Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Short wavelength”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Effect of gravity on coupled convective and interfacial instabilities during directional solidification

Instabilities occurring during the directional constant-rate solidification of a dilute solution of tin in lead are investigated as a function of gravity with particular emphasis on small constant gravitational accelerations. Two types of instabilities have been identified: (1) convective type that corresponds to long wavelengths, and (2) morphological type that corresponds to short wavelengths. These instabilities are coupled but while the convective instabilities depend strongly on gravity, the morphological instabilities are practically independent of gravity. For low velocities, the convective instabilities occur at much lower solute concentrations than the morphological instabilities, whereas at high velocities the reverse is true.

Coriell, S. R.↗
NASA NTRS2011

High-Operating-Temperature Barrier Infrared Detector with Tailorable Cutoff Wavelength

A mid-wavelength infrared (MWIR) barrier photodetector is capable of operating at higher temperature than the prevailing MWIR detectors based on InSb. The standard high-operating-temperature barrier infrared detector (HOT-BIRD) is made with an InAsSb infrared absorber that is lattice-matched to a GaSb substrate, and has a cutoff wavelength of approximately 4 microns. To increase the versatility and utility of the HOT-BIRD, it is implemented with IR absorber materials with customizable cutoff wavelengths. The HOT-BIRD can be built with the quaternary alloy GaInAsSb as the absorber, GaAlSbAs as the barrier, on a lattice-matching GaSb substrate. The cutoff wavelength of the GaInAsSb can be tailored by adjusting the alloy composition. To build a HOT-BIRD requires a matching pair of absorber and barrier materials with the following properties: (1) their valence band edges must be approximately the same to allow unimpeded hole flow, while their conduction band edges should have a large difference to form an electron barrier; and (2) the absorber and the barrier must be respectively lattice-matched and closely lattice-matched to the substrate to ensure high material quality and low defect density. To make a HOT-BIRD with cutoff wavelength shorter than 4 microns, a GaInAsSb quaternary alloy was used as the absorber, and a matching GaAlSbAs quaternary alloy as the barrier. By changing the alloy composition, the band gap of the quaternary alloy absorber can be continuously adjusted with cutoff wavelength ranging from 4 microns down to the short wavelength infrared (SWIR). By carefully choosing the alloy composition of the barrier, a HOT-BIRD structure can be formed. With this method, a HOT-BIRD can be made with continuously tailorable cutoff wavelengths from 4 microns down to the SWIR. The HOT-BIRD detector technology is suitable for making very-large-format MWIR/SWIR focal plane arrays that can be operated by passive cooling from low Earth orbit. High-operating temperature infrared with reduced cooling requirement would benefit space missions in reduction of size, weight, and power, and an increase in mission lifetime.

Ting, David Z.↗
NASA NTRS1973

New techniques for far-infrared filters.

The techniques considered make it possible to construct high performance low-pass wide-band, and medium-band filters at wavelengths in the range from 25 to 300 micrometers. Short wavelength rejection without appreciable loss at long wavelengths is achieved by means of small particle scattering. Spectral definition in the far infrared is obtained by cooling one or more crystalline materials to liquid-He or liquid-nitrogen temperatures. The problem of reflection losses at the various surfaces is solved by a new antireflection coating technique.

Armstrong, K. R.↗
NASA NTRS1982

The chromospheres of classical Cepheids. I - Low resolution IUE spectra

A program to study the behavior of chromospheres in classical Cepheids using both ground-based and satellite-based observations. Five stars, delta Cep, nu Aql, beta Dor, zeta Gem, and l Car, have been included, and where possible the various types of data have been obtained simultaneously. The first part of this investigation concerns low dispersion spectra from the IUE satellite. Fine error sensor (FES) magnitudes are presented for the five Cepheids and, in the case of one, nu Aql, are used to rediscuss the period. The 'artificial viscosity dip' predicted by some theoretical calculations may be present in the FES light curve of delta Cep. The low dispersion spectra have been used to determine continuum magnitudes at various UV wavelengths, and light curves are shown. The amplitude increases with decreasing wavelength except around 1550 A. Line emission in the short wavelength region is observed in three of the Cepheids and is found to be phase dependent. Some correspondence is found between the variation of the emission lines and the appearance of bumps on the UV light curves.

