Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REDOX REACTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Fluorination effect for stabilizing cationic and anionic redox activities in cation-disordered cathode materials

We see that cation-disordered Li-excess cathodes with oxygen redox reactions are promising candidates for high-energy-density Li ion batteries. Nevertheless, the oxygen redox process that is required for the high capacity often comes with the oxygen loss, which leads to severe capacity degradation and voltage decay. In this work, we have successfully synthesized a series of Li-excess cation-disordered cathodes (Li 1.2 Mn 0.4+x Ti 0.4-x O 2-x Fx) (0 ≤ x ≤ 0.2) with different fluorine (F) contents. The electrochemical performance results show that the Li 1.2 Mn 0.55 Ti 0.25 O 1.85 F 0.15 (LMTOF0.15) exhibits the highest reversible capacity (275 mAh g -1 , under 30 mA g -1 ), cyclability, and voltage retentions. The mapping of resonant inelastic X-ray scattering (mRIXS) and differential electrochemical mass spectroscopy (DEMS) results reveal that the fluorination enhances the reversible lattice oxygen redox reaction while suppressing irreversible gas release and surface reactions. The X-ray Absorption Spectroscopy (XAS) during the initial two cycles shows that F-substitution alleviates the reduction of the Mn valence state during the whole (dis)charge processes in the bulk and at the surface of the material, results in higher average discharge voltage. In addition, the introduction of F improves the structural stability and suppresses local lattice distortion of the material. Therefore, LMTOF 0.15 is able to cycle with smaller polarization, less interfacial side reaction and Mn dissolution, and therefore results in enhanced cyclability. This work provides a comprehensive understanding of the fluorination effect on the cationic and anionic redox activities in cation-disordered Li-excess cathodes.

25 ENERGY STORAGE↗

Cationic and Anionic Redox of Battery Cathodes Investigated by Advanced Synchrotron‐Based Mapping of Resonant Inelastic X‐ray Scattering

Abstract Redox reaction builds the foundation stone for the energy density of rechargeable battery cathodes. Probing and understanding the redox reaction behavior is crucial, but also extremely formidable, which requires individual and reliable detection of cationic and anionic redox states. Fortunately, the recently developed ultra‐high‐efficiency mapping of resonant inelastic X‐ray scattering (mRIXS) has emerged as a powerful tool to probe the battery chemistry states. Here, the latest advances of employing advanced mRIXS is summarized to investigate the cationic and anionic redox mechanism of battery cathodes during electrochemical operation. Owing to the new dimension of information along the emission energy and high sensitivity to valence 3d states, 3d transition‐metal L ‐edge (TM‐ L ) mRIXS can eliminate the lineshape distortion in conventional 3d TM‐ L fluorescence X‐ray absorption spectra and investigate the cationic redox quantitatively. Moreover, O‐ K mRIXS could fingerprint the intrinsic oxidized lattice oxygen states and quantify the oxygen redox (OR) reversibility, thus demystifying the controversy in traditional wisdom. In addition, different modification strategies coupled with underlying mechanisms for regulating the activity and reversibility of OR utilizing mRIXS are also summarized. This review provides valuable guidance for further exploration of underlying reaction mechanisms of battery cathodes by mRIXS, along with both technological and scientific improvements.

Cheng, Chen↗

Determination of the Moessbauer parameters of rare-earth nitroprussides: Evidence for new light-induced magnetic excited state (LIMES) in nitroprussides

Nitroprussides of the rare-earth elements and some mixed rare-earth-sodium nitroprussides are studied by Moessbauer spectroscopy at ambient and lower temperatures. The high precision Moessbauer measurements reveal fine changes in the electronic configurations of the nitroprusside anions. A small increase of the quadrupole splitting reveals charge polarization effects in the nitroprusside anion caused by the oblate or prolate shape of the rare-earth ion and the lanthanide contraction. Despite the very large magnetic moment of holmium a magnetic phase transition is not observed down to 300 mK. The population of the metastable states SI and SII are evidenced in europium and scandium nitroprussides, and most likely they can be populated in all rare-earth nitroprussides. No distinct correlation between the Moessbauer parameters and the decay temperatures T{sub c} of the metastable states are found. In a very thin surface layer strong color change, which remains stable at room temperature, is detected. A quadrupole doublet with Moessbauer parameters typical for Fe(III), low spin S=1/2 state is related to a new colored photoproduct. The photoproduct is called light-induced magnetic excited state (LIMES) and explained with a photochemical redox reaction, which changes the valence, spin, and magnetic state of 4f-3d bimetallic complexes. - Graphical abstract: Rare-earth nitroprussides are studied by Moessbauer spectroscopy. Population of metastable states in a thin surface layer, and another state which remains stable at room temperature, are detected. The latter is a photoproduct which is called light-induced magnetic excited state (LIMES) and explained with a photochemical redox reaction, which changes the valence, spin, and magnetic state of 4f-3d bimetallic complexes.

