SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The techniques for calibrating the translator path by means of a portable zero delay device are described. In addition, some translator path data taken at DSS 14, Goldstone, over a period of about one year is presented.
Test data for vertical translation motions of the V0012 and V23010-1.58 airfoils were compared with force pitch and oscillation data to determine qualitative differences in dynamic stall behavior. Chordwise differential pressure variations were examined in detail for the test conditions displaying dynamic stall. The comparison revealed a number of differences both in the onset of stall and in the progression separation as a function of the type of motion. The evidence of secondary stall events following the recovery from initial stall were found to be dependent on the type of motion, but additional data will be needed to incorporate vertical translation effects into the empirical approximation of dynamic stall.
The semiclassical transition probability was incorporated in the simulation for energy exchange between rotational and translational energy. The results provide details on the fundamental mechanisms of gas kinetics where analytical methods were impractical. The validity of the local Maxwellian assumption and relaxation time, rotational-translational energy transition, and a velocity analysis of the inelastic collision were discussed in detail.
A simultaneous determination of the rotational and translational temperatures of OH(2 Pi) in a water-vapor discharge is reported. These temperatures were determined by measuring the strength and line shape of the absorption lines in the 2 Pi (v = 0) - 2 Sigma(+) (v = 0) transitions of OH using a CW tunable laser. It was found that the rotational distribution was thermalized, but the corresponding rotational temperature was much lower than the translational temperature. Possible implications of these results are discussed.
The framework in which minimum-commitment analyses of creep-rupture data can be implemented is outlined. The approach is termed the focal point convergence method (FPCM) because the basic parameter A, also known as stability factor, is geometrically the (imaginary) focal point of convergence of all isothermals when extended to the very long or very short times necessary for such convergence to occur. The method can be implemented either by manual-graphical analysis or by computer code. The method is illustrated in detail for the nickel-base alloy Astroloy, as well as for steels, other nickel-base alloys, and aluminum alloys. The minimum-commitment concept is extended to the analysis of creep-rupture data where each isothermal is generated by an oblique translation of the 'master curve' when plotted on log rupture time and log stress axes. The oblique translation method uses the same types of functions in the FPCM. Approaches for treating multiheats on the basis of the FPCM are discussed in detail.
The direct simulation Monte Carlo method is applied to solve the Boltzmann equation for collisions between internally excited diatomic gases in highly nonequilibrium states. The semiclassical transition probability is incorporated in the simulation for energy exchange between rotational and translational energy. The results provide details on the fundamental mechanisms of gas kinetics where analytical methods are impractical. The validity of the local Maxwellian assumption and relaxation time, rotational-translational energy transition, and a velocity analysis of the inelastic collision are discussed in detail.
The extension of the 26 meter antenna to 34 meter diameter decreased the F/D ratio. This F/D change resulted in unacceptable gain losses due to the hyperboloid's lateral deflections. A three direction translating mounting device was added to the hyperboloid. This device was controlled by a microprocessor to minimize the offsets of the phase centers in the cassegrain RF system and also compensated for boresight directions. The use of the radiation program to predict the gain losses from displacements computed by a structural computing program using an analytical model of the 34 meter reflector structure is discussed. Field test results showed accurate predictions for the Y and Z hyperboloid translations. In the X direction, the prediction value was low. However, the computed gain losses vs primary foci offsets by the radiation program were verified by field tests.
An adiabatic quantal theory of spectral line shapes in collision-induced absorption and emission is presented which incorporates the induced translation-rotation and translation-vibration spectra. The generalization to account for the anisotropy of the scattering potential is given. Calculations are carried out of the collision-induced absorption spectra of He in collisions with H2 with ab initio electric dipole functions and realistic potentials. The anisotropy of the interaction potential is small and is not included in the calculations. The predicted spectra are in satisfactory agreement with experimental data though some deviations occur which may be significant. The rotational line shapes have exponential wings and are not Lorentzian. The connection between the quantal and classical theories is written out explicitly for the isotropic overlap induction.
Observations with three astronauts yielded two major findings. First, perceived self-motion during sinusoidal roll differed immediately postflight from preflight. Between 70 and 150 min after landing, roll was perceived primarily as linear translation. Secondly, more horizontal eye movement was elicited by roll simulation immediately postflight relative to both preflight and later postflight observations. These results support an 'otolith tilt-translation reinterpretation' hypothesis, which has clear implications for understanding astronaut reports of space motion sickness during the early period of orbital flight. A proposal for 'prophylactic adaptation training' which may provide preflight adaptation to weightlessness, derives from this reearch.
