modes. We estimate that the spanwise depth needs to be 2.5 times larger than the largest coherent structures to capture the largest spanwise mode and accurately predict turbulent mixing.

large eddy simulations↗
NASA NTRS1979

Large Eddy Simulation of turbulent shear flows

The conceptual foundation underlying Large Eddy Simulation (LES) is summarized, and the numerical methods developed for simulation of the time-developing turbulent mixing layer and turbulent plane Poiseuille flow are discussed. Computational results show that the average Reynolds stress profile nearly attains the equilibrium shape which balances the downstream mean pressure gradient in the regions away from the walls. In the vicinity of the walls, viscous stresses are shown to be significant; together with the Reynolds stresses, these stresses balance the mean pressure gradient. It is stressed that the subgrid scale contribution to the total Reynolds stress is significant only in the vicinity of the walls. The continued development of LES is urged.

Moin, P.↗
NASA NTRS1984

Numerical simulation of turbulent flows

Computational models of turbulence in incompressible Newtonian fluids governed by the Navier-Stokes equations are reviewed. The governing equations are presented, and both direct and large-eddy-simulations are examined. Resolution requirements and numerical techniques of spatial representation, definition of initial and boundary conditions, and time advancement are considered. Results of simulations of homogeneous turbulence in uniform shear, the evolution of a turbulent mixing layer, and turbulent channel flow are presented graphically and discussed.

Rogallo, R. S.↗
DOE OSTI2023

Effects of Lower Troposphere Vertical Mixing on Simulated Clouds and Precipitation Over the Amazon During the Wet Season

Planetary boundary layer (PBL) schemes parameterize unresolved turbulent mixing within the PBL and free troposphere (FT). Previous studies reported that precipitation simulation over the Amazon in South America is quite sensitive to PBL schemes and the exact relationship between the turbulent mixing and precipitation processes is, however, not disentangled. In this study, regional climate simulations over the Amazon in January–February 2019 are examined at process level to understand the precipitation sensitivity to PBL scheme. The focus is on two PBL schemes, the Yonsei University (YSU) scheme, and the asymmetric convective model v2 (ACM2) scheme, which show the largest difference in the simulated precipitation. During daytime, while the FT clouds simulated by YSU dissipate, clouds simulated by ACM2 maintain because of enhanced moisture supply due to the enhanced vertical moisture relay transport process: (a) vertical mixing within PBL transports surface moisture to the PBL top, and (b) FT mixing feeds the moisture into the FT cloud deck. Due to the thick cloud deck over Amazon simulated by ACM2, surface radiative heating is reduced and consequently the convective available potential energy is reduced. As a result, precipitation is weaker from ACM2. Two key parameters dictating the vertical mixing are identified, p , an exponent determining boundary layer mixing and λ , a scale dictating FT mixing. Sensitivity simulations with altered p , λ , and other treatments within YSU and ACM2 confirm the precipitation sensitivity. The FT mixing in the presence of clouds appears most critical to explain the sensitivity between YSU and ACM2.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2004

A Variable Turbulent Schmidt Number Formulation for Scramjet Application

In high speed engines, thorough turbulent mixing of fuel and air is required to obtain high performance and high efficiency. Thus, the ability to predict turbulent mixing is crucial in obtaining accurate numerical simulation of an engine and its performance. Current state of the art in CFD simulation is to assume both turbulent Prandtl number and Schmidt numbers to be constants. However, since the mixing of fuel and air is inversely proportional to the Schmidt number, a value of 0.45 for the Schmidt number will produce twice as much diffusion as that with a value of 0.9. Because of this, current CFD tools and models have not been able to provide the needed guidance required for the efficient design of a scramjet engine. The goal of this investigation is to develop the framework needed to calculate turbulent Prandtl and Schmidt numbers as part of the solution. This requires four additional equations: two for the temperature variance and its dissipation rate and two for the concentration variance and its dissipation rate. In the current investigation emphasis will be placed on studying mixing without reactions. For such flows, variable Prandtl number does not play a major role in determining the flow. This, however, will have to be addressed when combustion is present. The approach to be used is similar to that used to develop the k-zeta model. In this approach, relevant equations are derived from the exact Navier-Stokes equations and each individual correlation is modeled. This ensures that relevant physics is incorporated into the model equations. This task has been accomplished. The final set of equations have no wall or damping functions. Moreover, they are tensorially consistent and Galilean invariant. The derivation of the model equations is rather lengthy and thus will not be incorporated into this abstract, but will be included in the final paper. As a preliminary to formulating the proposed model, the original k-zeta model with constant turbulent Prandtl and Schmidt numbers is used to model the supersonic coaxial jet mixing experiments involving He, O2 and air.

