Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TATB”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Review of the Effects of Polymer Binder Properties on Microstructure and Irreversible Volume Growth of Plastic Bonded Explosives Formulations

The rational design of effective polymeric binders for the formulation of plastic-bonded explosives (PBX) is challenging due to their inherent compositional complexity. The composites comprise irregularly shaped energetic material (EM) powders coated with low weight fractions of polymer via non-equilibrium processes such as slurry coating. Defects can deleteriously affect PBX stability and performance: nano- to micrometer-scale voids can act as loci for hot spots, lowering deflagration and detonation temperatures in unpredictable ways. Furthermore, some nominally desirable polymer properties are at odds with each other: e. g. good flow characteristics are desirable for coating and adhesion, but mechanical stiffness is needed to prevent deformation and cracking of PBX under mechanical stress. Good binder adhesion is critical, but the best means to predict and measure adhesion in PBX is not obvious. Experimental methods of determining binder adhesion on model surfaces may not capture polymer structural configurations relevant to deposition during coating. Molecular dynamics-based computational models have predicted key observables in PBX formulation, suggesting that they may be powerful tools for binder selection. In this review, primarily recent (~2006 and later) literature on polymeric binders for insensitive HE (IHE) is surveyed. We focus on how binder properties influence observable PBX properties as resistance to irreversible volume growth and void formation in PBX formulations mainly (but not exclusively) featuring 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) as the EM (e. g. PBX 9502, LX-17 and others). Conclusions from these studies yield useful guidelines for choosing HE binder candidates, as well as for the general design of highly-filled polymer composite materials. Finally, studies describing challenges in PBX formulation with the newer and more energetically dense high explosive, LLM-105, will be discussed.

adhesion↗

Mechanical and thermomechanical properties of an LLM-105 based PBX high explosive with and without accelerated aging

In this paper we present measurements and analysis on the mechanical and thermomechanical properties of the LLM-105 based plastic bonded high explosive RX-55-DQ. Specifically we present uni-axial compression, and thermal measurements (CTE and ratchet growth), and for some of the measurements we provide a comparison to measurements on TATB-based PBX 9502. We also present the same mechanical property measurements performed on RX-55-DQ samples that underwent accelerated aging.

thermomechnical properties↗

Ultrasound Characterization of Plastic Bonded Explosives With Varied Binder Content and Density

Advanced explosive formulations and methods of production require rapid characterization for both processes and materials. Here, we present results for ultrasound characterization of a plastic bonded explosive (PBX) formulation as a function of binder weight percent and pressing density using through-transmission sound speed measurements. The explosive in this study was composed of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) combined with the fluoropolymer binder Kynar Ultraflex B. Binder content ranged from 2.6 wt.% to 11.5 wt.% with associated explosive formulation densities from 1.69 g/cc to 1.89 g/cc. We find linear and nonlinear changes in longitudinal and shear sound speeds, peak frequencies, and measured elastic properties for the different PBX formulations. These measured changes can differentiate the tested formulations, highlighting the potential for ultrasound as a nondestructive characterization method for newly-formulated PBXs. We also demonstrate through-transmission measurements using different coupling media and present results from an ultrasound technique called resonant ultrasound spectroscopy (RUS). Both transmission and RUS approaches may allow for rapid and even automated characterization of PBX components suitable for high-throughput manufacturing operations.

Engineering↗

Determination of enthalpies of formation of energetic molecules with composite quantum chemical methods

We report gas-phase enthalpies of formation for the set of energetic molecules NTO, DADE, LLM-105, TNT, RDX, TATB, HMX, and PETN using the G2, G3, G4, and ccCA-PS3 quantum composite methods. Calculations for HMX and PETN hitherto represent the largest molecules attempted with these methods. G3 and G4 calculations are typically close to one another, with a larger difference found between these methods and ccCA-PS3. Furthermore there is significant uncertainty in experimental values, the mean absolute deviation between the average experimental value and calculations are 12, 6, 7, and 3 kcal/mol for G2, G3, G4, and ccCA-PS3, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental measurement of energy release from an initiating layer in an insensitive explosive

