Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Structure preservation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Further Study of near Solidus Intergranular Cracking in Inconel 718

A series of tests, performed to determine the strain necessary to initiate intergranular cracking in Inconel 718 as a function of temperature, contained enough scatter near the melting temperature that questions remained as to the best curve of curves to fit to the data. Fracture surface analysis showed that the scatter was due to incipient melting in the grain boundary region. The melting contributed to low fracture strain but had only a small on the incipient cracking strain. Gleeble tests, which could be interrupted by water quenching, were used to study the incipient intergranular melting of Inconel 718. This modified weld simulation test provided a sufficiently rapid quench to preserve the intergranular microstructure created during incipient melting. This structure was studied both microscopically and with energy dispensive X-ray analysis. The implications of incipient melting and low-strain incipient cracking on the development of microfissuring envelopes are discussed.

Thompson, R. G.↗
NASA NTRS2015

Overview of NASA FINESSE (Field Investigations to Enable Solar System Science and Exploration) Science and Exploration Results

NASA's FINESSE (Field Investigations to Enable Solar System Science and Exploration) project is focused on a science and exploration field-based research program to generate strategic knowledge in preparation for human and robotic exploration of other planetary bodies including our moon, Mars' moons Phobos and Deimos, and near-Earth asteroids. Scientific study focuses on planetary volcanism (e.g., the formation of volcanoes, evolution of magma chambers and the formation of multiple lava flow types, as well as the evolution and entrapment of volatile chemicals) and impact cratering (impact rock modification, cratering mechanics, and the chronologic record). FINESSE conducts multiple terrestrial field campaigns (Craters of the Moon National Monument and Preserve in Idaho for volcanics, and West Clearwater Impact Structure in Canada for impact studies) to study such features as analogs relevant to our moon, Phobos, Deimos, and asteroids. Here we present the science and exploration results from two deployments to Idaho (2014, 2015) and our first deployment to Canada (2014). FINESSE was selected as a research team by NASA's Solar System Exploration Research Virtual Institute (SSERVI). SSERVI is a joint effort by NASA's Science Mission Directorate (SMD) and Human Exploration and Operations Mission Directorate (HEOMD).

FINESSE↗
NASA NTRSDate not supplied

Direct Analysis of Early Solar System Aqueous Fluids

We lack fundamental information on early solar system aqueous fluids. Fluid inclusions are present in carbonates, sulfides and halides in astro materials, whose characterization is finally becoming feasible. The ordinary chondrite regolith breccias Monahans 1998 (H5) and Zag (H3-6)contain fluid inclusion-bearing halite (NaCl) crystals dated at~4.5 billion years old. Freezing studies to measure the eutectic temperature demonstrated that the brines likely contain divalent cations(Ca, Mg, Fe). Halite is effective at preservation (at least 250 MY) of organic phases and structures. Thus, compositional data on fluid inclusions in halite will reveal unique information on the origin and activity of aqueous fluids in the early solar system, and interactions with organics. To measure fluid compositions from individual fluid inclusions we performed TOF-SIMS depth profiling a tultra-high vacuum at ~110 Kusing a 30 kVBi+analysis ion beam and a1 kVO2+sputtering ion beam. Halite fluid inclusion FI1 contains H2O, K,Na,Cl and NaCl•2H2O.FI2 contains H2O, K, Na, Cl, Al, Fe,Ca,NaCl•2H2O and C-N-O-H species originating from organic molecules. Mass overlap with NaOH species prevented definitive identification of Cain FI1.

M. E Zolensky↗
NASA NTRS2025

Laminae as Structural Biosignatures in NASA’s Life Detection Knowledge Base

Laminae are millimeter-scale features in rocks created by physiochemical processes that can be influenced by the presence and activities of communities of organisms that occur as biofilms and microbial mats. The structure and composition of laminae reflect the processes involved in their formation and can be preserved in the rock record over geologic time, however diagenetic and metamorphic alteration can lead to the loss of primary information and confusion over the interpretation of their origins. As potential records of ancient life, laminae can preserve evidence of microbial activity over billions of years of Earth’s history. On planetary bodies beyond Earth, laminae in sedimentary rocks are the most common sedimentary structure and represent significant features of interest that can record habitable conditions (e.g., the presence of liquid water) at the time of their formation. Here we review the significance of laminae as targets for astrobiological exploration. We discuss common mechanisms by which laminae form in natural environments on Earth, present arguments and evidence for laminae as biosignatures, and describe how such information is incorporated into the NASA Life Detection Knowledge Base.

