SEARCH · Engineering Papers

Results for “Rayleigh wave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS2009

Multiple-Point Mass Flux Measurement System Using Rayleigh Scattering

A multiple-point Rayleigh scattering diagnostic is being developed to provide mass flux measurements in gas flows. Spectroscopic Rayleigh scattering is an established flow diagnostic that has the ability to provide simultaneous density, temperature, and velocity measurements. Rayleigh scattered light from a focused 18 Watt continuous-wave laser beam is directly imaged through a solid Fabry-Perot etalon onto a CCD detector which permits spectral analysis of the light. The spatial resolution of the measurements is governed by the locations of interference fringes, which can be changed by altering the etalon characteristics. A prototype system has been used to acquire data in a Mach 0.56 flow to demonstrate feasibility of using this system to provide mass flux measurements. Estimates of measurement uncertainty and recommendations for system improvements are presented

Mielke, Amy F.↗

NASA NTRS2008

Dynamic Measurement of Temperature, Velocity, and Density in Hot Jets Using Rayleigh Scattering

A molecular Rayleigh scattering technique was utilized to measure time-resolved gas temperature, velocity, and density in unseeded gas flows at sampling rates up to 10 kHz. A high power continuous-wave (cw) laser beam was focused at a point in an air flow field and Rayleigh scattered light was collected and fiber-optically transmitted to a Fabry-Perot interferometer for spectral analysis. Photomultipler tubes operated in the photon counting mode allowed high frequency sampling of the total signal level and the circular interference pattern to provide time-resolved density, temperature, and velocity measurements. Mean and rms velocity and temperature, as well as power spectral density calculations, are presented for measurements in a hydrogen-combustor heated jet facility with a 50.8-mm diameter nozzle at the NASA Glenn Research Center (GRC). The Rayleigh measurements are compared with particle image velocimetry data and CFD predictions. This technique is aimed at aeronautics research related to identifying noise sources in free jets, as well as applications in supersonic and hypersonic flows where measurement of flow properties, including mass flux, is required in the presence of shocks and ionization occurrence.

Mielke, Amy F.↗

NASA NTRS2009

Dynamic Measurement of Temperature, Velocity, and Density in Hot Jets Using Rayleigh Scattering

A molecular Rayleigh scattering technique is utilized to measure gas temperature, velocity, and density in unseeded gas flows at sampling rates up to 10 kHz, providing fluctuation information up to 5 kHz based on the Nyquist theorem. A high-power continuous-wave laser beam is focused at a point in an air flow field and Rayleigh scattered light is collected and fiber-optically transmitted to a Fabry-Perot interferometer for spectral analysis. Photomultiplier tubes operated in the photon counting mode allow high-frequency sampling of the total signal level and the circular interference pattern to provide dynamic density, temperature, and velocity measurements. Mean and root mean square velocity, temperature, and density, as well as power spectral density calculations, are presented for measurements in a hydrogen-combustor heated jet facility with a 50.8-mm diameter nozzle at NASA John H. Glenn Research Center at Lewis Field. The Rayleigh measurements are compared with particle image velocimetry data and computational fluid dynamics predictions. This technique is aimed at aeronautics research related to identifying noise sources in free jets, as well as applications in supersonic and hypersonic flows where measurement of flow properties, including mass flux, is required in the presence of shocks and ionization occurrence.

Mielke, Amy F.↗

NASA NTRS1989

Shock-wave-induced mixing enhancement in scramjet combustors

An experimental study of the interaction between a weak shock wave and a supersonic shear layer was carried out to determine the possibility of shock-induced mixing enhancement. A supersonic (Mach 2.5) stream of nitrogen was mixed with a sonic helium jet downstream of a rearward-facing step to simulate the mixing region in the vicinity of a SCRAMJET flameholder. A small wedge was used to generate an oblique shock wave that impinges on the mixing layer. Schlieren flow visualization and Rayleigh scattering concentration measurements were carried out. The results indicate that significant spreading of the shear layer may occur downstream of the shock/shear layer interaction region. Further study is required to determine the mechanism of the observed spreading and the extent of the increase in mixing efficiency. Since there are shock-induced losses, an optimum mixing enhancement configuration will have to be determined before the method can be validated and successfully implemented in a SCRAMJET combustor.

