Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solubility”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Accelerating Membrane-based CO 2 Separation by Soluble Nanoporous Polymer Networks Produced by Mechanochemical Oxidative Coupling

Achieving homogeneous dispersion of nanoporous fillers within membrane architectures remains a great challenge for mixed-matrix membrane (MMMs) technology. Imparting solution processability of nanoporous materials would help advance the development of MMMs for membrane-based gas separations. A mechanochemically assisted oxidative coupling polymerization strategy was used to create a new family of soluble nanoporous polymer networks. The solid-state ball-milling method affords inherent molecular weight control over polymer growth and therefore provides unexpected solubility for the resulting nanoporous frameworks. MMM-based CO 2 /CH 4 separation performance was significantly accelerated by these new soluble fillers. In conclusion, we anticipate this facile method will facilitate new possibilities for the rational design and synthesis of soluble nanoporous polymer networks and promote their applications in membrane-based gas separations.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Computational Approach for Rapidly Predicting Temperature–Dependent Polymer Solubilities Using Molecular–Scale Models

One promising approach to recycle multicomponent plastic waste (e. g., multilayer plastic films) is selective dissolution. Selective dissolution is a solvent-mediated process in which differences in polymer solubility in a carefully chosen solvent system are exploited to recover a target polymer. Here, a computational approach was developed that rapidly predicts temperature-dependent polymer solubilities to guide the design of solvent systems for solvent-mediated polymer recycling. Polymer conformations were obtained from molecular dynamics simulations by modeling the polymer as a short oligomer and then used as input to the conductor-like screening model for real solvents (COSMO-RS) for solubility predictions. Using polyethylene (PE) and ethylene vinyl alcohol (EVOH) as representative polymers, the effect of simulation parameters was systematically studied, and predicted solubilities were found to be in good agreement with experimental measurements. Furthermore, the applicability of the approach was demonstrated by identifying selective solvents for PE and EVOH dissolution from a library of 524 solvents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

A Solubility Comparison of Cyclotetramethylenetetranitramine (HMX) and Potential Mock-HMX Candidates in Solvents Relevant to Slurry Formulating Polymer-Bonded Materials

Understanding solubility behavior of organic crystalline materials is critical in the development of slurry-formulated plastic bonded composites. In the field of high explosives (HE), a common method for obtaining high density, greater than 95 % theoretical maximum density, is to encapsulate HE in a polymer matrix resulting in the formation of plastic bonded explosive (PBX) prills. Prill formation is highly nuanced and requires understanding of particle size distributions, solvent, antisolvent, and binder system as well as interactions thereof. In this paper, in an effort to create mock-HE that mimics HE in density and mechanical strength, solubility of candidate molecules was compared to cyclotetramethylenetetranitramine (HMX) in binder solvents relevant to prill formation. The results indicate that the mock candidates chosen for this study have different solubilities compared to HMX in water and both organic solvents, 2-butanone and ethyl acetate, investigated. With these solubility differences known, prills to match PBXs based on HMX can be formulated, pressed and tested.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

A thermodynamic model to predict the aqueous solubility of hydrocarbon mixtures at two-phase hydrate-liquid water equilibrium

In order to understand the fate and transport of hydrocarbons and hydrocarbon mixtures in the deep sea and underlying sediments it requires an accurate determination of the two-phase hydrate (H)-liquid water (L w ) thermodynamic equilibrium in the absence of a free gas phase. In addition to controlling hydrate formation directly from the aqueous phase, the H-L w equilibrium provides the aqueous solubility of dissolving hydrate. The aqueous solubility of hydrocarbon mixture at H-L w equilibrium was calculated based on the van der Waals and Platteeuw statistical thermodynamic model and the Holder model. Langmuir constants were calculated from cell potential parameters obtained from ab initio intermolecular potentials and thus the model contains no fitting parameters. The model accurately predicts pure methane, ethane, and propane experimental H-L w equilibrium solubility data, including new data provided here for methane. Here, we present hydrocarbon solubilities in water and seawater at H-L w equilibrium at deep sea conditions for both methane and a thermogenic mixture based on the methane–ethane–propane ratio from the 2010 Macondo oil spill. We also present model predictions of the proportion of occupied large and small cages at H-L w equilibrium for both systems, as well as hydrocarbon ratios in the hydrate phase for the thermogenic mixture.