Schmidt, E. G.↗
NASA NTRS1987

The generation of Tollmien-Schlichting waves by long wavelength free stream disturbances

The paper is primarily concerned with explaining how very long wavelength free stream disturbances are able to generate very short wavelength Tollmien-Schlichting waves in laminar boundary layers. Consideration is given to the case where the disturbances are of small amplitude and have harmonic time dependence and where the Mach number is effectively zero. It is shown that the free stream wavelength reduction occurs as a result of nonparallel flow effects which can arise from: (1) the slow viscous growth of the boundary layer, and (2) small but abrupt changes in surface geometry that produce only very weak static pressure variations. Analyses of these two mechanisms are carried out by linearizing the unsteady motion about an appropriate steady flow and asymptotically expanding the result in inverse powers of an appropriate Reynolds number. The analyses are compared with each other and with available experimental data, and they are used to explain the physics of the two mechanisms.

Goldstein, M. E.↗
NASA NTRS1991

High-resolution, VUV (147-201 nm) photoabsorption cross sections for C2H2 at 195 and 295 K

Results of measurements of photoabsorption cross sections of acetylene at 195 and 295 K in the wavelength range of 147-201 nm are reported. Short-wavelength data are obtained at 0.002 nm intervals, but no structure was observed on that scale. Emission and absorption lines from contaminant species in xenon and hydrogen discharges are used to determine the correct wavelength scale for the data. The uncertainty in the relative wavelengths is estimated to be about 0.004 nm, whereas the absolute wavelength values are accurate to + or - 0.043 nm. No significant photodestruction of C2H2 was found during the measurements. Cross-section values determined at the beginning portions of the measurements are indistinguishable from the values determined at the ends, thus demonstrating that there was no loss of absorbers.

Smith, Peter L.↗
NASA NTRS2007

Millimeter Wave Holographical Inspection of Honeycomb Composites

Multi-layered composite structures manufactured with honeycomb, foam or balsa wood cores are finding increasing utility in a variety of aerospace, transportation, and infrastructure applications. Due to the low conductivity and inhomogeneity associated with these composites standard nondestructive testing (NDT) methods are not always capable of inspecting their interior for various defects caused during the manufacturing process or as a result of in-service loading. On the contrary, microwave and millimeter wave NDT methods are well-suited for inspecting these structures since signals at these frequencies readily penetrate through these structures and reflect from different interior boundaries revealing the presence of a wide range of defects such as disbond, delamination, moisture and oil intrusion, impact damage, etc. Millimeter wave frequency spectrum spans 30 GHz - 300 GHz with corresponding wavelengths of 10 - 1 mm. Due to the inherent short wavelengths at these frequencies, one can produce high spatial resolution images of these composites either using real-antenna focused or synthetic-aperture focused methods. In addition, incorporation of swept-frequency in the latter method (i.e., holography) results in high-resolution three-dimensional images. This paper presents the basic steps behind producing such images at millimeter wave frequencies and the results of two honeycomb composite panels are demonstrated at Q-band (33-50 GHz). In addition, these results are compared to previous results using X-ray computed tomography.

Case, J. T.↗
DOE OSTI2020

Super-CMB fluctuations and the Hubble tension

We study the covariance in the angular power spectrum estimates of CMB fluctuations when the primordial fluctuations are non-Gaussian. The non-Gaussian covariance comes from a nonzero connected four-point correlation function -- or the trispectrum in Fourier space -- and can be large when long-wavelength (super-CMB) modes are strongly coupled to short-wavelength modes. The effect of such non-Gaussian covariance can be modeled through additional freedom in the theoretical CMB angular power spectrum and can lead to different inferred values of the standard cosmological parameters relative to those in ΛCDM. Taking the collapsed limit of the primordial trispectrum in the quasi-single field inflation model as an example, we study how the six standard ΛCDM parameters shift when two additional parameters describing the trispectrum are allowed. The reduced statistical significance of the Hubble tension in the extended model allows us to combine the {\it Planck} temperature data and the type Ia supernovae data from Panstarrs with the distance-ladder measurement of the Hubble constant. Here, this combination of data shows strong evidence for a primordial trispectrum-induced non-Gaussian covariance, with a likelihood improvement of Δχ 2 ≈ –15 (with two additional parameters) relative to ΛCDM.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Modulating surface acoustic wave generation through superconductivity

Surface acoustic waves (SAWs), with their five orders-of-magnitude slower propagation velocity, allow for considerably shorter wavelengths at the same frequency compared to electromagnetic waves. The short wavelengths allow for device miniaturization and on-chip integration. The generic design of these devices involves piezoelectric substrates with comb-like arrays of Al or Au electrodes known as interdigitated transducers (IDTs) deposited on the surface. However, Al and Au both have shortcomings at the cryogenic temperatures required for quantum applications, namely, the formation of two-level systems and the lack of superconductivity perpetuating Ohmic losses, respectively. In this work, SAWs are generated in the high-MHz to low-GHz range using niobium nitride (NbN) interdigitated transducers and Bragg reflectors. We demonstrate the fabrication of acoustic devices through photolithography and reactive ion etching. The sharp transition between superconducting and normal states and the corresponding change in SAW transmission allows for fine control of the “on” (superconducting) and “off” (normal) states of NbN, with a ΔT = 1 K separating the transmission minimum and maximum. We demonstrate a 16× difference in transmission between the “on” and “off” states of the device. The SAW transmission behavior mirrors the change in resistance of NbN at its T c . These findings open up new possibilities for the integration of NbN SAW resonators into existing quantum architectures based on NbN and a method for adjusting transmission properties independent of applied voltage.