Menon, S.↗

NASA NTRS1989

Linear instability of supersonic plane wakes

In this paper we present a theoretical and numerical study of the growth of linear disturbances in the high-Reynolds-number and laminar compressible wake behind a flat plate which is aligned with a uniform stream. No ad hoc assumptions are made as to the nature of the undisturbed flow (in contrast to previous investigations) but instead the theory is developed rationally by use of proper wake-profiles which satisfy the steady equations of motion. The initial growth of near wake perturbation is governed by the compressible Rayleigh equation which is studied analytically for long- and short-waves. These solutions emphasize the asymptotic structures involved and provide a rational basis for a nonlinear development. The evolution of arbitrary wavelength perturbations is addressed numerically and spatial stability solutions are presented that account for the relative importance of the different physical mechanisms present, such as three-dimensionality, increasing Mach numbers enough (subsonic) Mach numbers, there exists a region of absolute instability very close to the trailing-edge with the majority of the wake being convectively unstable. At higher Mach numbers (but still not large-hypersonic) the absolute instability region seems to disappear and the maximum available growth-rates decrease considerably. Three-dimensional perturbations provide the highest spatial growth-rates.

Papageorgiou, D. T.↗

NASA NTRS2000

Investigation of Density Fluctuations in Supersonic Free Jets and Correlation with Generated Noise

The air density fluctuations in the plumes of fully-expanded, unheated free jets were investigated experimentally using a Rayleigh scattering based technique. The point measuring technique used a continuous wave laser, fiber-optic transmission and photon counting electronics. The radial and centerline profiles of time-averaged density and root-mean-square density fluctuation provided a comparative description of jet growth. To measure density fluctuation spectra a two-Photomultiplier tube technique was used. Crosscorrelation between the two PMT signals significantly reduced electronic shot noise contribution. Turbulent density fluctuations occurring up to a Strouhal number (Sr) of 2.5 were resolved. A remarkable feature of density spectra, obtained from the same locations of jets in 0.5< M<1.5 range, is a constant Strouhal frequency for peak fluctuations. A detailed survey at Mach numbers M = 0.95, 1.4 and 1.8 showed that, in general, distribution of various Strouhal frequency fluctuations remained similar for the three jets. In spite of the similarity in the flow fluctuation the noise characteristics were found to be significantly different. Spark schlieren photographs and near field microphone measurements confirmed that the eddy Mach wave radiation was present in Mach 1.8 jet, and was absent in Mach 0.95 jet. To measure correlation between the flow and the far field sound pressure fluctuations, a microphone was kept at a distance of 50 diameters, 30 deg. to the flow direction, and the laser probe volume was moved from point to point in the flow. The density fluctuations in the peripheral shear layer of Mach 1.8 jet showed significant correlation up to the measurement limit of Sr = 2.5, while for Mach 0.95 jet no correlation was measured. Along the centerline measurable correlation was found from the end of the potential core and at the low frequency range (Sr less than 0.5). Usually the normalized correlation values increased with an increase of the jet Mach number. The experimental data point out eddy Mach waves as a strong source of sound generation in supersonic jets and fail to locate the primary noise mechanism in subsonic jets.

Panda, J.↗

NASA NTRSDate not supplied

Observations and 3D MHD Modeling of Small-scale Solar Prominence Oscillations

Small scaleoscillations were recently observed in prominences with high resolution Hinode/SOT and IRIS SJI in unprecedented detailand identified as fast magnetosonic waves. The high-resolution observations provide evidence of flows of cool material, fluid instabilities such as Kelvin-Helmholtz and Rayleigh-Taylor, and the spectroscopic information provides evidence of Doppler shifts, heating, and cooling of the prominence material. Recently nonlinear fast magnetosonic waves were observed withperiods in the range of 5–11 minutes and wavelengths in the plane of the sky (POS) of ~2000kmand flows, and the flows in narrow threads withPOS speed ∼16–46 km/s. Thenonlinear fast magnetosonic waves and flows were modeled using 2.5D MHD (Ofman & Kucera 2020). Here, we extend the studyof the nonlinear fast magnetosonic waves using more realistic 3D MHD model. The model includes the 3D structure of the density and the magnetic fieldas well as mode coupling anddemonstrate the propagating density compressions associated with the nonlinear fast magnetosonicwaves, as well as the guided modesin the pillar. The 3DMHD modelingimprove understanding ofthe POSeffects in limb prominence oscillations observations.The results of the modeling are useful for coronal seismology of the prominence structure.

