Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transversity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Transverse Pupil Shifts for Adaptive Optics Non-Common Path Calibration

A simple new way of obtaining absolute wavefront measurements with a laboratory Fizeau interferometer was recently devised. In that case, the observed wavefront map is the difference of two cavity surfaces, those of the mirror under test and of an unknown reference surface on the Fizeau s transmission flat. The absolute surface of each can be determined by applying standard wavefront reconstruction techniques to two grids of absolute surface height differences of the mirror under test, obtained from pairs of measurements made with slight transverse shifts in X and Y. Adaptive optics systems typically provide an actuated periscope between wavefront sensor (WFS) and commonmode optics, used for lateral registration of deformable mirror (DM) to WFS. This periscope permits independent adjustment of either pupil or focal spot incident on the WFS. It would be used to give the required lateral pupil motion between common and non-common segments, analogous to the lateral shifts of the two phase contributions in the lab Fizeau. The technique is based on a completely new approach to calibration of phase. It offers unusual flexibility with regard to the transverse spatial frequency scales probed, and will give results quite quickly, making use of no auxiliary equipment other than that built into the adaptive optics system. The new technique may be applied to provide novel calibration information about other optical systems in which the beam may be shifted transversely in a controlled way.

Bloemhof, Eric E.↗
NASA NTRS2012

Computational Implementation of a Thermodynamically Based Work Potential Model For Progressive Microdamage and Transverse Cracking in Fiber-Reinforced Laminates

A continuum-level, dual internal state variable, thermodynamically based, work potential model, Schapery Theory, is used capture the effects of two matrix damage mechanisms in a fiber-reinforced laminated composite: microdamage and transverse cracking. Matrix microdamage accrues primarily in the form of shear microcracks between the fibers of the composite. Whereas, larger transverse matrix cracks typically span the thickness of a lamina and run parallel to the fibers. Schapery Theory uses the energy potential required to advance structural changes, associated with the damage mechanisms, to govern damage growth through a set of internal state variables. These state variables are used to quantify the stiffness degradation resulting from damage growth. The transverse and shear stiffness of the lamina are related to the internal state variables through a set of measurable damage functions. Additionally, the damage variables for a given strain state can be calculated from a set of evolution equations. These evolution equations and damage functions are implemented into the finite element method and used to govern the constitutive response of the material points in the model. Additionally, an axial failure criterion is included in the model. The response of a center-notched, buffer strip-stiffened panel subjected to uniaxial tension is investigated and results are compared to experiment.

Pineda, Evan J.↗
NASA NTRS2020

Experimental Reexamination of Transverse Tensile Strength for IM7/8552 Tape-Laminate Composites

Due to the observed dependence of transverse-tensile strength, YT, on test geometry and specimen size, there is no consensus regarding a test method that can uniquely measure YT. This study reexamines characterization of YT by comparing results from established flexure tests with results from a new tensile test that exhibits consistent failure in the gage region. Additionally, the effects of surface preparation and direction of transverse fracture are investigated. Results show that YT is inversely proportional to specimen volume and surface roughness, and is insensitive to direction of transverse fracture. The relationship between specimen volume and YT is adequately captured by Weibull strength-scaling theory, except at the tails of the YT distributions. However, specimens exhibited microcracking prior to failure, which violates the “weak-link” assumptions of the Weibull theory. These findings highlight the challenges of using deterministic YT values in progressive damage analysis.

Arndt, Caitlin M.↗
NASA NTRSDate not supplied

Investigating Transverse Ply Thickness and Cracking Effects on the Tensile Strain to Failure of Thin-ply, Cross-ply Carbon Composites using X-ray Computed Tomography

The effect of 90°-ply thickness on the fibre direction tensile failure strain of cross-ply laminates was investigated by designing four different cross-ply composite laminate configurations with 90° blocks of varying numbers of plies adjacent to a central block of 0° plies. The range of 90° block thicknesses evaluated included conventional ply thicknesses to allow for comparisons with conventional ply geometries. The central 0° ply block was subjected to primarily longitudinal tension with a small component of transverse tension due to the layup and thermal residual stresses. Advanced instrumentation, including acoustic emission and X-ray computed tomography, was used to detect and visualize damage accumulation in the specimens. It was found that decreasing the thickness of the 90° ply blocks reduced transverse matrix microcracking up to the point where no full-width transverse cracks developed prior to ultimate failure. A small degradation of the fibre direction failure strain in the central 0° plies was found as the 90°-layer thickness increased in the laminates, which corresponded with the development of edge/transverse cracks.

