Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RED SHIFT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10

Dynamics and quantum Zeno effect for a qubit in either a low- or high-frequency bath beyond the rotating-wave approximation

We use a non-Markovian approach to study the decoherence dynamics of a qubit in either a low- or high-frequency bath modeling the qubit environment. This is done for two separate cases: either with measurements or without them. This approach is based on a unitary transformation and does not require the rotating-wave approximation. In the case without measurement, we show that, for low-frequency noise, the bath shifts the qubit energy toward higher energies (blue shift), while the ordinary high-frequency cutoff Ohmic bath shifts the qubit energy toward lower energies (red shift). In order to preserve the coherence of the qubit, we also investigate the dynamics of the qubit subject to measurements (quantum Zeno regime) in two cases: low- and high-frequency baths. For very frequent projective measurements, the low-frequency bath gives rise to the quantum anti-Zeno effect on the qubit. The quantum Zeno effect only occurs in the high-frequency-cutoff Ohmic bath, after counterrotating terms are considered. In the condition that the decay rate due to the two kinds of baths are equal under the Wigner-Weisskopf approximation, we find that without the approximation, for a high-frequency environment, the decay rate should be faster (without measurements) or slower (with frequent measurements, in the Zeno regime), compared to the low-frequency bath case. The experimental implementation of our results here could distinguish the type of bath (either a low- or high-frequency one) and protect the coherence of the qubit by modulating the dominant frequency of its environment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Intramolecular Polarization Contributions to the pKa’s of Carboxylic Acids Through the Chain Length Dependence of Vibrational Tag-Shifts in Cryogenically Cooled Pyridinium-(CH2)n-COOH (n = 1-7) Cations

The pKa’s of acids are known to depend on the ionic strength of an electrolyte solution, an effect that qualitatively results from electrostatic interactions of the acid and conjugate base with proximal ions. Here we explore an intramolecular variation on this theme in which a carboxylic acid group is tethered to a pyridinium cationic charge center with increasingly long alkyl linkages in the series Py+-(CH2)n-COOH, with n = 1-7. The effective acidities of the carboxylic acid group in the isolated cations are determined by recording the red-shifts in the frequencies of the acid OH stretches upon attachment to D2 and N2 molecules, measured by using cryogenic ion spectroscopy. The short chains indeed lead to substantial increases in acidity, with the effect falling off in the range of n = 4-5. The response of the CO stretch on the acid head group is surprisingly strong and, in contrast to the expected red shift of the OH, displays a blue shift as the chain length is reduced. Electronic structure calculations recover these trends and indicate that the proximal cationic charge center acts to draw electron density away from the acid C=O bond. This acts to blue shift the CO stretch while weakening the C-C bond that attaches the head group to the chain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A comparative study of optical absorption and photocatalytic properties of nanocrystalline single-phase anatase and rutile TiO{sub 2} doped with transition metal cations

The effect of nanocrystalline TiO{sub 2} doping with transition metal cations (Cu{sup 2+}, Fe{sup 3+}, Co{sup 2+}, Cr{sup 3+}) on their optical absorption and photocatalytic properties was investigated. The obtained metal-doped TiO{sub 2} samples were characterized by X-ray diffraction, scanning electron microscopy, and UV-vis absorption spectroscopy. It is shown that doping effect on anatase (A) and rutile (R) properties is quite different, being much stronger and complicated on A than on R. Contrary to doped R, doped A revealed a significant red shift of the absorption edge along with the band gap narrowing. Photocatalytic activity of anatase increases upon doping in the order: A R/Co>R/Cu>R/Fe>R/Cr, indicating the inhibitory effect of impurity cations. This fact correlates with the decrease in the UV absorption of the doped rutile in the region of the Hg-lamp irradiation at 4.88 eV. - Graphical abstract: A red shift of the absorption edge of nanocrystalline single-phase anatase after doping with transition metal cations. Highlights: Black-Right-Pointing-Pointer Single-phase anatase and rutile powders surface-doped with transition metal cations. Black-Right-Pointing-Pointer Absorption edge and band gap of rutile do not change with surface doping. Black-Right-Pointing-Pointer Band gap of surface-doped anatase reduces being the lowest for A/Fe. Black-Right-Pointing-Pointer The surface-doping improves photocatalytic activity of anatase. Black-Right-Pointing-Pointer The surface-doping inhibits photocatalytic activity of rutile.

