SEARCH · Engineering Papers

Results for “Resistance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Kinetic simulations of anomalous resistivity in high-temperature current carrying plasmas

Anomalous resistivity caused by lower hybrid drift instabilities (LHDIs) has been extensively studied in the literature, and has been invoked to explain the rates of magnetic diffusion and plasma profile evolution in the low-density plasma periphery of theta and screw pinch plasmas. In this article, we present a fully kinetic simulation study of LHDIs with a realistic mass ratio using the particle-in-cell code Chicago over a large range of drift speeds, 0.5 < v$^{2}_{di}$/v$^{2}_{ti}$ < 14.5, plasma β, β ≥ 2×10 –5 , and temperature ratios, 0.1 < T e /T i < 10. The resistivity quantified from the simulations is compared with the analytic estimates from the literature and a generalized resistivity expression is presented, which can be applied over the entire range of plasma environments that were simulated in this study. This expression uses the amplitude of the LHDI fluctuations resulting from instability saturation by electron resonance broadening rather than plateau formation, current relaxation, or ion trapping. The generalized resistivity expression is appropriate for full-scale fluid simulations that encounter a large range of plasma conditions, and has better agreement with the resistivity quantified from kinetic simulations than previous expressions in the literature, particularly at low plasma β. Anomalous resistivity has also been considered as an explanation of the rapid magnetic field dissipation during magnetic reconnection events at large plasma β. At a large β, the magnetic field fluctuations of LHDIs can dominate the electrostatic fluctuations and this article investigates enhanced collisionality due to the nonlinear magnetic force, δJ×δB/c.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

An experimental study to investigate magnetic field and winding force-dependent contact resistance of NI REBCO coil

Abstract This paper reports the magnetic field and winding force-dependent contact resistance, also known as characteristic resistance, of no-insulation (NI) REBCO coil. Three NI coils were wound with different winding forces ( < 1 kgf, 3 kgf, and 5 kgf) using the same REBCO-coated conductor, and they were tested at 4.2 K in a background field of 0, 5, 10, and 14 T. The contact resistance of each coil is measured at each field. As a result of the measurements, we draw two conclusions. First, a quadratic function for magnetic field intensity reasonably reproduces the measurement results of each NI test coil’s magnetic field-dependent contact resistance, where the practical fit function’s coefficients are determined depending on the winding force. Second, the contact resistance of each coil is partially inconsistent with the magnetoresistance of the electroplated material, i.e. copper, of the REBCO-coated conductor. This paper will present the measurement results in detail, discuss them with Kohler’s rule, and formulate the contact resistance using winding force and magnetic field terms.

Bang, Jeseok (ORCID:0000000247616334)↗

DOE OSTI2023

Prevalence of erythromycin-resistant emm92 -type invasive group A streptococcal infections among injection drug users in West Virginia, United States, 2021–23

Abstract Background Increasing incidence of invasive group A Streptococcus (iGAS) disease has been reported in Europe and the USA over the past several years. Coupled with this are observations of higher rates of resistance to erythromycin and clindamycin. Objectives To characterize iGAS and pharyngitis isolates from West Virginia (WV), a US state outside of the national Active Bacteria Core surveillance purview, where risk factors associated with iGAS infections are prevalent. Methods Seventy-seven invasive group A Streptococcus isolates were collected from 67 unique patients at the J.W. Ruby Memorial Hospital Clinical Microbiology Laboratory in WV from 2021 to 2023. Invasive isolates and 20 unique pharyngitis isolates were tested for clindamycin and erythromycin susceptibility in the clinical laboratory. Patient demographic and clinical information was retrieved from patient electronic health records. Isolates were further characterized based on emm subtype and detection of MLSB resistance determinants. Results Twenty-six (39%) isolates were of a single emm92 type. All emm92 isolates were uniformly erythromycin/clindamycin resistant with inducible or constitutive MLSB resistance imparted by the plasmid-borne erm(T) gene. The majority of emm92 infections were associated with adult patients who reported IV drug use, whereas no pharyngitis infections were caused by an emm92 strain. Overall, 51 (76%) of the 67 iGAS isolates were determined to carry MLSB resistance. Conclusions Isolates of emm92 type (clonal subtype emm92.0) were associated with iGAS infections in adult IV drug users, but not with paediatric pharyngitis, and were uniformly resistant to erythromycin and clindamycin.

