Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEGREGATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

A Comparison of Solidification Structures and Submicroscale Cellular Segregation in Rapidly Solidified Stainless Steels Produced via Two-Piston Splat Quenching and Laser Powder Bed Fusion

Fusion-based additive manufacturing techniques leverage rapid solidification (RS) conditions to create parts with complex geometries, unique microscale/nanoscale morphological features, and elemental segregation. Three custom composition stainless steel alloys with varying chromium equivalence to nickel equivalence ratio (Cr eq /Ni eq ) between 1.53 and 1.95 were processed using laser powder bed fusion (LPBF) and/or two-piston splat quenching (SQ) to produce solidification rates estimated between 0.4 and 0.8 m/s. Both scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were utilized to collect high-resolution images, electron backscatter diffraction (EBSD) phase identification, and measure cellular segregation. Similar features were observed in both LPBF and SQ samples including phase and microstructure, nanoscale oxide particles, cell size, and segregation behavior. However, dislocation pileup was observed along the cell boundaries only in the LPBF austenite solidified microstructure. Targeted adjustment of the SQ feedstock Cr and Ni concentrations, within the ASTM A240 specification for 316L resulted in no observable impact on the cell size, oxide particle size, or magnitude of segregation. Also, the amount of Ni segregation in the ferrite solidified microstructures did not significantly differ, regardless of Cr/Ni eq or processing technique. Here, SQ is demonstrated as capable of simulating RS rates and microstructures similar to LPBF for use as an alternative screening tool for new RS alloy compositions.

42 ENGINEERING↗

Learning Grain-Boundary Segregation: From First Principles to Polycrystals

The segregation of solute atoms at grain boundaries (GBs) can strongly impact the structural and functional properties of polycrystals. Yet, due to the limited availability of simulation tools to study polycrystals at the atomistic scale (i.e., interatomic potentials), there is a minimal understanding of the variation of solute segregation tendencies across the very complex space of GB microenvironments and the large range of alloys in which it can occur. Here, we develop an algorithmic framework that can directly learn the full spectrum of segregation energies for a metal solute atom in a metal polycrystal from ab initio methods, bypassing the need for alloy interatomic potentials. This framework offers a pathway to a comprehensive catalog of GB solute segregation with quantum accuracy, for the entire alloy space. As an initial demonstration in this pursuit, we build an extensive GB segregation database for aluminum-based alloys across the periodic table, including dozens of alloys for which there are substantially no prior data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reverse segregation and self-organization in inclined chute flows of bidisperse granular mixtures

In the usual segregation scenario for stable inclined chute flows of bidisperse mixtures of fine and coarse spherical particles, coarse particles rise toward the free surface, forming a coarse-rich region atop the flowing pile. Beyond a threshold coarse-to-fine diameter ratio of approximately 4, conversely, the weight of the coarse particles exceeds the segregation driving forces, causing individual coarse particles to sink within the pile and producing a reversed segregation state. However, an understanding of the collective evolution of the pile structure is still lacking when the particle diameter ratio exceeds 4 and the coarse-particle mass fraction is appreciable. To explore this broadly bidisperse limit, we perform discrete element method simulations considering mean particle diameter ratios of up to 8 and coarse-particle mass fractions spanning 0.1 to 0.9. The steady-state flow profiles reveal several intriguing behaviors that depend on the diameter ratio and mass fraction. These include a previously identified transition from usual to reverse segregation and a newfound tendency to self-organize into alternating coarse- and fine-rich particle layers stacked along the shear gradient direction, with layer thickness dictated by the coarse-particle diameter. A fuller understanding of segregation at this scale could pave the way for enhanced mixing or demixing techniques at the commercial scale.

granular flow↗

Multiscale Modeling of Grain Boundary Segregation and Embrittlement in Tungsten for Mechanistic Design of Alloys for Coal Fired Plants

Based on a recent discovery of premelting-like grain boundary segregation in refractory metals occurring at high temperatures and/or high alloying levels, this project investigated grain boundary segregation and embrittlement in tungsten (W) based alloys. Specifically, new interfacial thermodynamic models have been developed and quantified to predict high-temperature grain boundary segregation in the W-Ni binary alloy and W-Ni-Fe, W-Ni-Ti, W-Ni-Co, W-Ni-Cr, W-Ni-Zr and W-Ni-Nb ternary alloys. The thermodynamic modeling results have been experimentally validated for selected systems. Furthermore, multiscale modeling has been conducted at continuum, atomistic and quantum-mechanical levels to link grain boundary segregation with embrittlement. In summary, this 3-year project has successfully developed a theoretical framework in combination with a multiscale modeling strategy for predicting grain boundary segregation and embrittlement in W based alloys.