36 MATERIALS SCIENCE↗

Single- and Double-Site Substitutions in Mixed-Metal Oxides: Adjusting the Band Edges Toward the Water Redox Couples

New mixed-metal oxide solid solutions, i.e., the single-metal substituted Na 2 Ta 4–y Nb y O 11 (0 ≤ y ≤ 4) and the double-metal substituted Na 2–2x Sn x Ta 4–y Nb y O 11 (0 ≤ y ≤ 4; 0 ≤ x ≤ 0.35), were investigated and used to probe the impact of composition on their crystalline structures, optical band gaps, band energies, and photocatalytic properties. The Na 2 Ta 4 O 11 (y = 1) phase was prepared by flux-mediated synthesis, while the members of the Na 2 Ta 4–y Nb y O 11 solid solution (1 ≤ y ≤ 4) were prepared by traditional high-temperature reactions. The Sn(II)-containing Na 2–2x Sn x Ta 4–y Nb y O 11 (0 ≤ y ≤ 4) solid solutions were prepared by flux-mediated ion-exchange reactions of the Na 2 Ta 4–y Nb y O 11 solid solutions within a SnCl 2 flux. The crystalline structures of both solid solutions are based on the parent Na 2 B 4 O 11 (B = Nb, Ta) phases and consist of layers of edge-shared BO 7 pentagonal bipyramids that alternate with layers of isolated BO 6 octahedra surrounded by Na(I) cations. Rietveld refinements of the Na 2 Ta 4–y Nb y O 11 solid solution showed that Nb(V) cations were disordered equally over both the BO 7 and BO 6 atomic sites, with a symmetry-lowering distortion from R$\overline{3c}$ to C2/c occurring at ~67–75% Nb (y = ~2.7–3.0). A red-shift in the optical band gaps from ~4.3 to ~3.6 eV is observed owing to a new conduction band edge that arises from the introduction of the lower-energy Nb 4d-orbitals. Reactions of these phases within a SnCl 2 flux yielded the new Na 2–2x Sn x Ta 4–y Nb y O 11 solid solution with Sn-content varying from ~11% to ~21%. However, significant red-shifting of the band gap is found with increasing Nb-content, down to ~2.3 eV for Na 1.4 Sn 0.3 Nb 4 O 11 , because of the higher energy valence band edge upon incorporation of Sn(II) into the structure. Aqueous suspensions of the particles irradiated at ultraviolet–visible energies yielded the highest photocatalytic hydrogen production rates for Na 1.3 Sn 0.35 Ta 1.2 Nb 2.8 O 11 (~124 μmol H 2 ·g –1 ·h –1 ) and Na 1.4 Sn 0.3 Ta 3 NbO 11 (~105 μmol H 2 ·g –1 ·h –1 ), i.e., for the compositions with the highest Sn(II)-content. Further, polycrystalline films show n-type anodic photocurrents under ultraviolet–visible light irradiation. These results show that the valence and conduction band energies can be raised and lowered, respectively, using single-metal and double-metal substituted solid solutions. Furthermore, a novel approach is revealed for achieving smaller visible-light bandgap sizes and a closer bracketing of the water redox couples in order to drive total water splitting reactions that are critical for efficient solar energy conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Amplified Spontaneous Emission from Electron–Hole Quantum Droplets in Colloidal CdSe Nanoplatelets

