Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RESIN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Nitrated Anion Exchange Resin Disposal Plan Calcination Studies

Reillex HPQ resin was nitrated in a manner matching procedures in use by the Aqueous Nitrate Recovery Facility. The resin was kept wet and then calcined to determine if nitrate was present in the residue. The potential for dispersion during heating and generation of soot or ash was evaluated. A series of experiments were performed by calcining the resin to 650 °C, and both residual solids and liquids were collected and measured for nitrates by Raman spectroscopy and test strip measurements.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Exploring the functional performance of a commercial hightemperature photopolymer resin for vat photopolymerized injection molding tools

• Selective photopolymerization of a liquid photocurable resin using ultraviolet (UV) or visible light in discrete layers • Photocurable resins are typically a mixture of monomer(s), oligomer(s), photoinitator(s), and additive(s), when applicable • Recent advances in high-performance resins have made VPP increasingly viable for functional tooling applications

Jones, Haley W. [Savannah River National Laborator↗
NASA NTRS1967

Photosensitive filler minimizes internal stresses in epoxy resins

Photosensitive filler is added to curable epoxy resins to minimize stress from internal shrinkage during curing or polymerization. Cinnamic acid resins and cinnamal ketones may be added in the amount of 1 to 3 percent by weight of the resin mixture.

Dillon, J. N.↗
NASA NTRS1972

Moisture effects on the high-temperature strength of fiber-reinforced resin composites.

Under NAS 8-27435, the Convair Aerospace Division of General Dynamics and their subcontractor, Hercules Incorporated, have conducted studies on the effects of moisture on the properties of fiber-reinforced resin composites and on the epoxy resins presently used in advanced composites. Data are presented on the resins and composites subjected to varying time/temperature/humidity or time/temperature/water-boil exposures. The effects of moisture on matrix, reinforcement, and fiber/resin interface are discussed and supported by experimental test data.

Hertz, J.↗
NASA NTRS1976

Recent advances in the development of composites based on the NCNS resins

The NCNS resins, a new class of addition polymerized polyaromatic melamines, have undergone further development in the past year. Pilot plant quantities of resin NCNS-12M have been made available for evaluation. High solids laminating varnishes were prepared in alcohol/ethyl acetate and alcohol/chlorinated solvent mixtures. The prepregs had sufficient room temperature stability after three month storage to retain good processing characteristics and good bonded mechanical properties. Laminates were fabricated by vacuum bag-autoclave processing and by 5 minute press molding cycles. These laminates had low flame spread and low smoke emitting properties and retained good elevated temperature properties upon long-term oxidative aging. Humidity aging studies were carried out for 30 days at 95% R.H., 120 F. on NCNS/graphite fiber laminates. Initial results indicate that the NCNS resins, particularly those prepared from polymethylene polyphenylamines, are resistant to environmental degradation of elevated temperature mechanical strength.

Kray, R. J.↗
NASA NTRS1980

Improved microbial-check-valve resins

Improved microbial-check-valve resins have been tested for their microbicidal effectiveness and long-term stability. Resins give more-stable iodine concentrations than previous preparations and do not impart objectionable odor or taste to treated water. Microbial check valve is small cylindrical device, packed with iodide-saturated resin, that is installed in water line where contamination by micro-organisms is to be prevented. Prototype microbial check valve was tested for stability and performance under harsh environmental conditions. Effectiveness was 100 percent at 35 deg, 70 deg, and 160 deg F (2 deg, 21 deg, and 71 deg C).

Colombo, G. V.↗
NASA NTRS1978

Bismaleimide resins for flame resistant honeycomb sandwich panels

A 60 kg batch of Resin M751 was produced in pilot plant scale. The resin was delivered to the prepreg company as an NMP solution. 100 kg of glass-fabric prepregs were fabricated. Prepreg characteristics and curing cycles for laminate fabrication were provided. A new batch of Resin M756 (Code M756 - 2) was synthesized.

Source record↗
NASA NTRS1979

Moisture diffusion parameter characteristics for epoxy composites and neat resins

The moisture absorption characteristics of two graphite/epoxy composites and their corresponding cured neat resins were studied in high humidity and water immersion environments at elevated temperatures. Moisture absorption parameters, such as equilibrium moisture content and diffusion coefficient derived from data taken on samples exposed to high humidity and water soak environments, were compared. Composite swelling in a water immersion environment was measured. Tensile strengths of cured neat resin were measured as a function of their equilibrium moisture content after exposure to different moisture environments. The effects of intermittent moderate tensile loads on the moisture absorption parameters of composite and cured neat resin samples were determined.