Xiao, X.↗
NASA NTRS1993

LIF measurements of scalar mixing in turbulent shear layers

The structure of shear layer flows at high Reynolds numbers remains a very interesting problem. Straight mixing layers have been studied and yielded information on the probability density function (pdf) of a passive scalar across the layer. Konrad and Koochesfahani & Dimotakis measured the pdf of the mixture fraction for mixing layers of moderate Reynolds numbers, each about 25,000 (Re based on velocity difference and visual thickness). Their measurements showed a 'non-marching' pdf (central hump which is invariant from edge to edge across the layer), a result which is linked to the visualizations of the spanwise Kelvin-Helmholtz (K-H) instability mode, which is the primary instability for plane shear layer flows. A secondary instability mode, the Taylor-Gortler (T-G) instability, which is associated with streamwise vortical structures, has also been observed in shear layers. Image reconstruction by Jimenez et al. and volume renderings by Karasso & Mungal at low Re numbers have demonstrated that the K-H and the T-G instability modes occur simultaneously in a non-mutually destructive way, evidence that supports the quasi two-dimensional aspect of these flows and the non-marching character of the pdf at low Reynolds numbers. At higher Re numbers though, the interaction of these two instability modes is still unclear and may affect the mixing process. In this study, we perform measurements of the concentration pdf of plane mixing layers for different operating conditions. At a speed ratio of r = U(sub 1)/U(sub 2) = 4:1, we examine three Reynolds number cases: Re = 14,000, Re = 31,000, and Re = 62,000. Some other Re number cases' results, not presented in detail, are invoked to explain the behavior of the pdf of the concentration field. A case of r = 2.6:1 at Re = 20,000 is also considered. The planar laser-induced fluorescence technique is used to yield quantitative measurements. The different Re are obtained by changing the velocity magnitudes of the two streams. The question of resolution of these measurements is addressed. In order to investigate the effects of the initial conditions on the development and the structure of the mixing layer, the boundary layer on the high-speed side of the splitter plate is tripped. The average concentration and the average mixed fluid concentration are also calculated to further understand the changes in the shear layer for the different cases examined.

Karasso, Paris S.↗
NASA NTRS2000

Mapping Closure Approximation to Conditional Dissipation Rate for Turbulent Scalar Mixing

A novel mapping closure approximation (MCA) technique is developed to construct a model for the conditional dissipation rate (CDR) of a scalar in homogeneous turbulence. It is shown that the CDR model from amplitude mapping closure is incorrect in asymptotic behavior for unsymmetric binary mixing. The correct asymptotic behavior can be described by the CDR model formulated by the MCA technique. The MCA approach is outlined for constructing successive approximation to probability density function (PDF) and conditional moment.

He, Gouwei↗
DOE OSTI2022

Flow regime and Reynolds number variation effects on the mixing behavior of parallel flows

