Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TEMPERATURE PROBE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

SRB environment evaluation and analysis. Volume 1: Redesigned SRB flight heating evaluation

Following the Space Shuttle STS-51L disaster on January 28, 1986, a considerable redesign effort was launched on the Solid Rocket Booster. This effort culminated in three instrumented flights, STS-26R, 27R, and 29R, beginning in September of 1989. Aeroheating data were obtained on these flights in the form of pressure, heat flux, and gas temperature probe measurements. These data were analyzed from an ascent and reentry heating point of view. The flight data were verified, compared with historic and theoretical results, and scaled to design. Impact of these results on the current design environment set was assessed and recommendations made. This report documents this effort.

Crain, William K.↗
NASA NTRS1993

Aircraft observations of the vertical structure of stratiform precipitation relevant to microwave radiative transfer

The retrieval of rainfall intensity over the oceans from passive microwave observations is based on a radiative transfer model. Direct rainfall observations of oceanic rainfall are virtually nonexistent making validation of the retrievals extremely difficult. Observations of the model assumptions provide an alternative approach for improving and developing confidence in the rainfall retrievals. In the winter of 1983, the NASA CV-990 aircraft was equipped with a payload suitable for examining several of the model assumptions. The payload included microwave and infrared radiometers, mirror hygrometers, temperature probes, and PMS probes. On two occasions the aircraft ascended on a spiral track through stratiform precipitation providing an opportunity to study the atmospheric parameters. The assumptions concerning liquid hydrometeors, water vapor, lapse rate, and nonprecipitating clouds were studied. Model assumptions seem to be supported by these observations.

Chang, A. T. C.↗
NASA NTRS1993

An experimental investigation of supersonic swirling jets

The addition of swirl to scramjet fuel jets has been proposed as a method of enhancing fuel mixing, but little of a fundamental nature is known about supersonic swirling flows. This is a study of mixing in supersonic swirling air jets created by tangential injection and acceleration through a convergent-divergent nozzle into stagnant air. Several cases with different vortex circulations were investigated using pitot, cone and total-temperature probes, and Rayleigh scattering from a laser light sheet. The results show that tangential injection is an efficient method for generating swirling jets; that the swirling jets mix much more rapidly with the ambient air than comparable straight jets; and that when overexpanded, considerable turbulence and increased mixing is created as a result of vortex breakdown.

Cutler, Andrew D.↗
NASA NTRS1993

Solar cycle variations of electron density and temperature in the Venusian nightside ionosphere

The return of periapsis to low altitudes during the Summer and Fall of 1992 provided a unique opportunity for the Pioneer Venus Orbiter (PVO) to make in situ measurements in the Venusian ionosphere at much lower levels of solar activity (F10.7 approx. equals 120) than existed when periapsis was at low altitudes in 1979 and 1980 (F10.7 approx. equals 220). We present the observations of electron density (N(sub e)) and temperature (T(sub e)) made by the Orbiter Electron Temperature Probe (OETP) during the Entry Period. Empirical models of the N(sub e) and T(sub e) height variations are presented and compared with similar models based on OETP measurements made at solar maximum. The median N(sub e) at the ionospheric peak (approx. 140 km) was essentially unchanged from its solar maximum value, but the ionosphere was increasingly depleted at higher altitudes, reaching a factor of 7 lower densities at 200 km. T(sub e) was lower by almost a factor of 2 at 140 km but was rather significantly enhanced at higher altitudes; exceeding its solar maximum values by a factor of 1.3 at 200 km and a factor of 2 at 500 km. In general these results support the earlier conclusions that the nightside upper ionosphere is depleted at lower levels of solar activity by a reduction of the nightward ion flow. The lack of N(sub e) variation near the peak (between solar maximum and entry) suggests that nightward ion transport does not play as large a role in the peak formation as does local ion production by energetic particles. The decrease does local ion production by energetic particles. The decrease in T(sub e) at low altitudes suggests that the low densities of the upper ionosphere at the time of PVO entry could no longer support the conduction of heat from the dayside ionosphere, thus allowing the lower nightside ionosphere to cool by collisions with ions and neutrals, and by heat conduction to the cooler regions below.

