Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REFLECTION COEFFICIENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

A uniform geometrical optics and an extended uniform geometrical theory of diffraction for evaluating high frequency EM fields near smooth caustics and composite shadow boundaries

A uniform geometrical optics (UGO) and an extended uniform geometrical theory of diffraction (EUTD) are developed for evaluating high frequency electromagnetic (EM) fields within transition regions associated with a two and three dimensional smooth caustic of reflected rays and a composite shadow boundary formed by the caustic termination or the confluence of the caustic with the reflection shadow boundary (RSB). The UGO is a uniform version of the classic geometrical optics (GO). It retains the simple ray optical expressions of classic GO and employs a new set of uniform reflection coefficients. The UGO also includes a uniform version of the complex GO ray field that exists on the dark side of the smooth caustic. The EUTD is an extension of the classic uniform geometrical theory of diffraction (UTD) and accounts for the non-ray optical behavior of the UGO reflected field near caustics by using a two-variable transition function in the expressions for the edge diffraction coefficients. It also uniformly recovers the classic UTD behavior of the edge diffracted field outside the composite shadow boundary transition region. The approach employed for constructing the UGO/EUTD solution is based on a spatial domain physical optics (PO) radiation integral representation for the fields which is then reduced using uniform asymptotic procedures. The UGO/EUTD analysis is also employed to investigate the far-zone RCS problem of plane wave scattering from two and three dimensional polynomial defined surfaces, and uniform reflection, zero-curvature, and edge diffraction coefficients are derived. Numerical results for the scattering and diffraction from cubic and fourth order polynomial strips are also shown and the UGO/EUTD solution is validated by comparison to an independent moment method (MM) solution. The UGO/EUTD solution is also compared with the classic GO/UTD solution. The failure of the classic techniques near caustics and composite shadow boundaries is clearly demonstrated and it is shown that the UGO/EUTD results remain valid and uniformly reduce to the classic results away from the transition regions. Mathematical details on the asymptotic properties and efficient numerical evaluation of the canonical functions involved in the UGO/EUTD expressions are also provided.

Constantinides, E. D.↗

Polarisation effects in gradient nano-optics

The spectra of reflection of s- and p-polarised waves from gradient nanocoatings at arbitrary angles of incidence are found within the framework of two exactly solvable models of such coatings. To use the detected spectra in the visible and IR ranges, for different frequencies and coating thicknesses we present the wave reflection coefficients as functions of dimensionless frequencies related to the refractive index gradient of the coating material. It is shown that reflection from the gradient coatings in question is an order of magnitude weaker than reflection from uniform coatings, other parameters of radiation and the reflection system being equal. We report a new exactly solvable model illustrating the specific effect of gradient film optics – the possibility of non-reflective propagation of an s-wave through such a film (an analogue of the Brewster effect). The prospects are shown for the use of gradient nanostructures with different refractive index profiles to fabricate broadband non-reflective coatings. (nanogradient dielectric coatings and metamaterials)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modelling nanofiltration of electrolyte solutions

This review critically examines current models for nanofiltration (NF) of electrolyte solutions. We start from linear irreversible thermodynamics, we derive a basic equation set for ion transfer in terms of gradients of ion electrochemical potentials and transmembrane volume flux. These equations are extended to the case of significant differences of thermodynamic forces across the membrane (continuous version of irreversible thermodynamics) and solved in quadratures for single salts and trace ions added to single salts in the case of macroscopically-homogeneous membranes. These solutions reduce to (quasi)analytical expressions in the popular Spiegler-Kedem approximation (composition independent phenomenological coefficients), which we extend to the case of trace ions. This enables us to identify membrane properties (e.g. ion permeances, ion reflection coefficients, electrokinetic charge density) that control its performance in NF of multi-ion solutions. Further, we specify the phenomenological coefficients of irreversible thermodynamics in terms of ion partitioning, hindrance and diffusion coefficients for the model of straight cylindrical capillaries. The corresponding expressions enable assessment of the applicability of the popular nanopore model of NF. This model (based on the use of macroscopic approaches at nanoscale) leads to a number of trends that have never been observed experimentally. We also show that the use of the Born formula (frequently employed for the description of dielectric exclusion) hardly leads to meaningful values of solvent dielectric constant in membrane pores because this formula disregards the very solvent structure whose changes are supposed to bring about the reduction of dielectric permittivity in nanopores. We conclude that the effect should better be quantified in terms of ion excess solvation energies in the membrane phase. As an alternative to the nanopore description of NF, we review recent work on the development of an advanced engineering model for NF of multi ion solutions in terms of a solution-diffusionelectromigration mechanism. This model (taking into account spontaneously arising transmembrane electric fields) captures several trends observed experimentally, and the use of trace ions can provide model parameters (ion permeances in the membrane) from experiment. We also consider a recent model (ultrathin barrier layers with deviations from local electroneutrality) that may reproduce observed feed-salt concentration dependences of membrane performance in terms of concentration independent properties like excess ion solvation energies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Note on reflection and transmission coefficients for converging-diverging ducts