The hydraulic single-phase mixing of three parallel rectangular channels is experimentally investigated at various Reynolds numbers (Re) and flow regime combinations. Particle Image Velocimetry results for seven mixing cases are presented and discussed with varying Re combinations ranging from 1,824 to 20,844. While all cases result in the same Re ratio of ~0.69 between the inner and outer flows, two cases represent multi-regime mixing with the inner-outer regime pair of laminar-transitional and transitional-turbulent, while the other 5 cases are all characteristic of turbulent mixing with varying levels of turbulence. The outer channels initially share characteristics with a backward facing step. The center channel is found to initially behave like a slot jet, but then sees a significant increase in velocity decay. This inner flow velocity decay increased dramatically in the laminar-transitional mixing case, whose centerline velocity decay was ~6 times larger than the decay in the turbulent mixing cases. Second order statistics revealed a consistent mixing layer thickness of ~0.1 hydraulic diameters for all the cases but showed more intense shearing in the multi-regime mixing cases. The combined point and thereby the mixing layer length is determined using centerline velocity decay profiles, which show a much more aggressive mixing in multi-regime flows. Multi-regime mixing demonstrated superior characteristics relative to turbulent mixing due to a more dramatic velocity decay in the inner flow and a shorter mixing length. The contributions of this work include communicating the benefits of multi-regime mixing and providing detailed characterization efforts that can serve future efforts for validating computational models. Here this research also lays the groundwork for future studies aimed at achieving high levels of mixing without a severe penalty in pressure drop.

42 ENGINEERING↗
DOE OSTI2025

Freestream turbulence effects on unsteady wind turbine loads and wakes: An IDDES study

We investigate numerically the effects of freestream turbulence on the unsteady aerodynamics and wakes of the National Renewable Energy Laboratory Phase VI wind turbine rotor for increasing wind speed. Turbulence is modeled using the Improved Delayed Detached-Eddy Simulation (IDDES) method. As a first step, a detailed mesh resolution study is conducted with the decaying freestream turbulence model at turbulence intensity of 0.5%. Our blade-resolved IDDES simulations show that grid-independent average torque and thrust results can be achieved with relatively coarse meshes, whereas dramatically higher mesh resolution is required for grid-independent results for power spectral densities of thrust force, especially in the deep-stall regime. Comparing the loads with the Shear-Stress Transport model demonstrates the superiority of IDDES in predicting massively separated flows. The aerodynamic performance and wake predictions with the decaying freestream turbulence model are compared with the synthetic freestream turbulence model. Both models predict nearly the same loads, spectral energy content, and wake characteristics. The properties of both the near- and far-wake regions are then examined. Furthermore, we show that separated boundary layers accelerate turbulent mixing and entrainment of the external flow, which results in faster wake recovery. The effect of increasing turbulence intensity to 6% is investigated using the synthetic freestream turbulence model. In contrast with the fully attached boundary layer, higher freestream turbulence in deep stall does not significantly affect the loads and vortex-shedding characteristics. However, the turbulent mixing in the wake is enhanced, which further hastens the recovery of the self-similar velocity profile. In general, increasing the wind speed at high turbulence intensity shifts the recovery farther upstream and increases the wake width.

17 WIND ENERGY↗
NASA NTRS1976

Modeling of three-dimensional mixing and reacting ducted flows

A computer code based on a finite-element solution algorithm is developed to perform an analytical investigation on the turbulent mixing and reaction of hydrogen jets injected from multiple orifices transverse and parallel to a supersonic airstream. A laser optical cavity flow field was also analyzed to demonstrate the generality of the proposed model. Computational results provide a three-dimensional description of velocity, temperature, and species-concentration fields downstream of injection. Major conclusions are that the analysis has immediate utility in evaluating the mixing effectiveness of transverse H2 injection data since it has been tested in its ability to model this type of data and that turbulent mixing length theory, constant effective Prandtl number, and a Lewis number of unity provide reasonable agreement with transverse H2 injection data downstream of the near-injection region. Efforts are presently being directed toward using the code in modeling laser and scramjet data for a wide range of flow conditions.

Zelazny, S. W.↗
DOE OSTI2025

Evaluating mesoscale model predictions of diurnal speedup events in the Altamont Pass Wind Resource Area of California

