SEARCH · Engineering Papers

Results for “Rapid solidification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Effects of Non-equilibrium Solidification on the Material Properties of Brick Silicon for Photovoltaics

Silicon ingot growth technologies like the Ubiquitous Crystallization Process (UCP) are solidified within a shaping crucible. The rate at which heat can be lost from this crucible minus the rate at which heat is input from an external source determines the rate at which crystallization will occur. Occasionally, when the process parameters for solidification are exceeded, the normally large multi-centimeter grain size material assocated with the UCP will break down into regions containing extremely small, millimeter or less, grain size material. Accompanying this breakdown in grain growth is the development of so called sinuous grain boundaries. The breakdown in grain growth which results in this type of small grain structure with sinuous boundaries is usually associated with the rapid crystallization that would accompany a system failure. This suggests that there are limits to the growth velocity that one can obtain and still expect to produce material that would possess good photovoltaic properties. It is the purpose to determine the causes behind the breakdown of this material and what parameters will determine the best rates of solidification.

Regnault, W. F.↗

NASA NTRS1984

Rapidly Solidified Alloys Made by Chill Block Melt-spinning Processes

Chill block melt-spinning (CBMS) processes are used to make rapidly solidified microcrystalline and amorphous alloy ribbon, flakes, etc. Fundamentals of CBMS processes are discussed in light of recent advances. Special regard is given to ribbon geometric defects (edge serrations, surface asperities, etc.). Photomicrographs of CBMS ribbon solidification microstructures are used to compare local solidification rates, especially in the vicinity of ribbon defects.

Liebermann, H. H.↗

NASA NTRS2000

Effect of g-jitter on Directional Solidification of a Binary Alloy

A study of directional solidification of a weak binary alloy (specifically, Bi - 1 at% Sn) based on the fixed grid single domain approach is being undertaken. The enthalpy method is used to solve for the temperature field over the computational domain including both the solid and liquid phases; latent heat evolution is treated with the aid of an effective specific heat coefficient. A source term accounting for the release of solute into the liquid during solidification has been incorporated into the solute transport equation. The vorticity-stream function formulation is used to describe thermosolutal convection in the liquid region. In this paper we present a numerical simulation of g-jitter: the small, rapid fluctuations in gravitational acceleration which may be experienced in an orbiting space vehicle. A background gravity of 1 micro-g has been assumed, and new results for the effects of orientation angle of the periodic disturbances over a range of amplitudes and frequencies on solute field and segregation have been presented.

Santiviriyapanich, P.↗

NASA NTRS1982

Solidification process control for advanced superalloys

The importance of understanding and controlling the basic solidification process in high temperature alloy technology as applied to gas turbine engine production is discussed. Resultant tailoring of the superalloy macro- and microstructure offers significant potential for continued advances in superalloy use temperatures in turbine engines. Atomized superalloy powders, rapidly solidified superalloys, microstructural control, and advanced superalloys are discussed.

Hugh R. Gray↗

NASA NTRS1984

Thermosolutal convection during directional solidification

During solidification of a binary alloy at constant velocity vertically upward, thermosolutal convection can occur if the solute rejected at the crystal-melt interface decreases the density of the melt. We assume that the crystal-melt interface remains planar and that the flow field is periodic in the horizontal direction. The time-dependent nonlinear differential equations for fluid flow, concentration, and temperature are solved numerically in two spatial dimensions for small Prandtl numbers and moderately large Schmidt numbers. For slow solidification velocities, the thermal field has an important stabilizing influence: near the onset of instability the flow is confined to the vicinity of the crystal-melt interface. Further, for slow velocities, as the concentration increases, the horizontal wavelength of the flow decreases rapidly - a phenomenon also indicated by linear stability analysis. The lateral inhomogeneity in solute concentration due to convection is obtained from the calculations. For a narrow range of solutal Rayleigh numbers and wavelengths, the flow is periodic in time.

