Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Reference Electrode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Oxygen potentials and phase equilibria in the system Ca–Co–O and thermodynamic properties of Ca{sub 3}Co{sub 2}O{sub 6} and Ca{sub 3}Co{sub 4}O{sub 9.163}

Oxygen potentials established by the equilibrium between three condensed phases, CaO{sub ss}+CoO{sub ss}+Ca{sub 3}Co{sub 2}O{sub 6} and CoO{sub ss}+Ca{sub 3}Co{sub 2}O{sub 6}+Ca{sub 3}Co{sub 3.93+α}O{sub 9.36−δ}, are measured as a function of temperature using solid-state electrochemical cells incorporating yttria-stabilized zirconia as the electrolyte and pure oxygen as the reference electrode. Cation non-stoichiometry and oxygen non-stoichiometry in Ca{sub 3}Co{sub 3.93+α}O{sub 9.36−δ} are determined using different techniques under defined conditions. Decomposition temperatures and thermodynamic properties of Ca{sub 3}Co{sub 2}O{sub 6} and Ca{sub 3}Co{sub 4}O{sub 9.163} are calculated from the results. The standard entropy and enthalpy of formation of Ca{sub 3}Co{sub 2}O{sub 6} at 298.15 K are evaluated. Using thermodynamic data from this study and auxiliary information from the literature, phase diagram for the ternary system Ca–Co–O is computed. Isothermal sections at representative temperatures are displayed to demonstrate the evolution of phase relations with temperature. - Graphical abstract: Isothermal section of the phase diagram of the system Ca–Co–O at 1250 K. - Highlights: • Improved definition of cation and oxygen nonstoichiometry of Ca{sub 3}Co{sub 3.93+α}O{sub 9.36−δ}. • Measurement of Δμ{sub O{sub 2}} associated with two 3-phase fields as a function of temperature. • Use of solid-state electrochemical cells for accurate measurement of Δμ{sub O{sub 2}}. • Decomposition temperatures and thermodynamic properties for ternary oxides. • Characterization of ternary phase diagram of the system Ca–Co–O.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Lead leaching and electrowinning in acetic acid for solar module recycling

It is imperative to recover lead (Pb) contained in end-of-life solar modules. In this paper, a two-step leaching and electrowinning process using acetic acid is investigated for Pb recovery. Acetic acid with hydrogen peroxide can dissolve Pb quickly and, under some conditions, in a matter of minutes. Pb electrowinning has been successfully demonstrated from aqueous solutions of 0.009 M lead(II) acetate with 0–10% v/v acetic acid. Pb-containing deposits are found on both the copper cathode and graphite anode. X-ray diffraction, energy-dispersive X-ray spectroscopy, and Fourier transform infrared spectroscopy confirm the presence of metallic Pb and Pb(II) oxide (PbO) co-deposits on the cathode. Further, there is also the formation of lead subacetate on the cathode under certain conditions. On the anode, the deposit consists of lead(IV) oxide and superoxide (PbO 2 and Pb 1–x O 2 ). A Pb recovery rate of 99% is achieved in 0.009 M lead(II) acetate solutions with 10% v/v acetic acid by applying a reduction potential of either –0.8 V or –1.0 V versus the silver/silver chloride reference electrode for 24h. Pb leaching with acetic acid is also demonstrated from milled silicon solar modules.

14 SOLAR ENERGY↗
DOE OSTI2023

Temporal Ni K-Edge X-ray Absorption Spectroscopy Study Reveals the Kinetics of the Ni Redox Behavior of the Iron-Nickel Oxide Bimetallic OER Catalyst