Astrobiology↗
NASA NTRS2004

Investigation Organizer

Contents include the folloving:Overview of the Application; Input Data; Analytical Process; Tool's Output; and Application of the Results of the Analysis.The tool enables the first element through a Web-based application that can be accessed by distributed teams to store and retrieve any type of digital investigation material in a secure environment. The second is accomplished by making the relationships between information explicit through the use of a semantic network-a structure that literally allows an investigator or team to "connect -the-dots." The third element, the significance of the correlated information, is established through causality and consistency tests using a number of different methods embedded within the tool, including fault trees, event sequences, and other accident models. And finally, the evidence gathered and structured within the tool can be directly, electronically archived to preserve the evidence and investigative reasoning.

Panontin, Tina↗
NASA NTRS2016

Development of a Subcell Based Modeling Approach for Modeling the Architecturally Dependent Impact Response of Triaxially Braided Polymer Matrix Composites

Understanding the high velocity impact response of polymer matrix composites with complex architectures is critical to many aerospace applications, including engine fan blade containment systems where the structure must be able to completely contain fan blades in the event of a blade-out. Despite the benefits offered by these materials, the complex nature of textile composites presents a significant challenge for the prediction of deformation and damage under both quasi-static and impact loading conditions. The relatively large mesoscale repeating unit cell (in comparison to the size of structural components) causes the material to behave like a structure rather than a homogeneous material. Impact experiments conducted at NASA Glenn Research Center have shown the damage patterns to be a function of the underlying material architecture. Traditional computational techniques that involve modeling these materials using smeared homogeneous, orthotropic material properties at the macroscale result in simulated damage patterns that are a function of the structural geometry, but not the material architecture. In order to preserve heterogeneity at the highest length scale in a robust yet computationally efficient manner, and capture the architecturally dependent damage patterns, a previously-developed subcell modeling approach where the braided composite unit cell is approximated as a series of four adjacent laminated composites is utilized. This work discusses the implementation of the subcell methodology into the commercial transient dynamic finite element code LS-DYNA (Livermore Software Technology Corp.). Verification and validation studies are also presented, including simulation of the tensile response of straight-sided and notched quasi-static coupons composed of a T700/PR520 triaxially braided [0deg/60deg/-60deg] composite. Based on the results of the verification and validation studies, advantages and limitations of the methodology as well as plans for future work are discussed.

finite element method↗
NASA NTRS2011

Fabrication and Test of an Optical Magnetic Mirror

Traditional mirrors at optical wavelengths use thin metalized or dielectric layers of uniform thickness to approximate a perfect electric field boundary condition. The electron gas in such a mirror configuration oscillates in response to the incident photons and subsequently re-emits fields where the propagation and electric field vectors have been inverted and the phase of the incident magnetic field is preserved. We proposed fabrication of sub-wavelength-scale conductive structures that could be used to interact with light at a nano-scale and enable synthesis of the desired perfect magnetic-field boundary condition. In a magnetic mirror, the interaction of light with the nanowires, dielectric layer and ground plate, inverts the magnetic field vector resulting in a zero degree phase shift upon reflection. Geometries such as split ring resonators and sinusoidal conductive strips were shown to demonstrate magnetic mirror behavior in the microwave and then in the visible. Work to design, fabricate and test a magnetic mirror began in 2007 at the NASA Goddard Space Flight Center (GSFC) under an Internal Research and Development (IRAD) award Our initial nanowire geometry was sinusoidal but orthogonally asymmetric in spatial frequency, which allowed clear indications of its behavior by polarization. We report on the fabrication steps and testing of magnetic mirrors using a phase shifting interferometer and the first far-field imaging of an optical magnetic mirror.