Long, E. R., Jr.↗
NASA NTRS1979

Feasibility study on the development of tough, moisture-resistant laminating resins

The potential of cyanate resins as replacement for epoxy resins in composites with graphite fiber reinforcement was investigated in an effort to provide improved moisture resistance and toughness in laminating systems at a projected cost, handleability, and processing requirements equivalent to 400 K (260 F) curing epoxies. Monomer synthesis, formulation, blending, resin preparation, catalysis studies, prepreg preparation, laminate fabrication, and testing are discussed. A graphite fiber reinforced laminate was developed with 95 percent retention of the original 363 K (180 F) flexural strength and 70 percent retention of the 363 K (180 F) short beam shear strength after 500 hour exposure to 95 + 7 relative humidity at 324 K (120 F).

Brand, R. A.↗
NASA NTRS1979

Synthesis of improved polyester resins

Eighteen aromatic unsaturated polyester prepolymers prepared by a modified interfacial condensation technique were investigated for their solubility in vinyl monomers and ability to provide high char yield forming unsaturated polyester resins. The best resin system contained a polyester prepolymer of phthalic, fumaric and diphenic acids reacted with 2,7-naphthalene diol and 9,9-bis(4-hydroxyphenyl)fluorene. This prepolymer is very soluble in styrene, divinyl benzene, triallyl cyanurate, diallyl isophthalate and methylvinylpyridine. It provided anaerobic char yields as high as 41 percent at 800 C. The combination of good solubility and char yield represents a significant improvement over state-of-the-art unsaturated polyester resins. The majority of the other prepolymers had only low or no solubility in vinyl monomers. Graphite composites from this prepolymer with styrene were investigated. The cause for the observed low shear strengths of the composites was not determined, however 12-week aging of the composites at 82 C showed that essentially no changes in the composites had occurred.

Mcleod, A. H.↗
NASA NTRS1980

Liquid chromatographic characterization of PMR-15 resin and prepreg

A liquid chromatographic method has been developed capable of providing a chemical fingerprint of PMR-15 resin solutions and prepreg. The amounts of two of the monomers can be quantified so their experimentally determined molar ratio can be compared to the formulated one. Only the monomers were detected in fresh resin solution, whereas several additional components, resulting from an association or reaction between the norbornenyl endcap and the amine, were detected in a resin solution aged for three days. Two commercial prepregs exhibited fingerprints similar to that of laboratory material, but three others contained additional components corresponding to higher esters and nadimides.

Reed, K. E.↗
NASA NTRS1979

Advanced thermoset resins for fire-resistant composites

The thermal and flammability properties of some thermoset polymers and composites are described. The processing and evaluation of composites fabricated from currently used resins and advanced fire-resistant resins are also described. Laboratory test methodology used to qualify candidate composite materials includes thermochemical characterization of the polymeric compounds and evaluation of the glass reinforced composites for flammability and smoke evolution. The use of these test methods will be discussed in comparing advanced laminating resins and composites consisting of modified epoxies, phenolics and bismaleimide, with conventional baseline materials consisting of epoxy.

Kourtides, D. A.↗
NASA NTRS1982

Improved Fire-Resistant Resins for Laminates

Fire-resistant resins for fabricating laminates with inorganic fibers, especially graphite fibers, are formed from bisimides containing main-chain phosphorus and olefinic end groups. Bisimides are thermally polymerized to form resins and laminates virtually imcombustible in pure oxygen at 300 degrees C. New resins are suitable for many applications requiring good adhesion and excellent resistance to heat, fire, solvents and chemicals.

Fohlen, G. M.↗
NASA NTRS1979

Flammability screening tests of resins

Selected flammability characteristics of glass cloth laminates of thermosetting resins are evaluated. A protocol for the evaluation of the flammability hazards presented by glass cloth laminates of thermosetting resins and the usefulness of that protocol with two laminates are presented. The glass laminates of an epoxy resin, M-751 are evaluated for: (1) determination of smoke generation from the laminates; (2) analysis of products of oxidative degradation of the laminates; (3) determination of minimum oxygen necessary to maintain flaming oxidation; (4) evaluation of toxicological hazards.

Arhart, R. W.↗
NASA NTRS1981

Investigation of the effect of resin material on impact damage to graphite/epoxy composites

The results of an experimental program are described which establishes the feasibility and guide lines for resin development. The objective was to identify the basic epoxy neat resin properties that improve low velocity impact resistance and toughness to graphite-epoxy laminates and at the same time maintain useful structural laminate mechanical properties. Materials tests from twenty-three toughened epoxy resin matrix systems are included.

Palmer, R. J.↗