Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Spinel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

High-temperature X-ray diffraction study of crystallization and phase segregation on spinel-type lithium manganese oxides

To study crystallization process of spinel-type Li{sub 1+x}Mn{sub 2-x}O{sub 4}, in-situ high-temperature X-ray diffraction technique (HT-XRD) was utilized for the mixture consisting of Li{sub 2}CO{sub 3} and Mn{sub 2}O{sub 3} as starting material in the temperature range of 25-700 deg. C. In-situ HT-XRD analysis directly revealed that crystallization process of Li{sub 1+x}Mn{sub 2-x}O{sub 4} was significantly affected by the difference in the Li/Mn molar ratio in the precursor. Single phase of stoichiometric LiMn{sub 2}O{sub 4} formed at 700 deg. C. The formation of single phase of spinel was achieved at the lower temperature than the stoichiometric sample as Li/Mn molar ratio in the precursor increased. Lattice parameter of the stoichiometric LiMn{sub 2}O{sub 4} at 25 deg. C was 8.24 A and expanded to 8.31 A at 700 deg. C, which corresponds to the approximately 3% expansion in the unit cell volume. From the slope of the lattice parameter change as a function of temperatures, linear thermal expansion coefficient of the stoichiometric LiMn{sub 2}O{sub 4} was calculated to be 1.2x10{sup -5} deg. C{sup -1} in this temperature range. When the Li/Mn molar ratio in Li{sub 1+x}Mn{sub 2-x}O{sub 4} increased (x > 0.1), the spinel phase segregated into the Li{sub 1+y}Mn{sub 2-y}O{sub 4} (x > y) and Li{sub 2}MnO{sub 3} during heating, which involved the oxygen loss from the materials. During the cooling process from 700 deg. C, and the segregated phase merged into Li{sub 1+x}Mn{sub 2-x}O{sub 4} with oxygen incorporation. Such trend directly observed by in-situ HT-XRD was supported by thermal gravimetric analysis as reversible weight (oxygen) loss/gain at higher temperature (500-700 deg. C). - Graphical abstract: Non-linear variation of lattice parameters of the Li excess LiMn{sub 2}O{sub 4} spinels was observed during cooling process from 700 to 25 deg. C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The kinetics of Al-Si spinel phase crystallization from calcined kaolin

The crystallization of Al-Si spinel from medium ordered kaolin with high content of kaolinite was investigated using the differential thermal analysis (DTA). The apparent activation energy of the process was evaluated from the dependence of exothermic peak of crystallization on heating rate. Within the applied interval of heating rate (1-40 K min{sup -1}) the temperature of peak maximum increases from initial value of 1220.5 K in about 54.2 K. The apparent activation energy of the process 856{+-}2 kJ mol{sup -1}was calculated using the Kissinger equation. The growth morphology of Al-Si spinel crystal was evaluated from the Avrami parameter. The average value of morphology parameter determined within the observed interval of heating rate is 3.08{+-}0.03. This value indicates that crystallization mechanism of Al-Si spinel phase proceeds by bulk nucleation of the new phase with constant number of nuclei and that the three-dimensional growth of crystals is controlled by the reaction rate on the phases interface. - Graphical abstract: Kinetics of crystallization of Al-Si spinel from calcined kaolin was investigated by the DTA using the Kissinger kinetic approach. The apparent activation energy and morphology parameter of the process is 856{+-}2 kJ mol{sup -1} and 3.08{+-}0.03, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mid-infrared spectroscopic study of crystallization of cubic spinel phase from metakaolin

