Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPAIN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

A Coupled THMC model of FEBEX mock-up test

FEBEX (Full-scale Engineered Barrier EXperiment) is a demonstration and research project for the engineered barrier system (EBS) of a radioactive waste repository in granite. It includes two full-scale heating and hydration tests: the in situ test performed at Grimsel (Switzerland) and a mock-up test operating at CIEMAT facilities in Madrid (Spain). The mock-up test provides valuable insight on thermal, hydrodynamic, mechanical and chemical (THMC) behavior of EBS because its hydration is controlled better than that of in situ test in which the buffer is saturated with water from the surrounding granitic rock. Here we present a coupled THMC model of the mock-up test which accounts for thermal and chemical osmosis and bentonite swelling with a state-surface approach. The THMC model reproduces measured temperature and cumulative water inflow data. It fits also relative humidity data at the outer part of the buffer, but underestimates relative humidities near the heater. Dilution due to hydration and evaporation near the heater are the main processes controlling the concentration of conservative species while surface complexation, mineral dissolution/precipitation and cation exchanges affect significantly reactive species as well. Results of sensitivity analyses to chemical processes show that pH is mostly controlled by surface complexation while dissolved cations concentrations are controlled by cation exchange reactions.

54 ENVIRONMENTAL SCIENCES↗

Soil organic carbon accumulation rates on Mediterranean abandoned agricultural lands

Secondary succession on abandoned agricultural lands can produce climate change mitigation co-benefits, such as soil carbon sequestration. However, the accumulation of soil organic carbon (SOC) in Mediterranean regions has been difficult to predict and is subject to multiple environmental and land management factors. Gains, losses, and no significant changes have all been reported. Here we compile chronosequence data (n = 113) from published studies and new field sites to assess the response of SOC to agricultural land abandonment in peninsular Spain. In this work we found an overall SOC accumulation rate of +2.3% yr -1 post-abandonment. SOC dynamics are highly variable and context-dependent. Minimal change occurs on abandoned cereal croplands compared to abandoned woody croplands (+4% yr -1 ). Accumulation is most prevalent within a Goldilocks climatic window of ~13–17 °C and ~450–900 mm precipitation, promoting >100% gains after three decades. Our secondary forest field sites accrued 40.8 Mg C ha -1 (+172%) following abandonment and displayed greater SOC and N depth heterogeneity than natural forests demonstrating the long-lasting impact of agriculture. Although changes in regional climate and crop types abandoned will impact future carbon sequestration, abandonment remains a low-cost, long-term natural climate solution best incorporated in tandem with other multipurpose sustainable land management strategies.

54 ENVIRONMENTAL SCIENCES↗

Effect of soiling in CPV systems

The effect of soiling in flat PV modules has been already studied, causing a reduction of the electrical output of 4% on average. For CPV's, as far as soiling produces light scattering at the optical collector surface, the scattered rays should be definitively lost because they cannot be focused onto the receivers again. While the theoretical study becomes difficult because soiling is variable at different sites, it becomes easier to begin the monitoring of the real field performance of concentrators and then raise the following question: how much does the soiling affect to PV concentrators in comparison with flat panels?' The answers allow to predict the PV concentrator electrical performance and to establish a pattern of cleaning frequency. Some experiments have been conducted at the IES-UPM and CSES-ANU sites, consisting in linear reflective concentration systems, a point focus refractive concentrator and a flat module. All the systems have been measured when soiled and then after cleaning, achieving different increases of I{sub SC}. In general, results show that CPV systems are more sensitive to soiling than flat panels, accumulating losses in I{sub SC} of about 14% on average in three different tests conducted at IES-UPM and CSES-ANU test sites in Madrid (Spain) and Canberra (Australia). Some concentrators can reach losses up to 26% when the system is soiled for 4 months of exposure. (author)