36 MATERIALS SCIENCE↗
NASA NTRS1980

Geoid anomalies in the vicinity of subduction zones

The regional geoid of the southwest Pacific is matched reasonably well by results from a model of the upper mantle density structure (including slabs) associated with subduction zones of the region. Estimates of the geoid are obtained from Geos-3 and Seasat radar altimeter data. These data are very well suited to the task of detecting intermediate wavelength (600-4000 km) geopotential variations. Actually, subducting slabs can be expected to produce primarily intermediate and longer wavelength variations. Gravimetric profiles across trench/island arc complexes resolve primarily short wavelengths. The model represents subducting slabs as thin surfaces of anomalous mass per unit area. These surfaces are positioned using published seismicity results which detail the configuration of the Benioff zones. Crustal effects are ignored. Effects due to the contrast between the young thermal lithosphere of the behind-arc regions (marginal basins) and the older lithosphere seaward of the trench are modelled. Results indicate that the New Hebrides slab possesses an average areal density anomaly of about 300,000 gm/sq cm. This is about three times that which is estimated for the Tonga-Kermadec slab. Additional modelling suggests that slabs worldwide may be an important source of large, long wavelength gravity highs; i.e., they may contribute substantially to geopotential power of harmonic degree as low as three or four up to twenty or more.

Mcadoo, D. C.↗
NASA NTRS1990

The effects of transverse shearing and anisotropy on vibration frequencies of laminated cylinders

The natural vibration frequencies of orthotropic and anisotropic, simply supported right circular cylinders are predicted using a theory which takes into account higher-order transverse shear deformation effects. A comparison between results based on first-order transverse shear deformation theory and the higher-order theory indicates that an additional allowance for transverse shear deformation has a negligible effect on the predicted natural vibration frequencies associated with long wavelengths, but significantly reduces the natural vibration frequencies associated with short wavelengths. Results of a parametric study of ply orientation for two classes of laminates indicates that while stacking sequence affects natural vibration frequencies, cylinder geometry and mode shape are more important in accurately predicting transverse shear deformation effects. Transverse shearing effects are less important in predicting natural vibration frequencies associated with long wavelength than in predicting axial compressive buckling loads.

Jegley, D. C.↗
DOE OSTI2024

Graviton-photon oscillations in an expanding universe

Through the Gertsenshtein effect, the presence of a large external B-field may allow photons and gravitons to mix in a way that resembles neutrino oscillations and is even more similar to axion-photon mixing. Assuming a background B-field (or any field that behaves like one), we examine the Gertsenshtein mechanism in the context of FLRW expanding universe models, as well as de Sitter space. The conformal invariance of Maxwell’s equations and the conformal noninvariance of the Einstein equations preclude the operation of the Gertsenshtein effect at all scales. In general we find for the matter- and radiation-dominated cases, graviton-oscillations are possible only at late conformal times or when the wavelengths are much shorter than the horizon (kn $\gg$ 1), but that the time-dependent oscillations eventually damp out in any case. Further, the presence of charged particles additionally damps out the oscillations. For the de Sitter universe, we find that oscillations are possible only at early conformal times (n $\ll$ H -1 ) and for wavelengths short compared to the Hubble radius, but eventually freeze in when wavelengths become longer than the Hubble radius. In principle a Gertsenshtein-like mechanism might influence the balance of particle species in an inflationary phase before freezing in; however, we find that in all our models the mixing length is larger than the Hubble radius. We discuss several possible remedies to this situation.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Effects of Residual DMSO Adduct on Photonically Cured MAPbI 3 Solar Cells