Mcfadden, G. B.↗

NASA NTRS1988

Crystallization of supercooled solutions

Crystallization of uniformly supercooled solutions (Na2SO4, NaCl, H2SO4, HNO3, HCl) was studied. It is shown how crystal growth velocity and habit depend on solution and concentration. The segregation coefficient for the solute in ice is measured by analysis of ice and solution, separated immediately after initial freezing, at different supercoolings. Subsequent solidification gives ion rejection at a varying rate depending on the geometry of the freezing, and may result in separation of hydrates, particularly when the initial concentration is high, as in haze (inactivated) droplets and low temperatures found in the Antarctic stratosphere. Electrical effects associated with rapid freezing are also investigated. Results suggest that more extensive measurements need to be made in solutions at different supercoolings, and that substantial electrical effects may be present for higher concentrations under these conditions. Damage to vegetation could occur under specific conditions as concentrated solutions (possibly H2SO4) are rejected in the freezing of rime or dew.

Harrison, K.↗

NASA NTRS1989

Crustal diffusion of gases out of Mercury and the moon

An upper limit to the rate of diffusion of sodium and potassium out of Mercury and the moon was calculated, and the resulting flux was compared to that required to maintain the known exospheres. It was found that diffusion rates are inadequate by 12 orders of magnitude on the moon and 9 orders of magnitude on Mercury for diffusion out of orthoclase minerals. Diffusion will be more rapid out of pure glass by five to six orders of magnitude and out of shocked basalt by an amount depending on the microstructure of the mineral. The observed abundance and distribution of volatiles in small glass spherules on the moon indicates that diffusion is very inefficient after solidification and cooling. At Mercury, the limitation on sodium flux to the atmosphere is shown to be the rate at which new regolith is created. The discrepancy between the observed column abundance of sodium in the Mercurean atmosphere and the known sources may indicate that either Mercury's crust has a larger volatile content than the moon or that a recycling mechanism exists in the Mercurean atmosphere which is not present for the moon.

Killen, R. M.↗

NASA NTRS1988

Noncontact temperature measurement: Requirements and applications for metals and alloys research

Temperature measurement is an essential capability for almost all areas of metals and alloys research. In the microgravity environment many of the science priorities that have been identified for metals and alloys also require noncontact temperature measurement capability. For example, in order to exploit the full potential of containerless processing, it is critical to have available a suitable noncontact temperature measurement system. This system is needed to track continuously the thermal history, including melt undercooling and rapid recalescence, of relatively small metal spheres during free-fall motion in drop tube systems. During containerless processing with levitation-based equipment, accurate noncontact temperature measurement is required to monitor one or more quasi-static samples with sufficient spatial and thermal resolution to follow the progress of solidification fronts originating in undercooled melts. In crystal growth, thermal migration, coarsening and other experiments high resolution thermal maps would be a valuable asset in the understanding and modeling of solidification processes, fluid flows and microstructure development. The science and applications requirements place several constraints on the spatial resolution, response time and accuracy of suitable instrumentation.

Perepezko, J. H.↗

NASA NTRS2026

Controlled Parametric Forcing During Directional Solidification of a Bulk Organic Alloy Under Microgravity

The response of dendritic microstructures to step-like pulling velocity conditions is investigated using microgravity directional solidification experiments conducted on DECLIC-DSI combined with phase-field simulations. Under a constant pulling velocity of 1.5 µm/s, the evolution toward steady-state growth is characterized in terms of primary spacing, dendrite drift, and tip dynamics. For the first time, side-view observations enabled direct measurement of tip radius and sidebranching frequency. When step-like oscillations of the pulling velocity are imposed, the dendritic array exhibits a strongly period-dependent response: short periods lead to rapid tip adaptation, whereas longer periods induce a phase lag between tip position and morphology, resulting in progressive tip flattening and, above a critical period, interface destabilization and dendrite splitting. Quantitative phase-field simulations, including a realistic thermal field and stochastic noise, reproduce the experimental observations and provide insight into the governing mechanisms, highlighting the role of characteristic relaxation times, sequence-dependent effects, and the irreversible reorganization of the microstructure following splitting.