When subjected to a shock of insufficient strength to trigger prompt reaction, heterogenous condensed phase explosives can form regions where significant amounts of the explosive remain unreacted for times much greater than the reaction time of the detonating explosive. This phenomena is observed for the explosive PBX 9502 (95 wt% TATB) both for planar and oblique input shocks. Here, we build on previous results by performing cylinder expansion (CYLEX) tests where the explosive charge is comprised of a faster core of PBX 9501 (95 wt% HMX) inside a slower annulus of PBX 9502. The detonation in the faster PBX 9501 drives an oblique shock into the adjacent PBX 9502, and an annular transverse initiating layer (IL) results. In the test geometry, the IL travels steadily down the length of the test after a short run distance. At radial positions beyond the IL, an annular region of detonating PBX 9502 is observed. Using standard CYLEX test diagnostics, we infer the total energy release of this experiment. By making the assumptions that (1) the combined energy release is comprised of contributions from detonating PBX 9501, detonating PBX 9502, and the IL in the PBX 9502 and (2) mass-specific energy release for the detonating explosives is approximately the same as typically observed for each explosive, the IL energy release and reaction efficiency can be computed. Results are compared to prior results for a similar geometry, and indicate that while shock deadened PBX 9502 does not detonate promptly, it does eventually release a significant portion of its chemical potential energy over longer timescales on the order of 10 µs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Intergranular Hotspots: A Molecular Dynamics Study on the Influence of Compressive and Shear Work

Numerous crystal- and microstructural-level mechanisms are at play in the formation of hotspots, which are known to govern high explosives initiation behavior. Most of these mechanisms, including pore collapse, interfacial friction, and shear banding, involve both compressive and shear work done within the material and have thus far remained difficult to separate. Here, we assess hotspots formed at shocked crystal–crystal interfaces using quasi-1D molecular dynamics simulations that isolate effects due to compression and shear. Two high explosive materials are considered (TATB and PETN) that exhibit distinctly different levels of molecular conformational flexibility and crystal packing anisotropy. Temperature and intramolecular strain energy localization in the hotspot are assessed through parametric variation of the crystal orientation and two velocity components that respectively modulate compression and shear work. The resulting hotspots are found to be highly localized to a region within 5–20 nm of the crystal–crystal interface. Compressive work plays a considerably larger role in localizing temperature and intramolecular strain energy for both materials and all crystal orientations considered. Shear induces a moderate increase in energy localization relative to unsheared cases only for relatively weak compressive shock pressures of approximately 10 GPa. These results help isolate and rank the relative importance of hotspot generation mechanisms and are anticipated to guide the treatment of crystal–crystal interfaces in coarse-grained models of polycrystalline high-explosive materials.

36 MATERIALS SCIENCE↗

Influence of Pore Surface Structure and Contents on Shock-Induced Collapse and Energy Localization

The majority of computational efforts in the shockwave driven collapse of porosity focus on idealized pore geometries and structures. These give significant insight into the physical mechanisms in play, but omit some potentially important effects of real energetic materials. Here, to address this, we simulate pore collapse in 1,3,5-triamino-2,4,6-trinitrobenzene (TATB) for four types of pore surfaces and fillings: an idealized cylindrical pore, a pore surface coated with polymer, a melted/amorphous pore surface, and a pore filled with gas molecules. We find that these perturbations to the pore structure result in only minor changes to the highly complex collapse mechanisms. However, significant differences in hotspot temperature are observed, with peak temperatures ranging over several hundred Kelvin. The polymer-coated system has the most effect, lowering the hotspot temperature by 300 K, and also limiting the manifestation of intramolecular strain energy that is known to induce mechanochemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Relationship between pressure and reaction violence in thermal explosions

Reaction violence of a thermal explosion is determined by the energy release rate of the explosive and the coupling of that energy to the case and surroundings. For the HMX and TATB based secondary high explosives studied, we have observed that temperature controls the time to explosion and pressure controls the final energy release rate subsequent to ignition. Pressure measurements in the thermal explosion regime have been notoriously difficult to make due to the extreme rise in temperature which is also occurring during a thermal explosion. We have utilized several different pressure measurement techniques for several different secondary high explosives. These techniques include commercially available piezoelectric and piezoresistive sensors which we have utilized in the low pressure (sub 30 MPa) range of PBX 9502 thermal explosions, and fiber Bragg grating sensors for the higher pressure range (up to GPa) for PBX9501 experiments. In this talk, we will compare the measurement techniques and discuss the pressures measured for the different formulations studied. Simultaneous x-ray radiography measurements of burn velocity will also be shown and correlations between pressure, burn velocity, and reaction violence will be discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Aqueous density fractionation of nanocarbons from colliding-wave PBX9502 detonation soot