58 GEOSCIENCES↗
DOE OSTI2024

The solubility of La hydroxide and stability of La 3+ and La hydroxyl complexes at acidic to mildly acidic pH from 25 to 250 °C

The mobility of rare earth elements (REE) in natural hydrothermal systems can be assessed using geochemical modeling, which requires reliable thermodynamic data of relevant aqueous species. In this study, we evaluate the controls of pH and temperature on La speciation and the role of hydroxyl complexes in REE transport at hydrothermal conditions. Batch-type hydrothermal solubility experiments were conducted using synthetic La hydroxide powders equilibrated in perchloric acid-based aqueous solutions at temperatures between 150 and 250 °C and starting pH of 2 to 5. The La hydroxide solubility is retrograde with temperature and displays a strong pH dependence with a decrease in La concentrations from acidic to mildly acidic pH spanning between 3 and 5 orders of magnitude (e.g. log La molality of –2.5 to –7.2 at 250 °C). Thermodynamic optimizations using GEMSFITS allow to retrieve the standard partial molal Gibbs energies for the La 3+ aqua ion and the formation constants for the La hydroxyl species (i.e., LaOH 2+ , La(OH) 2 + , La(OH) 3 0 ) between 25 and 250 °C. A comparison between the experimentally derived thermodynamic properties with the calculated values from the Helgeson-Kirkham-Flowers equation of state parameters indicates an increased divergence with temperature. Discrepancies in standard partial molal Gibbs energies range between ~ 1 – 12 kJ/mol and result in a predicted La hydroxide solubility differing by up to 3 orders of magnitude at 250 °C. Speciation calculations indicate a higher stability of La 3+ and LaOH 2+ over the other La hydroxyl species in the studied pH range of 3.4 to 6. Here, the optimized thermodynamic properties for La aqueous species have important implications for modeling the solubility of REE minerals such as monazite and the mobility of REE in hydrothermal systems.

58 GEOSCIENCES↗
DOE OSTI2011

Solubility and microstructure in the pseudo-binary PbTe-Ag{sub 2}Te system

The solvus lines of the PbTe and Ag{sub 2}Te phases in the pseudo-binary PbTe-Ag{sub 2}Te system have been determined using diffusion couples and unidirectional solidification by the Bridgman method. The solubilities of both Ag{sub 2}Te in PbTe and PbTe in Ag{sub 2}Te decrease with decrease in temperature. For the former, this change is from 14.9 at% Ag (694 deg. C) to 0.5 at% Ag (375 deg. C), while for the latter it is from 12.4 at% Pb (650 deg. C) to 3.1 at% Pb (375 deg. C). The decrease in solubilities leads to the formation of precipitates of Ag{sub 2}Te in PbTe and PbTe in Ag{sub 2}Te. In particular, fast atomic diffusion in Ag{sub 2}Te results in the precipitation of PbTe even in quenched samples. From the temperature dependence of these solubilities, heats of solution have been determined. In the diffusion couple, the phase boundary moves toward PbTe. In the region between the phase boundary and the initial interface, PbTe transforms to {beta}-Ag{sub 2}Te (cubic) retaining the cube-on-cube orientation relationship. - Graphical abstract: The precipitation in the diffusion couple in fast cooling suggests high chemical diffusivity. The large heat of solution for the Ag{sub 2} Te dissolution in PbTe leads to fine microstructure. Highlights: > The solvus lines were determined by diffusion couples and unidirectional solidification. > The solubilities in both phases decrease with decrease in temperature. > Chemical diffusivity in Ag2Te phase is high. > Heat of solution is one of the key parameters to control the number density of precipitates. > The Ag2Te phase transformed from PbTe in diffusion couples holds the cube-on-cube relationship.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2012