14 SOLAR ENERGY↗

Optimization of a solar cooling system with interior energy storage

This paper focuses on the optimization of the performance of a solar absorption cooling system composed by four units with interior energy storage. A full dynamic simulation model that includes the solar collector field, the absorption heat pump system and the building load calculation has been developed. It has been applied to optimize the coupling of a system based on this new technology of solar powered absorption heat pump, to a bioclimatic building recently constructed in the Plataforma Solar de Almeria (PSA) in Spain. The absorption heat pump system considered is composed by four heat pumps that store energy in the form of crystallized salts so that no external storage capacity is required. Each heat pump is composed of two separate barrels that can charge (store energy from the solar field) and discharge (deliver heat or cold to the building) independently. Different configurations of the four units have been analysed taking into account the storage possibilities of the system and its capacity to respond to the building loads. It has been shown how strong the influence of the control strategies in the overall performance is, and the importance of using hourly simulations models when looking for highly efficient buildings. (author)

14 SOLAR ENERGY↗

Solar absorption cooling plant in Seville

A solar/gas cooling plant at the Engineering School of Seville (Spain) was tested during the period 2008-2009. The system is composed of a double-effect LiBr + water absorption chiller of 174 kW nominal cooling capacity, powered by: (1) a pressurized hot water flow delivered by mean of a 352 m{sup 2} solar field of a linear concentrating Fresnel collector and (2) a direct-fired natural gas burner. The objective of the project is to indentify design improvements for future plants and to serve as a guideline. We focused our attention on the solar collector size and dirtiness, climatology, piping heat losses, operation control and coupling between solar collector and chiller. The daily average Fresnel collector efficiency was 0.35 with a maximum of 0.4. The absorption chiller operated with a daily average coefficient of performance of 1.1-1.25, where the solar energy represented the 75% of generator's total heat input, and the solar cooling ratio (quotient between useful cooling and insolation incident on the solar field) was 0.44. (author)

14 SOLAR ENERGY↗

Spatial disaggregation of satellite-derived irradiance using a high-resolution digital elevation model

Downscaling of the Meteosat-derived solar radiation ({proportional_to}5 km grid resolution) is based on decomposing the global irradiance and correcting the systematic bias of its components using the elevation and horizon shadowing that are derived from the SRTM-3 digital elevation model (3 arc sec resolution). The procedure first applies the elevation correction based on the difference between coarse and high spatial resolution. Global irradiance is split into direct, diffuse circumsolar and diffuse isotropic components using statistical models, and then corrections due to terrain shading and sky-view fraction are applied. The effect of reflected irradiance is analysed only in the theoretical section. The method was applied in the eastern Andalusia, Spain, and the validation was carried out for 22 days on April, July and December 2006 comparing 15-min estimates of the satellite-derived solar irradiance and observations from nine ground stations. Overall, the corrections of the satellite estimates in the studied region strongly reduced the mean bias of the estimates for clear and cloudy days from roughly 2.3% to 0.4%. (author)

14 SOLAR ENERGY↗

A competing risks approach for time estimation of household WEEE disposal

The recent growth in the number of electrical and electronic devices is viewed as one the priority waste streams in European Union waste management policy. This paper presents the findings of a survey to study domestic habits with respect to Waste Electrical and Electronic Equipment (WEEE) in Spain. A specific problem when performing this estimation arises from the fact that consumers quite often store old appliances at home when they are no longer used. Focusing on four different types of appliance, survival analysis (SA) is used to study both the usage span and the reasons for no longer using each device. The time that the discarded products were kept at home before being disposed of was studied using competing risks (CR) analysis. The results of the analysis provide information on the distribution of the studied variables for the different outcomes as well as the influence exerted by the socio-demographic variables considered. Relations between these characteristics and the storage time of the appliances before disposal emerge based on survey data. For instance, the CR model finds that the storage time of the some appliances (i.e. refrigerator) is related to these social-demographics factors. However, other appliances (i.e. microwave oven) are less influenced by these factors. The attitude and motivation of the respondents to the survey as regards the End-of-Life of appliances were also analysed. A majority of respondents do not store discarded appliances at home. The first reason for storing appliances at home is the possibility of it being useful in the future and the second that the respondents did not know what to do with them.