Mesoscale model predictions of wind, turbulence, and wind energy capacity factors are evaluated in the Altamont Pass Wind Resource Area of California (APWRA), where the diurnal regional sea breeze and associated terrain-driven speedup flows drive wind energy production during the summer months. Results from the Weather Research and Forecasting model version 4.4 using a novel three-dimensional planetary boundary layer (3D PBL) scheme, which treats both vertical and horizontal turbulent mixing, are compared to those using a well-established one-dimensional (1D) scheme that treats only vertical turbulent mixing. Each configuration is evaluated over a nearly 3-month-long period during the Hill Flow Study, and due to the recurring nature of the observed speedup flows, diurnal composite averaging is used to capture robust trends in model performance. Both model configurations showed similar overall skill. The general timing and direction of the speedup flows is captured, but their magnitude is overestimated within a typical wind turbine rotor layer. Both also fail to capture a persistent observed near-surface jet-like flow, likely due to the limited grid resolution that is typical of mesoscale models. However, the 3D PBL configuration shows several minor improvements over the 1D PBL configuration, including improved wind speed and turbulence kinetic energy profiles during the accelerating phase of the speedup events, as well as reduced positive wind speed bias at surface stations across the APWRA region. Using a mesoscale wind farm parameterization, modeled capacity factors are also compared to monthly data reported to the US Energy Information Administration (EIA) during the study period. Although the monthly trend in the data is captured, both model configurations overestimate capacity factors by roughly 7 %–11 %. Through model evaluation, this study provides confidence in the 3D PBL scheme for wind energy applications in complex terrain and provides guidance for future testing.

17 WIND ENERGY↗
NASA NTRS1978

Turbulent wake/shock interaction at Mach 6

The paper presents measurements of mean pitot, static pressure and total temperature profiles for a two-dimensional turbulent wake in the vicinity and downstream of intersection with a shock/expansion wave system. The wake centerline Mach number, velocity, and total temperature distributions indicated that the shock increased turbulent mixing, while the expansion field that followed the shock decreased mixing. The overall effect of the shock/expansion wave interaction was to increase mixing for shock angles 15 deg and less for the shock generator geometry used in the present study. Wake growth rates determined from the total temperature profiles confirmed the increased turbulent mixing effect of the shock. These data could be used to validate nonquilibrium turbulence modeling and numerical solution of the time-averaged Navier-Stokes equations.

Walsh, M. J.↗
NASA NTRS2015

Comparison of High-Order and Low-Order Methods for Large-Eddy Simulation of a Compressible Shear Layer

The objective of this work is to compare a high-order solver with a low-order solver for performing large-eddy simulations (LES) of a compressible mixing layer. The high-order method is the Wave-Resolving LES (WRLES) solver employing a Dispersion Relation Preserving (DRP) scheme. The low-order solver is the Wind-US code, which employs the second-order Roe Physical scheme. Both solvers are used to perform LES of the turbulent mixing between two supersonic streams at a convective Mach number of 0.46. The high-order and low-order methods are evaluated at two different levels of grid resolution. For a fine grid resolution, the low-order method produces a very similar solution to the high-order method. At this fine resolution the effects of numerical scheme, subgrid scale modeling, and filtering were found to be negligible. Both methods predict turbulent stresses that are in reasonable agreement with experimental data. However, when the grid resolution is coarsened, the difference between the two solvers becomes apparent. The low-order method deviates from experimental results when the resolution is no longer adequate. The high-order DRP solution shows minimal grid dependence. The effects of subgrid scale modeling and spatial filtering were found to be negligible at both resolutions. For the high-order solver on the fine mesh, a parametric study of the spanwise width was conducted to determine its effect on solution accuracy. An insufficient spanwise width was found to impose an artificial spanwise mode and limit the resolved spanwise modes. We estimate that the spanwise depth needs to be 2.5 times larger than the largest coherent structures to capture the largest spanwise mode and accurately predict turbulent mixing.

large eddy simulations↗
NASA NTRSDate not supplied

Large Eddy Simulations of Upper-Ocean Turbulence Across the Equatorial Pacific Cold Tongue