20 FOSSIL-FUELED POWER PLANTS↗

Martian thermal history, core segregation, and tectonics

A series of calculated thermal histories of Mars is presented, and their possible relation to surface tectonic history is discussed. The models include convective heat transport through an empirical approximation, and heating by radioactivity and core segregation. Initial temperature and the timing and duration of core segregation are treated as free parameters. The initial temperature is the main determinant of Martian thermal evolution: as it is varied from 20 to 100% of the present mean temperature, the maximum in surface heat flux moves from very recent to very early in Martian history. For the latter cases, the details of core segregation control the detailed timing of a peak in the thermal flux that exceeded 100 mW/sq m. It is suggested that the early disruption of cratered terrain crust in the northern hemisphere and subsequent volcanic resurfacing may have been related to core segregation. This would be consistent with a scenario in which an early period of core segregation generated a marked peak in the thermal flux that may have led to extensive partial melting and volcanism. This scenario would require Mars to have had an initial mean temperature comparable to the present value.

Davies, G. F.↗

The effect of diffusive hydrogen segregation on fracture of polycrystalline nickel

Hydrogen embrittlement of polycrystalline nickel was studied under conditions which allowed the diffusion and segregation of hydrogen to grain boundaries to be controlled. It was shown that even at high solute concentrations of hydrogen, the fracture mode was ductile shear rupture, if transport of hydrogen to the grain boundaries was not allowed. As the amount of hydrogen segregation to the grain boundaries was increased, the fracture mode became increasingly intergranular. Analysis of the temperature dependence of this transition from ductile rupture to transgranular fracture yields a hydrogen segregation enthalpy of 11.6 kJ/mol. The transition in the fracture mode was also observed at a constant aging temperature by increasing the solute hydrogen concentration. The kinetics of this fracture transition suggest that the hydrogen segregation layer extends about 35 nm from the grain boundary. It is suggested that the fracture mechanism is a softening of the material in this segregation region due to the high hydrogen concentration.

Lassila, D. H.↗

Photoinduced Halide Segregation in Ruddlesden–Popper 2D Mixed Halide Perovskite Films

2D lead halide perovskites, which exhibit bandgap tunability and increased chemical stability, have been found to be useful for designing optoelectronic devices. Reducing dimensionality with decreasing number of layers (n = 10–1) also imparts resistance to light-induced ion migration as seen from the halide ion segregation and dark recovery in mixed halide (Br:I = 50:50) perovskite films. The light-induced halide ion segregation efficiency, as determined from difference absorbance spectra, decreases from 20% to <1% as the dimensionality is decreased for 2D perovskite film from n = 10 to 1. The segregation rate constant (ksegregation), which decreases from 5.9 × 10 –3 s –1 (n = 10) to 3.6 × 10 –4 s –1 (n = 1), correlates well with nearly an order of magnitude decrease observed in charge-carrier lifetime (τ average = 233 ps for n = 10 vs τ avg = 27 ps for n = 1). The tightly bound excitons in 2D perovskites make charge separation less probable, which in turn decreases the halide mobility and resulting phase segregation. Furthermore, the importance of controlling the dimensionality of the 2D architecture in suppressing halide ion mobility is discussed.

14 SOLAR ENERGY↗

Interface-Driven Structural Distortions and Composition Segregation in Two-Dimensional Heterostructures

The discovery of emergent phenomena in 2D materials has sparked substantial research efforts in the materials community. A significant experimental challenge for this field is exerting atomistic control over the structure and composition of the constituent 2D layers and understanding how the interactions between layers drive both structure and properties. While no segregation for single bilayers was observed, segregation of Pb to the surface of three bilayer thick PbSe–SnSe alloy layers was discovered within [(Pb x Sn 1– x Se) 1+δ ] n (TiSe 2 ) 1 heterostructures using electron microscopy. This segregation is thermodynamically favored to occur when Pb x Sn 1– x Se layers are interdigitated with TiSe 2 monolayers. DFT calculations indicate that the observed segregation depends on what is adjacent to the Pb x Sn 1– x Se layers. As a result, the interplay between interface- and volume-free energies controls both the structure and composition of the constituent layers, which can be tuned using layer thickness.