54 ENVIRONMENTAL SCIENCES↗

A hybrid method for quasi-three-dimensional slope stability analysis in a municipal solid waste landfill

Highlights: > A quasi-three-dimensional slope stability analysis method was proposed. > The proposed method is a good engineering tool for 3D slope stability analysis. > Factor of safety from 3D analysis is higher than from 2D analysis. > 3D analysis results are more sensitive to cohesion than 2D analysis. - Abstract: Limited space for accommodating the ever increasing mounds of municipal solid waste (MSW) demands the capacity of MSW landfill be maximized by building landfills to greater heights with steeper slopes. This situation has raised concerns regarding the stability of high MSW landfills. A hybrid method for quasi-three-dimensional slope stability analysis based on the finite element stress analysis was applied in a case study at a MSW landfill in north-east Spain. Potential slides can be assumed to be located within the waste mass due to the lack of weak foundation soils and geosynthetic membranes at the landfill base. The only triggering factor of deep-seated slope failure is the higher leachate level and the relatively high and steep slope in the front. The valley-shaped geometry and layered construction procedure at the site make three-dimensional slope stability analyses necessary for this landfill. In the finite element stress analysis, variations of leachate level during construction and continuous settlement of the landfill were taken into account. The 'equivalent' three-dimensional factor of safety (FoS) was computed from the individual result of the two-dimensional analysis for a series of evenly spaced cross sections within the potential sliding body. Results indicate that the hybrid method for quasi-three-dimensional slope stability analysis adopted in this paper is capable of locating roughly the spatial position of the potential sliding mass. This easy to manipulate method can serve as an engineering tool in the preliminary estimate of the FoS as well as the approximate position and extent of the potential sliding mass. The result that FoS obtained from three-dimensional analysis increases as much as 50% compared to that from two-dimensional analysis implies the significance of the three-dimensional effect for this study-case. Influences of shear parameters, time elapse after landfill closure, leachate level as well as unit weight of waste on FoS were also investigated in this paper. These sensitivity analyses serve as the guidelines of construction practices and operating procedures for the MSW landfill under study.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Methodology for quantification of waste generated in Spanish railway construction works

Highlights: Black-Right-Pointing-Pointer Two equations for C and D waste estimation in railway construction works are developed. Black-Right-Pointing-Pointer Mixed C and D waste is the most generated category during railway construction works. Black-Right-Pointing-Pointer Tunnel construction is essential to quantify the waste generated during the works. Black-Right-Pointing-Pointer There is a relationship between C and D waste generated and railway functional units. Black-Right-Pointing-Pointer The methodology proposed can be used to obtain new constants for other areas. - Abstract: In the last years, the European Union (EU) has been focused on the reduction of construction and demolition (C and D) waste. Specifically, in 2006, Spain generated roughly 47 million tons of C and D waste, of which only 13.6% was recycled. This situation has lead to the drawing up of many regulations on C and D waste during the past years forcing EU countries to include new measures for waste prevention and recycling. Among these measures, the mandatory obligation to quantify the C and D waste expected to be originated during a construction project is mandated. However, limited data is available on civil engineering projects. Therefore, the aim of this research study is to improve C and D waste management in railway projects, by developing a model for C and D waste quantification. For this purpose, we develop two equations which estimate in advance the amount, both in weight and volume, of the C and D waste likely to be generated in railway construction projects, including the category of C and D waste generated for the entire project.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Building waste management core indicators through Spatial Material Flow Analysis: Net recovery and transport intensity indexes