Two-dimensional cadmium selenide nanoplatelets (NPLs) exhibit large absorption cross sections and homogeneously broadened band-edge transitions that offer utility in wide-ranging optoelectronic applications. Here, we examine the temperature-dependence of amplified spontaneous emission (ASE) in 4- and 5-monolayer thick NPLs and show that the threshold for close-packed (neat) films decreases with decreasing temperature by a factor of 2-10 relative to ambient temperature owing to extrinsic (trapping) and intrinsic (phonon-derived line width) factors. Interestingly, for pump intensities that exceed the ASE threshold, we find development of intense emission to lower energy in particular provided that the film temperature is <= 200 K. For NPLs diluted in an inert polymer, both biexcitonic ASE and low-energy emission are suppressed, suggesting that described neat-film observables rely upon high chromophore density and rapid, collective processes. Transient emission spectra reveal ultrafast red-shifting with the time of the lower energy emission. Taken together, these findings indicate a previously unreported process of amplified stimulated emission from polyexciton states that is consistent with quantum droplets and constitutes a form of exciton condensate. For studied samples, quantum droplets form provided that roughly 17 meV or less of thermal energy is available, which we hypothesize relates to polyexciton binding energy. Polyexciton ASE can produce pump-fluence-tunable red-shifted ASE even 120 meV lower in energy than biexciton ASE. Finally, our findings convey the importance of biexciton and polyexciton populations in nanoplatelets and show that quantum droplets can exhibit light amplification at significantly lower photon energies than biexcitonic ASE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron thermalization and relaxation in laser-heated nickel by few-femtosecond core-level transient absorption spectroscopy

Direct measurements of photoexcited carrier dynamics in nickel are made using few-femtosecond extreme ultraviolet (XUV) transient absorption spectroscopy at the nickel M 2,3 edge. It is observed that the core-level absorption line shape of photoexcited nickel can be described by a Gaussian broadening (σ) and a red shift (ω s ) of the ground-state absorption spectrum. Theory predicts and the experimental results verify that after initial rapid carrier thermalization, the electron temperature increase (ΔT ) is linearly proportional to the Gaussian broadening factor σ, providing quantitative real-time tracking of the relaxation of the electron temperature. Measurements reveal an electron cooling time for 50 nm thick polycrystalline nickel films of 640 ± 80 fs. With hot thermalized carriers, the spectral red shift exhibits a power-law relationship with the change in electron temperature of ω s ∝ ΔT 1.5 . Rapid electron thermalization via carrier-carrier scattering accompanies and follows the nominal 4-fs photoexcitation pulse until the carriers reach a quasithermal equilibrium. Entwined with a <6 fs instrument response function, carrier thermalization times ranging from 34 fs to 13 fs are estimated from experimental data acquired at different pump fluences and it is observed that the electron thermalization time decreases with increasing pump fluence. Here, the study provides an initial example of measuring electron temperature and thermalization in metals in real time with XUV light, and it lays a foundation for further investigation of photoinduced phase transitions and carrier transport in metals with core-level absorption spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced Size Selection in Two-Photon Excitation for CsPbBr 3 Perovskite Nanocrystals

Here, cesium lead bromide (CsPbBr 3 ) perovskite nanocrystals (NCs), with large two-photon absorption (TPA) cross-section and bright photoluminescence (PL), have been demonstrated as stable two-photon-pumped lasing medium. With two-photon excitation, red-shifted PL spectrum and increased PL lifetime is observed compared with one-photon excitation. We have investigated the origin of such difference using time-resolved laser spectroscopies. We ascribe the difference to the enhanced size selection of NCs by two-photon excitation. Because of inherent nonlinearity, the size dependence of absorption cross-section under TPA is stronger. Consequently, larger size NCs are preferably excited, leading to longer excited-state lifetime and red-shifted PL emission. In a broad view, the enhanced size selection in two-photon excitation of CsPbBr 3 NCs is likely a general feature of the perovskite NCs and can be tuned via NC size distribution to influence their performance within NC-based nonlinear optical materials and devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Elucidating the Nanoparticle–Metal Organic Framework Interface of Pt@ZIF-8 Catalysts

