Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SAPPHIRE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Growth of crystalline ZnO films on the nitridated (0001) sapphire surface

The surface morphology and structure of (0001) sapphire substrates subjected to thermochemical nitridation in a mixture of N{sub 2}, CO, and H{sub 2} gases are investigated by electron and probe microscopy and X-ray and electron diffraction. It is shown that an aluminum nitride layer is formed on the substrate surface and heteroepitaxial ZnO films deposited onto such substrates by magnetron sputtering have a higher quality when compared with films grown on sapphire.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ga{sub 2}O{sub 3}–In{sub 2}O{sub 3} thin films on sapphire substrates: Synthesis and ultraviolet photoconductivity

The structure and electrical and optical properties of β-Ga{sub 2}O{sub 3}–In{sub 2}O{sub 3} thin films on sapphire substrates with different orientations have been investigated. The samples have been prepared by annealing of gallium–indium metallic films on sapphire substrates in air at different gallium-to-indium ratios in the initial mixture. The photoconductivity of these structures in the solar-blind ultraviolet spectral region has been examined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modification of the structural lattice parameters and electron spectra of n-GaAs films on sapphire on irradiation with reactor neutrons

Changes in the structural parameters of epitaxial GaN films on sapphire (n-GaN/Al{sub 2}O{sub 3}(0001)) induced by irradiation with reactor neutrons with integrated fluences up to 7.25 Multiplication-Sign 10{sup 19} fn cm{sup -2} ({phi}{sub fn}/{phi}{sub tn} Almost-Equal-To 1) and subsequent isochronal annealing at temperatures up to 1000 Degree-Sign C are studied. Measurements of the lattice parameters a and c of the irradiated n-GaN films show that the parameter c increases by 0.38% and the parameter a remains almost unchanged. From theoretical estimations, it follows that, in the irradiated n-GaN film, the elastic tensile stress along the c axis is as high as {approx}1.5 GPa, whereas the compression stress in the basal plane of the unit cell is about -0.5 GPa. The tension of the irradiated GaN film along the hexagonal axis induces a decrease in the band gap E{sub g} by 37 meV and a lowering of the charge neutrality level by 22 meV with respect to the corresponding parameters in the initial GaN film on sapphire. The parameter c changed by irradiation with reactor neutrons by {Delta}c can be recovered by annealing in the temperature range 100-1000 Degree-Sign C, with the basic stage of annealing at about 400 Degree-Sign C.

36 MATERIALS SCIENCE↗

Analysis of the growth dependences of silicon-on-sapphire heteroepitaxy

The formation of nanoislands of two forms (dome-shaped and a truncated dome) is experimentally found during the initial stage of silicon-on-sapphire heteroepitaxy. Atomic-resolution images of the silicon islands on sapphire are obtained by transmission electron microscopy. A model is proposed to explain the instability of the shape of islands and its transition from isotropic to anisotropic and to describe the evolution of average island sizes during growth. It is shown that the height dependence of the island diameter is approximately linear; however, for large island sizes there is a significant discrepancy with the experimental data due to island coalescence, which is disregarded in the model.

36 MATERIALS SCIENCE↗

Surface photovoltage method for the quality control of silicon epitaxial layers on sapphire

The surface photovoltage method is used to study “silicon-on-sapphire” epitaxial layers with a thickness of 0.3–0.6 μm, which are used to fabricate p-channel MOS (metal—oxide-semiconductor) transistors with improved radiation hardness. It is shown that the manner in which the photoconductivity of the epitaxial layer decays after the end of a light pulse generated by a light-emitting diode (wavelength ∼400 nm) strongly depends on the density of structural defects in the bulk of the structure. This enables control over how a “silicon-on-sapphire” structure is formed to provide the manufacturing of MOS structures with optimal operating characteristics.

36 MATERIALS SCIENCE↗

Site-Controlled Growth of GaN Nanorods with Inserted InGaN Quantum Wells on μ-Cone Patterned Sapphire Substrates by Plasma-Assisted MBE

We report on a new approach to fabricate regular arrays of GaN nanorods (NRs) with InGaN QWs by plasma-assisted molecular-beam epitaxy (PA MBE) on micro-cone patterned sapphire substrates (μ-CPSSs). A two-stage PA MBE fabrication process of GaN NRs has been developed, starting with a high temperature nucleation layer growth at metal-rich conditions to aggregate selectively GaN nucleus on c-oriented areas of the μ-CPSSs and followed by growth of 1-μm-thick GaN NRs at strongly nitrogen-rich conditions exactly on the cone tips. These results are explained by energetically favorable GaN growth on the (000-) oriented sapphire surface. Both micro-photoluminescence and micro-cathodoluminescence confirm the formation of regular array of optically and spectrally isolated NRs without usage of any nanolithography.