The structural changes during thermal conversion of metakaolinite into cubic spinel phase that was in literature considered as Al-Si spinel or {gamma}-Al{sub 2}O{sub 3} were investigated by mid-infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC) using medium ordered kaolin with high content of kaolinite. Spectrum features were studied in the mid-infrared region from 4000 to 400 cm{sup -1} as function of fractional conversion that resulted from DSC experiments. The increasing contends of Al-O bonds in the octahedral position (AlO{sub 6}) was observed during thermal transformation. The high ratio of antisymmetric stretching of {identical_to}Si-O-Al= and {identical_to}Si-O-Si{identical_to} bands and bands belonging to stretching of =Al-O bonds in the (AlO{sub 4}) tetrahedra and (AlO{sub 6}) octahedra decreases exponentially with fractional conversion. The antisymmetric stretching band of {identical_to}Si-O-Si{identical_to} bond in the (SiO{sub 4}) tetrahedra becomes more expressive due to formation of amorphous SiO{sub 2} phase. - Graphical abstract: The thermal conversion of metakaolinite into spinel phase was investigated by mid-infrared spectroscopy to found relationship between bands features and fractional convesrion. Highlights: > Formation of spinel phase from metakaolinite was studied by FT-IR. > Relationship between spectrum features and fractional conversion was investigated. > Intensity ratios of (AlO{sub 4}) and (AlO{sub 6}) decreases exponentially. > Antisymmetric stretching of (SiO{sub 4}) becomes more expressive during transformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synchrotron X-ray powder diffraction and convergent beam electron diffraction studies on the cubic phase of MgV{sub 2}O{sub 4} spinel

The A V{sub 2}O{sub 4} (A=Mg{sup 2+}, Zn{sup 2+}, Cd{sup 2+}) spinels are three-dimensional spin-1 frustrated systems with orbital degree of freedom, which have been known to possess intriguing orbital states causing releases of spin frustration at low temperatures. We have performed synchrotron X-ray and convergent beam electron diffraction measurements for one of these vanadates, MgV{sub 2}O{sub 4} in order to clarify its crystal structure in the high temperature cubic phase, which is regarded as an important starting point for understanding the details of the low temperature phase. We have successfully observed that the [001] zone axis convergent beam electron diffraction pattern exhibits 4mm symmetry, suggesting the space group of Fd3{sup ¯}m in the cubic MgV{sub 2}O{sub 4}. It has also been demonstrated that the crystal structure of the cubic MgV{sub 2}O{sub 4} contains VO{sub 6} octahedra elongated along the threefold rotation axis. Based on our results, we discuss the orbital states of MgV{sub 2}O{sub 4} as well as the other spinel vanadates. - Graphical abstract: Precise geometry of the VO{sub 6} octahedra in the cubic phase of MgV{sub 2}O{sub 4} spinel determined with the synchrotron powder XRD data. - Highlights: • We examined the crystal structure of the cubic phase of MgV{sub 2}O{sub 4} spinel. • We prepared the single crystal and powdered sample of MgV{sub 2}O{sub 4} with high quality. • The result of the CBED measurement agrees with the space group of Fd3{sup ¯}m in the phase. • The cubic phase has VO{sub 6} octahedra elongated along the threefold rotation axis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation and electrochemical properties of Li-rich spinel-type lithium manganate coated LiMn{sub 2}O{sub 4}

Graphical abstract: Composites in which Li-rich spinel-type lithium manganate was coated on surface of LiMn{sub 2}O{sub 4} particles were prepared, and the cycling stabilities of composites were much improved. Highlights: Black-Right-Pointing-Pointer A composite of Li-rich spinel-type lithium manganate and LiMn{sub 2}O{sub 4}. Black-Right-Pointing-Pointer Li-rich spinel-type lithium manganate coating on the surface of LiMn{sub 2}O{sub 4} particles. Black-Right-Pointing-Pointer A synthetic method of sol-gel followed by heating. Black-Right-Pointing-Pointer Improved cycling stability without large degradation of initial capacity. -- Abstract: Li-rich spinel-type lithium manganate (SC) coated LiMn{sub 2}O{sub 4} composites were prepared and characterized by XRD, SEM, FT-IR, ICP, etc. Their charge/discharge behaviors were studied between 3.0 and 4.3 V at 40 mA g{sup -1} under room temperature, and the results showed that SC coated on surface of LiMn{sub 2}O{sub 4} could improve cycling stability of composite electrodes. The composite (S1) containing 4.8 wt% of SC exhibited noticeably improved cycling stability, whereas the initial specific capacity was very close to that of LiMn{sub 2}O{sub 4}.