Composites of metal nanoparticles encapsulated in metal–organic frameworks (NP@MOFs) have emerged as heterogeneous catalysts for regioselective reactions. While numerous NP@MOF composite combinations have been synthesized, characterization of the nanoparticle–MOF interface and the encapsulated nanoparticle surface have yet to be determined. In this work, Pt@ZIF-8 synthesized by the controlled encapsulation method was chosen as a representative NP@MOF, and in situ characterization methods coupled with density functional theory (DFT) calculations were used to probe the nanoparticle surface. CO adsorption diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) revealed that Pt@ZIF-8 exhibits red-shifted linear- and bridge-bound CO peaks and a linear peak associated with cationic Pt. DFT calculations and 1H NMR suggest that these sites arise from the binding and electronic donation of the MOF linker, 2-methylimidazole, to the Pt surface. DRIFTS under argon reveals that linker fragments may be present on the Pt nanoparticle surface, suggesting a reaction between the nanoparticle and the MOF linker during controlled encapsulation synthesis. Finally, CO oxidation reveals via DRIFTS that the red-shifted linear CO and bridging CO sites are active sites, while the cationic Pt is not. Overall, these results show that Pt@ZIF-8 contains unique Pt surface sites and indicate that the nanoparticle–MOF interface contains a heterogeneous mixture of framework 2-methylimidazole, free-standing 2-methylimidazole, and linker fragments. These findings expose the complex nature of the nanoparticle surface in NP@MOF composites and demonstrate the importance of characterizing their surface to understand their catalytic behavior.

Whitford, Cassandra L. (ORCID:0000000282237516)↗

Coupling between Emissive Defects on Carbon Nanotubes: Modeling Insights

Covalent functionalization of single-walled carbon nanotubes (SWCNTs) with organic molecules results in red-shifted emissive states associated with sp 3 -defects in the tube lattice, which facilitate their improved optical functionality, including single-photon emission. The energy of the defect-based electronic excitations (excitons) depends on the molecular adducts, the configuration of the defect, and concentration of defects. In this work, we model the interactions between two sp 3 -defects placed at various distances in the (6,5) SWCNT using time-dependent density functional theory. Calculations reveal that these interactions conform to the effective model of J-aggregates for well-spaced defects (>2 nm), leading to a red-shifted and optically allowed (bright) lowest energy exciton. H-aggregate behavior is not observed for any defect orientations, which is beneficial for emission. The splitting between the lowest energy bright and optically forbidden (dark) excitons and the pristine excitonic band are controlled by the single-defect configurations and their axial separation. These findings enable a synthetic design strategy for SWCNTs with tunable near-infrared emission.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of highly water soluble tetrabenzoporphyrins and their application toward photodynamic therapy

Novel tetraaryl-(pyridinium-4-yl)-tetrabenzoporphyrins have been successfully synthesized via a Heck-based sequence reaction. These tetrabenzoporphyrins were substituted with eight pyridyl groups at the fused benzene rings. Methylation of the pyridyl groups with methyl iodide afforded highly water soluble tetrabenzoporphyrins carrying eight ionic groups. The extended π-conjugation broadened and red-shifted the absorption band of these porphyrins to 650–750 nm. Furthermore, these cationic tetrabenzoporphyrins showed non-toxicity in the dark up to 100 uM. High phototoxicity with IC 50 values lower than 18 μM were obtained for these tetrabenzoporphyrins.

DFT calculation photosensitizer↗

TiO{sub 2} nanocomposite with reduced graphene oxide through facile blending and its photocatalytic behavior for hydrogen evolution

Graphical abstract: - Highlights: • TRG-COOH nanocomposite as a photocatalyst for hydrogen evolution is prepared. • The reduction of graphene oxide reconstructs a part of conjugated structure. • The band gap is red-shifted due to the reconstruction of conjugated structure. • RG-COOH covered and anchored by P25 blocks the aggregation and the stacking. • The photocatalytic efficiency of TRG-COOH was increased under 500 W Xenon lamp. - Abstract: TRG-COOH nanocomposite is prepared as a photocatalyst for hydrogen evolution by blending TiO{sub 2} with reduced graphene oxide (RG-COOH). TRG-COOH is characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectra, X-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM), and photoluminescent spectra. XPS result shows the reduction of monolayer graphene oxide (GO). The band gap is red-shifted from 3.25 eV for P25, which consists of 20% rutile and 80% anatase, to 2.95 eV for TGO and then to 2.80 eV for TRG-COOH due to the introduction of GO and the reconstruction of conjugated structure. TEM image illustrates that RG-COOH in TRG-COOH is covered and anchored by P25, which blocks the aggregation of TiO{sub 2} nanoparticles and the stacking of monolayer graphene. This allows RG-COOH to take a good role of electron-sink and electron-transporting bridge. The photocatalytic efficiency of TRG-COOH is respectively increased under Xenon lamp about 8.9 and 2.7 times compared to P25 and TGO.