36 MATERIALS SCIENCE↗

Bonding Energy of Silicon and Sapphire Wafers at Elevated Temperatures of Joining

The hydrophilicity of surfaces and the bonding energy of silicon and sapphire wafers at the temperature of joining 50°C are studied. It is established that heating of the Si and Al{sub 2}O{sub 3} wafers to 50°C is accompanied by an increase in the degree of hydrophilicity of the wafer surfaces. The effect is attributed to improvement in the surface purity due to the desorption of impurity atoms into vacuum and to an increase in the density of dangling bonds. It is found that the bonding energy of silicon and sapphire wafers joined at a temperature of 50°C and upon further heating in the range 100–250°C is higher compared to the bonding energy of wafers joined at room temperature. The activation energy of the growth of the bonding energy is determined. It is found that this activation energy is 0.57 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microwave properties of high-temperature Josephson contacts on a sapphire bicrystal substrate

HTS bicrystal junctions up to 50 μm wide on sapphire substrates have been studied. The dependences of the critical current on the temperature and external magnetic field of these contacts have been measured. The irradiation of the Josephson junction on a sapphire substrate at the frequency of 73 GHz at the temperature of 77 K resulted in the appearance of Shapiro steps in the current–voltage characteristic (IVC) at the voltage of 150 μV. The possibility of using such contacts in voltage standards at the temperature of 77 K in the ranges of microwave and terahertz frequencies has been analyzed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Initial Stages of Growth of Barium Zirconate Titanate and Barium Stannate Titanate Films on Single-Crystal Sapphire and Silicon Carbide

The initial stages of growth of barium zirconate titanate and barium stannate titanate ferroelectric films on single-crystal sapphire and silicon carbide are studied for the first time. The choice of substrates is dictated by the possibility of using such structures in ultra-high frequency devices. The growth of discontinuous BaZr{sub x}Ti{sub 1–x}O{sub 3} films is found to be mediated by the gas phase mass transport mechanism in the studied temperature range. For deposition of BaSn{sub x}Ti{sub 1–x}O{sub 3} films, the mechanism of mass transport switches at ~800°C from surface diffusion to gas phase diffusion; also, the films deposited on sapphire and silicon carbide have considerably different elemental composition. The formation of an intermediate SiO{sub 2} layer is noted on silicon carbide during the growth of oxide films on this substrate, its thickness depending on the deposition temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Studying the Characteristics of Transistors Based on Gallium Nitride Heterostructures Grown by Ammonia Molecular Beam Epitaxy on Sapphire and Silicon Substrates

Abstracts: Ammonia molecular-beam epitaxy has been used to grow gallium nitride (GaN) transistor heterostructures on sapphire and silicon substrates. GaN transistors with a 1.2-mm periphery fabricated on substrates of both types exhibited similar high static characteristics: saturation current density above 0.75 A/mm, transconductance above 300 mS/mm, and breakdown voltage above 120 V. Measurements of the small-signal parameters showed that transistors based on silicon substrates possessed high gain in a frequency range up to 5 GHz; the specific output power at 1 GHz amounted to 5 W/mm for transistors on sapphire substrate and 2 W/mm for transistors on silicon substrate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Application of Sapphire-Fiber-Bragg-Grating-Based Multi-Point Temperature Sensor in Boilers at a Commercial Power Plant

Readily available temperature sensing in boilers is necessary to improve efficiencies, minimize downtime, and reduce toxic emissions for a power plant. The current techniques are typically deployed as a single-point measurement and are primarily used for detection and prevention of catastrophic events due to the harsh environment. In this work, a multi-point temperature sensor based on wavelength-multiplexed sapphire fiber Bragg gratings (SFBGs) were fabricated via the point-by-point method with a femtosecond laser. The sensor was packaged and calibrated in the lab, including thermally equilibrating at 1200 °C, followed by a 110-h, 1000 °C stability test. After laboratory testing, the sensor system was deployed in both a commercial coal-fired and a gas-fired boiler for 42 days and 48 days, respectively. The performance of the sensor was consistent during the entire test duration, over the course of which it measured temperatures up to 950 °C (with some excursions over 1000 °C), showing the survivability of the sensor in a field environment. The sensor has a demonstrated measurement range from room temperature to 1200 °C, but the maximum temperature limit is expected to be up to 1900 °C, based on previous work with other sapphire based temperature sensors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Progress on 10 Kelvin cryo-cooled sapphire oscillator