Highlights: Black-Right-Pointing-Pointer Sustainability and proximity principles have a key role in waste management. Black-Right-Pointing-Pointer Core indicators are needed in order to quantify and evaluate them. Black-Right-Pointing-Pointer A systematic, step-by-step approach is developed in this study for their development. Black-Right-Pointing-Pointer Transport may play a significant role in terms of environmental and economic costs. Black-Right-Pointing-Pointer Policy action is required in order to advance in the consecution of these principles. - Abstract: In this paper, the material and spatial characterization of the flows within a municipal solid waste (MSW) management system are combined through a Network-Based Spatial Material Flow Analysis. Using this information, two core indicators are developed for the bio-waste fraction, the Net Recovery Index (NRI) and the Transport Intensity Index (TII), which are aimed at assessing progress towards policy-related sustainable MSW management strategies and objectives. The NRI approaches the capacity of a MSW management system for converting waste into resources through a systematic metabolic approach, whereas the TII addresses efficiency in terms of the transport requirements to manage a specific waste flow throughout the entire MSW management life cycle. Therefore, both indicators could be useful in assessing key MSW management policy strategies, such as the consecution of higher recycling levels (sustainability principle) or the minimization of transport by locating treatment facilities closer to generation sources (proximity principle). To apply this methodological approach, the bio-waste management system of the region of Catalonia (Spain) has been chosen as a case study. Results show the adequacy of both indicators for identifying those points within the system with higher capacity to compromise its environmental, economic and social performance and therefore establishing clear targets for policy prioritization. Moreover, this methodological approach permits scenario building, which could be useful in assessing the outcomes of hypothetical scenarios, thus proving its adequacy for strategic planning.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A Cumulative Energy Demand indicator (CED), life cycle based, for industrial waste management decision making

Highlights: • We developed a methodology useful to environmentally compare industrial waste management options. • The methodology uses a Net Energy Demand indicator which is life cycle based. • The method was simplified to be widely used, thus avoiding cost driven decisions. • This methodology is useful for governments to promote the best environmental options. • This methodology can be widely used by other countries or regions around the world. - Abstract: Life cycle thinking is a good approach to be used for environmental decision-support, although the complexity of the Life Cycle Assessment (LCA) studies sometimes prevents their wide use. The purpose of this paper is to show how LCA methodology can be simplified to be more useful for certain applications. In order to improve waste management in Catalonia (Spain), a Cumulative Energy Demand indicator (LCA-based) has been used to obtain four mathematical models to help the government in the decision of preventing or allowing a specific waste from going out of the borders. The conceptual equations and all the subsequent developments and assumptions made to obtain the simplified models are presented. One of the four models is discussed in detail, presenting the final simplified equation to be subsequently used by the government in decision making. The resulting model has been found to be scientifically robust, simple to implement and, above all, fulfilling its purpose: the limitation of waste transport out of Catalonia unless the waste recovery operations are significantly better and justify this transport.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Implementation of waste-to-energy options in landfill-dominated countries: Economic evaluation and GHG impact

Highlights: • Replacing landfilling with WtE schemes in landfill-dominated European countries. • WtE schemes provide GHG reduction potential compared with landfilling. • Gasification schemes compare favorably with incineration. • Gasification with engine is the best option for GHG emissions and profitability. • Gate fee is the main factor affecting profitability in WtE schemes. - Abstract: The economic and environmental impact of several waste-to-energy (WtE) schemes to produce electricity from municipal solid waste (MSW) refuse is evaluated and compared with landfill disposal. Both incineration and gasification alternatives are considered. The gasification option includes three different configurations: (1) a fluidized bed gasifier (FBG) with internal combustion engine (ICE), (2) a FBG with organic Rankine cycle (ORC) and (3) a grate gasifier with steam Rankine cycle (SRC). The study is primarily applied to regions where the management system is based on Mechanical Biological Treatment (MBT) plants, generating a large share of refuse (>70%), which is currently landfilled. The specific case of Andalusia, a region in the south of Spain with 23 MBT plants distributed over a region of 87.000 km{sup 2}, where about 80% of municipal solid waste (MSW) is currently landfilled, is taken as main reference; thereafter, the study is further extended to preliminary assess other regions of some European landfill-dominated countries with similar characteristics. The results show that both incineration and gasification improve landfill disposal, contributing favorably to greenhouse gas (GHG) reduction and fulfilling EU environmental regulations, although the three gasification options analyzed yield lower GHG emissions than incineration. In addition, gasification enables better integration of WtE into existing MBT plants, especially in the particular case of Andalusia, where MBT plants are widespread on the region, making it a more promising option than incineration, which is mainly based on large centralized plants, and less socially accepted. From the options analyzed, the WtE scheme based on FBG with ICE gives the highest profitability for a given gate fee, due to much higher electrical efficiency. However, FBG with ORC seems to be a better option in the short-term for landfill-dominated countries, due to its higher technical reliability and the low gate fee currently available in these countries.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Stable lead isotope compositions in selected coals from around the world and implications for present day aerosol source tracing