36 MATERIALS SCIENCE↗

Preparation and characterization of spinel nickel ferrite obtained by the soft mechanochemically assisted synthesis

Graphical abstract: Display Omitted Highlights: ► NiFe{sub 2}O{sub 4} has been prepared by a soft mechanochemical route from mixture of powders. ► The spinel phase formation was completed after 25 h. ► The synthesized ferrites have a crystallite size of about 25 and 15 nm. ► Based on Raman research is observed five first-order Raman active modes. ► We were able to estimate the degree of inversion at most 0.82 and 0.66. -- Abstract: Nickel ferrite, NiFe{sub 2}O{sub 4} has been prepared by a soft mechanochemical route from mixture of (1) Ni(OH){sub 2} and α-Fe{sub 2}O{sub 3} and (2) Ni(OH){sub 2} and Fe(OH){sub 3} powders in a planetary ball mill for varying duration. Soft mechanochemical reaction leading to formation of the NiFe{sub 2}O{sub 4} spinel phase was followed by X-ray diffraction, Raman and infrared spectroscopy, TGA, scanning and transmission microscopy. The spinel phase formation was first observed after 4 h of milling and its formation was completed after 25 h in the both cases. The synthesized NiFe{sub 2}O{sub 4} ferrite has a nanocrystalline structure with a crystallite size of about 20 and 10 nm respectively for the cases (1) and (2). The final grain size in the system (1) is about twice as large as that in the system (2), what is a consequence of different reaction paths in these two processing routes. There are five Raman and four IR active modes. Mössbauer spectroscopy studies implied on the possible cation distribution between the tetrahedral and octahedral sites in formed NiFe{sub 2}O{sub 4} spinel structure. We were able to estimate the degree of inversion at most 0.82 in the case (1) and 0.66 in the case (2).

36 MATERIALS SCIENCE↗

Nanocrystalline spinel ferrite (MFe{sub 2}O{sub 4}, M = Ni, Co, Mn, Mg, Zn) powders prepared by a simple aloe vera plant-extracted solution hydrothermal route

Graphical abstract: This figure shows the specific magnetization curves of the as-prepared MFe{sub 2}O{sub 4} (M = Ni, Co, Mn, Mg, Zn) powders obtained from room temperature VSM measurement. These curves are typical for a soft magnetic material and indicate hysteresis ferromagnetism in the field ranges of ±500 Oe, ±1000 Oe, and ±2000 Oe for the CoFe{sub 2}O{sub 4}, MgFe{sub 2}O{sub 4} and MnFe{sub 2}O{sub 4} respectively, whereas the samples of NiFe{sub 2}O{sub 4} and ZnFe{sub 2}O{sub 4} show a superparamagnetic behavior. Highlights: ► Nanocrystalline MFe{sub 2}O{sub 4} powders were synthesized by a novel hydrothermal method. ► Metal acetylacetonates and aloe vera plant-extracted solution are used. ► This biosynthetic route is very simple and provides high-yield oxide nanomaterials. ► XRD and TEM results indicate that the prepared samples have only spinel structure. ► The maximum M{sub s} of 68.9 emu/g at 10 kOe were observed for the samples of MnFe{sub 2}O{sub 4}. - Abstract: Nanocrystalline spinel ferrite MFe{sub 2}O{sub 4} (M = Ni, Co, Mn, Mg, Zn) powders were synthesized by a novel hydrothermal method using Fe(acac){sub 3}, M(acac){sub 3} (M = Ni, Co, Mn, Mg, Zn) and aloe vera plant extracted solution. The X-ray diffraction and selected-area electron diffraction results indicate that the synthesized nanocrystalline have only spinel structure without the presence of other phase impurities. The crystal structure and morphology of the spinel ferrite powders, as revealed by TEM, show that the NiFe{sub 2}O{sub 4} and CoFe{sub 2}O{sub 4} samples contain nanoparticles, whereas the MnFe{sub 2}O{sub 4} and MgFe{sub 2}O{sub 4} samples consist of many nanoplatelets and nanoparticles. Interestingly, the ZnFe{sub 2}O{sub 4} sample contains plate-like structure of networked nanocrystalline particles. Room temperature magnetization results show a ferromagnetic behavior of the CoFe{sub 2}O{sub 4}, MnFe{sub 2}O{sub 4} and MgFe{sub 2}O{sub 4} samples, whereas the samples of NiFe{sub 2}O{sub 4} and ZnFe{sub 2}O{sub 4} exhibit a superparamagnetic behavior.