Powell, Lillie M.↗

DOE OSTI2021

Metabolic patterns in Septoria canker resistant and susceptible Populus trichocarpa genotypes 24 hours post-inoculation

Sphaerulina musiva is an economically and ecologically important fungal pathogen that causes Septoria stem canker and leaf spot disease of Populus species. Here, to bridge the gap between genetic markers and structural barriers previously found to be linked to Septoria (Sphaerulina musiva) canker disease resistance in poplar, we employed hydrophilic interaction liquid chromatography (HILIC) and tandem mass spectrometry (MS/MS) to identify and quantify metabolites involved with signaling and cell wall re-modelling. Fluctuations in signaling molecules, organic acids, amino acids, sterols, phenolics, and saccharides in resistant and susceptible Populus trichocarpa inoculated with Sphaerulina musiva, were observed. The patterns of 222 metabolites in the resistant host implicates systemic acquired resistance (SAR), cell wall apposition, and lignin deposition as modes of resistance to this hemibiotrophic pathogen. This pattern is consistent with the expected response to the biotrophic phase of S. musiva colonization during the first 24 hours post-inoculation. The fungal pathogen metabolized key regulatory signals of SAR, other phenolics, and precursors of lignin biosynthesis which were depleted in the susceptible host. This is the first study to characterize metabolites associated with the response to initial colonization by S. musiva between resistant and susceptible hosts.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2025

Surface conduction and reduced electrical resistivity in ultrathin noncrystalline NbP semimetal

The electrical resistivity of conventional metals such as copper is known to increase in thin films as a result of electron-surface scattering, thus limiting the performance of metals in nanoscale electronics. Here, in this study, we find an unusual reduction of resistivity with decreasing film thickness in niobium phosphide (NbP) semimetal deposited at relatively low temperatures of 400°C. In films thinner than 5 nanometers, the room temperature resistivity (~34 microhm centimeters for 1.5-nanometer-thick NbP) is up to six times lower than the resistivity of our bulk NbP films, and lower than conventional metals at similar thickness (typically about 100 microhm centimeters). The NbP films are not crystalline but display local nanocrystalline, short-range order within an amorphous matrix. Our analysis suggests that the lower effective resistivity is caused by conduction through surface channels, together with high surface carrier density and sufficiently good mobility as the film thickness is reduced. These results and the fundamental insights obtained here could enable ultrathin, low-resistivity wires for nanoelectronics beyond the limitations of conventional metals.

42 ENGINEERING↗

DOE OSTI2025

Structural basis for varying drug resistance of SARS-CoV-2 M pro E166 variants

ABSTRACT Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) main protease (M pro ) has an essential role in the virus lifecycle and, accordingly, it is a target for antiviral drugs. Multiple studies have identified an M pro mutation (E166V) that confers strong resistance to clinically relevant inhibitors, including nirmatrelvir, but the underlying mechanism is not fully understood. Here, we report on crystal structures of SARS-CoV-2 M pro E166V in complex with nirmatrelvir, ensitrelvir, and bofutrelvir. The structures suggest that resistance is caused in part by the loss of a direct hydrogen bond and also, especially for nirmatrelvir, by a steric clash with the substituted valine residue. In comparison, the binding of bofutrelvir shows greater flexibility, which may help alleviate this steric effect and allow bofutrelvir to fit the mutant active site despite the loss of a direct polar contact. Thermal stability analyses also corroborate E166V most severely affecting the binding of nirmatrelvir and, to lesser and different extents, ensitrelvir and bofutrelvir. We further show that E166I causes even more severe nirmatrelvir resistance, whereas E166A and E166L have much milder effects. These studies shed light on the molecular mechanisms of a key M pro drug resistance mutation and may help inform the design of next-generation inhibitors. IMPORTANCE Using a combination of high-resolution X-ray crystallographic and biochemical analyses, we reveal the molecular mechanisms by which a mutation in the severe acute respiratory syndrome coronavirus 2 main protease (M pro ) confers strong resistance against clinically relevant antiviral drugs that inhibit M pro activity. The results presented here may help inform the design of next-generation inhibitors to combat the problem of therapy resistance.