Theis, Robert F.↗
NASA NTRS1993

Observations of the nightside Venus ionosphere: Final encounter of the Pioneer Venus Orbiter Ion Mass Spectrometer

During the last orbital sequences of the Pioneer-Venus spacecraft prior to final encounter and atmospheric entry, data were obtained by the Orbiter Ion Mass Spectrometer (OIMS) at the lowest periapsis altitudes of the mission. These data verified OIMS observations of the nightside ionospheric peak reported earlier in the mission, and revealed additional details related to composition, energetics and maintenance of the nightside ionosphere. OIMS observations of the ion peak during the final encounter sequence are compared with radio occultation data and OIMS peak observations obtained earlier. OIMS ion density and Orbiter Electron Temperature Probe (OETP) electron density are found to correlate near the peak. Coupling of mass channels 30 and 32 during nightside passes is observed and its interpretation considered. Changes in high altitude composition of the nightside ionosphere, especially the relative changes in O(+) and H(+), are described.

Cloutier, P. A.↗
NASA NTRS1993

Kilometer-sized waves in electron density in the Venusian nightside ionosphere

As periapsis of the Pioneer Venus Orbiter (PVO) descended into the lower nightside ionosphere of Venus in the Fall of 1992, wave-like ionospheric density strucutures began to appear on some of the volt-ampere characteristics of the Orbiter Electron Temperature Probe. The number of such events is insufficient to fully define their morphology but enough to provide an indication of the wave amplitudes, scale sizes, occurrence altitudes, and local time variation. The density variations were quasi-sinudoidal, with wavelengths of the order of 1 km along the nearly horizontal trajectory near periapsis. Nearly all of the wave events were encountered within an altitude band lying between 140 and 160 km, a region containing the steep negative N(sub e) gradient just above the ionospheric peak. The waves generally did not fill the occurrence band but were seen primarily as isolated events on curves taken intermittently as PVO crossed through the band. Peak-to-trough amplitudes (delta N/N) were in the range of 5% to 50%. The latitudinal extent of the waves could not be resolved because volt-ampere curves were obtained only intermittent, however, their occurrence on both inbound and outbound passages through the wave band suggests that the waves sometimes exist in layers that extend over at least 15 deg of latitude. The generation mechanism for these waves is unknown, but we suspect that it involves the steep density gradient that separates the main nightside ionosphere from the tenuous, and probably rapidly flowing plasma above.

Brace, Larry H.↗
NASA NTRS1995

The nightward ion flow scenario at Venus revisited

We indicate how existing Pioneer Venus Orbiter (PVO) data might be used to gain a better understanding of nightward ion flow in the Venusian ionosphere. Calculations based on PVO measurements made at solar maximum suggest that the global nightward flow of O(+) may be signifcantly greater than is required to maintain the observed nightside ionosphere densities. The validity of this conclusion depends upon (1) the accuracy with which the flow can be determined from the PVO ion density and velocity measurements and (2) the validity of the ionosphere theory used to estimate the required downward O(+) flux on the night side. If the measurements and theory are assumed to be accurate, the excess nightward flow implies a significant rate of ion escape from the planet, particularly at times of low solar wind dynamic pressure, Psw, when the ionopause rises to allow increased nightward flow. To illustrate a potentially important mechanism for ion escape from Venus, we present Orbiter Electron Temperature Probe (OETP) observations of plasma clouds and scavenged ionospheric plasma observed above the ionopause. We then employ OETP and Orbiter Retarding Potential Analyzer (ORPA) data to reexamine the global ion flow for average Psw conditions.

Brace, L. H.↗
NASA NTRS1990

Planetary Geomorphology

One of the major problems in the series of ice runs was that the subsurface temperature probes did not function. AIC re-evaluated the design and, after testing several suitable sensors, installed 50 type T thermocouples, each 2 m long. In this design, each thermocouple was soldered to a rectangular copper foil spreader 0.3 com wide by 2.8 cm long to ensure an acute reading. The long rectangular shape was used because it had a large area for good thermal connection to the test material.