Hagopian, John G.↗
NASA NTRSDate not supplied

Isotopic Tracers for CO 2 Produced During A Planetary Impact Into Limestone Target Rocks

Terrestrial meteorite impacts have been directly linked with multiple mass extinction events throughout Earth’s history. Among these impacts, those that land in sedimentary target rocks are thought to generate large quantities of CO 2 via decarbonation. This injection of CO 2 into the atmosphere has the potential to alter the climate and threaten terrestrial habitability. The magnitude of this change depends upon the net amount of CO 2 released, which is controlled by how much CO 2 is produced by the impact, how much CO 2 is removed by back-reactions after the impact, and other post-impact CO 2 sinks. To interrogate the behavior of CO 2 release into the impact atmosphere, we present carbon (δ 13 C), oxygen (δ 18 O), and clumped (Δ 47 ) isotope results from carbonate clasts preserved within the impact breccia of the Steen River Impact Structure (SRIS) in Alberta, Canada. These clasts exhibit a ~65‰ range in δ 13 C and a ~5‰ variation in δ 18 O. However, while δ 13 C and δ 18 O are positively correlated, Δ 47 unexpectedly has a negative relationship with δ 13 C and δ 18 O. Based on prior assumptions, there would either be (1) no relationship with carbonate Δ 47 and the bulk ratios because Δ 47 would be reset at extreme impact temperatures, or (2) Δ 47 would have a positive correlation with the bulk ratios, reflecting gradual Δ 47 ‘resetting.’ To reconcile the SRIS result with these expectations, we conducted a series of in vacuo heating experiments at temperatures above calcite decomposition. As predicted by Rayleigh fractionation, these heating experiments generated depletions in δ 13 C and δ 18 O that increased with reaction time. Mimicking the SRIS results, these experiments also produced concomitant increases in Δ 47 . Using an adaptation of a mechanistic model for decomposition fractionation (Hayles & Killingsworth, 2022) we hypothesize that these exotic isotope trends are caused by Rayleigh fractionation and a Δ 47 kinetic isotope effect that results from the disproportionation of O to CaO and CO 2 during thermal decomposition. This high Δ 47 CO 2 subsequently exchanges with the residual CaCO 3 . This work highlights a potential pathway for identifying and quantifying CO 2 generation by impacts and builds on the relatively limited literature characterizing the behavior of carbonate clumped isotopes at very high geologic temperatures.

Multi-isotope systems↗
NASA NTRS2015

In Situ Detection of Organic Molecules on the Martian Surface With the Mars Organic Molecule Analyzer (MOMA) on Exomars 2018

The Mars Organic Molecule Analyzer (MOMA) investigation on the 2018 ExoMars rover will examine the chemical composition of samples acquired from depths of up to two meters below the martian surface, where organics may be protected from radiative and oxidative degradation. The MOMA instrument is centered around a miniaturized linear ion trap (LIT) that facilitates two modes of operation: i) pyrolysisgas chromatography mass spectrometry (pyrGC-MS); and, ii) laser desorptionionization mass spectrometry (LDI-MS) at ambient Mars pressures. The LIT also enables the structural characterization of complex molecules via complementary analytical capabilities, such as multi-frequency waveforms (i.e., SWIFT) and tandem mass spectrometry (MSMS). When combined with the complement of instruments in the rovers Pasteur Payload, MOMA has the potential to reveal the presence of a wide range of organics preserved in a variety of mineralogical environments, and to begin to understand the structural character and potential origin of those compounds.

ExoMars2018↗
NASA NTRS1990

Application of Lanczos vectors to control design of flexible structures

This report covers research conducted during the first year of the two-year grant. The research, entitled 'Application of Lanczos Vectors to Control Design of Flexible Structures' concerns various ways to obtain reduced-order mathematical models for use in dynamic response analyses and in control design studies. This report summarizes research described in several reports and papers that were written under this contract. Extended abstracts are presented for technical papers covering the following topics: controller reduction by preserving impulse response energy; substructuring decomposition and controller synthesis; model reduction methods for structural control design; and recent literature on structural modeling, identification, and analysis.