36 MATERIALS SCIENCE↗

HJ-aggregates of donor–acceptor–donor oligomers and polymers

A vibronic exciton model is developed to account for the spectral signatures of HJ-aggregates of oligomers and polymers containing donor–acceptor–donor (DAD) repeat units. In (DAD) N π-stacks, J-aggregate-promoting intrachain interactions compete with H-aggregate promoting interchain interactions. The latter includes Coulombic coupling, which arises from “side-by-side” fragment transition dipole moments as well as intermolecular charge transfer (ICT), which is enhanced in geometries with substantial overlap between donors on one chain and acceptors on a neighboring chain. J-behavior is dominant in single (DAD)N chains with enhanced intrachain order as evidenced by an increased red-shift in the low-energy absorption band along with a heightened A 1 /A 2 peak ratio, where A 1 and A 2 are the oscillator strengths of the first two vibronic peaks in the progression sourced by the symmetric quinoidal–aromatic vibration. By contrast, the positive H-promoting interchain Coulomb interactions operative in aggregates cause the vibronic ratio to attenuate, similar to what has been established in H-aggregates of homopolymers such as P3HT. An attenuated A 1 /A 2 ratio can also be caused by H-promoting ICT which occurs when the electron and hole transfer integrals are out-of-phase. In this case, the A 1 peak is red-shifted, in contrast to conventional Kasha H-aggregates. With slight modifications, the ratio formula derived previously for P3HT aggregates is shown to apply to (DAD) N aggregates as well, allowing one to determine the effective free-exciton interchain coupling from the A 1 /A 2 ratio. Applications are made to polymers based on 2T-DPP-2T and 2T-BT-2T repeat units, where the importance of the admixture of the excited acceptor state in the lowest energy band is emphasized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimal geometries and harmonic vibrational frequencies of the global minima of water clusters (H2O)n, n = 2–6, and several hexamer local minima at the CCSD(T) level of theory

We report the first optimum geometries and harmonic vibrational frequencies for the ring pentamer and several water hexamer (prism, cage, cyclic and two book) at the CCSD(T)/aug-cc-pVDZ level of theory. All five hexamer isomer minima previously reported by MP2 are also minima on the CCSD(T) potential energy surface (PES). In addition, all CCSD(T) minimum energy structures for the n=2-6 cluster isomers are quite close to the ones previously obtained by MP2 on the respective PESs, as confirmed by a modified Procrustes analysis that quantifies the difference between any two cluster geometries. The CCSD(T) results confirm the cooperative effect of the homodromic ring networks (systematic contraction of the nearest-neighbor (nn) intermolecular separations with cluster size) previously reported by MP2, albeit with O-O distances shorter by ~0.02 Å, indicating that MP2 overcorrects this effect. The harmonic frequencies at the minimum geometries were obtained by the double differentiation of the CCSD(T) energy using an efficient scheme based on internal coordinates that reduces the number of required single point energy evaluations by ~15% when compared to the corresponding double differentiation using Cartesian coordinates. Negligible differences between MP2 and CCSD(T) are found for the librational modes, while uniform increases of ~15 and ~25 cm -1 are observed for the bending and “free” OH harmonic frequencies. The largest differences between MP2 and CCSD(T) are observed for the harmonic hydrogen bonded frequencies. The CCSD(T) red shifts from the monomer frequencies (Δω) are smaller than the MP2 ones, due to the fact that the former produces shorter elongations (ΔR) of the respective hydrogen bonded OH lengths from the monomer value with respect to the latter. Both the MP2 and CCSD(T) results for the hydrogen bonded frequencies were found to closely follow the relation - Δω = s · ΔR, with a rate of s = 20.3 cm -1 / 0.001 Å. The CCSD(T) harmonic frequencies, when corrected using the MP2 anharmonicities obtained from second order vibrational perturbation theory (VPT2), produce anharmonicCCSD(T) estimates that are within < 60 cm -1 from the measured infrared (IR) active bands of the n=2-6 clusters and furthermore trace the observed red shifts with respect to the monomer (Δν) quite accurately. The energetic order between the various hexamer isomers on the PES (prism has the lowest energy) previously reported at MP2 was found to be preserved at the CCSD(T) level, whereas the inclusion of anharmonic corrections further stabilizes the cage among the hexamer isomers.