The phasing out of leaded gasoline in many countries around the world at the end of the last millennium has resulted in a complex mixture of lead sources in the atmosphere. Recent studies suggest that coal combustion has become an important source of Pb in aerosols in urban and remote areas. Lead concentration and isotopic composition is reported for 59 coal samples representing major coal deposits worldwide in an attempt to characterize this potential source. The average concentration in these coals is 35 {mu}g Pb g{sup -1}, with the highest values in coals from Spain and Peru and the lowest in coals from Australia and North America. The {sup 206}Pb/{sup 207}Pb isotope ratios range between 1.15 and 1.24, with less radiogenic Pb in coals from Europe and Asia compared to South and North America. Comparing the Pb isotopic signatures of coals from this and previous studies with those published for Northern and Southern Hemisphere aerosols, we hypothesize that coal combustion might now be an important Pb source in China, the eastern U.S., and to some extent, in Europe but not as yet in other regions including South Africa, South America, and western U.S. This supports the notion that 'old Pb pollution' from leaded gasoline reemitted into the atmosphere or long-range transport (i.e., from China to the western U.S.) is important. Comparing the isotope ratios of the coals, the age of the deposits, and Pb isotope evolution models for the major geochemical reservoirs suggests that the lead isotope ratios (PbIC) in coals is strongly influenced by the depositional coal forming environment. 47 refs., 3 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

Time Evolution of Activity Concentration of Natural Emitters in a Scenario Affected By Previous Phosphogypsum Contamination

The estuary formed by the confluence of Tinto and Odiel river-mouths is located in the South of Spain, close to Huelva town. This estuary has been deeply studied through the years because it has a double particularity. On one hand, since the beginning of the 1960s, the estuary has been affected by direct and indirect phosphogypsum (pg.) releases from two phosphoric acid and fertilizers factories that are working in the area. On the other hand, the pyrite mining operations upstream the Odiel and Tinto rivers has caused historically the formation of H{sub 2}SO{sub 4}, through oxidation of the natural sulphur deposits, the acidification of the waters and the consequent mobilisation of heavy metals from the mining area to the Huelva estuary. As a consequence, enhancement contamination levels in natural emitters from the {sup 238}U series were found in the surroundings of the factories in the previous years to 1998. However, in 1998 the management policy of waste releases drastically changed in the area, and direct discharges to Tinto and Odiel River had to be ceased.A thorough study of the affected zone is being carried out. Riverbed sediments and water samples have been analyzed from four different sampling campaigns in the estuary during the years 1999, 2001, 2002 and 2005. Different radioanalytical techniques have been employed to obtain the activity concentrations of U-isotopes, Th-isotopes, {sup 226}Ra, {sup 210}Pb and {sup 210}Po. Furthermore, the results for the rates of de-contamination of the area are presented. This data will be discussed in order to establish the present status of the contamination in the area, and moreover, to predict the time-evolution of the self-cleaning.

54 ENVIRONMENTAL SCIENCES↗

Methodology Used in the Radiological Assessment of a Coal-Fired Power Plant

A radiological assessment of the workers and the public potentially affected by the operation of the Teruel Coal-fired Power Plant (the UPT Teruel), was performed under realistic assumptions. This assessment is part of a wider study to characterize the potential radiological impact of Naturally Occurring Radioactive Materials (NORM), in which our team, integrated by University of Extremadura and CIEMAT, is carrying out the study on coal-fired power plants sponsored by the Spanish Nuclear Safety Council (CSN). The study comprises the four biggest coal-fired power plants in Spain. Taking into account the working conditions and the plant specifications, six groups of workers were defined, established considering the 17 working tasks that could be of any importance for this assessment. For the public, considering that the area is barely inhabited, two different recreational scenarios were defined. Therefore, in-plant and outside measurements, needed for the assessment of each scenario, were carried out. Where experimental data were not available or measurements ranged within the natural background radiation values, modelling has been used. Every measured or estimated activity concentration in coal and other used materials or in the by-products generated in the power plant, for every radionuclide in the natural chains of {sup 238}U, {sup 232}Th and {sup 40}K, were below 0.32 Bq g{sup -1}. Those values are under the 0.5 Bq g{sup -1} reference value for exemption and clearance of {sup 238}U, {sup 232}Th and {sup 226}Ra and the 5 Bq g{sup -1} for {sup 40}K recommended in Europe. In the dose evaluations for six groups of workers, a maximum of 21 {mu}Sv a{sup -1} was obtained (mainly due to the inhalation of resuspended particles). For both considered scenarios for the public, all the evaluated doses were below 4.3 {mu}Sv a{sup -1}. These results are considered negligible from a radiological point of view. In this work the models and assumptions used for the evaluation of workers and public doses, the assessment, as well as the most relevant experimental results and conclusions are presented.

