SEARCH · Engineering Papers

Results for “Star Tracker”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Orbiting Astronomical Observatory (OAO-A2) stabilization and control subsystem

The OAO was successfully operating for approximately 11 months and has made over 2500 stellar observations. The OAO control system was a complex system which takes the 4500-lb vehicle through initial stabilization to star tracker control where a pointing accuracy of less than 1 arc minute was achieved. To obtain this pointing accuracy, the system used six orthogonally mounted gimbaled star trackers. The trackers were two gimbaled devices, having a 1-deg field of view with a + or - 43 deg gimbal excursion. The tracker could recognize and track 2.0 magnitude stars or brighter. The flight results indicated spacecraft pointing accuracies of less than 1 arc minute after tracker calibration with spacecraft jitter less than 3 arc seconds.

Huber, T. E.↗

NASA NTRS1980

Stabilization and control of the International Ultraviolet Explorer including a summary of flight performance

The paper discusses the International Ultraviolet Explorer Mission sequence, spacecraft equipment, and control laws. Flight data from the precision control modes are presented, to illustrate the performance achieved; the subarc second pointing at sources for 60 min periods is accomplished routinely. Two modes of precision control are available: one is of a bright guide star which is in the vicinity of the target source, so that the guidance mode includes a star tracker for position information and a gyro system for rate damping. When a guide star is not available, precision hold is accomplished solely on a well trimmed gyro reference with low frequency updates from a dim source. The three axis maneuvers, the maneuver angle, and the gyro data used are discussed, concluding that these data used in conjunction with star tracker data provide a good source of information for orbital performance evaluation.

Moore, J. V.↗

NASA NTRS2018

Imaging X-Ray Polarimetry Explorer Mission Attitude Determination and Control Concept

The goal of the Imaging X-Ray Polarimetry Explorer (IXPE) Mission is to expand understanding of high-energy astrophysical processes and sources, in support of NASA's first science objective in Astrophysics: "Discover how the universe works." X-ray polarimetry is the focus of the IXPE science mission. Polarimetry uniquely probes physical anisotropies-ordered magnetic fields, aspheric matter distributions, or general relativistic coupling to black-hole spin-that are not otherwise measurable. The IXPE Observatory consists of Spacecraft and Payload modules. The Payload includes three polarization sensitive, X-ray detector units (DU), each paired with its corresponding grazing incidence mirror module assemblies (MMA). A deployable boom provides the correct separation (focal length) between the DUs and MMAs. These Payload elements are supported by the IXPE Spacecraft. A star tracker is mounted directly with the deployed Payload to minimize alignment errors between the star tracker line of sight (LoS) and Payload LoS. Stringent pointing requirements coupled with a flexible structure and a non-collocated attitude sensor-actuator configuration requires a thorough analysis of control-structure interactions. A non-minimum phase notch filter supports robust control loop stability margins. This paper summarizes the IXPE mission science objectives and Observatory concepts, and then it describes IXPE attitude determination and control implementation. IXPE LoS pointing accuracy, control loop stability, and angular momentum management are discussed.

Attitude Determination and Contro↗

NASA NTRS2018

High Fidelity Reconstructed Attitude Estimation Using Cassini Flight Telemetry

The Cassini Grand Finale capped the 20 year Cassini mission with 22 one-week-long orbits each with periapsis inside the ring plane just above Saturn’s cloud tops. One aspect of these remarkable orbits was unprecedented measurements of Saturn’s magnetic field very close to the planet. Processing this data required precise estimates of Cassini’s orientation during these ring plane crossings. These periods coincided with planned gyro-only attitude propagation due to the enormous bright bodies in the star tracker field-of-view. This paper describes how attitude reacquisition information, when the star tracker reacquires an absolute inertial reference, can be used to correct errors introduced during gyro-only propagation. The resulting high fidelity reconstruction significantly improves the extraction of Saturn’s magnetic field from the raw data obtained during gyro-only periods when Cassini’s changing orientation makes precise attitude estimation a challenge.