36 MATERIALS SCIENCE↗

A facile gel-combustion route for fine particle synthesis of spinel ferrichromite: X-ray and Mössbauer study on effect of Mg and Ni content

Highlights: • A novel and facile synthesis route. • Transformation of system from random to inverse spinel. • Appearance of superparamagnetism phase. - Abstract: A novel nitrate–citrate gel combustion route was used to prepare fine particle of a series Mg{sub 1−x}Ni{sub x}FeCrO{sub 4} (0.0 ≤ x ≤ 1.0) and its structural properties were investigated. The in situ oxidizing environment provided by the nitrate ions in the gel increases the rate of oxidation and lowers the decomposition temperature of component. All the samples after sintering were characterized at room temperature by X-ray diffraction (XRD) method and Mössbauer spectroscopy techniques. The X-ray and Mössbauer studies confirmed the single phase cubic spinel structure with all Fe ions in 3+ charge state. XRD and Mössbauer studies revealed that the samples of x = 0.0, and 0.2 are random spinel and show rather broad lines, while x = 0.4–1.0 are inverse spinel.

36 MATERIALS SCIENCE↗

Improvement of catalytic activity in selective oxidation of styrene with H{sub 2}O{sub 2} over spinel Mg–Cu ferrite hollow spheres in water

Graphical abstract: Uniform spinel Mg–Cu ferrite hollow spheres were prepared using carbon spheres as templates. Solid spinel Mg{sub 0.5}Cu{sub 0.5}Fe{sub 2}O{sub 4} ferrite nanocrystals were also prepared by sol–gel auto-combustion, hydrothermal and coprecipitation methods for comparison. The samples were found to be efficient catalysts for oxidation of styrene using hydrogen peroxide as oxidant. Especially, in the case of Mg{sub 0.5}Cu{sub 0.5}Fe{sub 2}O{sub 4} hollow spheres, obvious improvement on catalytic activity was observed and 21.2% of styrene conversion and 75.2% of selectivity for benzaldehyde were obtained at 80 °C for 6 h reaction in water. The catalyst can be magnetically separated easily for reuse and no obvious loss of activity was observed when reused in six consecutive runs. - Highlights: • Uniform spinel ferrite hollow spheres were prepared by a simple method. • The catalyst has been proved much more efficient for styrene oxidation than the reported analogues. • The catalyst can be easily separated by external magnetic field and has exhibited excellent reusability. • The catalytic system is environmentally friendly. - Abstract: Uniform spinel Mg–Cu ferrite hollow spheres were prepared using carbon spheres as templates. For comparison, solid Mg–Cu ferrite nanocrystals were also prepared by sol–gel auto-combustion, hydrothermal and coprecipitation methods. All the samples were characterized by Fourier transform infrared spectrophotometry (FT-IR), X-ray diffractometry (XRD), transmission electron microscopy (TEM) and N{sub 2} physisorption. The samples were found to be efficient catalysts for oxidation of styrene using hydrogen peroxide as oxidant. Especially, in the case of Mg{sub 0.5}Cu{sub 0.5}Fe{sub 2}O{sub 4} hollow spheres, obvious improvement on catalytic activity was observed, and 21.2% of styrene conversion and 75.2% of selectivity for benzaldehyde were obtained at 80 °C for 6 h reaction in water. The catalyst can be magnetically separated easily for reuse and no obvious loss of activity was observed when reused in six consecutive runs.