Craig, Roy R., Jr.↗
NASA NTRS1992

An inverse problem approach for structural damage detection - Finite element model refinement

In this work, a methodology for incorporating measured modal data into an existing refined finite element model is examined with the objective of detecting and locating structural damage. This same algorithm is also useful in terms of finite element model refinement. The algorithm is based on the partial inverse problem, in that only partial spectral information is required. The technique utilizes a symmetric eigenstructure assignment algorithm to perform the partial spectral assignment. Algorithms to enhance mode shape assignability and to preserve sparsity in the updated model are developed. The sparsity preservation is of particular importance when considering damage detection in truss-like structures. Several examples are presented which highlight the key points made within the paper.

Zimmerman, D. C.↗
NASA NTRS1986

Ada Structure Design Language (ASDL)

An artist acquires all the necessary tools before painting a scene. In the same analogy, a software engineer needs the necessary tools to provide their design with the proper means for implementation. Ada provide these tools. Yet, as an artist's painting needs a brochure to accompany it for further explanation of the scene, an Ada design also needs a document along with it to show the design in its detailed structure and hierarchical order. Ada could be self-explanatory in small programs not exceeding fifty lines of code in length. But, in a large environment, ranging from thousands of lines and above, Ada programs need to be well documented to be preserved and maintained. The language used to specify an Ada document is called Ada Structure Design Language (ASDL). This language sets some rules to help derive a well formatted Ada detailed design document. The rules are defined to meet the needs of a project manager, a maintenance team, a programmer and a systems designer. The design document templates, the document extractor, and the rules set forth by the ASDL are explained in detail.

Chedrawi, Lutfi↗
NASA NTRS1983

Structural optimization by multilevel decomposition

A method is described for decomposing an optimization problem into a set of subproblems and a coordination problem which preserves coupling between the subproblems. The method is introduced as a special case of multilevel, multidisciplinary system optimization and its algorithm is fully described for two level optimization for structures assembled of finite elements of arbitrary type. Numerical results are given for an example of a framework to show that the decomposition method converges and yields results comparable to those obtained without decomposition. It is pointed out that optimization by decomposition should reduce the design time by allowing groups of engineers, using different computers to work concurrently on the same large problem.

Sobieszczanski-Sobieski, J.↗
NASA NTRS2019

Outstanding Natural Occurrence of TiO2-II at the Chicxulub Crater - Anatomy of A Shock-Produced High-Pressure Polymorph

Scientific drilling of the end-Cretaceous, approximately 180 kilometers-diameter Chicxulub crater (Yucatan Peninsula, Mexico) during IODP–ICDP (Integrated Ocean Drilling Program - International Continental Scientific Drilling Program) Expedition 364 has provided new insights into the formation, shock metamorphism, structural evolution, and thermal history of peak rings in large complex impact craters. An outstanding feature in uplifted granitoid rocks of the Chicxulub peak ring is the preservation of TiO2-II, an orthorhombic high-pressure polymorph of TiO2 with an alpha-PbO2 structure, produced during the impact from rutile and/or anatase at shock pressures of approximately 12.5-17.5 gigapascals. Unlike other mostly micro- and cryptocrystalline occurrences of TiO2-II at terrestrial impact sites, ejecta deposits, and in rare ultra-high pressure metamorphic rocks, TiO2-II at Chicxulub occurs as abundant euhedral crystals greater than or equal to 70 microns in size within aggregates of altered magmatic titanite. This mode of occurrence provides an excellent opportunity to investigate the crystallography and transformation kinetics of the shock-produced high-pressure polymorph using scanning electron microscopic, micro-Raman, electron backscatter diffraction (EBSD), focused ion beam (FIB), as well as transmission-EBSD and transmission electron microscopic (TEM) techniques. Here we present refined microstructural and new crystallographic results for TiO2-II at the Chicxulub crater.

Schmieder, Martin↗
NASA NTRS1983

Bathymetry estimates in the southern oceans from Seasat altimetry

A 70-day Seasat altimeter set, where altitude was determined by the delay of a radar signal before return, was high pass filtered to obtain bathymetric data on the southern ocean. Variations were estimated over cross-track passages over the same points, and longer wavelength effects were removed to reveal the shorter wavelength geoid features. Edge effects near land, subtle geoid structure features at continental margins, smaller boundary seas, and lakes were preserved by the high pass filter, which involved substracting a constant height from each 6 x 6 deg square region. A volcanic origin was indicated for the nearly continuous Louisville Ridge, which had a major elongate plateau or positive gravity anomaly located just eastward and running east-west. A large Conrad Ridge was found in the Indian Ocean, compared to previous charts. The Indian Ocean was also found to contain more rises and plateaus than previously mapped.