Refuse derived soluble bio-organics enhancing tomato plant growth and productivity

Highlights: Black-Right-Pointing-Pointer Municipal bio-wastes are a sustainable source of bio-based products. Black-Right-Pointing-Pointer Refuse derived soluble bio-organics promote chlorophyll synthesis. Black-Right-Pointing-Pointer Refuse derived soluble bio-organics enhance plant growth and fruit ripening rate. Black-Right-Pointing-Pointer Sustainable chemistry exploiting urban refuse allows sustainable development. Black-Right-Pointing-Pointer Chemistry, agriculture and the environment benefit from biowaste technology. - Abstract: Municipal bio-refuse (CVD), containing kitchen wastes, home gardening residues and public park trimmings, was treated with alkali to yield a soluble bio-organic fraction (SBO) and an insoluble residue. These materials were characterized using elemental analysis, potentiometric titration, and 13C NMR spectroscopy, and then applied as organic fertilizers to soil for tomato greenhouse cultivation. Their performance was compared with a commercial product obtained from animal residues. Plant growth, fruit yield and quality, and soil and leaf chemical composition were the selected performance indicators. The SBO exhibited the best performance by enhancing leaf chlorophyll content, improving plant growth and fruit ripening rate and yield. No product performance-chemical composition relationship could be assessed. Solubility could be one reason for the superior performance of SBO as a tomato growth promoter. The enhancement of leaf chlorophyll content is discussed to identify a possible link with the SBO photosensitizing properties that have been demonstrated in other work, and thus with photosynthetic performance.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Relationship between Atmospheric Aerosol Mineral Surface Area and Iron Solubility

Size-fractionated dust aerosols (>7.2, 7.2-3, 3-1.5, 1.5-0.95, 0.95-0.49, and <0.49 mu m) originating from source regions, including the Sahara, North America, and the local marine environment, were collected shipboard in the Atlantic Ocean. Iron mineralogy, oxidation state, and solubility were examined using wet chemistry and synchrotron-based iron K-edge X-ray absorption near edge structure (XANES) spectroscopy. The soluble iron concentration showed a strong positive correlation with calculated aerosol an surface area (R 2 = 0.81). The iron XANES spectra, for all size ranges, were nearly identical for Saharan samples. Spectra from North American and local atmosphere (marine) provenances exhibited more variation between size fractions, with no obvious trends with the particle size. Saharan spectra were distinct from North American spectra, which confirms the different compositions of the two sources. Marine spectra displayed a range of both North American and Saharan spectral characteristics, likely reflecting that the marine samples are ultimately derived from these and potentially other sources. However, despite the notable variation in compositions, the surface area is the predominant factor affecting total iron solubility. Aerosol iron solubilization through acidic surface reactions would be most effective in samples with the highest surface area, which likely results in the strong positive correlation with soluble iron concentration in distilled water.

58 GEOSCIENCES↗
DOE OSTI2023

Large-scale computational polymer solubility predictions and applications to dissolution-based plastic recycling

Dissolution-based plastic recycling is a promising approach to separate and recover high quality pure polymer resins from multicomponent plastic waste by exploiting differences in polymer solubility. The design of a dissolution-based polymer recycling process requires the selection of appropriate solvent systems and operating temperatures to dissolve only target polymers. Determining these parameters experimentally is challenging due to the wide range of solvents and temperatures possible for a given set of target polymers. In this work, we report a computational scheme that employs molecular dynamics simulations and the Conductor-like Screening Model for Realistic Solvents to predict polymer solubilities. Using this scheme, we established a computational solubility database for 8 common polymers and 1007 solvents at multiple temperatures and measured selected solubilities experimentally to validate computational predictions. Analysis of functional groups within this large database then provides chemical heuristics relating the molecular structures of good and non-solvents for selected polymers. We further developed a tool that automates the selection of solvents for all possible sequences in which target polymers can be selectively dissolved to guide the design of dissolution-based plastic recycling processes. Here, we demonstrate the application of these methods via multiple experimental case studies of representative dissolution-based polymer recycling processes in which pure polymer resins were successfully recovered from physical mixtures of polymers.