36 MATERIALS SCIENCE↗

Effect of gamma irradiation on the structural and magnetic properties of Co–Zn spinel ferrite nanoparticles

Highlights: • Co–Zn ferrite nanoparticles were examined before and after γ-irradiation. • Single phase cubic spinel structure of Co–Zn was confirmed by XRD data. • The grain size was reported in the range of 52–62 nm after γ-irradiation. • Ms, Hc, n{sub B} were reported to be increased after gamma irradiation. - Abstract: In this work, the structural and magnetic properties of Co{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} (0.0 ≤ x ≤ 1.0) ferrite nanoparticles were studied before and after gamma irradiation. The as-synthesized samples of Co–Zn ferrite nanoparticles prepared by sol–gel auto-combustion technique were analysed by XRD which suggested the single phase; cubic spinel structure of the material. Crystal defects produced in the spinel lattice were studied before and after Co{sup 60} γ-irradiation in a gamma cell with a dose rate of 0.1 Mrad/h in order to report the changes in structural and magnetic properties of the Co–Zn ferrite nanoparticles. The average crystallite size (t), lattice parameter (α) and other structural parameters of gamma-irradiated and un-irradiated Co{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} spinel ferrite system was calculated from XRD data. The morphological characterizations were performed using scanning electron microscopy (SEM). The magnetic properties were measured using pulse field hysteresis loop tracer by applying magnetic field of 1000 Oe, and the analysis of data obtained revealed that the magnetic property such as saturation magnetization (Ms), coecivity (Hc), magneton number (n{sub B}) etc. magnetic parameters were increased after irradiation.

36 MATERIALS SCIENCE↗

Structural and morphological characteristics of CuMe2O4 spinels in reductive atmosphere depending on the chemical nature of Me(III) cations

Highlights: • CuCr{sub 1}Fe{sub 1}O{sub 4}, CuFe{sub 1}Al{sub 1}O{sub 4} and CuCr{sub 1}Al{sub 1}O{sub 4} samples of a spinel structure, prepared by thermal decomposition of common hydroxycarbonates at 650°C have nonuniforn atomic distribution in the spinel nanoparticles. • The extent of copper reduction and structural features of Cu{sup 0} produced upon reduction of CuMe{sub 2}O{sub 4} spinels depend on the chemical nature of Me{sup 3+}. • The nature of Me{sup 3+} makes it possible to control the structural characteristics, particularly in the reduced state. - Abstract: Mixed copper-containing spinel-type compounds CuCr{sub 1}Fe{sub 1}O{sub 4}, CuCr{sub 1}Al{sub 1}O{sub 4} and CuFe{sub 1}Al{sub 1}O{sub 4} were studied by means of XRD and HREM after calcination at 650 °C in the air and treatments in a hydrogen-containing medium at 270–210 °C (H{sub 2}:He = 5:95; H{sub 2}:CO:H{sub 2}O = 50:7:43). The effect of the chemical nature of Me{sup 3+} cation on the structural-morphological characteristics of oxide systems and their transformations in a reducing medium was investigated. It was shown that the nature of Me{sup 3+} cation makes it possible to control the structural characteristics, particularly in the reduced state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of the structural, electronic, elastic and thermodynamic properties of CuAl2X4 (X = O, S) spinel structure

Highlights: • Fundamental properties of CuAl{sub 2}X{sub 4} (X = O, S) aluminate spinels have been investigated. • The pressure dependence of the elastic constants C{sub ij} can be successfully fit by a straight line. • CuAl{sub 2}X{sub 4} (X = O, S) compounds are mechanically stable at ambient conditions. • Temperature and pressure dependences of some macroscopic parameters are achieved. - Abstract: The structural, electronic, elastic and thermodynamic properties of oxo- and thio-spinels have been predicted based on the ultrasoft pseudo-potential scheme as implemented in the CASTEP code. The exchange-correlation potential was treated within the generalized gradient approximation (GGA-PBE). The calculated structural parameters such as lattice constants and internal parameters are in good agreement with the available experimental data. The ground state electronic band structure revealed that CuAl{sub 2}X{sub 4} (XO, S) spinels are direct band gap semiconductors with a transition along Γ-Γ symmetry points. The calculated values of elastic constants satisfy the Born criteria at ambient conditions and confirm that the spinel structures of CuAl{sub 2}O{sub 4} and CuAl{sub 2}S{sub 4} are mechanically stable. The thiospinel structure may have a phase transition under pressure, due to the negative value of C{sub 44}. The influence of temperature and pressure on macroscopic characteristics of CuAl{sub 2}O{sub 4} and CuAl{sub 2}S{sub 4} compounds was estimated using the quasi-harmonic Debye model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Realizing continuous cation order-to-disorder tuning in a class of high-energy spinel-type Li-ion cathodes