Miliordos, Evangelos↗

Infrared signature of micro-hydration in the organophosphate sarin: An ab initio study

The infrared (IR) spectra of micro-hydrated Sarin•(H 2 O) n clusters containing between one and four explicit waters have been studied using ab initio density functional theory (DFT) methods. The phosphate group P=O bond vibration region (~1270 to 1290 cm –1 ) revealed the largest frequency variation with hydration, with a frequency red shift reflecting the direct hydrogen bond formation between the P=O of Sarin and water. Small variations to the P-F stretch (~810 to 815 cm –1 ) and the C-O-P vibrational modes (~995 to 1004 cm –1 ) showed that the water interactions with these functional groups were minor, and that the structures of Sarin were not extensively perturbed in the hydrated complexes. Increasing the number of explicit hydration waters produced only small vibrational changes in the lowest free energy complexes. These minor changes were consistent with a single water-phosphate hydrogen bond being the dominant structure, though a second water-phosphate hydrogen bond was observed in some complexes and was identified by an additional red shift of the P=O bond vibration. As a result, the H 2 O•H 2 O vibrational modes (~3450 to 3660 cm –1 ) increased in complexity with higher hydration levels and reflect the extended hydrogen bonding networks formed between the explicit waters in the hydrated Sarin clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lanthanide stannate pyrochlores Ln{sub 2}Sn{sub 2}O{sub 7} (Ln = Nd, Sm, Eu, Gd, Er, Yb) nanocrystals: Synthesis, characterization, and photocatalytic properties

Highlights: • Ln{sub 2}Sn{sub 2}O{sub 7} (Ln = Nd, Sm, Eu, Gd, Er, Yb) are synthesized by hydrothermal method. • Light absorption edge shows red shift with decreasing Ln{sup 3+} radius from Nd{sup 3+} to Yb{sup 3+}. • Ln{sub 2}Sn{sub 2}O{sub 7} shows increasing photocatalytic activity with the decease of Ln{sup 3+} radius. • Electronic configuration reaches 4f{sup 14} under light irradiation may decrease photocatalytic activity. • Hydroxyl radicals are detected to be the major reactive species. - Abstract: A series of lanthanide stannate pyrochlores Ln{sub 2}Sn{sub 2}O{sub 7} (Ln = Nd, Sm, Eu, Gd, Er, Yb) nanocrystals have been successfully synthesized via a facile hydrothermal route. With the decrease of Ln{sup 3+} radius, the light absorption edge of the as-prepared Ln{sub 2}Sn{sub 2}O{sub 7} shows a red shift from Nd{sup 3+} to Yb{sup 3+}. Their photocatalytic activities are found to be improved with the decrease of Ln{sup 3+} radius. However, the photocatalytic activity of Yb{sub 2}Sn{sub 2}O{sub 7} is a little lower than Er{sub 2}Sn{sub 2}O{sub 7}, although the Yb{sup 3+} radius is smaller than Er{sup 3+}, which may be attributed to the full-filled electronic configuration (4f{sup 14}) of surface Yb{sup 2+} intermediates (formed by Yb{sup 3+} trapping a photo-excited electron). The crystallite size and surface area play the most important role in determining the activities. Furthermore, hydroxyl radicals are detected to be the major reactive species during the photo-degradation process. Our findings provide insights in the fabrication of highly efficient stannate photocatalysts, thus enlarging the family of photocatalysts available.

36 MATERIALS SCIENCE↗

Photodegradation of aniline by goethite doped with boron under ultraviolet and visible light irradiation

Highlights: {yields} Goethite modified by boron was prepared by sol-gel method in presence of boron acid at the low temperature. {yields} B-goethite has slight red shift in the band gap transition beside their stronger light absorption compared with pristine goethite. {yields} The results showed that semiconductor photocatalytic reaction mechanism should exist in the process of aniline degradation with goethite and B-goethite as photocatalyst. -- Abstract: In the present study, goethite and goethite doped with boron (B-goethite) were employed to detect the presence or absence of semiconductor photocatalytic reaction mechanism in the reaction systems. B-goethite was prepared by sol-gel method in presence of boron acid in order to improve its photocatalystic efficiency under the ultraviolet and visible light irradiation. The optical properties of goethite and B-goethite were characterized by ultraviolet and visible absorption spectra and the result indicated that B-goethite has slight red shift in the band gap transition beside their stronger light absorption compared with pristine goethite. Degradation of aniline was investigated in presence of goethite and B-goethite in aqueous solution. It was found that the B-goethite photocatalyst exhibited enhanced ultraviolet and visible light photocatalytic activity in degradation of aniline compared with the pristine goethite. The photocatalytic degradation mechanism of B-goethite was discussed.