Leon Ofman↗

NASA NTRS1977

Theoretical aspects of tidal and planetary wave propagation at thermospheric heights

A simple semiquantitative model is presented which allows analytic solutions of tidal and planetary wave propagation at thermospheric heights. This model is based on perturbation approximation and mode separation. The effects of viscosity and heat conduction are parameterized by Rayleigh friction and Newtonian cooling. Because of this simplicity, one gains a clear physical insight into basic features of atmospheric wave propagation. In particular, we discuss the meridional structures of pressure and horizontal wind (the solutions of Laplace's equation) and their modification due to dissipative effects at thermospheric heights. Furthermore, we solve the equations governing the height structure of the wave modes and arrive at a very simple asymptotic solution valid in the upper part of the thermosphere. That 'system transfer function' of the thermosphere allows one to estimate immediately the reaction of the thermospheric wave mode parameters such as pressure, temperature, and winds to an external heat source of arbitrary temporal and spatial distribution. Finally, the diffusion effects of the minor constituents due to the global wind circulation are discussed, and some results of numerical calculations are presented.

Volland, H.↗

NASA NTRS1985

Model Experiments with Slot Antenna Arrays for Imaging

A prototype imaging system at 31 GHz was developed, which employs a two-dimensional (5x5) array of tapered slot antennas, and integrated detector or mixer elements, in the focal plane of a prime-focus paraboloid reflector, with an f/D=1. The system can be scaled to shorter millimeter waves and submillimeter waves. The array spacing corresponds to a beam spacing of approximately one Rayleigh distance and a two-point resolution experiment showed that two point-sources at the Rayleigh distance are well resolved.

Johansson, J. F.↗

NASA NTRS1987

Approximating SIR-B response characteristics and estimating wave height and wavelength for ocean imagery

NASA Space Shuttle Challenger SIR-B ocean scenes are used to derive directional wave spectra for which speckle noise is modeled as a function of Rayleigh random phase coherence downrange and Poisson random amplitude errors inherent in the Doppler measurement of along-track position. A Fourier filter that preserves SIR-B image phase relations is used to correct the stationary and dynamic response characteristics of the remote sensor and scene correlator, as well as to subtract an estimate of the speckle noise component. A two-dimensional map of sea surface elevation is obtained after the filtered image is corrected for both random and deterministic motions.

Tilley, David G.↗

NASA NTRS1989

Periodic amplitude variations as precursors of plumes of equatorial ionospheric irregularities

Periodic amplitude fluctuations of VHF signals from a geostationary satellite monitored from near the magnetic equator have been observed in the evening hours as precursors of strong Rayleigh fading associated with plumes of irregularities. These periodic fluctuations called amplitude waves exhibit amplitude changes of only 1 to 2 dB and have been observed for up to 30 minutes before the onset of strong scintillations. Individual fades are correlated over distances of at least 120 km in the magnetic east-west direction. The velocity of these wavelike disturbances has been found to be approximately 140 m/s eastward with a corresponding wavelength of 25 km.

Klobuchar, J. A.↗

NASA NTRS1991

Quantum mechanical calculations to chemical accuracy

The accuracy of current molecular-structure calculations is illustrated with examples of quantum mechanical solutions for chemical problems. Two approaches are considered: (1) the coupled-cluster singles and doubles (CCSD) with a perturbational estimate of the contribution of connected triple excitations, or CCDS(T); and (2) the multireference configuration-interaction (MRCI) approach to the correlation problem. The MRCI approach gains greater applicability by means of size-extensive modifications such as the averaged-coupled pair functional approach. The examples of solutions to chemical problems include those for C-H bond energies, the vibrational frequencies of O3, identifying the ground state of Al2 and Si2, and the Lewis-Rayleigh afterglow and the Hermann IR system of N2. Accurate molecular-wave functions can be derived from a combination of basis-set saturation studies and full configuration-interaction calculations.

Bauschlicher, Charles W., Jr.↗

NASA NTRS1992

Propagation Of Sound In Curved Ducts

Monograph presents concise, comprehensive summary of knowledge of propagation of acoustic waves in ducts and pipes including bends. Pulls together information from Lord Rayleigh's book Theory Of Sound, published in 1878, and from 33 papers scattered throughout various scientific journals published between 1945 and 1989. Monograph useful to scientists and engineers interested in such diverse topics as musical instruments, air-conditioning ducts, and jet engines. Material not available in current texts.