2D materials↗

Effect of Trace Levels of Si on Microstructure and Grain Boundary Segregation in DOP-26 Iridium Alloy

In this work, the thermodynamics and kinetics of Silicon (Si) segregation to grain boundaries in Iridium alloy DOP-26 with added trace levels of Si of 6, 11, 29, and 36 wppm was studied by Auger Electron Spectroscopy. The four alloys were annealed at 1500 or 1535 °C for 19 or 76 hours followed by cooling at three different rates. Si enrichment at the grain boundaries (GB) increased with increasing bulk Si content, with the grain boundary Si enrichment factors ranging from 62 to 344, depending on the bulk Si content and the cooling rate. Grain boundary Si contents increased with decreasing cooling rate in all alloys, indicating that Si GB segregation is influenced by both thermodynamic and kinetic factors in the alloys and temperature ranges of the study. A Langmuir-McLean isotherm-based model was successfully used to predict the temperature dependence of GB Si segregation in DOP-26 alloys with Si additions and estimate the temperature independent free energy of Si segregation to grain boundaries in DOP-26.

36 MATERIALS SCIENCE↗

Recalescence and Segregation Phenomena During Equiaxed Dendritic Solidification of Fe-C Alloy

Recalescence and segregation are two characteristic phenomena for the equiaxed dendritic solidification of alloys. The present work developed a two-dimensional dendritic model with cellular automaton (CA) method to investigate influence mechanisms of thermal conditions on recalescence and segregation behaviors of Fe-0.82wt pct C alloy. The released latent heat reduces the undercooling around the equiaxed dendrite, and thus eases its growth velocity. The predicted steady growth velocity agrees well with the analytical results as the melt undercooling is 9 K. Additionally, the present CA model can ensure the growth consistence of equiaxed dendrites in the undercooled melt. With improving the convective heat transfer coefficients applied around the domain boundaries, the temperature recalescence in the domain center becomes more significant, and the corresponding solid fractions enhance. It is because that the stronger cooling promotes the solidification, resulting in more latent heat released. Accordingly, the heat dissipation can be neutralized. Moreover, a deeper undercooling for the temperature recalescence is needed under a stronger cooling condition. With the increase of both the cooling rate and the convection coefficient, secondary arms of the equiaxed dendrite become more developed. At the lower cooling rate range, the segregation ratio in the domain enlarges with the improvement of the cooling rate. However, it gets weaker under the condition with super cooling intensity due to the expansion of the low concentration region. As the convection coefficient is enhanced, the solute segregation in the domain gets less pronounced.

36 MATERIALS SCIENCE↗

The Effect of Grain Boundary Facet Junctions on Segregation and Embrittlement

Junctions are discontinuities in flat grain boundaries that arise in all polycrystalline materials and are thought to play important roles in the response of a grain boundary network to thermal and mechanical loads. A key open question concerns the mechanisms by which solute segregation to junctions impacts properties of the grain boundary. Here, in this work, we investigate the influence of grain boundary facet junctions on solute embrittlement, and we present an analytical model that uses the hydrostatic stress field contributed by dislocations at multiple junctions to describe these effects. Specifically, we study junctions between {112} facets of various lengths in Au $\langle111\rangle$ Σ3 tilt grain boundaries. Copper and silver solutes are employed to determine if the effect of junctions on solute segregation and embrittlement is dependent on size relative to the host. Combined, atomistic simulation data and the analytical model show that Cu and Ag have opposite segregation responses to junctions due to the sign of the hydrostatic stress field induced by junctions. However, a positive shift in the embrittling potency is computed near junctions regardless of solute type or the stress state of the segregation site. Hence, for the conditions studied, junctions consistently shift the energetic landscape towards embrittlement.

36 MATERIALS SCIENCE↗

Chemical complexity suppresses interstitial solute segregation to screw dislocation cores in the bcc NbTaTiHfZr high-entropy alloy

Recent reports suggest that interstitial solute additions to body-centered cubic (bcc) high-entropy alloys (HEAs) may enhance their mechanical properties. However, details of interactions between interstitial atoms and dislocations in these HEAs remain incompletely understood. Using first-principles calculations, we examine the energetics of C, N, and O interstitial solutes in elemental bcc metals and NbTaTiHfZr, focusing on their segregation in screw dislocation cores. We examine two types of core sites and show that the low-energy configuration and associated segregation energy depend on the transition metal group. In NbTaTiHfZr, we find that chemical complexity substantially suppresses interstitial segregation in dislocation cores, as fluctuations in bulk solute energies induce energetically favorable sites that disfavor segregation to core sites. Local chemical order further enhances this effect by promoting solute clustering away from dislocation cores. These findings reveal fundamental differences between the behavior of interstitial atoms in elemental metals and HEAs, with implications for high-temperature plasticity and dynamic strain aging.