We present recent progress on the 10 Kelvin Cryocooled Sapphire Oscillator (10K CSO). Included are incorporation of a new pulse tube cryocooler, cryocooler vibration comparisons between G-M and pulse-tube types, phase noise, and frequency stability tests. For the advantage of a single stage pulse tube cryocooler, we also present results for a 40K Compensated Sapphire Oscillator (40K CSO).

sapphire↗

Progress Report for a New Cryogenic Sapphire Oscillator

We present design progress and subsystem test results for a new short-term frequency standard, the Voltage Controlled Sapphire Oscillator (VCSO). Included are sapphire resonator and coupling design, cryocooler environmental sensitivity tests, Q measurement results, and turnover temperature results. A previous report presented history of the design related to resonator frequency and frequency compensation [1]. Performance goals are a frequency stability of 1x10(exp -14) (1 second less than or equal to (tau) less than or equal to 100 seconds) and two years or more continuous operation. Long-term operation and small size are facilitated by use of a small Stirling cryo-cooler (160W wall power) with an expected 5 year life.

oscillator↗

A Brief History of the Curation of Genesis Sapphire Solar Wind Collectors

Commercial, high purity semiconductor sapphire (AKA corundum) wafers were used as one of the passive solar wind collector materials on the Genesis sample return mission because it exhibited lower diffusion rates for alkali elements than silicon and had sufficiently low alkali blanks. The 20 whole hexagons of sapphire flown on the Genesis spacecraft were distributed among the solar wind (SW) regimes as follows: 8 bulk solar wind (plus two half hexagons), 4 coronal mass ejection (CME), 4 coronal hole (CH), and 4 interstream (IS). Excellent overviews: a) collector material properties presented in [1] and b) solar wind environment experienced by collectors presented in [2].

Genesis sample return mission↗

The Development of a Sapphire Cell for Neutron Scattering Experiments at High Temperature and High Pressure

Abstract. A high pressure, high temperature sapphire cell has been designed to provide usersat the Spallation Neutron Source with the ability to perform in-situ supercritical bulk waterstudies. The design criteria for the cell required the achievement of a maximum pressure of150 MPa at the maximum temperature of 500°C. Other conceptual constraints, such as a 360°viewing angle and top loading integration further complicated and limited available cellmodels. The sapphire cell was tested and modified due to pre-mature failure. Due toconvenient geometry and ease of operation, interest in the cell for more moderate operatingrequirements has increased.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High Fluence Active Irradiation and Combined Effects Testing of Sapphire Optical Fiber Distributed Temperature Sensors

Investigate the in-pile performance of sapphire optical fiber temperature sensors and to develop clad sapphire optical fibers for in-pile instrumentation. Evaluate the distributed sensing performance of the sensors through optical backscatter reflectometry under combined radiation and temperature effects, and high fluence.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Role of V-defect density on the performance of III-nitride green LEDs on sapphire substrates

In this paper, we experimentally investigated the role of V-defect density on the performance of green III-nitride LEDs grown on sapphire substrates by metalorganic chemical vapor deposition. We systematically varied the threading dislocation (TD) density from 4 × 10 8 to 1 × 10 9 cm -2 by changing the V/III ratio during initial high temperature GaN growth. A 30-period InGaN/GaN superlattice promoted V-defect formation and growth at TDs, where the density of V-defects was correlated to the TD density. By interrupting the LED growth and examining the surface of the active region, we quantified the average size and density of V-defects. In a series of LEDs, we measured a systematic decrease in forward voltage (V F ) with V-defect density. At a V-defect density of 5.0 × 10 8 cm -2 and TD density of 1 × 10 9 cm -2 , green LED devices were demonstrated with λ = 523 nm and V F = 2.94 V at 20 A cm -2 . These results highlight the potential of using V-defect engineering to achieve low V F long wavelength LEDs on sapphire substrates, where opening of remaining threading dislocations into V-defects presents an opportunity for further V F reduction.

36 MATERIALS SCIENCE↗