Microbiology↗

DOE OSTI2023

Virulence factors and antimicrobial resistance profiles of Campylobacter isolates recovered from consecutively reused broiler litter

ABSTRACT Campylobacterinfections are a leading cause of bacterial diarrhea in humans globally. Infections are due to consumption of contaminated food products and are highly associated with chicken meat, with chickens being an important reservoir forCampylobacter. Here, we characterized the genetic diversity ofCampylobacter jejuni(C. jejuni) andCampylobacter coli(C. coli) detected in broiler chicken litter over three consecutive flocks and determined their antimicrobial resistance (ARM) and virulence factor (VF) profiles.Campylobacterwas detected in 9.38% (27/288) of litter samples collected. Antimicrobial susceptibility testing and whole genome sequencing were performed onC. jejuni(n= 39) andC. coli(n= 5) isolates.Campylobactervirulence factors differed within and across broiler houses but were explained by the broiler flock cohort raised on litter,Campylobacterspecies andCampylobactermultilocus sequence type (MLST). Virulence factors involved in the ability to invade and colonize host tissues and evade host defenses were present inC. jejuniisolates (ST-464) from flock cohorts 1 and 2 but absent inC. jejuniisolates (ST-48) from flock cohort 3.C. jejuniisolates from house three harbored a significantly higher proportion of virulence genes with functions related to glycosylation and immune evasion thanC. jejuniisolates from houses 1 and 2 (P< 0.01). AllC. jejuniisolates were susceptible to all antibiotics tested whileC. coli(n= 4) were resistant to tetracycline and harbored the tetracycline resistant ribosomal protection protein (TetO). Our results suggest that house environment and broiler management practices imposed selective pressures on virulence factors and antimicrobial resistance genes ofCampylobacter. IMPORTANCE Campylobacteris a leading cause of foodborne illness in the United States due to consumption of contaminated or mishandled food products, often associated with chicken meat.Campylobacteris common in the microbiota of avian and mammalian gut; however, acquisition of antimicrobial resistance genes (ARGs) and virulence factors (VFs) may result in strains that pose significant threat to public health. Although there are studies investigating the genetic diversity ofCampylobacterstrains isolated from post-harvest chicken samples, there are limited data on the genome characteristics of isolates recovered from preharvest broiler production. Here, we show thatCampylobacter jejuniandCampylobacter colidiffer in their carriage of antimicrobial resistance and virulence factors may also differ in their ability to persist in litter during consecutive grow-out of broiler flocks. We found that presence/absence of virulence factors needed for evasion of host defense mechanisms and gut colonization played an integral role in differentiatingCampylobacterstrains.

Microbiology↗

DOE OSTI2024

Modeling resistance to the broadly neutralizing antibody PGT121 in people living with HIV-1