Rostafinski, Wojciech↗

DOE OSTI2025

A fluctuating hydrodynamics model for nanoscale surfactant-laden interfaces

A multispecies diffuse interface model is formulated in a fluctuating hydrodynamics framework for the purpose of simulating surfactant interfaces at the nanoscale. The model generalizes previous work to ternary mixtures, employing a Cahn-Hilliard free energy density combined with incompressible, isothermal fluctuating hydrodynamics where dissipative fluxes include both deterministic and stochastic terms. The intermolecular parameters in the free energy are chosen such that one species acts as a partially miscible surfactant. From Laplace pressure measurements, we show that in this model the surface tension decreases linearly with surfactant concentration, leading to Marangoni convection for interfaces with concentration gradients. In the capillary wave spectrum for interfaces with and without surfactant, we find that for the former, the spectrum deviates significantly from classical capillary wave theory, presumably due to Gibbs elasticity. In non-equilibrium simulations of the Rayleigh-Plateau instability, deterministic simulations showed that the surfactant delays pinching of a fluid cylinder into droplets. However, stochastic simulations indicate that thermal fluctuations disrupt the surfactant's stabilizing effect. Similarly, the spreading of a patch of surfactant, driven by Marangoni convection, was found to be partially suppressed by thermal fluctuations.

Capillary waves↗

NASA NTRS1988

Electromagnetic wave scattering from some vegetation samples

For an incident plane wave, the field inside a thin scatterer (disk and needle) is estimated by the generalized Rayleigh-Gans (GRG) approximation. This leads to a scattering amplitude tensor equal to that obtained via the Rayleigh approximation (dipole term) with a modifying function. For a finite-length cylinder the inner field is estimated by the corresponding field for the same cylinder of infinite lenght. The effects of different approaches in estimating the field inside the scatterer on the backscattering cross section are illustrated numerically for a circular disk, a needle, and a finite-length cylinder as a function of the wave number and the incidence angle. Finally, the modeling predictions are compared with measurements.

Karam, Mostafa A.↗

NASA NTRS1971

Further studies of propellant sloshing under low-gravity conditions

A variational integral is formulated from Hamilton's Principle and is proved to be equivalent to the usual differential equations of low-gravity sloshing in ellipsoidal tanks. It is shown that for a zero-degree contact angle the contact line boundary condition corresponds to the stuck condition, a result that is due to the linearization of the equations and the ambiguity in the definition of the wave height at the wall. The variational integral is solved by a Rayleigh-Ritz technique. Results for slosh frequency when the free surface is not bent-over compare well with previous numerical solutions. When the free surface is bent over, however, the results for slosh frequency are considerably larger than those predicted by previous finite-difference, numerical approaches: the difference may be caused by the use of a zero degree contact angle in the present theory in contrast to the nonzero contact angle used in the numerical approaches.

Dodge, F. T.↗

NASA NTRS1991

Noise from turbulent shear flows

The generation of sound in turbulent shear flows with high Reynolds numbers is discussed. Solid surface effects, representation of incident turbulence, sound generation and the role of instability waves, sound generation by turbulence interacting with itself (the jet noise problem), compressible Rayleigh equations, sound generation from streamwise variations in mean flow, complex turbulent flows, and supersonic flows are among the topics discussed.

Goldstein, M. E.↗

NASA NTRS1990

Stability of an oscillated fluid with a uniform density gradient

Instabilities in a fluid with a constant density gradient that is subject to arbitrarily oriented oscillatory accelerations are considered. With the Boussinesq approximation and for the case of an unbounded fluid, transformation to Lagrangian coordinates allows the reduction of the problem to an ordinary differential equation for each three-dimensional wavenumber. The problem has three parameters: the nondimensional amplitude R of the base-state oscillation, the nondimensional level of background steady acceleration, which for some cases can be represented in terms of a local (in time) Richardson number Ri, and the Prandtl number Pr. Some general bounds on stability are derived. For Pr = 1 closed-form solutions are found for impulse (delta function) accelerations and a general asymptotic solution is constructed for large R and general imposed accelerations. The asymptotic solution takes advantage of the fact that at large R wave growth is concentrated at 'zero points'. These are times when the effective vertical wavenumber passes through zero. Kelvin-Helmholtz instabilities are found to dominate at low R, while Rayleigh-Taylor instabilities dominate at high R. At high R, the uniform shear of the Kelvin-Helmholtz case tends to distort and weaken instability waves. With unsteady flows, Ri = 1/4 is no longer an instability limit. Significant instabilities have been found for sinusoidal forcing for Ri up to 0.6.

Jacqmin, David↗