Defects and impurities in halide perovskite solar cells can negatively impact device performance and long-term stability. In this study, we identify photonically cured methylammonium (MA) lead iodide films contain a residual adduct, MA 2 Pb 3 I 8 (dimethyl sulfoxide) 2 (MA 2 Pb 3 I 8 (DMSO) 2 ), that reduces photocurrent generation in perovskite solar cells (PSCs). This is evidenced by a decrease in the external quantum efficiency (EQE) near 400 nm. Similar EQE reductions were observed in PSCs produced using high-speed processes but have not been thoroughly examined. Through X-ray diffraction patterns and Fourier transform infrared spectroscopy, we establish the photo-inactive MA 2 Pb 3 I 8 (DMSO) 2 as the culprit for the EQE reduction. Combined experimental and simulation results reveal that the MA 2 Pb 3 I 8 (DMSO) 2 phase is located at the hole transport layer/ interface, not on the surface, resulting in lower quantum efficiency and surface photovoltage in the short wavelength region. The residual adduct is kinetically trapped due to the short processing time (20 ms) and crystallization direction but can be removed by an additional photonic pulse. Furthermore, this study highlights the need for careful examination of resulting materials beyond device efficiency when transitioning from laboratory processing to industrial high-speed methods.

14 SOLAR ENERGY↗
DOE OSTI2025

Competing mechanisms at vibrated interfaces of density-contrast fluids

Fluid-fluid interfacial instability and subsequent fluid mixing are ubiquitous in nature and engineering. The hydrodynamic instability of fluid interfaces has long centered on the pressure gradient-driven long-wavelength Rayleigh-Taylor instability and the resonance-induced short-wavelength Faraday instability. However, neither instability alone can explain the dynamics when both mechanisms are present. We identify a previously unseen multi-modal instability emerging from their coexistence. When the denser fluid is polydimethylsiloxane, the mixed region at a high density contrast (Atwood number = 0.9) spans a vibration amplitude range approximately twice the gravitational acceleration. Using Floquet stability analysis, we show how vibrations govern transitions between the RT and Faraday instabilities, leading to contention between these instabilities rather than resonant enhancement. Here, the initial transient growth is represented by the exponential modal growth of the most unstable Floquet exponent, along with its accompanying periodic behavior. Direct numerical simulations validate these findings and track interface breakup into the multiscale and nonlinear regimes. Specifically, we show that growing RT modes nonlinearly suppresses Faraday responses even when the initial growth rate of the Faraday instability is 3.63 times that of RT, so a bidirectional competition hinders their sustained coexistence.

Direct numerical simulations↗
NASA NTRS1980

The onset and development of Kelvin-Helmholtz instability at the Venus ionopause

The paper investigates the Kelvin-Helmholtz instability at the Venus ionopause resulting from the flow of the (shocked) solar wind tangential to the ionopause for the case where the interplanetary field is oriented normal to the direction of flow. It is found that gravity stabilizes the long wavelength perturbations, and the finite thickness of the boundary layer stabilizes short wavelength modes. The magnetic 'gyroviscosity' due to finite Larmor radius effects either destabilizes the boundary or stabilizes it according to whether the solar wind electric field points away from or toward the ionosphere. For solar wind and ionosphere plasma parameters consistent with Pioneer Venus observations, it is found that the instabilities with the greatest growth rates (shortest growth times) have wavelengths of 50-150 km and growth times of 0.5 to several seconds. In addition, it is found how distortion of the ionopause by Kelvin-Helmholtz instability might lead to the formation of magnetic 'flux ropes' inside the ionosphere as well as ionospheric 'bubbles' embedded in the solar wind.

Wolff, R. S.↗
NASA NTRS1985

The whistler mode in a Vlasov plasma

In this study, properties of small-amplitude parallel and oblique whistler-mode waves are investigated for a wide range of plasma parameters by numerically solving the full electromagnetic Vlasov-dispersion equation. To investigate the cold-plasma and electrostatic approximations for the whistler mode, the results are compared with results obtained using these descriptions. For large wavelengths, the cold-plasma description is often accurate, while for short wavelengths and sufficiently oblique propagation, the electrostatic description is often accurate. The study demonstrates that in a Vlasov plasma the whistler mode near resonance has a group velocity more nearly parallel to the magnetic field than that predicted by cold-plasma theory.

Tokar, R. L.↗
NASA NTRS1989

Dust emission from high latitude cirrus clouds

In order to study dust emission from grains in the interstellar medium, the infrared properties were analyzed in a number of isolated high latitude dust clouds which contain no dominant internal heating sources. The clouds are spatially resolved, have a simple geometry, and are mapped in the IRAS bands at 12, 25, 60, and 100 microns. For a number of these clouds, extinction data (A sub B) were obtained from starcounts. A large part (30 to 50 percent) of the infrared radiation of the clouds in the IRAS wavelength range of 8 to 130 micron is emitted in the short wavelength bands at 12 and 25 micron. The 60/100 micron ratios for the integrated fluxes of the clouds have a typical value of 0.19 + or - 0.05.

Laureijs, Rene J.↗