Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SATELLITE CONFIGURATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Experimental Investigation of Drag Modulation Aerocapture: Drag-Skirt Separation in Hypersonic Free Flight

Free flight tests were conducted in carbon dioxide at Mach 12 of notional drag modulation aerocapture configurations for a small satellite mission to Venus. The configurations were based on research conducted at the Georgia Institute of Technology, University of Colorado Boulder, Jet Propulsion Laboratory, and Ames Research Center. The drag modulation aerocapture approach being studied involves an atmospheric entry vehicle that employs an attached drag device, a drag skirt, that is jettisoned at the appropriate time to allow the payload-portion of the vehicle to exit the atmosphere, slowed enough to be captured into orbit. A total of eight tests were performed. Reynolds numbers, based on the pre-separation base diameter, ranged from 0.82 x 106 to 2.96 x 106. The tests demonstrated the feasibility of a clean drag skirt separation at hypersonic speeds and, for the conditions of the tests, the stability of the central flight system body during and after separation from the drag skirt. Two drag skirt geometries were tested: an axisymmetric conical frustum, and a faceted frustum representative of a mechanically-deployable device. Drag skirts of various masses were tested to examine the effect of pre- and post-separation ballistic coefficient ratio on the separation dynamics. A new test capability for multi-body interactions in hypersonic free flight was developed for these tests, and is described.

aerocapture↗

Performance projections for laser beam power to space

We examine the requirements placed on an adaptive-optics system used to compensate atmospheric effects in propagating high-power lasers from ground to space. The particular application involves energy transfer from a ground station to a satellite. Our analysis explores performance associated with various beacon configurations, including satellite-based beacons, beacons in the lead-ahead direction, and synthetic beacons. Other system parameters are adjusted as well, including number of actuators in the deformable mirror and bandwidth of the servo system. We show that with an optimized system design it is possible to achieve collection efficiencies of 10-50 percent over zenith angles as great as 70 deg.

Greenwood, Darryl P.↗

Telemetry Data Collection from Oscar Satellite

This paper discusses the design, configuration, and operation of a satellite station built for the Center for Space Telemetering and Telecommunications Laboratory in the Klipsch School of Electrical and Computer Engineering Engineering at New Mexico State University (NMSU). This satellite station consists of a computer-controlled antenna tracking system, 2m/70cm transceiver, satellite tracking software, and a demodulator. The satellite station receives satellite,telemetry, allows for voice communications, and will be used in future classes. Currently this satellite station is receiving telemetry from an amateur radio satellite, UoSAT-OSCAR-11. Amateur radio satellites are referred to as Orbiting Satellites Carrying Amateur Radio (OSCAR) satellites as discussed in the next section.

Haddock, Paul C.↗

Apollo guidance, navigation, and control: Candidate configuration trade study, Stellar-Inertial Measurement System (SIMS) for an Earth Observation Satellite (EOS)

The ten candidate SIMS configurations were reduced to three in preparation for the final trade comparison. The report emphasizes subsystem design trades, star availability studies, data processing (smoothing) methods, and the analytical and simulation studies at subsystem and system levels from which candidate accuracy estimates will be presented.

Ogletree, G.↗

Optimizing Orbit-Instrument Configuration for Global Precipitation Mission (GPM) Satellite Fleet

Following the scientific success of the Tropical Rainfall Measuring Mission (TRMM) spearheaded by a group of NASA and NASDA scientists, their external scientific collaborators, and additional investigators within the European Union's TRMM Research Program (EUROTRMM), there has been substantial progress towards the development of a new internationally organized, global scale, and satellite-based precipitation measuring mission. The highlights of this newly developing mission are a greatly expanded scope of measuring capability and a more diversified set of science objectives. The mission is called the Global Precipitation Mission (GPM). Notionally, GPM will be a constellation-type mission involving a fleet of nine satellites. In this fleet, one member is referred to as the "core" spacecraft flown in an approximately 70 degree inclined non-sun-synchronous orbit, somewhat similar to TRMM in that it carries both a multi-channel polarized passive microwave radiometer (PMW) and a radar system, but in this case it will be a dual frequency Ku-Ka band radar system enabling explicit measurements of microphysical DSD properties. The remainder of fleet members are eight orbit-synchronized, sun-synchronous "constellation" spacecraft each carrying some type of multi-channel PMW radiometer, enabling no worse than 3-hour diurnal sampling over the entire globe. In this configuration the "core" spacecraft serves as a high quality reference platform for training and calibrating the PMW rain retrieval algorithms used with the "constellation" radiometers. Within NASA, GPM has advanced to the pre-formulation phase which has enabled the initiation of a set of science and technology studies which will help lead to the final mission design some time in the 2003 period. This presentation first provides an overview of the notional GPM program and mission design, including its organizational and programmatic concepts, scientific agenda, expected instrument package, and basic flight architecture. Following this introduction, we focus specifically on the last topic, that being an analysis which leads to an optimal flight architecture dictated in part by science requirements but constrained by allowable orbital mechanics, instrument scan patterns, and antenna aperture properties. Because the optimal architecture involves an interplay between orbit mechanics and instrument specifications, it is important to recognize that in attempting to serve various scientific themes, the final optimal architecture will represent a compromise concerning dynamic range, spatial resolution, sampling interval, pointing, beam coincidence, and measurement uncertainty. Moreover, cost becomes a major factor in seeking the optimal architecture through the pathways of antenna and instrument scan designs, as well as propulsion requirements associated with the orbit heights of various "constellation" members. Although the results presented at the IGARSS-2001 meeting will likely not be the fully refined flight architecture specifications, they are expected to be nearly complete.