Operando X-ray absorption spectroscopy (XAS) can be utilized to probe the phase and structural changes of FeNiOx and similar transition metal oxide electrocatalysts during electrocatalytic reactions. However, capturing the temporal changes occurring in the operando chemistry of electrocatalysts has been little studied. Here, in this work, we successfully capture the time-resolved changes at the Ni K-edge for both the X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) regions of an aqueous phase synthesized FeNiO x bimetallic nanoparticle electrocatalyst. During a stepped voltage experiment, the temporal change in the Ni K-edge was observed as the applied voltage was stepped from 0.7 to 0.8 V versus the silver/silver chloride reference electrode, and the change observed is associated with the Ni redox transition from the 2+ to 3+/4+ oxidation state. Individual XAS spectra were obtained in 90 s, and a total of 9 scans post voltage step showed a unique transition from a hydroxide to an oxyhydroxide phase. The shift in absorption edge energy position and the changes in spectral shape for individual scans explain the typically observed broadening of the Ni K-edge XANES spectrum during time-averaged operando XAS, and a kinetic analysis revealed a first-order observed rate constant, |k obs |, of 0.00426 s –1 and a half-life (t 1/2 ) of 163 s. Multivariate curve resolution-alternating least squares analysis followed by linear combination fitting analysis for time-averaged versus time-resolved Ni K-edge changes upon voltage step show distinct differences in estimated contributions from Ni 2+ oxide/hydroxide phases. Detailed EXAFS modeling shows the phase transition from hydroxide to oxyhydroxide on top of the unchanged metallic core.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Development and Scale-up of Continuous Electrocatalytic Hydrogenation of Functionalized Nitro arenes, Nitriles and Unsaturated Aldehydes

Electrolysis reactors based on the filter-press architecture of redox flow batteries have proven to be effective and scalable towards the production of commercially relevant, pharmaceutical quantities of anilines (>500 kg/year) from halogen-, hydroxyl-, and carbonyl-substituted nitroarenes. Turbulent flow through the carbon felts on which the catalysts were supported facilitated scaling towards production levels because it conferred on the reactors scale-independent, plug flow-like residence time distributions and high mass transfer coefficients. Equipping the cells with micro-reference electrodes made it possible to transfer reaction conditions first developed in batch systems to the continuous flow reactors. The catalysts prepared by incipient wetness impregnation of metal salts into lightly oxidized carbon felt supports were readily generalizable.

Egbert, Jonathan D.↗
DOE OSTI2018

Stable Platinum(IV) Corroles: Synthesis, Molecular Structure, and Room-Temperature Near-IR Phosphorescence

A series of stable Pt(IV) corrole complexes with the general formula Pt IV [TpXPC](m/p-C 6 H 4 CN)(py), where TpXPC 3- is the trianion of a tris(p-X-phenyl)corrole and X = CF 3 , H, and CH 3 , has been synthesized, affording key physicochemical data on a rare and elusive class of metallocorroles. Single-crystal X-ray structures of two of the complexes revealed very short equatorial Pt-N distances of 1.94-1.97 Å, an axial Pt-C distance of ~2.03 Å, and an axial Pt-N distance of ~2.22 Å. The complexes exhibit Soret maxima at ~430 nm, which are essentially independent of the meso-aryl para substituents, and strong Q bands with the most intense peak at 595-599 nm. The substituent-independent Soret maxima are consistent with an innocent Pt IV -corrole 3 - description for the complexes. The low reduction potentials (-1.45 ± 0.08 V vs saturated calomel reference electrode) also support a highly stable Pt(IV) ground state as opposed to a noninnocent corrole •2- description. The reductions, however, are irreversible, which suggests that they involve concomitant cleavage of the Pt-aryl bond. Unlike Pt(IV) porphyrins, two of the complexes, Pt IV [TpXPC](m-C 6 H 4 CN)(py) (X = CF 3 and CH 3 ), were found to exhibit room-temperature near-IR phosphorescence with emission maxima at 813 and 826 nm, respectively. Finally, the quantum yield of ~0.3% is comparable to those observed for six-coordinate Ir(III) corroles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

A Hybrid Catalyst-Bonded Membrane Device for Electrochemical Carbon Monoxide Reduction at Different Relative Humidities

A hybrid catalyst-bonded membrane device using gaseous reactants for a carbon monoxide reduction (COR) reaction in the cathode chamber, an aqueous electrolyte for an oxygen evolution reaction (OER) in the anode chamber, and an anion exchange membrane (AEM) for product separation as modeled, constructed, and tested. The Cu electrocatalyst was electrodeposited onto gas diffusion layers (GDLs) and was directly bonded to AEM by mechanical pressing in the hybrid device. The impacts of relative humidity at the cathode inlet on the selectivity and activity of COR were investigated by computational modeling and experimental methods. At a relative humidity of 30%, the Cu-based catalyst in the hybrid device exhibited a total operating current density of 87 mA cm -2 with a -2.0 V vs Ag/AgCl reference electrode, a Faradaic efficiency (FE) for C 2 H 4 generation of 32.6%, and an FE for a liquid-based carbon product of 42.6%. Significant improvements in the partial current densities for COR were observed in relation to planar electrodes or flooded gas diffusion electrodes (GDEs). Finally in addition, a custom test bed was constructed to characterize the oxidation states of the Cu catalysts in real time along with product analysis though the backside of the GDLs via operando X-ray absorption (XAS) measurements.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2017