54 ENVIRONMENTAL SCIENCES↗

Measurement of {sup 210}Pb and its Application to Evaluate Contamination in an Area Affected by NORM Releases

Liquid scintillation counting (LSC) is an easy and straightforward technique, and combined with its low limit of detection, makes it a powerful tool for both routine and low level measurements that can be applied to {sup 210}Pb low level counting in environmental samples. {sup 210}Pb can be easily measured following a sulphate co-precipitation method; the addition of a carrier and the weighing of the recovered amount is a widespread technique to evaluate radiochemical yield, however, this evaluation of the recovery is sometimes questioned. The samples employed in this work were recollected in 1999 and 2005 from the estuary of the Odiel and Tinto rivers (SW of Spain), which were affected by phosphogypsum (pg.) discharges until 1998. Phosphogypsum contains most of the {sup 210}Pb from the treated raw material, for that reason analysed riverbed sediments have enhanced {sup 210}Pb activity concentrations and hence, enhanced activity concentration of its daughter {sup 210}Po, both in secular equilibrium after two years.

54 ENVIRONMENTAL SCIENCES↗

Status and recent results of MAGIC

MAGIC is a single-dish Cherenkov telescope located on La Palma (Spain), hence with an optimal view on the Northern sky. Sensitive in the 30 GeV-30 TeV energy band, it is nowadays the only ground-based instrument being able to measure high-energy {gamma}-rays below 100 GeV. We review the most recent experimental results obtained using MAGIC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Rehabilitation of semi-arid coal mine spoil bank soils with mine residues and farm organic by-products

A method of rehabilitating coal mine soils was studied under the conditions of a semi-arid climate, lack of topsoil but availability of farm by-products in NE Spain. The objectives of the research were to assess a new method in order to achieve a suitable substrate for the establishment of native vegetation, to evaluate environmental impacts associated with the reclamation process, and to determine the time necessary to integrate the treated area into the surrounding environment. Eight plots (10 x 35 m{sup 2}) were established in September 1997. Substrate combinations of two types of mine spoil (coal dust and coarse-sized material), two levels of pig slurry (39 and 94 Mg ha{sup -1}dry-wt), and cereal straw (0 and 15 Mg ha{sup -1}) were applied. Monitoring of select physical and chemical soil properties and vegetation characteristics was performed from 1997 until 2005. The bulk density and the saturated hydraulic conductivity measured did not limit plant development and water availability. Initial substrate salinity (1.37 S m{sup -1}) decreased with time and in the long term did not limit plant colonization to salinity-adapted species. Initial nitrate concentration was 298 mg kg{sup -1}, but was reduced significantly to acceptable values in 3 years (55 mg kg{sup -1}) and the measured pH (7.6) was maintained at the level of initial spoil values. Vegetation cover reached up to 90%. In the treated area, spontaneous vegetation cover (15 to 70%) colonized the nonsown areas widely. In the medium term, vegetation cover tended to be higher in plots with a thicker layer of coal dust material and the higher slurry rate. Soil rehabilitation and environmental reintegration, taking into account soil and vegetation indicators, was possible in the studied area with low cost inputs using residual materials from mining activities and animal husbandry by-products.

01 COAL, LIGNITE, AND PEAT↗