42 ENGINEERING↗
DOE OSTI2014

The solvation radius of silicate melts based on the solubility of noble gases and scaled particle theory

The existing solubility data on noble gases in high-temperature silicate melts have been analyzed in terms of Scaling Particle Theory coupled with an ab initio assessment of the electronic, dispersive, and repulsive energy terms based on the Polarized Continuum Model (PCM). After a preliminary analysis of the role of the contracted Gaussian basis sets and theory level in reproducing appropriate static dipole polarizabilities in a vacuum, we have shown that the procedure returns Henry's law constants consistent with the values experimentally observed in water and benzene at T = 25 °C and P = 1 bar for the first four elements of the series. The static dielectric constant (ε) of the investigated silicate melts and its optical counterpart (ε{sup ∞}) were then resolved through the application of a modified form of the Clausius-Mossotti relation. Argon has been adopted as a probe to depict its high-T solubility in melts through an appropriate choice of the solvent diameter σ{sub s}, along the guidelines already used in the past for simple media such as water or benzene. The σ{sub s} obtained was consistent with a simple functional form based on the molecular volume of the solvent. The solubility calculations were then extended to He, Ne, and Kr, whose dispersive and repulsive coefficients are available from theory and we have shown that their ab initio Henry's constants at high T reproduce the observed increase with the static polarizability of the series element with reasonable accuracy. At room temperature (T = 25 °C) the calculated Henry's constants of He, Ne, Ar, and Kr in the various silicate media predict higher solubilities than simple extrapolations (i.e., Arrhenius plots) based on high-T experiments and give rise to smooth trends not appreciably affected by the static polarizabilities of the solutes. The present investigation opens new perspectives on a wider application of PCM theory which can be extended to materials of great industrial interest at the core of metallurgical processes, ceramurgy, and the glass industry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Molecular dynamics study of salt–solution interface: Solubility and surface charge of salt in water

The NaCl salt–solution interface often serves as an example of an uncharged surface. However, recent laser-Doppler electrophoresis has shown some evidence that the NaCl crystal is positively charged in its saturated solution. Using molecular dynamics (MD) simulations, we have investigated the NaCl salt–solution interface system, and calculated the solubility of the salt using the direct method and free energy calculations, which are kinetic and thermodynamic approaches, respectively. The direct method calculation uses a salt–solution combined system. When the system is equilibrated, the concentration in the solution area is the solubility. In the free energy calculation, we separately calculate the chemical potential of NaCl in two systems, the solid and the solution, using thermodynamic integration with MD simulations. When the chemical potential of NaCl in the solution phase is equal to the chemical potential of the solid phase, the concentration of the solution system is the solubility. The advantage of using two different methods is that the computational methods can be mutually verified. We found that a relatively good estimate of the solubility of the system can be obtained through comparison of the two methods. Furthermore, we found using microsecond time-scale MD simulations that the positively charged NaCl surface was induced by a combination of a sodium-rich surface and the orientation of the interfacial water molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2012

Determination of the solubility of tin indium oxide using in situ and ex x-ray diffraction

A novel approach to determine the thermodynamic solubility of tin in indium oxide via the exsolution from tin overdoped nano-ITO powders is presented. High-energy, in situ and ex situ synchrotron X-ray diffraction was utilized to study the solubility limit at temperatures ranging from 900 C to 1375 C. The tin exsolution from overdoped nanopowders and the formation of In{sub 4}Sn{sub 3}O{sub 12} were observed in situ during the first 4-48 h of high-temperature treatment. Samples annealed between 900 C and 1175 C were also studied ex situ with heat treatments for up to 2060 h. Structural results obtained from Rietveld analysis include compositional phase analysis, atomic positions, and lattice parameters. The tin solubility in In{sub 2}O{sub 3} was determined using the phase analysis compositions from X-ray diffraction and the elemental compositions obtained from X-ray fluorescence. Experimental complications that can lead to incorrect tin solubility values in the literature are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Solubility and volume swell of fuel system elastomers with ketone blends of E10 gasoline and blendstock for oxygenate blending (BOB)