Enhanced photoelectrochemical efficiency and stability using a conformal TiO 2 film on a black silicon photoanode

Black silicon (b-Si) is a surface-nanostructured Si with extremely efficient light absorption capability and is therefore of interest for solar energy conversion. However, intense charge recombination and low electrochemical stability limit the use of b-Si in photoelectrochemical solar-fuel production. Here we report that a conformal, ultrathin, amorphous TiO 2 film deposited by low-temperature atomic layer deposition (ALD) on top of b-Si can simultaneously address both of these issues. Combined with a Co(OH) 2 thin film as the oxygen evolution catalyst, this b-Si/TiO 2 /Co(OH) 2 heterostructured photoanode was able to produce a saturated photocurrent density of 32.3 mA cm –2 at an external potential of 1.48 V versus reversible reference electrode (RHE) in 1 M NaOH electrolyte. The enhanced photocurrent relative to planar Si and unprotected b-Si photoelectrodes was attributed to the enhanced charge separation efficiency as a result of the effective passivation of defective sites on the b-Si surface. The 8-nm ALD TiO 2 layer extends the operational lifetime of b-Si from less than half an hour to four hours.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A disordered rock salt anode for fast-charging lithium-ion batteries

Rechargeable lithium-ion batteries with high energy density that can be safely charged and discharged at high rates are desirable for electrified transportation and other applications. However, the sub-optimal intercalation potentials of current anodes result in a trade-off between energy density, power and safety. In this paper we report that disordered rock salt Li 3+ x V 2 O 5 can be used as a fast-charging anode that can reversibly cycle two lithium ions at an average voltage of about 0.6 volts versus a Li/Li + reference electrode. The increased potential compared to graphite reduces the likelihood of lithium metal plating if proper charging controls are used, alleviating a major safety concern (short-circuiting related to Li dendrite growth). In addition, a lithium-ion battery with a disordered rock salt Li 3 V 2 O 5 anode yields a cell voltage much higher than does a battery using a commercial fast-charging lithium titanate anode or other intercalation anode candidates (Li 3 VO 4 and LiV 0.5 Ti 0.5 S 2 ). Further, disordered rock salt Li 3 V 2 O 5 can perform over 1,000 charge–discharge cycles with negligible capacity decay and exhibits exceptional rate capability, delivering over 40 per cent of its capacity in 20 seconds. We attribute the low voltage and high rate capability of disordered rock salt Li 3 V 2 O 5 to a redistributive lithium intercalation mechanism with low energy barriers revealed via ab initio calculations. This low-potential, high-rate intercalation reaction can be used to identify other metal oxide anodes for fast-charging, long-life lithium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2023

Understanding the limits of Li-NMC811 half-cells

As we push the boundaries of state-of-the-art lithium-ion intercalation materials, such as nickel-rich chemistries, the ability to isolate and understand specific degradation and performance limitations is becoming increasingly important. Half-cells, wherein lithium metal is employed as a dual counter and reference electrode, are commonly used in industry and academia for this purpose. However, the high reactivity of lithium metal drives premature electrolyte degradation and limits cell lifetime, bringing into question the reliability and validity of this cell configuration. Here we explore the limitations of half-cell studies of LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) electrodes with commercially relevant loading. We identify the failure mechanism of this cell configuration through a combination of electrochemical, chemical, and spectroscopic techniques and show that the Li has a direct detrimental impact on the NMC811 chemistry. Our measurements show that vinylene carbonate is critical for these half-cell studies and underpins the cycle limits. Furthermore, we demonstrate the use of Li 4 Ti 5 O 12 (LTO) as an alternative counter electrode for understanding the performance of NMC positive electrode materials, due to its high coulombic efficiency and low reactivity with the organic carbonates routinely employed in lithium-ion battery cell chemistries. These data confirm that NMC811 electrodes can tolerate high voltages (stressed) conditions and that cell failure is mainly a result of crossover effects.