Malin, Michael C.↗
NASA NTRS1993

Solar Cycle Variations of Electron Density and Temperature in the Venusian Nightside Ionosphere

The return of periapsis to low altitudes during the Summer and Fall of 1992 provided a unique opportunity for the Pioneer Venus Orbiter (PVO) to make in situ measurements in the Venusian ionosphere at much lower levels of solar activity (F10.7=120) than existed when periapsis was at low altitudes in 1979 and 1980 (F10.7=220). We present the observations of electron density (N(sub e)) and temperature (T(sub e)) made by the Orbiter Electron Temperature Probe (OETP) during the Entry Period. Empirical models of the Ne and Te height variations are presented and compared with similar models based on OETP measurements made at solar maximum. The median Ne at the ionospheric peak (approx. 140 km) was essentially unchanged from its solar maximum value, but the ionosphere was increasingly depleted at higher altitudes, reaching a factor of 7 lower densities at 200 km. T(sub e) was lower by almost a factor of 2 at 140 km but was rather significantly enhanced at higher altitudes; exceeding its solar maximum values by a factor of 1.3 at 200 km and a factor of 2 at 500 km. In general these results support the earlier conclusions that the nightside upper ionosphere is depleted at lower levels of solar activity by a reduction of the nightward ion flow. The lack of N(sub e) variation near the peak (between solar maximum and entry) suggests that nightward ion transport does not play as large a role in the peak formation as does local ion production by energetic particles. The decrease in T(sub e) at low altitudes suggests that the low densities of the upper ionosphere at the time of PVO entry could no longer support the conduction of heat from the dayside ionosphere, thus allowing the lower nightside ionosphere to cool by collisions with ions and neutrals, and by heat conduction to the cooler regions below.

Theis, Robert F.↗
NASA NTRS1993

Observations of the Nightside Venus Ionosphere: Final Encounter of the Pioneer Venus Orbiter Ion Mass Spectrometer

During the last orbital sequences of the Pioneer Venus spacecraft prior to final encounter and atmospheric entry, data were obtained by the Orbiter Ion Mass Spectrometer (OIMS) at the lowest periapsis altitudes of the mission. These data verified OIMS observations of the nightside ionospheric peak reported-earlier in the mission, and revealed additional details related to composition, energetics and maintenance of the nightside ionosphere. OIMS observations of the ion peak during the final encounter sequence are compared with radio occultation data and OIMS peak observations obtained earlier. OIMS ion density and Orbiter Electron Temperature Probe (OETP) electron density are found to correlate near the peak. Coupling of mass channels 30 and 32 during nightside passes is observed and its interpretation considered. Changes in high altitude composition of the nightside ionosphere, especially the relative changes in O(+) and H(+), are described.

Cloutier, P. A.↗
NASA NTRS1993

Kilometer-Sized Waves in Electron Density in the Venusian Nightside Ionosphere

As periapsis of the Pioneer Venus Orbiter (PVO) descended into the lower nightside ionosphere of Venus in the Fall of 1992, wave-like ionospheric density structures began to appear on some of the volt-ampere characteristics of the Orbiter Electron Temperature Probe. The number of such events is insufficient to fully define their morphology but enough to provide an indication of the wave amplitudes, scale sizes, occurrence altitudes, and local time variation. The density variations were quasi-sinusoidal, with wavelengths of the order of 1 km along the nearly horizontal trajectory near periapsis. Nearly all of the wave events were encountered within an altitude band lying between 140 and 160 km, a region containing the steep negative N(sub e) gradient just above the ionospheric peak. The waves generally did not fill the occurrence band but were seen primarily as isolated events on curves taken intermittently as PVO crossed through the band. Peak-to-trough amplitudes ((Delta)N/N) were in the range of 5% to 50%. The waves exhibited little local time variation within the available viewing period (01-04 hrs), with perhaps a tendency for the waves to rise to slightly higher altitudes toward dawn. The latitudinal extent of the waves could not be resolved because volt-ampere curves were obtained only intermittently, however, their occurrence on both inbound and outbound passages through the wave band suggests that the waves sometimes exist in layers that extend over at least 15 deg of latitude. The generation mechanism for these waves is unknown, but we suspect that it involves the steep density gradient that separates the main nightside ionosphere from the tenuous, and probably rapidly flowing plasma above.

Brace, Larry H.↗
NASA NTRS1992

Studies of the Chemistry of the Nightside Ionosphere of Venus

During the tenure of this grant, we have been looking into the chemistry of the nightside ionosphere of Venus with a view toward elucidating the relative roles of electron precipitation and plasma transport as sources of the nightside ionosphere. Secondary goals have included determining the densities of minor species on the nightside, and verifying the relative normalization of the Pioneer Venus orbiter ion mass spectrometer (OIMS) and orbiter neutral mass spectrometer (ONMS) in the photochemical equilibrium region. Our studies have involved a combination of numerical modeling and analysis of the Pioneer Venus UADS data base, specifically data from the OIMS, ONMS and electron temperature probe (OETP). We have set up a one-dimensional model of the Venus nightside ionosphere, in which downward fluxes of atomic ions are introduced at the upper boundary to simulate transport of ions from the dayside. Our model shows that the densities of mass-28 ions (CO+ + N+) resulting from an influx of atomic ions from the dayside are quite small, due to the high ionization potentials of CO and N2 that make chemical production difficult.