Tamas Rev↗
DOE OSTI2025

Energy-scaling behavior of intrinsic transverse-momentum parameters in Drell-Yan simulation

An analysis is presented based on models of the intrinsic transverse momentum (intrinsic 𝑘 T ) of partons in nucleons by studying the dilepton transverse momentum in Drell-Yan events. Using parameter tuning in event generators and existing data from fixed-target experiments and from hadron colliders, our investigation spans 3 orders of magnitude in center-of-mass energy and 2 orders of magnitude in dilepton invariant mass. The results show an energy-scaling behavior of the intrinsic 𝑘 T parameters, independent of the dilepton invariant mass at a given center-of-mass energy.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Transverse single-spin asymmetries in $γ$ SIDIS as a direct probe of quark-gluon-quark longitudinal momentum structure

Transverse single-spin asymmetries in the semi-inclusive deep-inelastic production of isolated photons ($\gamma$SIDIS), $A_{UT}^{\gamma {\rm SIDIS}}$, provide an unprecedented opportunity to extract the quark-gluon-quark correlators $F_{FT}(x,x')$ and $G_{FT}(x,x')$ point-by-point in their full support $x,x'$. We utilize realistic models for these functions, based on input from the Sivers transverse momentum dependent parton distribution function and imposing constraints from the $d_2$ matrix element calculated in lattice QCD, in order to provide numerical estimates for $A_{UT}^{\gamma {\rm SIDIS}}$ at the Electron-Ion Collider (EIC). We thoroughly explore the EIC phase space in order to isolate in which regions the asymmetry can be sizable, finding it can be as much as $10\%$ or larger for certain kinematics. Given that $F_{FT}(x,x')$ and $G_{FT}(x,x')$ are basically unknown, $A_{UT}^{\gamma {\rm SIDIS}}$ will be an important future measurement to learn about multi-parton correlations in the nucleon.

Electron-Ion Collider↗
DOE OSTI2022

Adiabatic and isothermal configurations for Re 4 Si 7 transverse thermoelectric power generators

We report that transverse thermoelectric generators (TTEGs) have the potential to overcome two challenging problems that limit the commercial application of classical thermoelectric generators (TEGs): the significant irreversible efficiency losses in the contacts and the thermal degradation of the contacts at the hot end. TTEGs are built from a single material that can generate a thermoelectric current in a direction that is orthogonal to a temperature gradient. They only require a single set of contacts that are displaced away from the hot end. Here, we experimentally explore the device design considerations for optimizing the performance of this far less explored class of thermal-to-electric generation devices. We fabricate Re 4 Si 7 TTEGs and show that there is no measurable loss in efficiency with a single set of contacts that are midway between the hot and cold ends. We show that a new effect must be considered: the appearance of transverse thermal gradients that lead to significant differences between the performance of TTEGs implemented in isothermal and adiabatic geometries. The isothermal TTEG configuration leads to much higher device efficiencies. Overall, this work highlights how different the design of TTEGs is from that of conventional TEGs and the importance of controlling the device geometry for optimum waste heat recovery.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Shaping Micro-Bunched Electron Beams for Compact X-ray Free-Electron Lasers with Transverse Gradient Undulators

Laser-modulator-based micro-bunching of electron beams has been applied to many novel operating modes of X-ray free-electron lasers from harmonic generation to attosecond pulse production. Recently, it was also identified as a key enabling technology for the production of a compact XFEL driven by a relatively low-energy beam. In traditional laser modulator schemes with low-energy and high-current bunches, collective effects limit the possible working points that can be employed, and thus it is difficult to achieve optimal XFEL performance. We propose to utilize transverse longitudinal coupling in a transverse gradient undulator (TGU) to shape micro-bunched electron beams so as to optimize their performance in a compact X-ray free-electron laser. We show that a TGU added to a conventional laser modulator stage enables much more flexibility in the design, allowing one to generate longer micro-bunches less subject to slippage effects and even lower the slice emittance of the micro-bunches. We present a theoretical analysis of laser-based micro-bunching with an added TGU, simulation of compression with collective effects in such systems, and finally XFEL simulations demonstrating the gains in peak power enabled by the TGU. Although we focus on the application to compact XFELs, what we propose is a general phase space manipulation that may find utility in other applications as well.

eSASE↗
DOE OSTI2022

Search for exotic decays of the Higgs boson into $b\bar{b}$ and missing transverse momentum in $pp$ collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

A search for the exotic decay of the Higgs boson (H) into a $b\bar{b}$ resonance plus missing transverse momentum is described. The search is performed with the ATLAS detector at the Large Hadron Collider using 139 fb -1 of pp collisions at $\sqrt{s}$ = 13 TeV. The search targets events from $ZH$ production in an NMSSM scenario where H → $\tilde{χ}^0_2\tilde{χ}^0_1$, with $\tilde{χ}^0_2$ → a$\tilde{χ}^0_1$, where a is a light pseudoscalar Higgs boson and $\tilde{χ}^0_{1,2}$ are the two lightest neutralinos. The decay of the a boson into a pair of b-quarks results in a peak in the dijet invariant mass distribution. The final-state signature consists of two leptons, two or more jets, at least one of which is identified as originating from a b-quark, and missing transverse momentum. Observations are consistent with Standard Model expectations and upper limits are set on the product of cross section times branching ratio for a three-dimensional scan of the masses of the $\tilde{χ}^0_2\tilde{χ}^0_1$ and a boson.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Measurement of double-parton scattering in inclusive production of four jets with low transverse momentum in proton-proton collisions at $\sqrt{s}$ = 13 TeV