Smith, Eric A.↗

Space-based solar power conversion and delivery systems study

Even at reduced rates of growth, the demand for electric power is expected to more than triple between now and 1995, and to triple again over the period 1995-2020. Without the development of new power sources and advanced transmission technologies, it may not be possible to supply electric energy at prices that are conductive to generalized economic welfare. Solar power is renewable and its conversion and transmission from space may be advantageous. The goal of this study is to assess the economic merit of space-based photovoltaic systems for power generation and a power relay satellite for power transmission. In this study, satellite solar power generation and transmission systems, as represented by current configurations of the Satellite Solar Station (SSPS) and the Power Relay Satellite (PRS), are compared with current and future terrestrial power generation and transmission systems to determine their technical and economic suitability for meeting power demands in the period of 1990 and beyond while meeting ever-increasing environmental and social constraints.

Source record↗

Analysis of a generalized dual reflector antenna system using physical optics

Reflector antennas are widely used in communication satellite systems because they provide high gain at low cost. Offset-fed single paraboloids and dual reflector offset Cassegrain and Gregorian antennas with multiple focal region feeds provide a simple, blockage-free means of forming multiple, shaped, and isolated beams with low sidelobes. Such antennas are applicable to communications satellite frequency reuse systems and earth stations requiring access to several satellites. While the single offset paraboloid has been the most extensively used configuration for the satellite multiple-beam antenna, the trend toward large apertures requiring minimum scanned beam degradation over the field of view 18 degrees for full earth coverage from geostationary orbit may lead to impractically long focal length and large feed arrays. Dual reflector antennas offer packaging advantages and more degrees of design freedom to improve beam scanning and cross-polarization properties. The Cassegrain and Gregorian antennas are the most commonly used dual reflector antennas. A computer program for calculating the secondary pattern and directivity of a generalized dual reflector antenna system was developed and implemented at LeRC. The theoretical foundation for this program is based on the use of physical optics methodology for describing the induced currents on the sub-reflector and main reflector. The resulting induced currents on the main reflector are integrated to obtain the antenna far-zone electric fields. The computer program is verified with other physical optics programs and with measured antenna patterns. The comparison shows good agreement in far-field sidelobe reproduction and directivity.

Acosta, Roberto J.↗

The Astromag superconducting magnet facility configured for a free-flying satellite

The magnet parameters of a free-flying version of Astromag and the parameters of the space cryogenic system for the magnet are presented. Consideration is given to the free-flyer version of the Astromag magnet. The diameter of the magnet, its cryostat, the satellite and the two instruments is limited by the 4.27-m shroud diameter of the Atlas IIa. The magnet coil must use a stable reliable superconductor which can carry the full magnet current at 4.2 K at a peak induction in the coil of 7.5 T. The magnet must operate in the persistent mode. The changes in the overall design and operating requirements for the free-flying-design Astromag suggest that the coils, the cryogenic system, and the charging system can be simplified without a loss of required magnet function. Attention is given to switches, trim coils, and plumbing in the low field region between the coils; the magnet charging system and the quench protection system; and cooled helium supply to the magnet gas-cooled electrical leads.

Green, M. A.↗

Importance of Radiative Transfer Models in Atmospheric Remote Sensing

Radiative transfer models (RTMs) play a significant role in the development of satellite instruments for remote sensing applications. These models simulate electromagnetic radiation's propagation through the atmosphere, providing valuable insights into atmosphere-radiation interactions. RTMs facilitate the optimization of satellite instrument designs, ensuring their ability to measure targeted atmospheric and surface properties accurately. Moreover, they aid in simulating instrument’s measurements under various atmospheric conditions, enabling calibration and validation processes to enhance data quality and reliability. RTMs are extensively used in the Observing System Simulation Experiments (OSSE), to generate synthetic observations. By incorporating RTMs into OSSE, we can assess the potential impact of future satellite missions, sensor configurations, and data assimilation techniques. This approach allows for the optimization of satellite instruments and constellations and the evaluation of their influence on weather forecasting, climate monitoring, and other Earth science applications. Another crucial application area of RT models is data assimilation, where they play a fundamental role in combining satellite observations with numerical models to improve atmospheric and environmental predictions. RTMs provide the link between observed radiances and atmospheric parameters, enhancing the accuracy of numerical models and generating more reliable forecasts for weather events, air quality assessments, and climate projections. Moreover, adapting RT models to capture the intricate radiation interactions within the Planetary Boundary Layer will significantly contribute to improving weather forecasting and climate change projections. Current community radiative transfer (RT) models are primarily developed and optimized for operational data assimilation of satellite observations. These models excel at assimilating satellite data into numerical weather prediction models to improve forecast accuracy. However, their focus on data assimilation limits their suitability for other important applications, such as satellite instrument development, OSSE, and Planetary Boundary Layer (PBL) studies. Moreover, for PBL studies, RT models need to be adapted to capture the intricate radiation interactions within this crucial atmospheric layer. Developing RT models that can represent the PBL's unique characteristics, such as surface interactions, will contribute significantly to understanding and predicting weather phenomena, air quality, and climate dynamics. This abstract provides a comprehensive overview of the current status of RT models and highlights their limitations concerning satellite instrument development, OSSE, and PBL studies. Addressing these shortcomings requires concerted efforts to enhance RT models' capabilities and expand their applications beyond data assimilation. By investing in research and development to improve these