Burk, Thomas A.↗

NASA NTRS1999

Backup Attitude Control Algorithms for the MAP Spacecraft

The Microwave Anisotropy Probe (MAP) is a follow-on to the Differential Microwave Radiometer (DMR) instrument on the Cosmic Background Explorer (COBE) spacecraft. The MAP spacecraft will perform its mission, studying the early origins of the universe, in a Lissajous orbit around the Earth-Sun L(sub 2) Lagrange point. Due to limited mass, power, and financial resources, a traditional reliability concept involving fully redundant components was not feasible. This paper will discuss the redundancy philosophy used on MAP, describe the hardware redundancy selected (and why), and present backup modes and algorithms that were designed in lieu of additional attitude control hardware redundancy to improve the odds of mission success. Three of these modes have been implemented in the spacecraft flight software. The first onboard mode allows the MAP Kalman filter to be used with digital sun sensor (DSS) derived rates, in case of the failure of one of MAP's two two-axis inertial reference units. Similarly, the second onboard mode allows a star tracker only mode, using attitude and derived rate from one or both of MAP's star trackers for onboard attitude determination and control. The last backup mode onboard allows a sun-line angle offset to be commanded that will allow solar radiation pressure to be used for momentum management and orbit stationkeeping. In addition to the backup modes implemented on the spacecraft, two backup algorithms have been developed in the event of less likely contingencies. One of these is an algorithm for implementing an alternative scan pattern to MAP's nominal dual-spin science mode using only one or two reaction wheels and thrusters. Finally, an algorithm has been developed that uses thruster one shots while in science mode for momentum management. This algorithm has been developed in case system momentum builds up faster than anticipated, to allow adequate momentum management while minimizing interruptions to science. In this paper, each mode and algorithm will be discussed, and simulation results presented.

ODonnell, James R., Jr.↗

NASA NTRS2018

Mission Summary of Cassini Spacecraft Guidance and Control Hardware Health and Performance

The Cassini-Huygens mission ended on September 15, 2017, after nearly two decades in ight. The well-designed Cassini spacecraft had robust hardware that permitted two extended missions, lasting nine years longer than the expected prime mission. At the end of the mission, the Attitude and Articulation Control Subsystem (AACS) was using two pieces of redundant back-up of hardware, one reaction wheel and the hydrazine thruster branch, due to hardware anomalies earlier in the mission. The back-up hardware performed nominally through the rest of mission. The prime reaction wheels at the end of the mission had reached more than 130% of the consumable limit for number of revolutions. No thruster on either thruster branch accumulated more than 45% of the consumable limits. The inertial reference unit slightly exceeded the pre-launch requirements on bias error, but as the software continuously estimated this value in ight, the attitude estimation was not adversely a ected. The star trackers performed nominally, and though there was a spacecraft anomaly in 1998 related to the star trackers, the origin was not in hardware itself. The Sun sensors and accelerometer both performed as expected and met all requirements throughout the mission. Ultimately, the lifetime of the Cassini spacecraft was not limited by hardware performance. Planetary protection requirements necessitated the end of the mission as the spacecraft's propellant reserves depleted, and Cassini plunged into Saturn's atmosphere with a healthy attitude control system.

Stupik, Joan↗

NASA NTRS1980

Spectral evidence for a carbonaceous chondrite surface composition on Deimos

The surface compositions of Phobos and Deimos as determined by their UV-visible reflectance are compared in order to evaluate the hypothesis that the different surface morphologies of the two satellites are due to different mechanical properties. The UV-visible reflectance spectrum of Deimos is compiled from Mariner 9 UV spectrometry and Canopus star tracker photometry and ground-based colorimetry and polarimetry; the geometric albedo of Deimos is determined from Mariner 9 Canopus star tracker data. The reflectance spectra of Deimos and Phobos are found to be similar in a first approximation, exhibiting low, flat reflectivities in the visible and dropping off sharply in the UV, compatible with a probable carbonaceous chondrite nature for Deimos as well as Phobos and suggesting that their different surface morphologies are most likely due to different orbital histories.

Pang, K. D.↗

NASA NTRS2007

Quaternion Averaging

Many applications require an algorithm that averages quaternions in an optimal manner. For example, when combining the quaternion outputs of multiple star trackers having this output capability, it is desirable to properly average the quaternions without recomputing the attitude from the the raw star tracker data. Other applications requiring some sort of optimal quaternion averaging include particle filtering and multiple-model adaptive estimation, where weighted quaternions are used to determine the quaternion estimate. For spacecraft attitude estimation applications, derives an optimal averaging scheme to compute the average of a set of weighted attitude matrices using the singular value decomposition method. Focusing on a 4-dimensional quaternion Gaussian distribution on the unit hypersphere, provides an approach to computing the average quaternion by minimizing a quaternion cost function that is equivalent to the attitude matrix cost function Motivated by and extending its results, this Note derives an algorithm that deterniines an optimal average quaternion from a set of scalar- or matrix-weighted quaternions. Rirthermore, a sufficient condition for the uniqueness of the average quaternion, and the equivalence of the mininiization problem, stated herein, to maximum likelihood estimation, are shown.