Simple formulas for calculating acoustic reflection and transmission coefficients for converging-diverging ducts are derived; they extend the method of Cho and Ingard to arbitrary, slowly varying ducts. These formulas involve two parameters. The first is a function of duct shape and the second is the ratio of the duct radius downstream of the throat to that upstream of the throat to the upstream of the throat. An extension of the method to include mean flow is made for symmetric ducts.

Durbin, P. A.↗

Subluminal and superluminal parametric doppler effects in the case of light reflection from a moving smooth medium inhomogeneity

The reflection of test radiation from a smooth inhomogeneity of medium characteristics propagating with a subluminal or superluminal velocity is analyzed. The equations describing the propagation of the forward- and counter-propagating waves in such an inhomogeneous medium are derived. Quasi-phase conjugation is demonstrated in the case of superluminal inhomogeneities. The Bragg resonance conditions are formulated and the conditions for increasing the reflection coefficient of radiation from an inhomogeneity are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The inversion of VLF-LF sounder data to obtain D-region electron-density distributions

The direct problem is to compute reflection coefficients for an assumed electron-density profile, using a full-wave solution. The inverse problem is treated numerically, using derivatives of the reflection matrix with respect to model parameters. A technique for the rapid computation of the derivatives is described. An algorithm for determining resolution in the profile is discussed.

Shellman, C. H.↗

Coaxial microwave electrothermal thruster performance in hydrogen

The microwave electro thermal thruster (MET) is an electric propulsion concept that offers the promise of high performance combined with a long lifetime. A unique feature of this electric propulsion concept is its ability to create a microwave plasma discharge separated or floating away from any electrodes or enclosing walls. This allows propellant temperatures that are higher than those in resistojets and reduces electrode and wall erosion. It has been demonstrated that microwave energy is coupled into discharges very efficiently at high input power levels. As a result of these advantages, the MET concept has been identified as a future high power electric propulsion possibility. Recently, two additional improvements have been made to the coaxial MET. The first was concerned with improving the microwave matching. Previous experiments were conducted with 10-30 percent reflected power when incident power was in excess of 600 W(exp 6). Power was reflected back to the generator because the impedance of the MET did not match the 50 ohm impedance of the microwave circuit. To solve this problem, a double stub tuning system has been inserted between the MET and the microwave power supply. The addition of the double stub tuners reduces the reflected power below 1 percent. The other improvement has prepared the coaxial MET for hydrogen experiments. To operate with hydrogen, the vacuum window which separates the coaxial line from the discharge chamber has been changed from teflon to boron nitride. All the microwave energy delivered to the plasma discharge passes through this vacuum window. This material change had caused problems in the past because of the increased microwave reflection coefficients associated with the electrical properties of boron nitride. However, by making the boron nitride window electrically one-half of a wavelength long, power reflection in the window has been eliminated. This technical note summarizes the experimental performance of the improved coaxial MET when operating in nitrogen, helium, and hydrogen gases.

Richardson, W.↗

A reflection ansatz for surfaces with electrically small radii of curvature

Uniform reflection coefficients are developed for two- and three-dimensional, edge-like, perfectly conducting surfaces in the deep lit region. The uniformity is with respect to the electrical size of the radii of curvature at the surface's specular point. This uniformity allows one to physically interpret the reflected field from a smooth surface as one of the radii of curvature approaches zero as a diffracted field. The coefficients are heuristically generated from the exact scattered field for a two dimensional parabolic cylinder with plane wave illumination. The significant variables in this solution are the radii of curvature at the specular point and the distance between the specular point and the incident shadow boundaries in the principal planes. The field prediction accuracy of these reflection cofficients are critically examined through comparisons with reflected fields extracted from scattered fields of canonical surfaces.