A measurement of inclusive four-jet production in proton-proton collisions at a center-of-mass energy of 13 TeV is presented. The transverse momenta of jets within |η| < 4.7 are required to exceed 35, 30, 25, and 20 GeV for the first-, second-, third-, and fourth-leading jet, respectively. Differential cross sections are measured as functions of the jet transverse momentum, jet pseudorapidity, and several other observables that describe the angular correlations between the jets. The measured distributions show sensitivity to different aspects of the underlying event, parton shower modeling, and matrix element calculations. In particular, the interplay between angular correlations caused by parton shower and double-parton scattering contributions is shown to be important. The double-parton scattering contribution is extracted by means of a template fit to the data, using distributions for single-parton scattering obtained from Monte Carlo event generators and a double-parton scattering distribution constructed from inclusive single-jet events in data. The effective double-parton scattering cross section is calculated and discussed in view of previous measurements and of its dependence on the models used to describe the single- parton scattering background.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

An effective field theory approach to quarkonium at small transverse momentum

In this work we apply effective field theory (EFT) to observables in quarkonium production and decay that are sensitive to soft gluon radiation, in particular measurements that are sensitive to small transverse momentum. Within the EFT framework we study χQ decay to light quarks followed by the fragmentation of those quarks to light hadrons. We derive a factorization theorem that involves transverse momentum distribution (TMD) fragmentation functions and new quarkonium TMD shape functions. We derive renormalization group equations, both in rapidity and virtuality, which are used to evolve the different terms in the factorization theorem to resum large logarithms. This theoretical framework will provide a systematic treatment of quarkonium production and decay processes in TMD sensitive measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Search for signatures of electroweakinos with photons, jets, and large missing transverse momentum in s=13 TeV pp collisions with the ATLAS detector

A search for final states characterised by at least one isolated high transverse-momentum photon, jets and large missing transverse momentum is presented. Such a final state might occur in gauge-mediated supersymmetric models where a pair of binos and higgsinos mix to form neutralinos, one of which decays into a photon plus a gravitino while the other decays into a Higgs boson, a Z boson or a photon, plus a gravitino. The search is performed using the full Run-2 data sample of 140 fb−1 of s=13$$ \sqrt{s}=13 $$ TeV proton-proton collisions collected by the ATLAS detector at the Large Hadron Collider. No significant excess of events is observed above the Standard Model prediction and model-dependent exclusion limits at the 95% confidence level are set. These limits are interpreted in terms of the masses of gauginos, which are excluded up to 1.2 TeV depending on their branching ratios, and on their branching ratios as a function of their mass.

Aad, G↗
DOE OSTI2024

Light-flavor particle production in high-multiplicity pp collisions at $\sqrt{\textrm{s}}$ = 13 TeV as a function of transverse spherocity

Results on the transverse spherocity dependence of light-flavor particle production (π, K, p, ϕ, K *0 , K$^{0}_{S}$, Λ, Ξ) at midrapidity in high-multiplicity pp collisions at $\sqrt{\textrm{s}}$ = 13 TeV were obtained with the ALICE apparatus. The transverse spherocity estimator ($S$$^{p_T=1}_{O}$) categorizes events by their azimuthal topology. Utilizing narrow selections on $S$$^{p_T=1}_{O}$, it is possible to contrast particle production in collisions dominated by many soft initial interactions with that observed in collisions dominated by one or more hard scatterings. Results are reported for two multiplicity estimators covering different pseudorapidity regions. The $S$$^{p_T=1}_{O}$ estimator is found to effectively constrain the hardness of the events when the midrapidity (|η| < 0.8) estimator is used.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Search for new particles in final states with a boosted top quark and missing transverse momentum in proton-proton collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