Markley, F. Landis↗

NASA NTRS2005

Line of Sight Stabilization of James Webb Space Telescope

The James Webb Space Telescope (JWST) builds upon the successful flight experience of the Chandra Xray Telescope by incorporating an additional LOS pointing servo to meet the more stringent pointing requirements. The LOS pointing servo, referred to in JWST as the Fine Guidance Control System (FGCS), will utilize a Fine Guidance Sensor (FGS) as the sensor, and a Fine Steering Mirror (FSM) as the actuator. The FSM is a part of the Optical Telescope Element (OTE) and is in the optical path between the tertiary mirror and the instrument focal plane, while the FGS is part of the Integrated Science Instrument Module (ISIM). The basic Chandra spacecraft bus attitude control and determination architecture, utilizing gyros, star trackers/aspect camera, and reaction wheels, is retained for JWST. This system has achieved pointing stability of better than 0.5 arcseconds. To reach the JWST requirements of milli-arcsecond pointing stability with this ACS hardware, the local FGCS loop is added to the optical path. The FGCS bandwidth is about 2.0 Hz and will therefore attenuate much of the spacecraft ACS induced low frequency jitter. In order to attenuate the higher frequency (greatet than 2.0 Hz) disturbances associated with reaction wheel static and dynamic imbalances, as well as bearing run-out, JWST will employ a two-stage passive vibration isolation system consisting of (1) 7.0 Hz reaction wheel isolators between each reaction wheel and the spacecraft bus, and (2) a 1.0 Hz tower isolator between the spacecraft bus and the Optical Telescope Element (OTE). In order to sense and measure the LOS, the FGS behaves much like an autonomous star tracker that has a very small field of view and uses the optics of the telescope. It performs the functions of acquisition, identification and tracking of stars in its 2.5 x 2.5 arcminute field of view (FOV), and provides the centroid and magnitude of the selected star for use in LOS control. However, since only a single star is being tracked at any time within the FGS FOV there is only tip and tilt information; rotation about the FGS LOS will not be sensed. The FGCS uses the FSM to move the guide star within the FGS FOV and place the centroid of the guide star at any desired position within the FGS focal plane. Using this architecture allows the FGCS to correct the low frequency LOS jitter that is induced by the spacecraft ACS in pitch and yaw, and achieve the milli-arcsecond pointing stability required by JWST. The less stringent ISIM FOV roll performance will be provided solely by the ACS, using the spacecraft gyros and star trackers. Since the FSM is in the optical path, the pointing stabilrty of a science object in any of the instruments will be similar to that of the guide star LOS.

Meza, Luis↗

NASA NTRS1967

Scientific programming

Scientific programming of transformations of direction fields and autonomous systems of ordinary differential equations - Optimization of electron-optical potential for star tracker

STAR TRACKER↗

NASA NTRS1997

Star Identification Without Attitude Knowledge: Testing with X-Ray Timing Experiment Data

As the budget for the scientific exploration of space shrinks, the need for more autonomous spacecraft increases. For a spacecraft with a star tracker, the ability to determinate attitude from a lost in space state autonomously requires the capability to identify the stars in the field of view of the tracker. Although there have been efforts to produce autonomous star trackers which perform this function internally, many programs cannot afford these sensors. The author previously presented a method for identifying stars without a priori attitude knowledge specifically targeted for onboard computers as it minimizes the necessary computer storage. The method has previously been tested with simulated data. This paper provides results of star identification without a priori attitude knowledge using flight data from two 8 by 8 degree charge coupled device star trackers onboard the X-Ray Timing Experiment.

Ketchum, Eleanor↗

NASA NTRS1978

Aspect system for HEAO-B

The aspect system for the HEAO-B Observatory provides the necessary absolute referencing of the Observatory coordinates to the celestial sphere with a precision of one arc second. In addition, it provides realtime data to the Spacecraft to permit pointing of the Observatory to one arc minute. The system is composed of three star trackers with associated shades, a pair of bright object detectors and a fiducial light system for referencing the experiment X-ray axis to the star tracker axes.