Studies have shown that reduced specific fuel consumption of rotorcraft engines can be achieved with a variable capacity engine. A key component in such an engine in a high-work, high-temperature variable geometry gas generator turbine. An optimization study indicated that a radial turbine with a translating nozzle sidewall could produce high efficiency over a wide range of engine flows but substantiating data were not available. An experimental program with Teledyne CAE, Toledo, Ohio was undertaken to evaluate the moving sidewall concept. A variety of translating nozzle sidewall turbine configurations were evaluated. The effects of nozzle leakage and coolant flows were also investigated. Testing was done in warm air (121 C). The results of the contractual program were summarized.
The requirement for Marshall Space Flight Center's Photo Analysis to use existing 3-D Intergraph graphic files on an existing Tektronix 4129 3-D graphics workstation and the unavailability of an off-the-shelf Intergraph to Tektronix translator required the development of such a translater. Using the output of Intergraph's standard interchange format converter, the 3-D graphic information of Intergraph's files are reformatted and compressed. The 3-D image is reconstructed using Tektronix's software terminal interface graphic library (STI).
Blade-in-groove bearings stacked to obtain necessary degrees of freedom. Mounting system allows panels to be tilted, rotated, and translated selectively. Developed for large solar reflectors or antennas composed of hexagonal panels about 6 ft. wide and 6 in. thick. With system, each panel tilted around two axes to focus antenna. At same time, each panel translates along these axes to accommodate thermal expansion and contraction without affecting focus.
A a computer program used to translate PATRAN finite element model data into Structural Analysis of General Shells (STAGS) input data is presented. The program supports translation of nodal, nodal constraints, element, force, and pressure data. The subroutine UPRESS required for the readings of live pressure data into STAGS is also presented.
The main objectives of the study are: (1) identification of potential passive damping concepts for slender tubular structural members with rotational and translational end springs under natural and forced-free vibrations; (2) evaluation of damping efficiencies of the various damping concepts; and (3) evaluation of the suitability of a theoretical finite difference analysis by comparison to the experimental results for the case of natural vibrations. Only member flexural an translation motion is considered. The natural vibration study is conducted on the seven damping concepts and for only one specific initial deflection. The most suitable of the seven dampers is further investigated under forced-free vibrations. In addition only one set of end springs is used for all of the experiments. The results show that passive damping provides a possible approach to structural vibration reduction.
The purpose of this ongoing research and development program is to develop software tools which enable the rapid development, upgrading, and maintenance of embedded real-time artificial intelligence systems. The goals of this phase of the research were to investigate the feasibility of developing software tools which automatically translate expert system rules into Ada code and develop methods for performing validation and verification testing of the resultant expert system. A prototype system was demonstrated which automatically translated rules from an Air Force expert system was demonstrated which detected errors in the execution of the resultant system. The method and prototype tools for converting AI representations into Ada code by converting the rules into Ada code modules and then linking them with an Activation Framework based run-time environment to form an executable load module are discussed. This method is based upon the use of Evidence Flow Graphs which are a data flow representation for intelligent systems. The development of prototype test generation and evaluation software which was used to test the resultant code is discussed. This testing was performed automatically using Monte-Carlo techniques based upon a constraint based description of the required performance for the system.
The present paper describes a transient translating elastoplastic thermomechanical finite element model to study two-dimensional frictional rolling contact. Frictional two-dimensional contact is simulated by repeatedly translating a nonuniform thermomechanical distribution across the surface of an elastoplastic half space. The half space is represented by a two-dimensional finite element mesh with appropriate boundaries. Calculations are for an elastic-perfectly plastic material and the selected thermophysical properties are assumed to be temperature independent. The paper presents temperature variations, stress and plastic strain distributions and deformations. Residual tensile stresses are observed. The magnitude and depth of these stresses depends on (1) the temperature gradients and (2) the magnitudes of the normal and tangential tractions.
PATSTAGS computer program translates data from PATRAN finite-element mathematical model into STAGS input records used for engineering analysis. Reads data from PATRAN neutral file and writes STAGS input records into STAGS input file and UPRESS data file. Supports translations of nodal constraints, and of nodal, element, force, and pressure data. Written in FORTRAN 77.
The reinforcement learning techniques developed at Ames Research Center are being applied to proximity and docking operations using the Shuttle and Solar Maximum Mission (SMM) satellite simulation. In utilizing these fuzzy learning techniques, we also use the Approximate Reasoning based Intelligent Control (ARIC) architecture, and so we use two terms interchangeable to imply the same. This activity is carried out in the Software Technology Laboratory utilizing the Orbital Operations Simulator (OOS). This report is the deliverable D3 in our project activity and provides the test results of the fuzzy learning translational controller. This report is organized in six sections. Based on our experience and analysis with the attitude controller, we have modified the basic configuration of the reinforcement learning algorithm in ARIC as described in section 2. The shuttle translational controller and its implementation in fuzzy learning architecture is described in section 3. Two test cases that we have performed are described in section 4. Our results and conclusions are discussed in section 5, and section 6 provides future plans and summary for the project.