Dominek, Allen K.↗

Reflection of radio waves by sporadic-E layers

A full-wave analysis of the reflection coefficient is developed and applied to electron-density profiles of midlatitude sporadic-E layers observed by rocket-borne probes. It is shown that partial reflection from the large electron-density gradients at the upper and lower boundaries of sporadic-E layers does not account for the partial transparency observed by ionosondes.

Miller, K. L.↗

X-Band Active-Passive Rf Pulse Compressor with Plasma Switches

As proposed by SLAC, the efficiency of a pulse compressor of the SLED-II type could be increased by changing both the phase of the microwave source and the coupling coefficient of the delay line. In the existing SLED-II system at frequency 11.4 GHz, the resonant delay line is coupled with the source via an iris with a constant reflection coefficient. Replacement of the iris with an active component makes it possible to create an active SLED-II system. In this paper, the use of plasma switches as the active elements is discussed. Plasma switches have been developed and tested at a high-power level for production of flattop compressed pulses. Active switching of SLED-II has demonstrated a marked increase in efficiency (by 20%) and power gain (by 37%) as compared with passive switching. The active compressor has produced 173 ns rf flattop output pulses with a power of about 112 MW.

43 PARTICLE ACCELERATORS↗

Zn migration during spark plasma sintering of thermoelectric Zn{sub 4}Sb{sub 3}

The phase homogeneity of spark plasma sintered thermoelectric Zn{sub 4}Sb{sub 3} pellets along the pressing direction has been studied by potential Seebeck microprobe scanning and spatially resolved x-ray diffraction. Significant variations in the Seebeck coefficient reflect presence of different crystalline phases. The emergence of the ZnSb phase at the bottom of the pellet and metallic Zn impurity at the top explains the variation in the Seebeck coefficients. Quantitative phase distributions along the pressing axis were determined from the Rietveld refinements of spatially resolved x-ray diffraction patterns. These reveal a migration of highly mobilized Zn atoms under the direct current applied during spark plasma sintering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modified Korteweg-de Vries soliton reflection in a magnetized plasma with dust grains and trapped electrons

This article aims at studying the reflection of solitons in an inhomogeneous magnetized warm plasma having dust grains with positive or negative charge and trapped electrons (low temperature nonisothermal electrons). In order to study the soliton reflection, a coupled modified Korteweg-de Vries equation is derived and solved along with the use of incident soliton solution. The expressions for the reflected soliton amplitude, width, and reflection coefficient are obtained, and examined under different parameter regimes. The combined effect of the dust grain density with their charge polarity and trapping of the electrons is largely studied on the soliton reflection characteristics under the influence of magnetic field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Transmission and reflection of compressive waves at a nonmagnetic-magnetic interface

The transmission and reflection properties of compressive waves at a plane interface between uniform nonmagnetic and magnetic regions in the absence of gravity are examined. Using stereographic polar projection, these properties are presented as functions of the two angles determining the direction of incidence. It is shown that the reflection coefficient and the direction of propagation of the transmitted wave are dependent on the direction of propagation of the incident wave for several representative parametric values. It is found that the incident, reflected, and transmitted wavenumber vectors always lie in the same plane, although the group velocity of the transmitted wave does not always lie in this plane. When the transmitted wave is a fast mode, there is generally weak reflection.

Abdelatif, Toufik E.↗

High-frequency techniques for RCS prediction of plate geometries and a physical optics/equivalent currents model for the RCS of trihedral corner reflectors, parts 1 and 2

Formulations for scattering from the coated plate and the coated dihedral corner reflector are included. A coated plate model based upon the Uniform Theory of Diffraction (UTD) for impedance wedges was presented in the last report. In order to resolve inaccuracies and discontinuities in the predicted patterns using the UTD-based model, an improved model that uses more accurate diffraction coefficients is presented. A Physical Optics (PO) model for the coated dihedral corner reflector is presented as an intermediary step in developing a high-frequency model for this structure. The PO model is based upon the reflection coefficients for a metal-backed lossy material. Preliminary PO results for the dihedral corner reflector suggest that, in addition to being much faster computationally, this model may be more accurate than existing moment method (MM) models. An improved Physical Optics (PO)/Equivalent Currents model for modeling the Radar Cross Section (RCS) of both square and triangular, perfectly conducting, trihedral corner reflectors is presented. The new model uses the PO approximation at each reflection for the first- and second-order reflection terms. For the third-order reflection terms, a Geometrical Optics (GO) approximation is used for the first reflection; and PO approximations are used for the remaining reflections. The previously reported model used GO for all reflections except the terminating reflection. Using PO for most of the reflections results in a computationally slower model because many integrations must be performed numerically, but the advantage is that the predicted RCS using the new model is much more accurate. Comparisons between the two PO models, Finite-Difference Time-Domain (FDTD) and experimental data are presented for validation of the new model.