Koch, D.↗

NASA NTRS1971

A stellar tracking reference system

A stellar attitude reference system concept for satellites was studied which promises to permit continuous precision pointing of payloads with accuracies of 0.001 degree without the use of gyroscopes. It is accomplished with the use of a single, clustered star tracker assembly mounted on a non-orthogonal, two gimbal mechanism, driven so as to unwind satellite orbital and orbit precession rates. A set of eight stars was found which assures the presence of an adequate inertial reference on a continuous basis in an arbitrary orbit. Acquisition and operational considerations were investigated and inherent reference redundancy/reliability was established. Preliminary designs for the gimbal mechanism, its servo drive, and the star tracker cluster with its associated signal processing were developed for a baseline sun-synchronous, noon-midnight orbit. The functions required of the onboard computer were determined and the equations to be solved were found. In addition detailed error analyses were carried out, based on structural, thermal and other operational considerations.

Klestadt, B.↗

NASA NTRS1973

Satellite attitude control simulations

Work was conducted to develop an extremely low drift rate gyroscope and a very precise star tracker. A proposed relativity satellite will measure very accurately the theoretically predicted 'relativistic' precession of the gyroscope relative to an inertial reference frame provided by the star tracker. Aspects of precision spinning attitude control are discussed together with questions of gyro operation, and the hopping mode for lunar transportation. For the attitude control system of the lunar hopper, a number of control laws were investigated. The studies indicated that some suboptimal controls should be adequate for the system.

Debra, D. B.↗

NASA NTRS1977

All sky pointing attitude control system

In a strapped-down gyroscope space vehicle attitude control system, a method and apparatus are provided for gyro drift and input axis misalignment error compensation employing a sun and a star tracker and preselected vehicle calibration maneuvers. The outputs of two-axis strapped-down gyroscopes nominally aligned with the optical axis of the sun and star trackers are measured to provide gyro drift calibration, roll, pitch and yaw axis scale factors and values corresponding to the degree of nonorthogonality between the roll axis and the pitch and yaw gyro input axes and the nonorthogonality of the roll and pitch axes relative to the yaw axis. The vehicle is then rolled and yawed through precomputed angles as modified by the calibrated data stored in a digital computer, and acquires a target without recourse to external references.

Lorell, K. R.↗

NASA NTRS1999

Submillimeter Wave Astronomy Satellite (SWAS) Launch and Early Orbit Support Experiences

The Submillimeter Wave Astronomy Satellite (SWAS) was successfully launched on December 6, 1998 at 00:58 UTC. The two year mission is the fourth in the series of Small Explorer (SMEX) missions. SWAS is dedicated to the study of star formation and interstellar chemistry. SWAS was injected into a 635 km by 650 km orbit with an inclination of nearly 70 deg by an Orbital Sciences Corporation Pegasus XL launch vehicle. The Flight Dynamics attitude and navigation teams supported all phases of the early mission. This support included orbit determination, attitude determination, real-time monitoring, and sensor calibration. This paper reports the main results and lessons learned concerning navigation, support software, star tracker performance, magnetometer and gyroscope calibrations, and anomaly resolution. This includes information on spacecraft tip-off rates, first-day navigation problems, target acquisition anomalies, star tracker anomalies, and significant sensor improvements due to calibration efforts.

Kirschner, S.↗

NASA NTRS1999

Submillimeter Wave Astronomy Satellite (SWAS) Launch and Early Orbit Support Experiences

Kirschner, S.↗

NASA NTRS1977

Image dissector photocathode solar damage test program

Image dissector sensors of the same type which will be used in the NASA shuttle star tracker were used in a series of tests directed towards obtaining solar radiation/time damage criteria. Data were evaluated to determine the predicted level of operability of the star tracker if tube damage became a reality. During the test series a technique for reducing the solar damage effect was conceived and verified. The damage concepts are outlined and the test methods and data obtained which were used for verification of the technique's feasibility are presented. The ability to operate an image dissector sensor with the solar image focussed on the photocathode by a fast optical lens under certain conditions is feasible and the elimination of a mechanical protection device is possible.

Smith, R. A.↗