Microgravity↗

NASA NTRS1988

The development of two new KC-135 furnaces for studies on microgravity materials processing

Wyle Laboratories is currently designing and fabricating two KC-135 materials processing furnaces for Marshall Space Flight Center. The first of these, called the Rapid Melt/Rapid Quench (RM/RQ) Furnace, will be used to melt and resolidify Cu-, Al-, and Ni-based alloys and composites, all during the 20 to 30 seconds of low gravity (0.1 to 0.001 g) available in a single parabola of the KC-135. In addition, it will be capable of directional solidification of these alloys. The furnace can be configured for either liquid or gas quenching of the samples. The second furnace, called the Polymer Solidification Transparent (PST) Furnace, will use a wide range of sample translation rates to directionally solidify polymers and low-melting-point metals as the KC-135 flies a series of parabolic maneuvers. The use of transparent crucibles and an optics system between the hot and cold zones of the furnace will allow for high-resolution video monitoring of the solid-liquid interface during processing. It is hoped that the development of these two furnaces will lead to significant increases in understanding of interface kinetics, fluid flow, and heat transfer in materials during solidification in a low-gravity environment.

Fiske, Michael↗

NASA NTRS1986

Reactions occurring during the sulfation of sodium chloride deposited on alumina substrates

The reaction between solid NaCl and air containing 1 pct SO2 has been studied between 500 and 700 C. The reaction product, Na2SO4, forms not only on the surface of the NaCl but also on surrounding areas of the substrate due to the volatility of the NaCl at these temperatures. At the higher temperatures, the vapor pressure of NaCl is so high that the majority of the reaction product is distributed on the substrate. Above 625 C, the reaction product is a liquid solution of NaCl and Na2SO4 that exists only so long as NaCl is supplied from the original crystal source. Eventually, the liquid solidifies by constitutional solidification as the NaCl is converted to Na2SO4. While it exists, the liquid NaCl-Na2SO4 solution is shown to be highly corrosive to Al2O3 and, on a scale of Al2O3 growing on alloy HOS 875, particularly attacks the grain boundaries of the scale at preferred sites where chromium and iron oxides and sulfides rapidly develop. This is proposed as one mechanism by which NaCl deposition contributes to the initiation of low temperature hot corrosion.

Wu, C. S.↗

NASA NTRS1984

Results of the technical exchange agreement between NASA and DuPont on the containerless drop tube solidification of NiAl3

The final results of the Drop Tube Solidification of NiAl3 are presented. Problems associated with the utilization of a dripper furnace in the drop tube are discussed and the modification of experimental procedures required to achieve results are described. Sample microstructures of drop tube samples are compared with other samples. The dendrite arm spacings of drop tube samples are correlated with the rapid cooling rates.

Ethridge, E. C.↗

NASA NTRS1985

Cyclic Structural Analyses of SSME Turbine Blades

The problems of calculating the structural response of high-temperature space propulsion components such as turbine blades for the fuel turbopump are addressed. The first high-pressure-stage fuel turbine blade (HPFTB) in the liquid-hydrogen turbopump of the space shuttle main engine (SSME) was selected for this study. In the past these blades have cracked in the blade shank region and at the airfoil leading edge adjacent to the platform. To achieve the necessary durability, these blades are currently being cast by using directional solidification. Single-crystal alloys are also being investigated for future SSME applications. The study evaluated the utility of advanced structural analysis methods in assessing the low-cycle fatigue lives of these anisotropic components. The turbine blade airfoil of the high-pressure stage of the SSME fuel turbopump was analyzed because it has a history of rapid crack initiation.