Fox, J.L.↗
NASA NTRS2000

First Detection of Methanol in a Class O Protostellar Disk

We report the detection of emission from methanol in a compact source coincident with the position of the L1157 infrared source, which we attribute to molecules in the disk surrounding this young, Class O protostellar object. In addition, we identify a spectral feature in the outflow corresponding to an ethanol transition. Using the Caltech Owens Valley Millimeter Array with a synthesized beam size of 2", we detect spatially unresolved methanol in the 2(sub k) - 1(sub k) transitions at 3mm, which is coincident in position with the peak of the continuum emission. The gas phase methanol could be located in the central region (< 100 AU radius) of a flat disk, or in an extended heated surface layer (approx. 200 AU radius) of a flared disk. The fractional abundance of methanol X(CH3OH) is approx. 2 x l0(exp -8) in the flat disk model, and 3 x l0(exp -7) for the flared disk. The fractional abundance is small in the disk as a whole, but considerably larger in the warm portions. This difference indicates that substantial chemical processing probably takes place in the disk via depletion and desorption. The methanol desorbed from the grains in the warm surface layers returns to the icy grain mantles in the cooler interior of the disk, where it is available to become part of the composition of solar system-like bodies, such as comets, formed in the outer circumstellar region. This first millimeter-wavelength detection of a complex organic molecule in a young protostellar disk has implications for disk structure and chemical evolution and for potential use as a temperature probe. The research of TV and WL was conducted at the Jet Propulsion Laboratory, California Institute of Technology with support from the National Aeronautics and Space Administration.

Velusamy, T.↗
NASA NTRS2007

Advanced Systems for Monitoring Underwater Sounds

The term "Passive Acoustic Monitoring System" (PAMS) describes a developmental sensing-and-data-acquisition system for recording underwater sounds. The sounds (more precisely, digitized and preprocessed versions from acoustic transducers) are subsequently analyzed by a combination of data processing and interpretation to identify and/or, in some cases, to locate the sources of those sounds. PAMS was originally designed to locate the sources such as fish of species that one knows or seeks to identify. The PAMS unit could also be used to locate other sources, for example, marine life, human divers, and/or vessels. The underlying principles of passive acoustic sensing and analyzing acoustic-signal data in conjunction with temperature and salinity data are not new and not unique to PAMS. Part of the uniqueness of the PAMS design is that it is the first deep-sea instrumentation design to provide a capability for studying soniferous marine animals (especially fish) over the wide depth range described below. The uniqueness of PAMS also lies partly in a synergistic combination of advanced sensing, packaging, and data-processing design features with features adapted from proven marine instrumentation systems. This combination affords a versatility that enables adaptation to a variety of undersea missions using a variety of sensors. The interpretation of acoustic data can include visual inspection of power-spectrum plots for identification of spectral signatures of known biological species or artificial sources. Alternatively or in addition, data analysis could include determination of relative times of arrival of signals at different acoustic sensors arrayed at known locations. From these times of arrival, locations of acoustic sources (and errors in those locations) can be estimated. Estimates of relative locations of sources and sensors can be refined through analysis of the attenuation of sound in the intervening water in combination with water-temperature and salinity data acquired by instrumentation systems other than PAMS. A PAMS is packaged as a battery-powered unit, mated with external sensors, that can operate in the ocean at any depth from 2 m to 1 km. A PAMS includes a pressure housing, a deep-sea battery, a hydrophone (which is one of the mating external sensors), and an external monitor and keyboard box. In addition to acoustic transducers, external sensors can include temperature probes and, potentially, underwater cameras. The pressure housing contains a computer that includes a hard drive, DC-to- DC power converters, a post-amplifier board, a sound card, and a universal serial bus (USB) 4-port hub.