Balanis, Constantine A.↗

Antarctic surface reflectivity calculations and measurements from the ANITA-4 and HiCal-2 experiments

We report that the balloon-borne HiCal radio-frequency (RF) transmitter, in concert with the ANITA radio-frequency receiver array, is designed to measure the Antarctic surface reflectivity in the RF wavelength regime. The amplitude of surface-reflected transmissions from HiCal, registered as triggered events by ANITA, can be compared with the direct transmissions preceding them by O(10) microseconds, to infer the surface power reflection coefficient R. The first HiCal mission (HiCal-1, Jan. 2015) yielded a sample of 100 such pairs, resulting in estimates of R at highly glancing angles (i.e., zenith angles approaching 90°), with measured reflectivity for those events which exceeded extant calculations [P. W. Gorham et al., Journal of Astronomical Instrumentation, 1740002 (2017)]. The HiCal-2 experiment, flying from December 2016–January 2017, provided an improvement by nearly 2 orders of magnitude in our event statistics, allowing a considerably more precise mapping of the reflectivity over a wider range of incidence angles. We find general agreement between the HiCal-2 reflectivity results and those obtained with the earlier HiCal-1 mission, as well as estimates from Solar reflections in the radio-frequency regime [D. Z. Besson et al., Radio Sci. 50, 1 (2015)]. In parallel, our calculations of expected reflectivity have matured; herein, we use a plane-wave expansion to estimate the reflectivity R from both a flat, smooth surface (and, in so doing, recover the Fresnel reflectivity equations) and also a curved surface. Lastly, multiplying our flat-smooth reflectivity by improved Earth curvature and surface roughness corrections now provides significantly better agreement between theory and the HiCal-2 measurements.

47 OTHER INSTRUMENTATION↗

On eigensolutions for discontinuous liners in a duct containing uniform mean flow

Sound attenuation in a rectangular acoustically lined duct containing uniform mean flow is analytically investigated using the generalized Wiener-Hopf technique. Uniqueness of the solution is enforced for lined sections of the finite axial extent by imposing edge conditions at the liner interface. Possible edge conditions are considered, including the Kutta condition, and the causal solution corresponding to edge conditions is considered the best choice. Solution methods such as the mode matching and singularity methods imply differing edge conditions, and results show that power attenuation is insensitive to the imposed edge conditions, although significant differences are observed for the reflection coefficient. The amplitude of the exponentially increasing instability mode in the lined section must be set to zero as a first approximation to the nonlinear situation, and results indicate that measurements of the reflection factor can be used to make a more definite decision about physically appropriate edge conditions.

Koch, W.↗

Collection efficiency measurements for solar cell research

A system was established for measuring absolute, spectral collection efficiency that is well suited to solar cell research and development. Determination of spectral collection efficiency involves measurements of the incident photon intensity, the device reflection coefficient, and the cell short circuit current. A monochromatic photon flux is obtained with a high intensity Bausch and Lomb monochromator, and an Epply thermopile detector is used to measure incident intensity. Normal incidence reflectivity measurements are achieved with a prism type beam splitter. The experimental approach is discussed, measurements of the reflectivity of evaporated silver films are considered. Collection efficiency measurements of silicon solar cells are presented, and collection efficiency studies of Cu20 solar cells are discussed.

Hampton, H. L.↗

Stress wave attenuation in thin structures by ultrasonic through-transmission

The steady state amplitude of the output of an ultrasonic through transmission measurement is analyzed and the result is given in closed form. Provided that the product of the input and output transduction ratios; the specimen-transducer reflection coefficient; the specimen-transducer phase shift parameter; and the material phase velocity are known, this analysis gives a means for determining the through-thickness attenuation of an individual thin sample. Multiple stress wave reflections are taken into account and so signal echoes do not represent a difficulty. An example is presented for a graphite fiber epoxy composite (Hercules AS/3501-6). A direct method for continuous or intermittent monitoring of through thickness attenuation of plate structures which may be subject to service structural degradation is provided.

Lee, S. S.↗