36 MATERIALS SCIENCE↗

The Evaluation of Chemical Decontamination for Contaminated Carbon Steel Scrap by Multiphase Treatment Process - 20249

There is a significant growth in the field of decommissioning of nuclear facilities due the fact that for a lot of them their end of life is nearing. In Taiwan, the government plans to steadily reduce the dependence on nuclear power and moves gradually towards a nuclear-free homeland. Therefore, the development of decommissioning technology becomes the significant issue for the next coming years. The decommissioning of a nuclear power plant is a long process and practical work including radiological surveys, decontamination, dismantling, and the subsequent waste management. Chemical decontamination is an important task in the decommissioning of nuclear power plants and is usually performed by circulating the chemical solution in selected systems or full systems in order to reduce dose levels. However, the decontamination of segmented metal parts is also considered to reduce the contamination to such levels that they may be disposed of at a lower classification or be unconditionally released, and it helps to achieve the goal of waste minimization and provide a more economical cost for disposal management. Chemical decontamination technology is used to remove the contaminated oxides deposited on the surface of metals by dissolving them with chemical mechanisms, such as chelation, acidic or alkaline dissolution, redox reaction and so on. Carbon steel is the major material used in systems and pipelines in the nuclear power plant, thus it is also commonly selected as the target to be decontaminated in the decommissioning process. In this study, the effectiveness of chemical decontamination is evaluated by using multiphase treatment process including the reduction and the oxidation steps. In the step of redox reaction, the oxidation state of the substance is very important. Especially metals of some oxidation states show solubility in water, which has a decisive influence on the chemical decontamination. The experiment of decontamination of metal scraps is carried out by the immersion method within a chemical solution. The relative operation parameters such as temperature, pH, and concentration of the chemical solution are recorded to demonstrate the effect of the decontamination process. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Surface Redox Pseudocapacitance of Partially Oxidized Titanium Carbide MXene in Water-in-Salt Electrolyte

Achieving pseudocapacitive intercalation in MXenes with neutral aqueous electrolytes and driving reversible redox reactions is scientifically appealing and practically useful. Here, we report that the partial oxidation of MXene intensifies pseudocapacitive Li + intercalation into Ti 3 C 2 T x MXene from neutral water-in-salt electrolytes. An in situ X-ray absorption near-edge structure analysis shows that the Ti oxidation state changes during the Li+ intercalation, indicating the presence of a surface redox reaction. The Ti oxidation/reduction is further confirmed by an in situ extended X-ray absorption fine structure analysis, which shows a reversible contraction/expansion of the Ti–C interatomic distance. The intensified Li + pseudocapacitive intercalation can be explained by the higher oxidation state of Ti at the open circuit potential. Furthermore, this work demonstrates the possibility of tuning the pseudocapacitive intercalation by adjusting the initial oxidation state of the transition metal on the MXene and offers a facile way to enhance the pseudocapacitance of various MXenes.

36 MATERIALS SCIENCE↗

Chloride ion-doped polypyrrole nanocomposite as cathode material for rechargeable magnesium battery

Highlights: • Chloride ion-doped polypyrrole nanocomposite is firstly developed as new cathode for rechargeable magnesium battery. • Reversible redox reactions of nitrogen species in nanostructured polypyrrole in RMB system are proved. • More than 95 mAh g{sup −1} capacity and a high Coulombic efficiency of about 96% are delivered. - Abstract: We report a chloride ion-doped polypyrrole/carbon nanotube (PPyCl/CNTs) nanocomposite as new cathode material for rechargeable magnesium battery. The PPyCl/CNTs nanocomposite with amorphous structure, uniform chlorine distribution and large specific surface area shows reversible electrochemical energy storage upon redox reaction of nitrogen species. The structural configuration of PPyCl by the incorporation of CNTs contributes to significant improvement in the electrochemical performance. More than 95 mAh g{sup −1} capacity and a high Coulombic efficiency of about 96% are delivered. This study offers a promising way for designing new cathode for rechargeable magnesium batteries.