PGT121 is a broadly neutralizing antibody in clinical development for the treatment and prevention of HIV-1 infection via passive administration. PGT121 targets the HIV-1 V3-glycan and demonstrated potent antiviral activity in a phase I clinical trial. Resistance to PGT121 monotherapy rapidly occurred in the majority of participants in this trial with the sampled rebound viruses being entirely resistant to PGT121 mediated neutralization. However, two individuals experienced long-term ART-free viral suppression following antibody infusion and retained sensitivity to PGT121 upon viral rebound. Here, we develop mathematical models of the HIV-1 dynamics during this phase I clinical trial. We utilize these models to understand the dynamics leading to PGT121 resistance and to identify the mechanisms driving the observed long-term viral control. Our modeling highlights the importance of the relative fitness difference between PGT121 sensitive and resistant subpopulations prior to treatment. Specifically, by fitting our models to data, we identify the treatment-induced competitive advantage of previously existing or newly generated resistant population as a primary driver of resistance. Finally, our modeling emphasizes the high neutralization ability of PGT121 in both participants who exhibited long-term viral control.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2022

Evaluation of a parasite-density based pooled targeted amplicon deep sequencing (TADS) method for molecular surveillance of Plasmodium falciparum drug resistance genes in Haiti

Sequencing large numbers of individual samples is often needed for countrywide antimalarial drug resistance surveillance. Pooling DNA from several individual samples is an alternative cost and time saving approach for providing allele frequency (AF) estimates at a population level. Using 100 individual patient DNA samples of dried blood spots from a 2017 nationwide drug resistance surveillance study in Haiti, we compared codon coverage of drug resistance-conferring mutations in four Plasmodium falciparum genes ( crt , dhps , dhfr , and mdr1 ), for the same deep sequenced samples run individually and pooled. Samples with similar real-time PCR cycle threshold (Ct) values (+/- 1.0 Ct value) were combined with ten samples per pool. The sequencing success for samples in pools were higher at a lower parasite density than the individual samples sequence method. The median codon coverage for drug resistance-associated mutations in all four genes were greater than 3-fold higher in the pooled samples than in individual samples. The overall codon coverage distribution for pooled samples was wider than the individual samples. The sample pools with < 40 parasites/μL blood showed more discordance in AF calls for dhfr and mdr1 between the individual and pooled samples. This discordance in AF estimation may be due to low amounts of parasite DNA, which could lead to variable PCR amplification efficiencies. Grouping samples with an estimated ≥ 40 parasites/μL blood prior to pooling and deep sequencing yielded the expected population level AF. Pooling DNA samples based on estimates of > 40 parasites/μL prior to deep sequencing can be used for rapid genotyping of a large number of samples for these four genes and possibly other drug resistant markers in population-based studies. As Haiti is a low malaria transmission country with very few mixed infections and continued chloroquine sensitivity, the pooled sequencing approach can be used for routine national molecular surveillance of resistant parasites.

Louha, Swarnali (ORCID:0000000207778507)↗

DOE OSTI2022

GIF Supercritical Water Cooled Reactor: Proliferation Resistance and Physical Protection White Paper

This report is part of a series of six white papers, prepared jointly by the Proliferation Resistance and Physical Protection Working Group (PRPPWG) and the six System Steering Committees (SSCs) and provisional System Steering Committees (pSSCs). This publication is an update to a similar series published in 2011 presenting the status of Proliferation Resistance & Physical Protection (PR&PP) characteristics for each of the six systems selected by the Generation IV International Forum (GIF) for further research and development, namely: the Sodium-cooled fast Reactor (SFR), the Very high temperature reactor (VHTR), the gas-cooled fast reactor (GFR), the Molten salt reactor (MSR) and the Supercritical water–cooled reactor (SCWR). This white paper represents the status of Proliferation Resistance and Physical Protection (PR&PP) characteristics for the Supercritical Water-cooled Fast reactor (SCFR) reference designs selected by the Generation IV International Forum (GIF) SCWR System Steering Committee (SSC). The intent is to generate preliminary information about the PR&PP features of the SCWR reactor technology and to provide insights for optimizing their PR&PP performance for the benefit of SCWR system designers. It updates the SCWR analysis published in the 2011 report “Proliferation Resistance and Physical Protection of the Six Generation IV Nuclear Energy Systems”, prepared Jointly by the Proliferation Resistance and Physical Protection Working Group (PRPPWG) and the System Steering Committees and provisional System Steering Committees of the Generation IV International Forum, taking into account the evolution of both the systems, the GIF R&D activities, and an increased understanding of the PR&PP features. The white paper, prepared jointly by the GIF PRPPWG and the GIF SCWR SSC, follows the highlevel paradigm of the GIF PR&PP Evaluation Methodology to investigate the PR&PP features of the eight proposed GIF SCWR designs. Two small modular reactors, the Canadian SSR and the Canada/China/Europe ECC-SMART are also mentioned. An overview of the fuel cycles for the GIF designs are provided. For PR, the document analyses and discusses the proliferation resistance aspects in terms of robustness against State-based threats associated with diversion of materials, misuse of facilities, breakout scenarios, and production in clandestine facilities. Similarly, for PP, the document discusses the robustness against theft of material and sabotage by non-State actors. The document follows a common template adopted by all the white papers in the updated series.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2022