Conventional Li-ion cathode materials are dominated by well-ordered structures, in which Li and transition metals occupy distinct crystallographic sites. Here, we show in this paper that profoundly new degrees of freedom for the optimization of electrochemical properties may be accessed if controllable cation disorder is introduced. In a class of high-capacity spinel-type cathode materials, we identify cation to anion ratio in synthesis as a key parameter for tuning the structure continuously from a well-ordered spinel, through a partially ordered spinel, to rocksalt. We find that the varying degree of cation disorder modifies the voltage profile, rate capability, and charge-compensation mechanism in a rational and predictable way. Our results indicate that spinel-type order is most beneficial for achieving high-rate performance as long as the cooperative 8a to 16c phase transition is suppressed, while more rocksalt-like disorder facilitates O redox, which can increase capacity. Our findings reveal an important tuning handle for achieving high energy and power in the vast space of partially ordered cathode materials.

25 ENERGY STORAGE↗

Enhanced long-term cyclability in Li-Rich layered oxides by electrochemically constructing a Li x TM 3-x O 4 -type spinel shell

The poor long-term cycling stability, including the fast capacity fade and the severe voltage decay, has become the main concern hindering the practical application of Li-rich layered oxides, a promising cathode for high- energy-density Li-ion battery. Herein, we design and electrochemically construct a ~10 nm-thick Li x TM 3-x O 4 - type (TM ¼Ni, Co, Mn, 0 3 O 4 -type spinel phase and the good Liþconductivity of LiMn 2 O 4 -type spinel phase. Systemic structural and electrochemical analysis demonstrate that, it slows down the activation rate of Li 2 MnO 3 component and efficiently alleviates the lattice O loss at high voltage (>4.5 V) and Mn dissolution, thereby suppressing the structural degradation from the layered phase to the spinel phase in the bulk, eventually significantly enhancing the long-term cycling stability. This study adds richness into the Mn-based spinel phase system and provides a new heterostructure design strategy to improve the electrochemical performance of Li-rich layered cathodes and beyond.

25 ENERGY STORAGE↗

Tunning the linkage of structure units to enable stable spinel-based cathode in the wide potential window

The low practical capacity (<140 mA h g –1 ) of spinel phase LiMn 2–x Ni x O 4 (0 < x < 1) excludes it from high energy density lithium ion batteries (LIBs) for powering electric vehicles. Extending the operating potential window from 3.0 to 4.8 V to 2.0–4.8 V can double the capacity, but result in fast capacity decay due to the drastic cubic-tetragonal phase transition below 3.0 V, induced by serious Jahn-Teller (J-T) distortion of structure units (Mn 3+ )O 6 octahedra. Herein, we propose a novel strategy to suppress J-T distortion by tuning the linkage of structure units MnO 6 octahedra. The original full-vertex-sharing LiO 4 tetrahedra around MnO 6 octahedra in spinel phase are partially replaced by edge-sharing LiO 6 octahedra, which relate Mn-O bonds along the dz 2 direction with those along the d xy plane, thus significantly mitigating J-T distortion and suppressing the phase transition when discharged to 2.0 V. Following this strategy, the prepared spinel-based cathode achieves a high reversible capacity of about 290 mA h g –1 and an energy density up to 957 W h kg –1 with improved cycling stability. Furthermore, this work finds a new opportunity for the traditional spinel cathode towards applications in high energy density LIBs in a low cost and sustainable manner.