25 ENERGY STORAGE↗

Stabilizing Anionic Redox Chemistry in a Mn-Based Layered Oxide Cathode Constructed by Li-Deficient Pristine State

Li-rich cathode materials are of significant interest for coupling anionic redox with cationic redox chemistry to achieve high-energy-density batteries. However, lattice oxygen loss and derived structure distortion would induce serious capacity loss and voltage decay, further hindering its practical application. Herein, a novel Li-rich cathode material, O3-type Li 0.6 [Li 0.2 Mn 0.8 ]O 2 , is developed with the pristine state displaying both a Li excess in the transition metal layer and a deficiency in the alkali metal layer. Benefiting from stable structure evolution and Li migration processes, not only can high reversible capacity (≈329 mAh g -1 ) be harvested but also irreversible/reversible anionic/cationic redox reactions are comprehensively assigned via the combination of in/ex situ spectroscopies. Furthermore, irreversible lattice oxygen loss and structure distortion are effectively restrained, resulting in long-term cycle stability (capacity drop of 0.045% per cycle, 500 cycles). Altogether, tuning the Li state in the alkali metal layer presents a promising way for modification of high-capacity Li-rich cathode candidates.

anionic redox reactions↗

Structure, Charge Distribution, and Electron Hopping Dynamics in Magnetite (Fe3O4) (100) Surfaces from First Principles

For the purpose of improving fundamental understanding of the redox reactivity of magnetite, quantum mechanical calculations were applied to predict Fe2+ availability and electron hopping rates at magnetite (100) surfaces, with and without the presence of adsorbed water. Using a low free energy surface reconstruction (½ Fetet layer relaxed into the Feoct (100) plane), the relaxed outermost layer of both the hydrated and vacuum-terminated surfaces were found to be predominantly enriched in Fe2+ within the octahedral sublattice, irrespective of the presence of adsorbed water. At room temperature, mobile electrons move through the octahedral sublattice by Fe2+-Fe3+ valence interchange small polaron hopping, calculated at 1010-1012 hops/second for bulk and bulk-like (i.e. near-surface) environments. This process is envisioned to control sustainable overall rates of interfacial redox reactions. These rates decrease by up to three orders of magnitude (109 hops/second) at the (100) surface, and no significant difference is observed for vacuum-terminated versus hydrated cases. Slower hopping rates at the surface appear to arise primarily from larger reorganization energies associated with octahedral Fe2+-Fe3+ valence interchange in relaxed surface configurations, and secondarily on local charge distribution patterns surrounding Fe2+-Fe3+ valence interchange pairs. These results suggest that, with respect to the possibility that the rate and extent of surface redox reactions depend on Fe2+ availability and its replenishment rate, bulk electron hopping mobility is an upper-limit for magnetite and slower surface rates may need to be considered as potentially rate-limiting. They also suggest hopping mobilities in magnetite nanoparticles may be slower than for bulk single crystals, towards time-scales amenable to Fe2+-Fe3+ site discrimination by conventional spectroscopic probes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Synthesis, structures and photocatalytic activities of microcrystalline ABi{sub 2}Nb{sub 2}O{sub 9} (A=Sr, Ba) powders