Dixon, T. H.↗
NASA NTRS2009

The Moon is a Planet Too: Lunar Science and Robotic Exploration

This slide presentation reviews some of what is known about the moon, and draws parallels between the moon and any other terrestrial planet. The Moon is a cornerstone for all rocky planets The Moon is a terrestrial body, formed and evolved similarly to Earth, Mars, Mercury, Venus, and large asteroids The Moon is a differentiated body, with a layered internal structure (crust, mantle, and core) The Moon is a cratered body, preserving a record of bombardment history in the inner solar system The Moon is an active body, experiencing moonquakes, releasing primordial heat, conducting electricity, sustaining bombardment, and trapping volatile molecules Lunar robotic missions provide early science return to obtain important science and engineering objectives, rebuild a lunar science community, and keep our eyes on the Moon. These lunar missions, both past and future are reviewed.

Cohen, Barbara A.↗
NASA NTRS2014

Assessment of Shape Memory Alloys - From Atoms To Actuators - Via In Situ Neutron Diffraction

As shape memory alloys (SMAs) become an established actuator technology, it is important to identify the fundamental mechanisms responsible for their performance by understanding microstructure performance relationships from processing to final form. Yet, microstructural examination of SMAs at stress and temperature is often a challenge since structural changes occur with stress and temperature and microstructures cannot be preserved through quenching or after stress removal, as would be the case for conventional materials. One solution to this dilemma is in situ neutron diffraction, which has been applied to the investigation of SMAs and has offered a unique approach to reveal the fundamental micromechanics and microstructural aspects of bulk SMAs in a non-destructive setting. Through this technique, it is possible to directly correlate the micromechanical responses (e.g., internal residual stresses, lattice strains), microstructural evolutions (e.g., texture, defects) and phase transformation properties (e.g., phase fractions, kinetics) to the macroscopic actuator behavior. In this work, in situ neutron diffraction was systematically employed to evaluate the deformation and transformation behavior of SMAs under typical actuator conditions. Austenite and martensite phases, yield behavior, variant selection and transformation temperatures were characterized for a polycrystalline NiTi (49.9 at. Ni). As the alloy transforms under thermomechanical loading, the measured textures and lattice plane-level variations were directly related to the cyclic actuation-strain characteristics and the dimensional instability (strain ratcheting) commonly observed in this alloy. The effect of training on the shape memory characteristics of the alloy and the development of two-way shape memory effect (TWSME) were also assessed. The final conversion from a material to a useful actuator, typically termed shape setting, was also investigated in situ during constrained heatingcooling and subsequent shape recovery experiments. Neutron diffraction techniques are also being applied to the investigation of novel high temperature SMAs with the objective of designing alloys with better stability, higher transition temperatures and ultimately superior durability.

Shape Memory Alloys↗
NASA NTRS2015

Structured Overlapping Grid Simulations of Contra-rotating Open Rotor Noise

Computational simulations using structured overlapping grids with the Launch Ascent and Vehicle Aerodynamics (LAVA) solver framework are presented for predicting tonal noise generated by a contra-rotating open rotor (CROR) propulsion system. A coupled Computational Fluid Dynamics (CFD) and Computational AeroAcoustics (CAA) numerical approach is applied. Three-dimensional time-accurate hybrid Reynolds Averaged Navier-Stokes/Large Eddy Simulation (RANS/LES) CFD simulations are performed in the inertial frame, including dynamic moving grids, using a higher-order accurate finite difference discretization on structured overlapping grids. A higher-order accurate free-stream preserving metric discretization with discrete enforcement of the Geometric Conservation Law (GCL) on moving curvilinear grids is used to create an accurate, efficient, and stable numerical scheme. The aeroacoustic analysis is based on a permeable surface Ffowcs Williams-Hawkings (FW-H) approach, evaluated in the frequency domain. A time-step sensitivity study was performed using only the forward row of blades to determine an adequate time-step. The numerical approach is validated against existing wind tunnel measurements.

Grid↗