Body-centered cubic transition metals↗

Competing dopants grain boundary segregation and resultant seebeck coefficient and power factor enhancement of thermoelectric calcium cobaltite ceramics

Here, the present work demonstrates the feasibility of increasing the values of Seebeck coefficient S and power factor of calcium cobaltite Ca 3 Co 4 O 9 ceramics through competing dopant grain boundary segregation. The nominal chemistry of the polycrystalline material system investigated is Ca 3–x Bi x Ba y Co 4 O 9 with simultaneous stoichiometric substitution of Bi for Ca and non-stoichiometric addition of minute amounts of Ba. There is continuous increase of S due to Bi substitution and Ba addition. The electrical resistivity also changes upon doping. Overall, the power factor of best performing Bi and Ba co-doped sample is about 0.93 mW m –1 K –2 , which is one of the highest power factor values ever reported for Ca 3 Co 4 O 9 , and corresponds to a factor of 3 increase compared to that of the baseline composition Ca 3 Co 4 O 9 . Systematic nanostructure and chemistry characterization was performed on the samples with different nominal compositions. When Bi is the only dopant in Ca 3 Co 4 O 9 , it can be found at both the grain interior and the grain boundaries GBs as a result of segregation. When Bi and Ba are added simultaneously as dopants, competing processes lead to the segregation of Ba and depletion of Bi at the GBs, with Bi present only in the grain interior. Bi substitution in the lattice increases the S at both the low and high temperature regimes, while the segregation of Ba at the GBs dramatically increase the S at low temperature regime.

36 MATERIALS SCIENCE↗

Density functional study of atomic arrangements in CrMnFeCoNi high-entropy alloy and their impact on vacancy formation energy and segregation

Here, using the density functional theory-coupled Monte Carlo approach, we explored the chemical short-range order (SRO) and element segregation in equimolar CrMnFeCoNi alloy. We found that state-of-the-art approximation of random element distribution is only applicable at > 1100 K close to the melting temperature, while the Cr-Cr repulsion driving the system stabilization and accompanying the formation of cubic Cr sublattice, and mild Ni-Ni attraction are the most prominent pair interactions at lower temperatures. Chemical potential and vacancy formation energy calculations indicate that Cr is most sensitive to the local chemical environment, making Cr atoms most stabilized when the preferred SRO is introduced. While the vacancy formation is predicted equally probable among five constituting elements in the random solid solution, Cr and Ni atoms show the lowest vacancy formation energies in the structure with SRO. Furthermore, distinct element segregation was predicted in the vicinity of planar defects, including symmetric tilt grain boundary and stacking fault, which we correlated to the site- and chemistry-dependent atomic volume and bond lengths. It suggests that the local mechanical strain and bond energy induce the SRO development and element segregation: Namely, the system takes advantage of segregation of Ni atoms having large atomic volume or Cr-Cr pairs having elongated bond lengths to fill in the excess volume at defects that relaxes the mechanical strain field and optimizes bond energy distribution. The correlation between the SRO and properties of CrMnFeCoNi alloy needs further investigations, which is expected to greatly help understand and control the properties of high-entropy alloys.

36 MATERIALS SCIENCE↗

Use of friction stir processing to synthesize nanocrystalline, grain boundary segregating Fe-Ti alloys

Grain boundary segregating alloys, a class of alloys designed such that nanocrystalline grain sizes are thermodynamically stabilized by the presence of high segregation energy solutes at the grain boundaries, are typically produced through geometrically limited processing techniques such as equal channel angular extrusion or thin film sputtering. Here, this study explores the use of friction stir processing (FSP) as a novel means of studying and producing these alloys using a test system of Fe-6at%Ti. Spot FSPs with a range of processing parameter sets were produced on bulk, coarse grained bars of material and optimal parameters were identified. Microscopy identified a range of processed materials which achieved nanocrystalline grains on the order of 100 nm, delineating a critical window of processing parameters which limit heat input while inducing sufficient plastic deformation for grain refinement. The finest grained nanocrystalline Fe-Ti achieved a hardness of 7.68 GPa, a significant increase in hardness over pure Fe with a similar microstructure due to increased dislocation density from FSP as well as several strengthening mechanisms produced through the presence and segregation of Ti. These results demonstrated the feasibility of using FSP to produce nanocrystalline grain boundary segregating alloys.