The compatibility of key infrastructure elastomers with five ketone molecules was assessed via solubility studies and volume swell measurements. The elastomer materials included two fluorocarbons, six acrylonitrile butadiene rubbers (NBRs), and one each of fluorosilicone, neoprene, polyurethane, styrene butadiene rubber (SBR), and silicone. The ketone molecules included acetone, 2-butanone, 2-pentanone, 2-nonanone, and cyclopentanone. The ketones were added to gasoline containing 10% ethanol (E10) and a blendstock for oxygenate blending (BOB) in levels ranging from 0% to 30% by volume. The elastomers were exposed for 4 weeks in each test fluid. The solubility was modeled using Hansen solubility parameters and the volume change was determined for each material and test fuel. In general, the volume swell increased with ketone content and corresponded well to the predicted solubilities. In most cases, the highest level of swelling occurred with added cyclopentanone and acetone, while 2-nonanone produced the lowest levels of volume expansion. The chain length of the straight ketones was found to affect the volume swell behavior as volume expansion decreased with increasing chain length. This behavior is attributed to the reduction in polarity and hydrogen bonding with chain length. Neoprene, SBR, and silicone exhibited poor compatibility with the ketone molecules at all blend levels. Fluorocarbon and fluorosilicone also showed poor compatibility but may be suitable for use as static seals in very low blend levels with 2-nonanone. The results were more mixed for polyurethane and the NBRs. In general, better compatibility (low volume swell) was observed for mixtures containing BOB than for E10. This is due to the lower polarity and hydrogen bonding of the BOB.

10 SYNTHETIC FUELS↗
DOE OSTI2019

Increased Soluble CrkL in Serum of Breast Cancer Patients Is Associated with Advanced Disease

Over-expression of Crk-like protein (CrkL), an intracellular adaptor protein, in breast cancer biopsies has been linked to poor prognosis. CrkL can be secreted from cancer cells binding to β1 integrin on the cell membrane. In this study, we evaluated, for the first time, the levels of soluble CrkL in serum of breast cancer patients. Expression of CrkL and secreted fractions from human breast cancer cell lines and clinical patient samples were assessed by immunohistochemistry and Enzyme Linked Immuno-Sorbent Assay (ELISA). CrkL levels in tissues and sera of patients with different disease stages were compared and statistically analyzed by Chi-square test and Student’s t-test. Culture media from human breast cancer cell lines SUM159, MDA-MB231, and MCF7 showed over a 21-, 15-, and 11-fold higher concentration of soluble CrkL as compared to normal breast epithelium cell line MCF10A. Expression of CrkL was elevated in 85% of breast tumor tissue sections. Serum levels of CrkL were significantly higher in breast cancer patients than in healthy donors. All patients with metastatic disease had significantly elevated concentration of soluble CrkL in the serum with on average three-fold increase from the baseline. The data suggest that soluble fraction of CrkL can be further evaluated as a serum biomarker for advanced disease in breast cancer patients.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1999

Protein solubility modeling

A thermodynamic framework (UNIQUAC model with temperature dependent parameters) is applied to model the salt-induced protein crystallization equilibrium, i.e., protein solubility. The framework introduces a term for the solubility product describing protein transfer between the liquid and solid phase and a term for the solution behavior describing deviation from ideal solution. Protein solubility is modeled as a function of salt concentration and temperature for a four-component system consisting of a protein, pseudo solvent (water and buffer), cation, and anion (salt). Two different systems, lysozyme with sodium chloride and concanavalin A with ammonium sulfate, are investigated. Comparison of the modeled and experimental protein solubility data results in an average root mean square deviation of 5.8%, demonstrating that the model closely follows the experimental behavior. Model calculations and model parameters are reviewed to examine the model and protein crystallization process. Copyright 1999 John Wiley & Sons, Inc.