A search for events with one top quark and missing transverse momentum in the final state is presented. The fully hadronic decay of the top quark is explored by selecting events with a reconstructed boosted top-quark topology produced in association with large missing transverse momentum. The analysis uses 139 fb -1 of proton-proton collision data at a centre-of-mass energy of $\sqrt{s}$ = 13 TeV recorded during 2015-2018 by the ATLAS detector at the Large Hadron Collider. The results are interpreted in the context of simplified models for Dark Matter particle production and the single production of a vector-like T quark. Without significant excess relative to the Standard Model expectations, 95% confidence-level upper limits on the corresponding cross-sections are obtained. The production of Dark Matter particles in association with a single top quark is excluded for masses of a scalar (vector) mediator up to 4.3 (2.3) TeV, assuming m χ = 1 GeV and the model couplings λ q = 0.6 and λ χ = 0.4 (a = 0.5 and g χ = 1). The production of a single vector-like T quark is excluded for masses below 1.8 TeV assuming a coupling to the top quark κ T = 0.5 and a branching ratio for T → Zt of 25%.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Measurements of differential cross-sections in top-quark pair events with a high transverse momentum top quark and limits on beyond the Standard Model contributions to top-quark pair production with the ATLAS detector at $ \sqrt{s} $ = 13 TeV

Cross-section measurements of top-quark pair production where the hadronically decaying top quark has transverse momentum greater than 355 GeV and the other top quark decays into ℓνb are presented using 139 fb –1 of data collected by the ATLAS experiment during proton-proton collisions at the LHC. The fiducial cross-section at √s = 13 TeV is measured to be σ = 1.267 ± 0.005 ± 0.053 pb, where the uncertainties reflect the limited number of data events and the systematic uncertainties, giving a total uncertainty of 4.2%. The cross-section is measured differentially as a function of variables characterizing the tt¯ system and additional radiation in the events. The results are compared with various Monte Carlo generators, including comparisons where the generators are reweighted to match a parton-level calculation at next-to-next-to-leading order. The reweighting improves the agreement between data and theory. The measured distribution of the top-quark transverse momentum is used to search for new physics in the context of the effective field theory framework. No significant deviation from the Standard Model is observed and limits are set on the Wilson coefficients of the dimension-six operators O tG and $O$ $^{(8)}_{tq}$, where the limits on the latter are the most stringent to date.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Dielectron production at midrapidity at low transverse momentum in peripheral and semi-peripheral Pb–Pb collisions at ${\sqrt{s}}_{\textrm{NN}}$ = 5.02 TeV

The first measurement of the e + e – pair production at low lepton pair transverse momentum (p T,ee ) and low invariant mass (m ee ) in non-central Pb–Pb collisions at ${\sqrt{s}}_{\textrm{NN}}$ = 5.02 TeV at the LHC is presented. The dielectron production is studied with the ALICE detector at midrapidity (|η e | < 0.8) as a function of invariant mass (0.4 ≤ m ee < 2.7 GeV/c 2 ) in the 50–70% and 70–90% centrality classes for p T,ee < 0.1 GeV/c, and as a function of p T,ee in three m ee intervals in the most peripheral Pb–Pb collisions. Below a p T,ee of 0.1 GeV/c, a clear excess of e + e – pairs is found compared to the expectations from known hadronic sources and predictions of thermal radiation from the medium. The m ee excess spectra are reproduced, within uncertainties, by different predictions of the photon–photon production of dielectrons, where the photons originate from the extremely strong electromagnetic fields generated by the highly Lorentz-contracted Pb nuclei. Lowest-order quantum electrodynamic (QED) calculations, as well as a model that takes into account the impact-parameter dependence of the average transverse momentum of the photons, also provide a good description of the p T,ee spectra. The measured $\sqrt{\left\langle {p}_{\textrm{T},\textrm{ee}}^2\right\rangle }$ of the excess p T,ee spectrum in peripheral Pb–Pb collisions is found to be comparable to the values observed previously at RHIC in a similar phase-space region.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Search for dark photons from Higgs boson decays via $ZH$ production with a photon plus missing transverse momentum signature from $pp$ collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

This paper describes a search for dark photons ($γ_d$) in proton-proton collisions at $\sqrt{s}$ = 13 TeV at the Large Hadron Collider (LHC). The dark photons are searched for in the decay of Higgs bosons ($H$ → $γγ_d$) produced through the $ZH$ production mode. The transverse mass of the system, made of the photon and the missing transverse momentum from the non-interacting $γ_d$, presents a distinctive signature as it peaks near the Higgs boson mass. The results presented use the total Run-2 integrated luminosity of 139 fb –1 recorded by the ATLAS detector at the LHC. The dominant reducible background processes are estimated using data-driven techniques. A Boosted Decision Tree technique is adopted to enhance the sensitivity of the search. As no excess is observed with respect to the Standard Model prediction, an observed (expected) upper limit on the branching ratio BR($H$ → $γγ_d$) of 2.28% (${2.82}_{–0.84}^{+1.33}$%) is set at 95% CL for massless $γ_d$. For massive dark photons up to 40 GeV, the observed (expected) upper limits on BR($H$ → $γγ_d$) at 95% confidence level is found within the [2.19,2.52]% ([2.71,3.11]%) range.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