GIF Very High Temperature Reactor: Proliferation Resistance and Physical Protection White Paper

This report is part of a series of six white papers, prepared jointly by the Proliferation Resistance and Physical Protection Working Group (PRPPWG) and the six System Steering Committees (SSCs) and provisional System Steering Committees (pSSCs). This publication is an update to a similar series published in 2011 presenting the status of Proliferation Resistance & Physical Protection (PR&PP) characteristics for each of the six systems selected by the Generation IV International Forum (GIF) for further research and development, namely: the Sodium-cooled fast Reactor (SFR), the Very high temperature reactor (VHTR), the gas-cooled fast reactor (GFR), the Molten salt reactor (MSR) and the Supercritical water–cooled reactor (SCWR). This white paper represents the status of Proliferation Resistance and Physical Protection (PR&PP) characteristics for the Very-High-Temperature Reactor (VHTR) reference designs selected by the Generation IV International Forum (GIF) VHTR System Steering Committee (SSC). The intent is to generate preliminary information about the PR&PP features of the VHTR reactor technology and to provide insights for optimizing their PR&PP performance for the benefit of VHTR system designers. It updates the VHTR analysis published in the 2011 report “Proliferation Resistance and Physical Protection of the Six Generation IV Nuclear Energy Systems”, prepared Jointly by the Proliferation Resistance and Physical Protection Working Group (PRPPWG) and the System Steering Committees and provisional System Steering Committees of the Generation IV International Forum, taking into account the evolution of both the systems, the GIF R&D activities, and an increased understanding of the PR&PP features. The white paper, prepared jointly by the GIF PRPPWG and the GIF VHTR SSC, follows the high-level paradigm of the GIF PR&PP Evaluation Methodology to investigate the key points of PR&PP features extracted from the reference designs of VHTRs under consideration in various countries. A major update from the 2011 report is an explicit distinction between prismatic block-type VHTRs and pebble-bed VHTRs. The white paper also provides an overview of the TRISO fuel and fuel cycle. For PR, the document analyses and discusses the proliferation resistance aspects in terms of robustness against State-based threats associated with diversion of materials, misuse of facilities, breakout scenarios, and production in clandestine facilities. Similarly, for PP, the document discusses the robustness against theft of material and sabotage by non-State actors. The document follows a common template adopted by all the white papers in the updated series.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2023

Genetics and Genomics of Pathogen Resistance in Switchgrass (Final Report)