Proteins/chemistry↗
NASA NTRS2022

VESIcal: A Critical Approach to Volatile Solubility Modelling Using the Open-Source Engine Vesical

Accurate models of H(2)O and CO(2) solubility in silicate melts are vital for understanding volcanic plumbing systems. These models are used to estimate the depths of magma storage regions from melt inclusion volatile contents, investigate the role of volatile exsolution as a driver of volcanic eruptions, and track the degassing path followed by a magma ascending to the surface. However, despite the large increase in the number of experimental constraints over the last two decades, many recent studies still utilize an earlier generation of models which were calibrated on experimental datasets with restricted compositional ranges. This may be because many of the available tools for more recent models require large numbers of input parameters to be hand-typed (e.g., temperature, concentrations of H(2)O, CO(2), and 8–14 oxides), making them difficult to implement on large datasets. Here, we use a new open-source Python3 tool, VESIcal, to critically evaluate the behaviors and sensitivities of different solubility models for a range of melt compositions. Using literature datasets of andesitic-dacitic experimental products and melt inclusions as case studies, we illustrate the importance of evaluating the calibration dataset of each model. Finally, we highlight the limitations of particular data presentation methods, such as isobar diagrams, and provide suggestions for alternatives, and best practices regarding the presentation and archiving of data. This review will aid the selection of the most applicable solubility model for different melt compositions, and identifies areas where additional experimental constraints on volatile solubility are required.

magma↗
NASA NTRS2023

How Does the Use of Different Soil Mineralogical Atlases Impact Soluble Iron Deposition Estimates?

Atmospheric deposition is the primary input of soluble iron (Fe) in remote regions of the open ocean. Fe constitutes a fundamental micro-nutrient for marine biota, affecting biogeochemical cycles and ultimately carbon uptake. Fe is emitted to the atmosphere primarily from dust sources. Fe solubility at emission is origin-dependent, being mostly insoluble when associated with dust minerals. Earth System Models (ESMs) commonly assume that dust aerosols have a globally uniform composition, neglecting known regional variations in soil mineralogy. This work assesses the implications of soil composition uncertainties on the bio-available Fe delivery to the ocean by using a state-of-the-art ESM with a detailed atmospheric Fe cycle (EC-Earth3-Iron). We run two 1-year simulations considering two different Soil Mineralogy Atlases (SMAs). Our results reveal a non-negligible impact of soil mineralogy uncertainties on soluble Fe estimates. By only changing the source of information for the soil composition and updating the Fe content in minerals, we find differences of 31.5% in mineral Fe emissions and 26.7% in soluble Fe deposition budgets.

soluble iron↗
DOE OSTI2018

Soluble Graphene Nanosheets from Recycled Graphite of Spent Lithium Ion Batteries

Soluble graphene nanosheets are fabricated from recycled graphite of spent lithium ion batteries through a modified Hammers process followed by deoxygenation with NaOH–KOH eutectic. Ultrasonic exfoliation in N-methyl-pyrrolidone indicates the loosened graphene layers in recycled graphite are prone to exfoliation. Reduction of the exfoliated graphene oxide sheets was conducted in molten NaOH–KOH eutectic at different temperatures. The results show that molten NaOH–KOH effectively eliminates the unsaturated oxygen-containing moieties from the exfoliated graphene oxide sheets while creating more hydroxyl functional groups. Higher temperature treatment is more prone to remove hydroxyls while producing the shrinkage on the surface of graphene sheets. Graphene sheet with a good solubility is produced when the graphene oxide is heat-treated at 220 °C for 10 h. After reduction, the graphene oxide sheets exhibit excellent dispersibility or solubility in water, ethanol and other polar solvents, therefore being highly desirable for solution processing of graphene materials. Such study not only identifies a high-quality stockpile to prepare soluble graphene but also paves a feasible alternative of graphite recycling from spent lithium batteries.

36 MATERIALS SCIENCE↗