Kaufman, A.↗

NASA NTRS1995

Texturing of high T(sub c) superconducting polycrystalline fibers/wires by laser-driven directional solidification in an thermal gradient

This paper summarizes the technique of laser-driven directional solidification in a controlled thermal gradient of yttria stabilized zirconia core coated Y-Ba-Cu-O materials to produce textured high T(sub c) superconducting polycrystalline fibers/wires with improved critical current densities in the extended range of magnetic fields at temperatures greater than 77 K. The approach involves laser heating to minimize phase segregation by heating very rapidly through the two-phase incongruent melt region to the single phase melt region and directionally solidifying in a controlled thermal gradient to achieve highly textured grains in the fiber axis direction. The technique offers a higher grain growth rate and a lower thermal budget compared with a conventional thermal gradient and is amenable as a continuous process for improving the J(sub c) of high T(sub c) superconducting polycrystalline fibers/wires. The technique has the advantage of suppressing weak-link behavior by orientation of crystals, formation of dense structures with enhanced connectivity, formation of fewer and cleaner grain boundaries, and minimization of phase segregation in the incongruent melt region.

Varshney, Usha↗

NASA NTRS2001

Innovative Technologies for a Space Station Microgravity Furnace

Several Innovations were developed for a high gradient directional solidification vacuum furnace with quench capability, called the Quench Module Insert. The QMI hot zone employs advanced heater elements in a multiple zone configuration and uses a novel instrumentation approach for temperature control. A fiber interface material provides a low friction, high heat extraction interface between a reconfigurable cold zone and the science sample. The quench utilizes a metal phase change to provide rapid, resource efficient quenching of science samples. This paper provides conceptual details and performance data on these innovations.

Carswell, B.↗

NASA NTRS1987

Precipitation in a rapidly solidified and aged Ni-Al-Mo alloy

The early stages of decomposition of a highly supersaturated nickel-base alloy have been studied using TEM, SEM, and X-ray diffraction. The material was produced as a metastable solid solution by chill-block melt-spinning. On aging, the material exhibited a number of decomposition products appearing in series or concomitantly. Some of the decomposition products of this alloy, Ni4Mo, Ni3Mo, and Ni2Mo, are related to those found in Ni-Mo binary alloys. Alpha-Mo formed during solidification was distinguished from that formed by precipitation in the solid state by orientation relationships.

Nash, P.↗

NASA NTRS1988

Process modelling for space station experiments

The work performed during the first year 1 Oct. 1987 to 30 Sept. 1988 involved analyses of crystal growth from the melt and from solution. The particular melt growth technique under investigation is directional solidification by the Bridgman-Stockbarger method. Two types of solution growth systems are also being studied. One involves growth from solution in a closed container, the other concerns growth of protein crystals by the hanging drop method. Following discussions with Dr. R. J. Naumann of the Low Gravity Science Division at MSFC it was decided to tackle the analysis of crystal growth from the melt earlier than originally proposed. Rapid progress was made in this area. Work is on schedule and full calculations were underway for some time. Progress was also made in the formulation of the two solution growth models.

Rosenberger, Franz↗

NASA NTRS1987

Rapid melt/quench furnace using commercially available hardware

This report describes an off-the-shelf Orbital Tube Welder that can be easily used to melt and resolidify almost any electrically conductive material. This can be done on a KC-135 Aircraft within the microgravity period of one parabola. Melt sizes 3 mm diameter by 10 mm length and larger are feasible with most if not all materials. A highly reproducible, controlled, programmable heat and cool cycle can be provided. Sample measurements would have to be developed and could be as sophisticated or as simple as desired. These could include: optical and thermocouple temperature measurements, Peltier pulser for marking the solidification fronts, dimensional changes and whatever. Sample heat flows could be fixed over a very wide range being limited mostly by the cooling period, the desired sample size, and the 20 sec microgravity period of the KC-135 Aircraft parabola.

Poorman, Richard M.↗