25 ENERGY STORAGE↗
DOE OSTI2025

Voltage breakdown analyses in anion exchange membrane water electrolysis – the contributions of catalyst layer resistance on overall overpotentials

Despite many recent advances, overpotentials remain high for anion exchange membrane water electrolyzers (AEMWEs). Voltage breakdown analyses (VBA) can help decouple the origins of overpotentials and facilitate design decisions to improve cell performance, but studies investigating how to adapt and apply VBA to AEMWEs are lacking. Specifically, catalyst layer resistances and their contributions to overpotentials are not consistently quantified in water electrolysis and are rarely quantified for AEMWEs. This work presents a systematic methodology for VBA tailored to AEMWEs, including an approach to Tafel analysis in the absence of a reference electrode and under conditions where both the oxygen evolution reaction and hydrogen evolution reaction exhibit significant overpotentials. Catalyst layer resistance contributions are diagnosed via changes in the catalyst layer thickness, transport layer porosity, ionomer content, and electrolyte concentration. In this study, we explain discrepancies between inherent catalytic kinetics and device level performance and identify catalyst layer design strategies to reduce catalyst layer resistances.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Electrochemical model of the polyaniline based organic memristive device

The electrochemical organic memristive device with polyaniline active layer is a stand-alone device designed and realized for reproduction of some synapse properties in the innovative electronic circuits, including the neuromorphic networks capable for learning. In this work, a new theoretical model of the polyaniline memristive is presented. The developed model of organic memristive functioning was based on the detailed consideration of possible electrochemical processes occuring in the active zone of this device. Results of the calculation have demonstrated not only the qualitative explanation of the characteristics observed in the experiment but also the quantitative similarities of the resultant current values. It is shown how the memristive could behave at zero potential difference relative to the reference electrode. This improved model can establish a basis for the design and prediction of properties of more complicated circuits and systems (including stochastic ones) based on the organic memristive devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2014

Fe(III) doped and grafted PbTiO{sub 3} film photocathode with enhanced photoactivity for hydrogen production

The photoelectrochemical activity of the PbTiO{sub 3} film photocathode deposited on indium tin oxide-coated quartz substrate was significantly improved through modifying the film surface by both the Fe(III) doping and grafting. Doping the PbTiO{sub 3} with Fe(III) ions narrows its band gap thus increases the visible light utilization, while the surface-grafted Fe(III) ions on the doped PbTiO{sub 3} surface are helpful to improve the charge transfer on the photocathode/electrolyte interface. Consequently, the photocurrent was increased from 38 μA/cm{sup 2} to 220 μA/cm{sup 2} under the irradiation of 100 mW/cm{sup 2} Xe lamp by using 0.1M Na{sub 2}SO{sub 4} as an electrolyte and zero-potential versus saturated calomel as a reference electrode. The corresponding increase in open circuit voltage was 0.95–1.11 V.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Tests on the extracted current density of negative hydrogen ions from a single element of the matrix source

Concepts for the extraction of volume-produced negative hydrogen ions from a rf matrix source (a matrix of small-radius discharges with a planar-coil inductive driving) are presented and discussed based on experimental results for the current densities of the extracted ions and the co-extracted electrons. The experiment has been carried out in a single discharge of the source: a rf discharge with a radius of 2.25 cm inductively driven by a 3.5-turn planar coil. The length of the discharge tube, the area of the reference electrode inserted in the discharge volume, the discharge modes, the magnetic filter and its position along the discharge length, the position of the permanent magnets for the separation of the co-extracted electrons from the extracted ions in the extraction device and the bias applied to its first electrode are considered as factors influencing the extracted currents of negative ions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Structural, electrical and electrochemical properties of Li{sub 4}Zr{sub x}Si{sub 1-x}O{sub 4} (0.02 ≤ x ≤ 0.06) ceramic electrolytes