Lane, Michael↗
NASA NTRS2011

Ares I-X First Stage Internal Aft Skirt Re-Entry Heating Data and Modeling

The CLVSTATE engineering code is being used to predict Ares-I launch vehicle first stage reentry aerodynamic heating. An engineering analysis is developed which yields reasonable predictions for the timing of the first stage aft skirt thermal curtain failure and the resulting internal gas temperatures. The analysis is based on correlations of the Ares I-X internal aft skirt gas temperatures and has been implemented into CLVSTATE. Validation of the thermal curtain opening models has been accomplished using additional Ares I-X thermocouple, calorimeter and pressure flight data. In addition, a technique which accounts for radiation losses at high altitudes has been developed which improves the gas temperature measurements obtained by the gas temperature probes (GTP). Updates to the CLVSTATE models are shown to improve the accuracy of the internal aft skirt heating predictions which will result in increased confidence in future vehicle designs

Schmitz, Craig P.↗
NASA NTRS2011

Ares I-X Ascent Base Environments

Plume induced base heating environments were measured during the flight of the NASA Constellation Ares I-X developmental launch vehicle, successfully flown on October 28, 2009. The Ares IX first stage is a four segment Space Shuttle derived booster with base consisting of a flared aft skirt, deceleration and tumble motors, and a thermal curtain surrounding the first stage 7.2 area ratio nozzle. Developmental Flight Instrumentation (DFI) consisted of radiometers, calorimeters, pressure transducers and gas temperature probes installed on the aft skirt and nozzle to measure the base environments. In addition, thermocouples were also installed between the layers of the flexible thermal curtain to provide insight into the curtain response to the base environments and to assist in understanding curtain failure during reentry. Plume radiation environment predictions were generated by the Reverse Monte Carlo (RMC) code and the convective base heating predictions utilized heritage MSFC empirical methods. These predictions were compared to the DFI data and results from the flight videography. Radiation predictions agreed with the flight measured data early in flight but gauge failures prevented high altitude comparisons. The convective environment comparisons demonstrated the need to improve the prediction methodology; particularly for low altitude, local plume recirculation. The convective comparisons showed relatively good agreement at altitudes greater than 50,000 feet.

Mobley, B. L.↗
NASA NTRS2011

Real-Time Thermographic-Phosphor-Based Temperature Measurements of Thermal Barrier Coating Surfaces Subjected to a High-Velocity Combustor Burner Environment

Surface temperature measurements were conducted on metallic specimens coated with an yttria-stabilized zirconia (YSZ) thermal barrier coating (TBC) with a YAG:Dy phosphor layer that were subjected to an aggressive high-velocity combustor burner environment. Luminescence-based surface temperature measurements of the same TBC system have previously been demonstrated for specimens subjected to static furnace or laser heating. Surface temperatures were determined from the decay time of the luminescence signal of the YAG:Dy phosphor layer that was excited by a pulsed laser source. However, the furnace and laser heating provides a much more benign environment than that which exists in a turbine engine, where there are additional challenges of a highly radiant background and high velocity gases. As the next step in validating the suitability of luminescence-based temperature measurements for turbine engine environments, new testing was performed where heating was provided by a high-velocity combustor burner rig at Williams International. Real-time surface temperature measurements during burner rig heating were obtained from the decay of the luminescence from the YAG:Dy surface layer. The robustness of several temperature probe designs in the sonic velocity, high radiance flame environment was evaluated. In addition, analysis was performed to show whether the luminescence decay could be satisfactorily extracted from the high radiance background.

Eldridge, Jeffrey I.↗
NASA NTRS2017

Development of a Rotating Rake Array for Boundary-Layer-Ingesting Fan-Stage Measurements

The recent Boundary-Layer-Ingesting Inlet/Distortion Tolerant Fan wind tunnel experiment at NASA Glenn Research Center's 8-foot by 6-foot supersonic wind tunnel examined the performance of a novel inlet and fan stage that was designed to ingest the vehicle boundary layer in order to take advantage of a predicted overall propulsive efficiency benefit. A key piece of the experiment's instrumentation was a pair of rotating rake arrays located upstream and downstream of the fan stage. This paper examines the development of these rake arrays. Pre-test numerical solutions were sampled to determine placement and spacing for rake pressure and temperature probes. The effects of probe spacing and survey density on the repeatability of survey measurements was examined. These data were then used to estimate measurement uncertainty for the adiabatic efficiency.

Wolter, John D.↗