Microcrystalline ABi{sub 2}Nb{sub 2}O{sub 9} (A=Sr, Ba) photocatalysts were successfully synthesized by a citrate complex method. The as-prepared samples were characterized by the X-ray diffraction technique, BET surface area analysis, UV-vis diffuse reflectance spectrum, transmission electron microscopy, X-ray photoelectron spectroscopy and inductively coupled plasma-atomic emission spectrometry. The results indicated that single-phase orthorhombic SrBi{sub 2}Nb{sub 2}O{sub 9} could be obtained after being calcined above 650 {sup o}C, while BaBi{sub 2}Nb{sub 2}O{sub 9} was tetragonal. Based on the diffuse reflectance spectra, the band gaps of the obtained samples were calculated to be around 3.34-3.54 eV. For the photocatalytic redox reaction of methyl orange under UV-light irradiation, SrBi{sub 2}Nb{sub 2}O{sub 9} exhibited higher photocatalytic activity than that of BaBi{sub 2}Nb{sub 2}O{sub 9}. The effects of the crystallinities, BET surface areas and crystal structures of the samples on the photocatalytic activities were discussed in detail. -- Graphical abstract: Aurivillius-type ABi{sub 2}Nb{sub 2}O{sub 9} (A=Sr, Ba) photocatalysts were successfully synthesized by a citrate complex method. SrBi{sub 2}Nb{sub 2}O{sub 9} and BaBi{sub 2}Nb{sub 2}O{sub 9} showed different photocatalytic performances in the redox reaction of methyl orange (MO) under UV-light ({lambda}=254 nm), due to the different crystal structures of ABi{sub 2}Nb{sub 2}O{sub 9} (A=Sr, Ba). Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High electrochemical performance bendable Li secondary batteries based on a three-dimensional metal foam-type current collector

Highlights: • 3D structured metal foam increases the surface area for redox reaction. • 3D structured metal foam enhances the electrical conductivity. • The Ni-Cr alloy foam exhibit a high areal capacity of 3.5 mAh cm{sup −2} at a 0.2C. • The Ni-Cr alloy foam exhibit a low charge transfer resistance of 6 Ω. - Abstract: Bendable lithium secondary batteries have many limitations, including low electrochemical performances and poor mechanical flexibility. Here, we bendable pouch batteries are fabricated using LiFePO{sub 4}/C as the active material and three-dimensional Nickel-Chromium alloy metal foam as the current collector of positive electrodes. The advantages of using the three-dimensional structured metal foam include a high surface area for the redox reaction, high electronic conductivity, and short diffusion length for the lithium ion. We demonstrate the use of bendable lithium secondary batteries with a high areal capacity of about 3.5 mAh cm{sup −2} at C-rate of 0.2, a high capacity retention rate in cycle life behavior, and a greatly low charge transfer resistance of around 6–8 Ω. Moreover, our bendable pouch batteries can be repeatedly bent to radii of 12.5 and 2.5 mm for several hundred times without fractures in the electrode and capacity fading.

36 MATERIALS SCIENCE↗

Conditions for the formation of pure birnessite during the oxidation of Mn(II) cations in aqueous alkaline medium

Birnessite was synthetized through redox reaction by mixing MnO{sub 4}{sup -}, Mn{sup 2+} and OH{sup -} solutions. The Mn(VII): Mn(II) ratio of 0.33 was chosen and three methods were used consisting in a quick mixing under vigorous stirring of two of the three reagents and then on the dropwise addition of the third one. The obtained solids were characterized by XRD, FTIR and XPS spectroscopies. Their average oxidation states were determined from ICP and CEC measurements while their surface properties were investigated by XPS. This study provides an increased understanding of the importance of dissolved oxygen in the formation of birnessite and hausmannite and shows the ways to obtain pure birnessite. The role of counter-ion ie. Na{sup +} or K{sup +} was also examined. - Graphical abstract: Pathways of birnessite formation. - Highlights: • Pure birnessite is prepared through a redox reaction. • Hausmannite formation is prevented by controlling dissolved O2. • The employed counterion influences the purity of birnessite. • Initial Mn(OH){sub 2} is oxidized by both MnO{sub 4}{sup -} and dissolved O{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Plutonium Mobility Studies: 216-Z-9 Trench Sample Analysis Results