25 ENERGY STORAGE↗

Multivalent Electrochemistry of Spinel Mg x Mn 3– x O 4 Nanocrystals

Oxides undergoing reversible electrochemical cycling of Mg 2+ ions would enable novel battery concepts beyond Li + , capable of storing large amounts of energy. However, materials showing this chemical reactivity are scarce. Suitable candidates require small particles to shorten transport lengths, together with chemically complex structures that promote cation mobility, such as spinel. These goals pose a challenge for materials chemists. Here, nanocrystals of spinel-type Mg 0.5 Mn 2.5 O 4 were prepared using colloidal synthesis, and their electrochemical activity is presented. Cycling in an aqueous Mg 2+ electrolyte led to a reversible transformation between a reduced spinel and an oxidized layered framework. This reaction involves large amounts of capacity because of the full oxidation to Mn 4+ , through the extraction of both Mg 2+ and, in the first cycle, Mn 2+ ions. Re-formation of the spinel upon reduction resulted in enrichment with Mg 2+ , indicating that its insertion is more favorable than that of Mn 2+ . Incorporation of water into the structure was not indispensable for the transformation, as revealed by experiments in non-aqueous electrolytes and infrared spectroscopy. Lastly, the findings open the door for the use of similar nanocrystals in Mg batteries provided that electrolytes with suitable anodic stability are discovered, thereby identifying novel routes toward electrode materials for batteries with high energy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cation Short-Range Ordering of MgAl 2 O 4 and NiAl 2 O 4 Spinel Oxides at High Temperatures via In Situ Neutron Total Scattering

Complex oxides that adopt the isometric spinel structure (AB 2 O 4 ) are important for numerous technological applications and are relevant for certain geological processes, which involve exposure to extreme environments such as high pressures and temperatures. Recent studies have shown that the changes to the spinel structure caused by these environments are complex and depend on the material length scale under consideration. In this study we have expanded this approach to the behavior of spinels under high temperature. In situ neutron total scattering experiments, coupled with pair distribution function analysis, performed on two spinel compositions with various levels of pre-existing disorder (MgAl 2 O 4 and NiAl 2 O 4 ) revealed that both compositions trend to a state of maximum disorder where the A and B cations are randomly distributed amongst the two available sites. Temperature-induced cation inversion, conventionally understood as exchange of cations on the A and B sites, is locally expressed as an atomic rearrangement to a tetragonal symmetry, a correlation that is retained up to the maximum temperature studied (1000 °C). Furthermore, a complex thermal expansion behavior is revealed wherein the oxide materials expand heterogeneously at the level of coordination polyhedral with an apparent dependence on bond strength.

36 MATERIALS SCIENCE↗

Compositionally Complex Spinel Oxides as Conversion Anodes for Lithium-Ion Batteries

Four different compositionally complex multicomponent M 3 O 4 spinels containing 5–8 distinct metals were prepared by a rapid combustion synthesis method or solvothermal synthesis. High resolution synchrotron X-ray diffraction patterns show that the materials consist primarily of spinel phases with small amounts of rock salt impurities, and, in several samples, a minor amount of contracted spinel phase. Materials were investigated as conversion anodes in lithium half-cells and delivered significantly higher capacities than two-component MgFe 2 O 4 made by combustion synthesis. X-ray absorption near-edge structure (XANES) was used to estimate the oxidation states of the metals in the pristine, lithiated (discharged) and delithiated (charged) materials to better understand the redox processes in half cells that led to the improvement. Co, Ni, and Zn are reduced to low oxidation states during lithiation (cell discharge) but are only partially oxidized. The presence of a conductive metallic network that forms after lithiation is thought to account for the improved electrochemical characteristics. Interestingly, in most of the samples, iron is not fully reduced during initial lithiation unlike what happens with a set of related high entropy spinel ferrites studied previously. Finally, the improved electrochemical properties of these materials illustrates both the advantages of complexity and the difficulties in predicting their behavior.

25 ENERGY STORAGE↗