Fe alloys↗

Irradiation-induced segregation at dislocation loops in CoCrFeMnNi high entropy alloy

To understand the redistribution of alloying elements in high entropy alloys under irradiation, we irradiated a CoCrFeMnNi alloy with 1 MeV Kr ions at room temperature and at 500°C, and characterized with atom probe tomography and transmission electron microscopy. At 500°C, Co and Ni were enriched around the interstitial, faulted and perfect, dislocation loops resulted from the ion irradiation. In contrast, no segregation was observed at room temperature. The inverse Kirkendall effect through vacancy flux, as opposed to the interstitial binding mechanism, was the primary underlying process attributing to the observed segregation. In addition, a ring-shaped segregation pattern was observed at the faulted dislocation loops, indicating a non-equilibrium nature of the defect clustering and solute segregation process in CoCrFeMnNi under irradiation at high temperature.

36 MATERIALS SCIENCE↗

Impact of nanoparticle size and shape on selective surface segregation in polymer nanocomposites

A study of the impact of the size and shape of a nanoparticle on the evolution of structure and surface segregation in polymer nanocomposite thin films is presented. This is realized by monitoring the evolution of structure with thermal annealing and equilibrium depth profile of a deuterated polystyrene/ protonated polystyrene bilayer in the presence and absence of various nanoparticles. For the three shapes examined, sheet-like graphene, cylindrical carbon nanotubes, and spherical soft nanoparticles, the presence of the nanoparticles slowed the inter-diffusion of the polymers in the thin film. The larger nanoparticles slowed the polymer motion the most, while the smaller spherical nanoparticles also significantly inhibited polymer chain diffusion. At equilibrium, the soft spherical nanoparticles, which are highly branched, segregate to the air surface, resulting in a decrease in the excess deuterated PS at the surface. The graphene sheets and single walled carbon nanotubes, on the other hand, enhanced the dPS segregation to the air surface. The graphene sheets were found to segregate to the silicon surface, due to their higher surface energy. Interpretation of these results indicates that entropic factors drive the structural development in the nanocomposite thin films containing the spherical nanoparticles, while a balance of the surface energies of the various components (i.e. enthalpy) controls the thin film structure formation in the polymer-carbon nanoparticle nanocomposites.

nanocomposite↗

Kinetic theory-based numerical modeling and analysis of bi-disperse segregated mixture fluidized bed

We discuss a series of continuum Euler-Euler simulations of an initially mixed bi-disperse fluidized bed which segregates under certain operating conditions. The simulations use the multi-phase kinetic theory-based description of the momentum and energy exchanges between the phases by Simonin’s Group [see e.g. Gourdel, Simonin and Brunier (1999). Proceedings of 6th International Conference on Circulating Fluidized Beds, Germany, pp. 205-210]. The discussion and analysis of the results focus on the fluid-particle momentum exchange (i.e. drag). Simulations using mono- and poly-disperse fluid-particle drag correlations are analyzed for the Geldart D-type size bi-disperse gas-solid experiments performed by Goldschmidt et al. [Powder Tech., pp. 135-159 (2003)]. The poly-disperse gas-particle drag correlations account for the local particle size distribution by using an effective mixture diameter when calculating the Reynolds number and then correcting the resulting force coefficient. Simulation results show very good predictions of the segregation index for bidisperse beds with the mono-disperse drag correlations contrary to the poly-disperse drag correlations for which the segregation rate is systematically under-predicted. The statistical analysis of the results shows a clear separation in the distribution of the gas-particle mean relaxation times of the small and large particles with simulations using the mono-disperse drag. In contrast, the poly-disperse drag simulations have a significant overlap and also a smaller difference in the mean particle relaxation times. This results in the small and large particles in the bed to respond to the gas similarly without enough relative time lag. The results suggest that the difference in the particle response time induce flow dynamics favorable to a force imbalance which results in the segregation.

97 MATHEMATICS AND COMPUTING↗