The aim of this work was to investigate the structural, electrical and electrochemical properties of Li{sub 4}Zr{sub x}Si{sub 1-x}O{sub 4} (0.02 ≤ x ≤ 0.06) compounds prepared via sol gel method. The X-ray Diffraction results showed that all compounds can be indexed to monoclinic structure in space group P2{sub 1/m}. The Li{sub 4}Zr{sub 0.06}Si{sub 0.94}O{sub 4} compound showed highest bulk, grain boundary and total conductivity values of 1.19 × 10{sup −4} S cm{sup −1}, 4.75 × 10{sup −5} S cm{sup −1} and 3.41 × 10{sup −5} S cm{sup −1} respectively. The insertion of Zr{sup 4+} is found to enhance conductivity of the parent sample Li{sub 4}SiO{sub 4}. Linear sweep voltammetry results showed that Li{sub 4}Zr{sub 0.06}Si{sub 0.94}O{sub 4} ceramic electrolytes was electrochemically stable up to 5.07 V versus a Li{sup +}/Li{sup +} reference electrode.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Cyclic performance tests of Sn/MWCNT composite lithium ion battery anodes at different temperatures

In this study tin-multi walled carbon nanotube (Sn-MWCNT) lithium ion battery anodes were produced and their electrochemical galvanostatic charge/discharge tests were conducted at various (25 °C, 35 °C, 50 °C) temperatures to determine the cyclic behaviors of anode at different temperatures. Anodes were produced via vacuum filtration and DC magnetron sputtering technique. Tin was sputtered onto buckypapers to form composite structure of anodes. SEM analysis was conducted to determine morphology of buckypapers and Sn-MWCNT composite anodes. Structural and phase analyses were conducted via X-ray diffraction and Raman Spectroscopy technique. CR2016 coin cells were assembled for electrochemical tests. Cyclic voltammetry test were carried out to determine the reversibility of reactions between anodes and reference electrode between 0.01-2.0 V potential window. Galvanostatic charge/discharge tests were performed to determine cycle performance of anodes at different temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electrochemical and In Situ Spectroscopic Study of the Effect of Prussian Blue as a Mediator in a Solid-State Supercapacitor

In situ X-ray absorption spectroscopy (XAS) along with electrochemical measurements were used to explore the redox activity of Prussian blue (PB) and its contribution to pseudocapacitance in an asymmetrical solid-state supercapacitor (SC). The SC, with a configuration of (activated carbon)/polymer electrolyte membrane/(activated carbon + PB), was fabricated with an embedded KCl saturated Ag/AgCl reference electrode. The potentials of the two electrodes were generally displaced proportionally with increase in the cell voltage. Upon negative polarization from the open circuit voltage (OCV) condition to -3 V, the charge capacity was greater than that upon positive polarization from the OCV condition to +3 V, in agreement with the higher fraction of Fe(III) than that of Fe(II) and the low concentration of K ions in PB. Detailed analysis of cyclic voltammetry data in the range between 0 and -3 V indicates that the battery-like contribution to the charge current was 96% that of the capacitor-like contribution at a scanning rate of 2.5 mV s -1 but only 15% at 100 mV s -1 . The in situ XAS characterization results indicate that the majority of Fe was reversibly charged and discharged between Fe(III) and Fe(II) during positive and negative polarizations with minimal changes in local atomic structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Effect of Metal Chloride Impurities on Equilibrium Potential of Fe/FeCl 2 in Eutectic LiCl-KCl

In this study, interaction of dilute metal chloride solutes in molten eutectic LiCl-KCl was studied via equilibrium potential measurements. Open circuit potential (OCP) was measured between a pure iron rod and a Ag/AgCl reference electrode with concentration of FeCl 2 varying from 0.2–1 mol% at 530 °C. The Nernst equation was used to calculate activity coefficient of FeCl 2 based on OCP. Measurements were made in LiCl-KCl-FeCl 2 with and without additions of 0.5 mol% CsCl, NaCl, and LaCl 3 . The activity coefficient of FeCl 2 was found to be unaffected by these small concentrations of CsCl, LaCl 3 , and NaCl. However, there was observed evidence that the activity coefficient of FeCl 2 , above 0.8 mol% Fe, may be affected by the presence of LaCl 3 at higher concentrations beginning around 0.5 mol% La. Over the full range of conditions tested, the activity coefficient of FeCl 2 in molten LiCl-KCl ranged from 2.95 × 10 −5 to 1.01 × 10 −4 .

Electrochemistry↗