A variety of analyses were conducted on selected sediment samples collected from two wells (299 W15-46 and 299-W15-48) drilled near the 216-Z-9 Trench to elucidate the form and potential for Pu and Am to be mobilized under present conditions and those that could be expected in future remediation scenarios. Analyses included moisture content, determination of the less than sand size fraction (silt plus clay), carbon analysis, SEM/EDS analysis, microwave-assisted acid digestions for total element analysis, and extraction tests using Hanford groundwater as the leachate. Results of the extraction tests were used as input to conduct equilibrium geochemical modeling of the solutions with Geochemist’s Workbench®. Geochemical modeling results for Pu were evaluated in terms of recent conclusions regarding the solubility and redox reactions of Pu by Neck et al. (2007a, 2007b). It was found that the highest concentrations of Pu and Am were associated with sediments of low silt/clay content and occur above silt/clay rich layers within the sediment profile. It was also found that the Pu and Am were relatively enriched in the silt/clay portion of these samples. The fact that the highest concentrations of Pu and Am occurred in sediments with low silt/clay contents suggests that waste solutions had perched on top of the low permeability silt/clay rich layers and interactions with the high silt/clay layers was minimal. SEM/EDS analysis indicated that the Pu and Am in these sediments does not occur as discrete micron size particles, and therefore must occur as mononuclear or polynuclear/ nanoclusters size particles adsorbed throughout the sediment samples. Leaching of these samples with Hanford groundwater indicates that release of Pu and Am from the sediments is correlated most significantly with the acidity of the water and not the initial concentrations of Pu and Am in the sediments. Only extracts that were acidic after contact with the sediments (pH 4.3 to 5.4) contained detectable concentrations of extractable Pu and Am. Water extracts from samples containing high concentrations of TBP suggest that if the TBP degradation products DBP and MBP are available in these sediments, they do not significantly increase the extractability of Pu or Am. Geochemical modeling results suggest that the concentrations of Am in water in contact with these sediments is not controlled by the solubility of Am(OH)3(c), but rather by desorption of Am that has been previously adsorbed to the sediments during the period of active wastewater disposal. Sediment extracts that had measureable concentrations of Am only occurred in samples that were fairly acidic (pH 4.3 to 4.6), indicating that Am will remain effectively sequestered to sediments when pH conditions approach those of normal Hanford groundwater (mildly alkaline, ~ pH 8). The geochemical modeling results indicate that Pu in acidic extracts is significantly undersaturated with respect to PuO2(am). However, recent reviews of Pu solubility and redox reactions suggest that the data used for these calculations is incomplete (Neck et al. 2007a, 2007b). The results of Neck et al. (2007a, 2007b) suggest that Pu concentrations in solutions in contact with the 216-Z-9 Trench sediment samples might be controlled by a mixed valent solid phase [(PuV)2x(PuIV)1-2xO2+x(am)] with various dissolved Pu(V) complexes and Pu(IV)O2(am) colloids or nanoclusters being the dominant species in solution for typical Hanford groundwater conditions. Adsorption is likely to have a major impact on the mobility of these species (Neck et al. 2007a, 2007b; Clark et al. 2006; Kaplan et al. 2006; Powell et al. 2005). Further research is planned to verify these hypotheses.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Rescaling of metal oxide nanocrystals for energy storage having high capacitance and energy density with robust cycle life

Significance The combined study of experiments and molecular dynamics simulations demonstrates that metal oxide nanocrystals on graphene can be rescaled into atomic clusters. It is notable that the capacitance of 3,023 F per the mass of NiO, matching the measured capacitance of 2,231 per the total electrode mass, exceeds the theoretical gravimetric capacitance of 2,618 F available via ion-to-atom redox reactions. This approach thus provides a new pathway to realize full capacitance via ion-to-atom Faradaic redox reactions. Furthermore, assembly with a rescaled metal oxide positive electrode shows that further development of high-capacity negative counter electrode materials can pave a new route to address challenging energy storage issues.

Jeong, Hyung Mo↗

Coupling Anionic Oxygen Redox with Selenium for Stable High‐Voltage Sodium Layered Oxide Cathodes

Utilizing anion redox reaction is crucial for developing the next generation of high-energy density, low-cost sodium-ion batteries. However, the irreversible oxygen redox reaction in Na-ion layered cathodes, which leads to voltage fading and reduced overall lifespan, has hindered their practical application. In this study, selenium is incorporated as a synergistic redox active center of oxygen to improve the stability of Na-ion cathodes. The redesigned cathode maintains stable voltage by demonstrating reversible oxygen redox while significantly suppressing the redox activity of manganese. The anionic redox contribution capacity of the selenium-doped Na 0.6 Li 0.2 Mn 0.8 O 2 cathode remains as high as 84% after 50 cycles, while the pristine Na 0.6 Li 0.2 Mn 0.8 O 2 cathode experiences a reduction to 39% of its initial capacity. The X-ray photoelectron spectroscopy data and computational analysis further revealed that selenium doping participates in redox as Se +4/5 which stabilizes the charged state and increases the energy step for O─O dimerization, thus improving the stability and lifespan of Na 0.6 Li 0.2 Mn 0.8 O 2 cathodes. In conclusion, the findings highlight the potential of redox coupling design to address the issue of voltage fade caused by irreversible anionic redox.