This project was funded by DOE under Grant no. DE-SC0016108. Originally approved for the 2016-2019 period, two no-cost extensions were solicited and approved, which prolonged the lifespan through July 2021. This final report informs on the results obtained so far from the research implemented. The research hinged on integrating genomics (genomic selection, RNAseq, virus-plant interactions) with classical genetics (conventional breeding) to incorporate durable resistance to fungal (rust) and viral (mosaic) diseases in switchgrass (Panicum virgatum) populations being bred for bioenergy. Higher biomass yield, higher quality (low lignin content), and durable disease resistance are key features to make lignocellulosic switchgrass feedstocks economically competitive and sustainable. Genomic selection is being applied on three generations of a switchgrass population derived from crossing two ecotypes (Kanlow as lowland female and Summer as upland male) with differential performance in terms of biomass yield and quality, disease resistance, and winter survivability. Target populations were screened for rust and mosaic in field and/or lab and phenotyped for biomass yield and quality traits. Genetic analyses were applied across generations to capture the joint inheritance of the targeted traits and predict breeding values for parents and progeny with greater accuracy. Parental and a panel of different switchgrass populations were genotyped with the DArTseq technology to develop SNP (0, 1, 2) and in-silico (presence/absence) DArT markers. Rust inoculations techniques were developed and applied successfully on switchgrass. The original populations (Kanlow and Summer) were sequenced with RNAseq to capture the gene expression profiles across sequential time-points and appraise the basis of greater resistance in the Kanlow vs the Summer ecotype. Constructs of PMV and sPMV mosaic virus were assembled and tested first on proso millet to find the best protocol to use later on switchgrass. Results from the preliminary analyses indicate that 1) ample additive genetic variation is available for selection and improving this inter-ecotypic population for yield, quality, and disease traits, 2) significant gains are to be expected with the genetic correlations being favorable between yield and lignin content and between yield and disease ratings, 3) substantial differences exist in the genetic regions controlling rust resistance in the two ecotypes, 4) co-infection with PMV isolates from Nebraska and its satellite from Kansas elicit severe mosaic symptoms, and 5) two different genetic systems are responsible for imparting resistance to rust and virus in switchgrass.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2025

Machine learning reveals genes impacting oxidative stress resistance across yeasts

Reactive oxygen species (ROS) are highly reactive molecules encountered by yeasts during routine metabolism and during interactions with other organisms, including host infection. Here, we characterized the variation in resistance to ROS across the ancient yeast subphylum Saccharomycotina and used machine learning (ML) to identify gene families whose sizes were predictive of ROS resistance.

AI↗

DOE OSTI2022

Fast, Accurate, and Reliable Thermal Metrology to Assess the Thermal Resistivity on Small Samples of Thermal Insulation

Developing new insulation materials having a thermal resistivity greater than 69 m K/W (10 hr ft2 °F/Btu/inch) can be appealing for building envelope retrofit and construction of new buildings. Multiple institutions are involved in the development of innovative insulation materials with high thermal resistivity. However, these projects have struggled in the development of new materials due to the difficulty associated with the measurement of small sections of high thermal resistivity materials. As new materials are being developed, the size of each test specimen impacts the cost of development. Given the lack of a reliable method to measure the thermal resistivity on small samples of such materials, we evaluated experimental techniques that can be improved to satisfy the need for testing small sections of high thermal resistivity materials and developed standardized test methods to enable the rapid thermal evaluation of advanced insulation materials. This paper presents the study results and potential techniques for fast, accurate, and reliable effective thermal resistivity measurement on small samples of insulation materials.

Desjarlais, Andre Omer↗

DOE OSTI2022

Scalable Al 2 O 3 –TiO 2 Conductive Oxide Interfaces as Defect Reservoirs for Resistive Switching Devices

Abstract Resistive switching devices herald a transformative technology for memory and computation, offering considerable advantages in performance and energy efficiency. Here, a simple and scalable material system of conductive oxide interfaces is employed, and their unique properties are leveraged for a new type of resistive switching device. An Al 2 O 3 –TiO 2 ‐based valence‐change resistive switching device, where the conductive oxide interface serves both as the bottom electrode and as a reservoir of defects for switching, is demonstrated. The amorphous–polycrystalline Al 2 O 3 –TiO 2 conductive interface is obtained following the technological path of simplifying the fabrication of the 2D electron gases (2DEGs), making them scalable for practical mass integration. Physical analysis of the device chemistry and microstructure with comprehensive electrical analysis of its switching behavior and performance is combined. The origin of the resistive switching is pinpointed to the conductive oxide interface, which serves both as the bottom electrode and as a reservoir of oxygen vacancies. The latter plays a key role in valence‐change resistive switching devices. The new device, based on scalable and complementary metal–oxide–semiconductor (CMOS)‐technology‐compatible fabrication processes, opens new design spaces toward increased tunability and simplification of the device selection challenge.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Structure of VanS from vancomycin-resistant enterococci: A sensor kinase with weak ATP binding