The study of solid carbon (nanocarbon) nucleation and growth from detonating high explosives is limited because of the difficulty directly evaluating chemical reactions behind the shock front. Understanding the correlation between detonation conditions and nanocarbon formation requires isolation, purification, and analysis of the carbon products. Aqueous density fractionation of products recovered from a colliding wave TATB-based high explosive (PBX9502) detonation are evaluated as an environmentally benign, “green” chemical processing approach for the separation of carbon materials from metal and metal oxide byproducts. Recovery of material sufficient for X-ray scattering analysis was obtained in two fractions. X-ray scattering showed the less dense fraction (ρ < 1 g/cm 3 ) contains hollow spherical core (d avg = 27.8 nm) nanoparticles with a shell (thickness=3.6 nm) composed of predominately sp 2 hybridized carbon. Particles contained within the dense fraction (ρ > 1 g/cm 3 ) were a mixture of oblate spheroids (major axis length=43.8 nm and minor axis=2.9 nm) and small polydisperse solid spherical particles (d avg = 2.4 nm) composed of both sp 2 and sp 3 bonded carbon with residual contamination from the brass detonators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Time-temperature-stress superposition of PBX 9502 compressive creep data for lifetime predictions

The plastic-bonded explosive (PBX) 9502 is a viscoelastic, high-solids loaded polymer bound composite comprised of 95 weight% (wt%) TATB explosive crystals and 5 wt% FK-800 polymer binder. The uniaxial quasi-static mechanical properties have been studied and characterized extensively over 25+ years, including creep. Creep is the strain evolution over time as a result of an asymmetric load typically at temperatures above ambient. Creep measurements to failure can take excessively long periods of time depending on various factors including applied stress, temperature, and loading rate that render a single test to failure impossible. Using the principles of time-temperature-stress superposition (TTSSP), short-term creep tests at various applied stresses and temperatures can be used for long-term creep predictions. The TTSSP model shifts short-term test data using two factors, one for temperature and stress, creating a master curve at a reference test condition. The master curve can be shifted to predict the creep response at any desired test condition. PBX 9502 compression specimens were tested at three temperatures and various applied stresses. This work discusses the TTSSP analysis of PBX 9502 compressive creep data to create a single comprehensive master curve.

36 MATERIALS SCIENCE↗

Effect of PBX prill size on the compressive properties of PBX 9502

Plastic-Bonded Explosive (PBX) prills are agglomerates a few millimeters in diameter composed of High Explosive crystals non-uniformly distributed in and surrounded by a polymer binder. When pressed at elevated temperatures at or above the binder melt temperature the polymer flows to uniformly coat the HE crystals to create a well-consolidated compaction. In reality it does so imperfectly, such that x-ray tomographic scans often look like a collection of prills mashed together. It is speculated that the larger the prill, the more non-uniform the binder distribution, but this has never been proven. Even if that were not so, the larger the prill the farther binder must flow toward the middle to homogenize during pressing. Thus, the degree of homogenization depends in part on prill size. The degree to which binder flows during pressing in turn affects the void distribution within pressed charges, which one suspects will affect shock sensitivity and material strength. In this paper we explore, for ~30 PBX 9502 formulation batches using the same TATB powder lot, how prill size affects the compressive mechanical properties.

36 MATERIALS SCIENCE↗

High Explosive Ignition through Chemically Activated Nanoscale Shear Bands

Shock initiation and detonation of high explosives is considered to be controlled through hot spots, which are local regions of elevated temperature that accelerate chemical reactions. Using classical molecular dynamics, we predict the formation of nanoscale shear bands through plastic failure in shocked TATB high explosive crystal. By scale-bridging with quantum-based molecular dynamics, we show that shear bands exhibit lower reaction barriers. While shear bands quickly cool,they remain chemically activated and support increased reaction rates without the local heating typically evoked by the hot spot paradigm. We describe this phenomenon as chemical activation through shear banding

Chemistry - Inorganic↗

Determining the Coalescence of Hotspots into Uniform Detonation Fronts in High Explosives

Microwave Interferometry (MI) offers the advantage of a continuous time measurement of detonation front velocity from detonation initiation to disassembly, which is an important step to assure the quality of stockpile high explosives. However, the method is currently characterized by areas of poor signal strength, which lead to low confidence measurements. Experiments in inert materials were conducted to determine if reflective hot spots, pockets of plasma that form during detonation, are responsible due to varying hot spot concentrations. Instead, it was found that the copper tube used in a range of standard HE test configurations is the cause of the poor signal reception. Hot spots were represented by microwave reflective aluminum particles. The aluminum was mixed with Titanium Dioxide, a material electrically similar to the insensitive high explosive, triaminotrinitrobenzene (TATB), in volume percent fractions (VPFs) between 0 and 100% aluminum, in increments of 10%. Reflectivity was measured based on input and reflection received from a test apparatus with a layer representing undetonated explosive and another representing an approaching shockwave. The results showed no correlation between VPF and measured reflectivity test cases while enclosed in the standard copper tube. Upon further testing, each sample’s measured reflectivity independent of the copper enclosure did correlate with VPF. This revealed that the test enclosure currently used for MI measurements is causing poor MI signal reception, and new methods must be developed to account for this aberration in MI measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Recipe for implementing the Arrhenius-Shock-Temperature State Sensitive WSD (AWSD) model, with parameters for PBX 9502