36 MATERIALS SCIENCE↗

Temperature dependence of electronic band transition in Mn-doped SnO{sub 2} nanocrystalline films determined by ultraviolet-near-infrared transmittance spectra

Highlights: Black-Right-Pointing-Pointer The temperature dependence of electronic structures has been investigated by transmittance spectra from 5.3 to 300 K. Black-Right-Pointing-Pointer The optical band gap shows a red shift with increasing Mn composition and decreases with the temperature. Black-Right-Pointing-Pointer The band gap narrowing parameter [E{sub g}(5.3 K)-E{sub g}(300 K)] linearly decreases with the Mn composition. Black-Right-Pointing-Pointer There are two temperature regimes for the Urbach energy. -- Abstract: Mn-doped SnO{sub 2} (SMO) nanocrystalline films with the composition from 2.5 to 12.5% have been prepared on quartz substrates by pulsed laser deposition. The temperature dependence of electronic structures and optical constants in the SMO films have been investigated by transmittance spectra from 5.3 to 300 K. Optical response functions have been extracted by fitting the transmittance spectra in the photon energy range of 0.5-6.5 eV with the Adachi's model. It was found that the absorption edge presents a red-shift trend with increasing Mn composition, and the optical band gap (OBG) is varied between 4.22 and 3.44 eV. Moreover, as the Mn composition increases, the temperature dependence of OBG becomes weaker. The band gap narrowing value [(5.3 K)-(300 K)] has been reduced from 98 to 3 meV and linearly decreases with the Mn composition. The phenomena could be attributed to the transition from low doping level SnO{sub 2} band-like states to Mn-related localized states. Moreover, the Urbach energy shows the degree of the structural disorder, which could be explained by an empirical formulas in different temperature regimes.

36 MATERIALS SCIENCE↗

TiO{sub 2} nanobelts photocatalysts decorated with Bi{sub 2}WO{sub 6} nanocrystals: Preparation and enhanced photocatalytic activity

Highlights: • TiO{sub 2} nanobelts decorated with Bi{sub 2}WO{sub 6} nanocrystals have been prepared. • The introduction of Bi{sub 2}WO{sub 6} nanocrystals can induce red-shift of absorption edge. • The Bi{sub 2}WO{sub 6}/TiO{sub 2} composites show higher photocatalytic activity than TiO{sub 2} nanobelts. • The Bi{sub 2}WO{sub 6}/TiO{sub 2} composites have long-time recyclable ability of photodegradation. - Abstract: In this paper, the controllable preparation of one-dimensional TiO{sub 2} nanobelts decorated with Bi{sub 2}WO{sub 6} nanocrystals based on Ti foils was reported using two-step hydrothermal treatment method. X-ray photoelectron spectroscopy measurement results exhibited the binding energy changes of Ti and O elements, implying the strong adhesion of Bi{sub 2}WO{sub 6} nanocrystals onto the surface of TiO{sub 2} nanobelts. The ultraviolet–visible (UV–vis) absorption spectra showed that the introduction of Bi{sub 2}WO{sub 6} nanocrystals could induce the red-shift of absorption edge and exhibited a broad absorption band in the visible region, which extended the scope of absorption spectrum and help to improve the photocatalytic degradation efficiency. The photocatalytic experiment results revealed that Bi{sub 2}WO{sub 6}/TiO{sub 2} composites possess higher photocatalytic activities toward methyl orange than pure TiO{sub 2} nanobelts. The degradation efficiency of 90% after 5 cycles indicated that the as-prepared composite photocatalysts exhibited excellent long-time recyclable ability for the degradation of contaminants.

36 MATERIALS SCIENCE↗