The VanRS two-component system regulates the resistance phenotype of vancomycin-resistant enterococci. VanS is a sensor histidine kinase that responds to the presence of vancomycin by autophosphorylating and subsequently transferring the phosphoryl group to the response regulator, VanR. The phosphotransfer activates VanR as a transcription factor, which initiates the expression of resistance genes. Structural information about VanS proteins has remained elusive, hindering the molecular-level understanding of their function. Here, we present X-ray crystal structures for the catalytic and ATP-binding (CA) domains of two VanS proteins, derived from vancomycin-resistant enterococci types A and C. Both proteins adopt the canonical Bergerat fold that has been observed for CA domains of other prokaryotic histidine kinases. We attempted to determine structures for the nucleotide-bound forms of both proteins; however, despite repeated efforts, these forms could not be crystallized, prompting us to measure the proteins' binding affinities for ATP. Unexpectedly, both CA domains displayed low affinities for the nucleotide, with K D values in the low millimolar range. Since these K D values are comparable to intracellular ATP concentrations, this weak substrate binding could reflect a way of regulating expression of the resistance phenotype.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

Nanometer-Scale Measurement of Grid Finger Electrical Conduction Pathways to Detect Series Resistance Degradation of Utility-Scale Silicon Solar Cells

Here, we report on an electrical conduction mechanism for series resistance (Rs) degradation observed in a utility-scale photovoltaic power plant by imaging the local resistance at the Ag/Si interface of the c-Si front metallization. Scanning spreading resistance microscopy imaging with nanometer (nm) scale spatial resolution revealed that the number of point or small-area electrical contacts decreased substantially in a degraded cell compared to an unaffected cell, demonstrating the root cause of Rs degradation. The decrease in electrical contacts is likely caused by a structural change - the Ag particles in contact with the Si cell (or via a nm-thickness tunneling glass layer) aggregate into bulk Ag, and a highly resistive glass frit forms a belt shape at the Ag/Si interface. This resistive belt, with a thickness of ~1 um, blocks the current conduction from the cell emitter to the Ag grid. Our microscopy results help to unravel unambiguously the degradation mechanism and demonstrate an example of the multiscale characterization approach for understanding degradation in field-weathered PV module.

14 SOLAR ENERGY↗

DOE OSTI2022

Local nm-Scale Imaging of Electrical Contact for Series Resistance Degradation of Silicon Solar Cells

We report on an electrical conduction mechanism for series resistance (Rs) degradation observed in a utility scale solar farm by nm-scale imaging of the local resistance at the Ag/Si interface of c-Si front metallization. Scanning spreading resistance microscopy imaging revealed that the number of point or small area electrical contacts decreased in a degraded cell compared to an unaffected cell, demonstrating the direct root cause of the Rs degradation. The degraded cell shows both a morphological and chemical difference in the screen-printed finger contact compared to the unaffected cell, which likely caused the degradation during the long-term field service. The reduction in electrical contact is likely caused by a structural change: The Ag particles in contact with the Si cell aggregate into bulk Ag, and a highly resistive ceramic oxide is formed in a "belt" shape at the Ag/Si interface. This resistive belt with a thickness of ~1 um blocks the current conduction from cell emitter to the Ag grid. Our results demonstrate an example of the multi-scale characterization approach for understanding degradation mechanisms in photovoltaics.

c-Si solar cell↗