A reactive ow model for the tri-amino-tri-nitro-benzene (TATB) based plastic bonded explosive PBX 9502 is presented. This newly devised model is based primarily on the shock temperature of the material, along with local pressure, and accurately models a broader range of detonation and initiation scenarios. The equation of state for the reactants and products, as well as the thermodynamic closure of pressure and temperature equilibration are carried over from the Wescott-Stewart-Davis (WSD) model7,8. Thus, modifying an existing WSD model in a hydrocode should be rather straightforward.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Failure Diameter Resolution Study

Previously the SURFplus reactive burn model was calibrated for the TATB based explosive PBX 9502. The calibration was based on fitting Pop plot data, the failure diameter and the limiting detonation speed, and curvature effect data for small curvature. The model failure diameter is determined utilizing 2-D simulations of an unconfined rate stick to find the minimum diameter for which a detonation wave propagates. Here we examine the effect of mesh resolution on an unconfined rate stick with a diameter (10mm) slightly greater than the measured failure diameter (8 to 9 mm).

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Cooperative self-assembly for structure and morphology control of energetic materials

The performance of energetic materials (EM) varies significantly across production lots due to the inability of current production methods to yield consistent morphology and size. Lot-to-lot variations and the inability to remake the needed characteristics that meet specification is costly, increases uncertainty, and creates additional risk in programs using these materials. There is thus a pressing need to more reliably formulate EMs with greater control of morphology. The goal of this project is to use the surfactant-assisted self-assembly to generate EM particles with welldefined size and external morphologies using triaminotrinitrobenzene (TATB) and hexanitrohexaazaisowurtzitane (CL-20) as these EMs are both prevalent in the stockpile and present interesting/urgent reprocessing challenges. We intend to understand fundamental science on how molecular packing influences EM morphology. We develop scale up fabrication of EM particles with controlled morphology, promising to eliminate inconsistent performance by providing a trusted and reproducible method to improve EMs for NW applications.

36 MATERIALS SCIENCE↗

FY18 J23X PSDT Final Report: Shock Initiation of PBX 9502 Lot HOL88H891-008

This report details a series of plate impact experiments on the insensitive explosive PBX 9502 (95% TATB, 5% Kel-F 800) with lot number HOL88H891-008. This is a ’virgin’ lot (no recycled material used), for which many detonation performance measurements are available; the addition of these 1-D shock initiation experiments will aid model calibration efforts for this material. Samples were machined from isostatically-pressed billets with anominal density of 1.89 g/cc. The evolution of the shock to a detonation was characterized by 9 embedded magnetic particle velocity gauges, and 116 embedded magnetic time of arrival gauges (AKA shock trackers). Pho-ton Doppler velocimetry (PDV) with a LiF window was used at the back surface of the samples to capture the wave profile exiting the sample. Six experiments were performed, covering a pressure range of 10.8–18.6 GPa and run distances to detonation of 2.7–12.2+ mm. The shock initiation of this lot is found to be consistent with Pop plots reported for other lots of PBX 9502. All data have been uploaded to the LANL Small Scale Database for use by the research community.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

FY18 J23X PDZG Final Report: Double Shock Initiation of PBX 9502 Lot HOL88H891-008

Heterogeneous high explosives subjected to sub-critical shock waves are known to exhibit desensitization to later shock inputs. While it is believed that this phenomenon is due to the removal of hot spot forming features in the explosive by the initial sub-critical shock, the effect of the time delay between the shocks is poorly understood. This report details a series of double shock plate impact experiments that vary the time between similar shocks to explore the time dependance of this shock desensitization process. These experiments were performed on the insensitive explosive PBX 9502 (95% TATB, 5% Kel-F 800) with lot number HOL88H891-008. The evolution of the shocks to a detonation was characterized by 9 embedded magnetic particle velocity gauges, and 116 embedded magnetic time of arrival gauges (AKA shock trackers). Photon Doppler velocimetry (PDV) with a LiF window was used at the back surface of the samples to capture the wave profile exiting the sample. Three double shock experiments were performed, with first and second shock pressures of 8.3 GPa and 16.5 GPa, respectively. An analogous single shock experiment at 16.3 GPa was also performed. The double shock experiments exhibited small levels of reaction during the initial shock,and shock desensitization to the second shock. Run distances after shock coalescence were shorter than those expected for a single shock, indicating the shock to detonation transition (SDT) process was slightly further along due to partial reaction in the first shock wave. These data will be used to calibrate model behavior under multiple-shock conditions. Additional double shock data will be collected to further explore this area in FY2019. All data have been uploaded to the LANL Small Scale Database for use by the research community.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