Isaac Moradi↗

The role of SRMS in satellite servicing

The standard configuration of the shuttle remote manipulator system (RMS) is reviewed and the role of the RMS in satellite servicing is discussed. The RMS tasks include payload deployment, retrieval/berthing, large spacecraft assembly/module exchange, assist astronaut extravehicular servicing, and remote servicing. The potential growth of the RMS to increase its utilization and improve its performance is also addressed. The projected concepts include dual arm operation, a remote mounted RMS, and special purpose end effectors. In particular, a universal service tool system with both remote and manual modes of operation is described.

Fuller, R. B.↗

Earth Observatory Satellite system definition study. Report no. 3: Design/cost tradeoff studies

The key issues in the Earth Observatory Satellite (EOS) program which are subject to configuration study and tradeoff are identified. The issue of a combined operational and research and development program is considered. It is stated that cost and spacecraft weight are the key design variables and design options are proposed in terms of these parameters. A cost analysis of the EOS program is provided. Diagrams of the satellite configuration and subsystem components are included.

Source record↗

Development concerns for satellite-based air traffic control surveillance systems

Preliminary results of an investigation directed toward the configuration of a practical system design which can form the baseline for assessing the applications and value of a satellite based air traffic surveillance system for future use in the National Airspace System (NAS) are described. This work initially studied the characteristics and capabilities of a satellite configuration which would operate compatibly with the signal structure and avionics of the next generation air traffic control secondary surveillance radar system, the Mode S system. A compatible satellite surveillance system concept is described and an analysis is presented of the link budgets for the various transmission paths. From this, the satellite characteristics are established involving a large multiple feed L band antenna of approximately 50 meter aperture dimension. Trade offs involved in several of the alternative large aperture antennas considered are presented as well as the influence of various antenna configurations on the performance capabilities of the surveillance system. The features and limitations of the use of large aperture antenna systems for air traffic surveillance are discussed. Tentative results of this continuing effort are summarized with a brief description of follow on investigations involving other space based antenna systems concepts.

Mcdonald, K. D.↗

Orbital resonances, unusual configurations and exotic rotation states among planetary satellites

Several examples of satellite dynamics are presented where significant progress has been made in understanding a complex problem, where a long-standing problem has finally been solved, where newly discovered configurations have motivated novel descriptions or where an entirely new phenomenon has been revealed. The origin of orbital resonances in satellites and the solution of the problem of the origin and evolution of the three body Laplace resonance among the Galilean satellites are among the topics discussed.

Peale, S. J.↗

An analysis of satellite state vector observability using SST tracking data

Observability of satellite state vectors, using only SST tracking data was investigated by covariance analysis under a variety of satellite and station configurations. These results indicate very precarious observability in most short arc cases. The consequences of this are large variances on many state components, such as the downrange component of the relay satellite position. To illustrate the impact of observability problems, an example is given of two distinct satellite orbit pairs generating essentially the same data arc. The physical bases for unobservability are outlined and related to proposed TDRSS configurations. Results are relevant to any mission depending upon TDRSS to determine satellite state. The required mathematical analysis and the software used is described.

Englar, T. S., Jr.↗

System and Apparatus for Deploying a Satellite

A frictionless satellite constraint system is provided. The constraint system includes at least one clamp bar configured to restrain a satellite within the constraint system in an axial direction. The constraint system also includes a plurality of pins configured to restrain the satellite within the constraint system in a lateral direction.

Santos, Luis H.↗

Evaluating Multi-Sensor Agreement of Satellite Particulate Backscatter Retrievals by Validatin Against In-Water Measurement

Biogeochemical-Argo profiling floats have increased in situ data density across multiple water types, creating new opportunities to evaluate satellite instrument-to-instrument differences in particulate back scattering coefficient(bbp). Retrievals of bbp from identical GIOP algorithm configurations differ between satellite instruments due to1)algorithm input differences and 2) radiometric differences. 3.Instrument-to-instrument differences must be considered before creating a merged timeseries of satellite ocean color products,in order to distinguish real, environmental contributions from spurious algorithmic or radiometricones

Scott, Joel P.↗