25 ENERGY STORAGE↗

Rejuvenating dead lithium supply in lithium metal anodes by iodine redox

Inactive lithium (more frequently called dead lithium) in the forms of solid-electrolyte interphase and electrically isolated metallic lithium is principally responsible for the performance decay commonly observed in lithium metal batteries. A fundamental solution of recovering dead lithium is urgently needed to stabilize lithium metal batteries. In this paper, we quantify the solid-electrolyte interphase components, and determine their relation with the formation of electrically isolated dead lithium metal. We present a lithium restoration method based on a series of iodine redox reactions mainly involving I 3 - /I - . Using a biochar capsule host for iodine, we show that the I 3 - /I - redox takes place spontaneously, effectively rejuvenating dead lithium to compensate the lithium loss. Through this design, a full-cell using a very limited lithium metal anode exhibits an excellent lifespan of 1,000 cycles with a high Coulombic efficiency of 99.9%. We also demonstrate the design with a commercial cathode in pouch cells. Cycling lithium batteries often results in inactive lithium that no longer participates in redox reactions, leading to performance deterioration. Here the authors use an iodic species to react with inactive lithium, bringing it back to life and thus making batteries last longer.

25 ENERGY STORAGE↗

A designed heme-[4Fe-4S] metalloenzyme catalyzes sulfite reduction like the native enzyme

Multielectron redox reactions often require multicofactor metalloenzymes to facilitate coupled electron and proton movement, but it is challenging to design artificial enzymes to catalyze these important reactions, owing to their structural and functional complexity. Here, we report a designed heteronuclear heme-[4Fe-4S] cofactor in cytochrome c peroxidase as a structural and functional model of the enzyme sulfite reductase. The initial model exhibits spectroscopic and ligand-binding properties of the native enzyme, and sulfite reduction activity was improved—through rational tuning of the secondary sphere interactions around the [4Fe-4S] and the substrate-binding sites—to be close to that of the native enzyme. By offering insight into the requirements for a demanding six-electron, seven-proton reaction that has so far eluded synthetic catalysts, this study provides strategies for designing highly functional multicofactor artificial enzymes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metamorphic reactions in mesosiderites - Origin of abundant phosphate and silica

In light of a study of the Emery mesosiderite, it is determined that the high modal abundances of merrillite and tridymite in most mesosiderites are attributable to redox reactions between silicates and P-bearing Fe-Ni metal within a limited T-fO2 range at low pressure. The recalculated amounts of dissolved P and S in the metallic portion of Emery reduce the metal liquidus temperature to less than 1350 C, and the solidus to less than 800 C, so that the mixing of liquid metal with cold silicates would have resulted in silicate metamorphism rather than melting. This redox reaction and redistribution of components between metal and silicates illuminates the complexities of mesosiderite processing, with a view to the recalculation of their original components.

Harlow, G. E.↗

Electrochemical Performance of Mixed Redox-Active Organic Molecules in Redox Flow Batteries

Designing electrolytes based on mixture of different organic redox active molecules brings the opportunity of enhancing the volumetric energy density of flow batteries and removes the requirement of high solubility for individual organic species in the mixture. Here, in the present work, we conduct computational and experimental analysis to investigate the electrochemical performance of mixed redox-active organic molecules. A zero-dimensional transient model is employed to investigate the changes in the half-cell potential and the concentrations and partial currents of individual redox reactions in a mixture of organic molecules over time. The model demonstrates the effects of individual properties of species such as kinetic rate constants, mass transfer coefficients, concentration ratios and standard redox potentials and reports the effect of energy-losing homogenous chemical redox reaction on the voltage efficiency and concentration ratios of the mixed species. Pairs of anthraquinone negolyte species were selected for an experimental case study. A mixture of 2,6-N-TSAQ and 2,6-DHAQ showed 40% increase in the volumetric energy density compared to the performance of 2,6-DHAQ alone. Based on the results of the experimental and computational analysis, we propose guidelines for the design of suitable mixed redox-active organic species.

25 ENERGY STORAGE↗