Turbulence in the equatorial Pacific cold tongue plays multiple roles in the sea-surface temperature budget. However, observations of turbulence are limited to a handful of field experiments lasting from a few days to one month at 0 N , 140 W, and the key turbulent fluxes can only be inferred. Although explicit simulations of turbulence resolve these fluxes, the required large eddy simulations (LES) are costly and thus also limited to a few weeks. A two-fold hypothesis motivates this contribution to the PUMP pre-field modelling experiments in support of TPOS: 1) that there exist useful relationships between the surface wind, wave, and buoyancy forcing, oceanic shear and stratification, and turbulent mixing, but 2) these relationships differ between regions of equatorial dynamics (f~0) and higher latitudes, such that the state space is insufficiently sampled to understand these relationships and represent them in ocean general circulation models (OGCM). To address the lack of observations, we simulated 35 continuous days of upper ocean turbulence using LES during October-November 1985 at sites in two regions (70 days in total) of the cold tongue: 0 N, 140 W and 3 N, 140 W. The model reproduces many features of the observed turbulence at 0,140W, including the “deep-cycle” observed by Gregg et al. (1985) Nature and the turbulent pulses every few hours during the night and in the early morning. Furthermore, the results at 3 N support the hypothesis advanced by Cherian et al. (2021) JPO that strong, but intermittent deep-cycle turbulence is observed to the north of the equator in the presence of strong shear associated with Tropical Instability Waves. Comparisons with the K-profile parameterization (KPP) scheme show that additional tuning of the KPP parameters can reduce differences between the turbulent fluxes produced by KPP and LES at both sites. The results will suggest modifications to OGCMs and already emphasize the need for a more extensive measurements of vertical profiles of shear, stratification and turbulent mixing to reveal the spatio-temporal structure of turbulence and how it relates to forcing, shear and stratification across the equatorial Pacific Cold tongue.

Large Eddy Simulations↗
DOE OSTI2022

Self-similarity of scalar isosurface area density in a temporal mixing layer

Understanding the behaviour of scalar isosurfaces in a turbulent flow is of particular interest for many problems in turbulent mixing that contain sharp interfaces between regions of the flow. Common examples include combustion, where the chemical reactions occur in thin regions within the flow, and the turbulent/non-turbulent interface in shear flows, where a thin region separates the rotational, turbulent motions from the irrotational, non-turbulent background. Recent advances in computing technology allow for in-depth analysis of these interface problems that are difficult to quantify in a laboratory setting. In this paper, the results of a direct numerical simulation of a passive scalar $\varPhi$ evolving on a turbulent, temporally developing mixing layer are described. A novel approach has been taken to calculate the surface area of individual scalar isosurfaces, $A_{iso}$ , throughout the simulation, as well as the mean isosurface area density, $\varSigma$ , as a function of the cross-stream direction and time. A notable finding is that the profiles of $\varSigma$ develop in a self-similar manner when scaled by the Taylor scale of the scalar field, $\lambda _\phi$ . Remarkably, the scaling appears to hold for a wide range of isovalues. A rough scaling argument based on the formal definition of $\varSigma$ and properties of a temporal mixing layer is presented which also exposes a dependence on $\lambda _\phi$ . Based on these results, a possible scaling for the isosurface area is presented as $A_{iso}/A_0 \sim (Re \, Sc)^{1/2}$ , where $Re$ and $Sc$ are local Reynolds and Schmidt numbers, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1976

Sound generated in the vicinity of the trailing edge of an upper surface blown flap

Far-field noise data indicated that for practical upper surface blown flap configurations, the noise radiated below the flap is dominated by the noise generated in the vicinity of the trailing edge. Sound field by turbulent mixing in the trailing edge wake is investigated experimentally and theoretically. Hot-wire measurements were made downstream of the trailing edge to determine the gross turbulence mixing characteristics of the flow. This information is used as input to a theoretical analysis of the sound field. Favorable agreement is found between predicted and measured far-field noise directivities at various frequencies and noise power spectra at various directions.

Tam, C. K. W.↗
NASA NTRS1987

Small-scale physics of the ocean

Observations and theoretical models of small-scale phenomena in the oceans are reviewed, with a focus on progress during the period 1983-1986. Topics examined include surface layers, equatorial turbulence, off-equator mixed layers, the scaling of mixing, turbulence concepts, laboratory results, internal waves and mixing, rings, the nature of the bottom layer, double diffusion and intrusions, salt fingers, and biological interactions. Also discussed are developments in instrumentation (fast sampling profilers with upward-profiling capability, deep profilers, ship-motion correction, horizontal samplers, small submersibles, submarines, towed packages, conductivity sensors, dissolved-oxygen sensors, and acoustic Doppler current profilers) and goals for future research.

Caldwell, Douglas R.↗