Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RARE EARTH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

A Novel Continuous Ultrasound-Assisted Leaching Process for Rare Earth Element Extraction: Environmental and Economic Assessment

Rare earth elements (REEs) make up integral components in personal electronics, healthcare instrumentation, and modern energy technologies. REE leaching with organic acids is an environmentally friendly alternative to traditional extraction methods. Our previous study demonstrated that batch ultrasound-assisted organic acid leaching of REEs can significantly decrease environmental impacts compared to traditional bioleaching. The batch method is limited to small volumes and is unsuitable for industrial implementation. This study proposes a novel approach to increase reaction volume using a continuous ultrasound-assisted organic acid leaching method. Laboratory experiments showed that continuous ultrasound-assisted leaching increased the leaching rate (µg/h) 11.3–24.5 times compared to our previously reported batch method. Techno-economic analysis estimates the cost of the continuous approach using commercially purchased organic acids is $\$$9465/kg of extracted REEs and $\$$4325/kg of extracted REEs, using gluconic acid and citric acid, respectively. The sensitivity analysis reveals that substituting commercially purchased organic acids with microbially produced biolixiviant can reduce the process cost by approximately 99% while minimally increasing energy consumption. Environmental assessment shows that most of the emissions stemmed from the energy required to power the ultrasound reactor. We concluded that increased leaching capacity using a continuous ultrasound-assisted approach is feasible, but process modifications are needed to reduce the environmental impact.

54 - ENVIRONMENTAL SCIENCES/GLOBAL CLIMATE CHANGE ↗
DOE OSTI2020

The effect of rare-earth substitution on the Debye temperature of inorganic phosphors

In the quest to predict photoluminescent efficiency in rare-earth substituted inorganic phosphors, research has shown that materials consisting of ordered, rigid crystal structures tend to possess the highest photoluminescent quantum yields. A compound's Debye temperature (Θ D ), which can be calculated using ab initio calculations, is an ideal proxy for quantitatively comparing structural rigidity among different inorganic compounds, allowing potentially efficient phosphors to be selected from large crystal structure databases. However, the high computational cost of these calculations limits estimating Θ D for unsubstituted host crystal structures only. It is assumed that the low substitution concentration of the rare-earth luminescent center does not significantly influence a material's Debye temperature. This work evaluates the validity of this approximation by examining the effect of luminescent center substitution on a host structure's Θ D . Two well-known phosphors, (Y 1– x Ce x ) 3 Al 5 O 12 ( x = 0 – 0.05) and Ba 1-δ Eu δ MgAl 10 O 17 (δ = 0 – 0.15), were synthesized with varying rare-earth concentrations, while Θ D was computationally estimated and then determined by ultrasonic pulse-echo speed-of-sound and low-temperature heat capacity measurements. Overall, the ensuing results provide key implications for using Θ D as a proxy for structural rigidity in substituted inorganic compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Trivalent Rare Earth Adsorption at Phosphonic Acid Monolayers

The increasing need for rare earth separations requires a detailed understanding of trivalent ion behavior at charged aqueous interfaces. Here, neodymium (Nd) adsorption on Langmuir monolayers of octadecylphosphonic acid (ODPA), a single‐chain phosphonic acid capable of double deprotonation, at the air/water interface, is investigated. Combining sum frequency generation (SFG) spectroscopy with X‐ray fluorescence near total reflection (XFNTR), both the interfacial water ordering and ion density are examined. Under ambient conditions, Nd ions induce enhanced deprotonation of ODPA headgroups, leading to interfacial ion densities as high as 1 Nd per 30 Å 2 . This adsorption behavior arises from a complex interplay between direct electrostatic interactions, ion pairing, and hydration effects, which cannot be fully captured by classical Gouy–Chapman–Stern models. These insights into trivalent ion adsorption mechanisms provide a pathway toward more effective separation processes for rare earth metals.

adsorptions↗
DOE OSTI2021

Sustainable Recycling of Rare-Earth Elements from NdFeB Magnet Swarf: Techno-Economic and Environmental Perspectives

Rare-earth elements (REEs) are increasingly susceptible to supply risks due to their limited geographical availability and growing demand in clean energy applications such as neodymium-iron-boron (NdFeB) magnets used in electric vehicles and wind turbines. When NdFeB magnets are produced, 6–73% of swarf is generated during the manufacturing steps. This paper presents an innovative technology that utilizes copper nitrate to dissolve REEs in NdFeB magnet swarf and subsequently recovers ~97% of them as mixed rare-earth oxides (REOs) of purity higher than 99.5%. Techno-economic analysis (TEA) and life cycle assessment (LCA) quantified the economic and environmental impacts of adopting the proposed acid-free dissolution technology, projecting a net profit margin of 12–43% and a global warming impact reduction by up to 73% compared to the prevailing REO production routes in China. As copper nitrate is the single largest contributor to the cost and environmental footprint, recycling of copper nitrate was investigated as well as using alternative copper salts (e.g., copper acetate), revealing significant improvements in TEA and LCA results. Dysprosium was a major revenue source, highlighting the importance of targeting electric vehicle magnets that are rich in dysprosium. As the REO market is volatile, sensitivity analysis was employed to evaluate the profitability of the proposed technology under different REO prices over the last 11 years. Overall, our results confirmed the economic and environmental viability of the proposed technology for sustainable recycling of REEs from the NdFeB magnet swarf.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Coupled Hydrothermal Extraction and Ligand-Associated Swellable Glass Media Recovery of Rare Earth Elements from Coal Fly Ash (Final Report)

Wayne State University (WSU) researchers, in collaboration with the University of California-Los Angeles (UCLA) and Los Alamos National Laboratory (LANL), have successfully developed a new sorbent media used in a process that concentrated the rare earth content in a coal fly ash sample from southeast MI by >350×, resulting in >13 wt% REO powder. The project developed a new DTPA-associated media that was used to concentrate total REEs. This project demonstrated a coupled hydrothermal extraction and solid-liquid recovery process that produced REO powder from raw fly ash while nearly eliminating the use of organic solvents. The project successfully: 1) identified a commercially viable ash supply with >$2.5 M in REO value being deposited monthly, 2) hydrothermally extracted >77% of REEs in coal fly ash (20% more than acid alone), 3) developed a new sorbent media that was used to concentrate REEs, 4) and engineered a process that resulted in a >13 wt% REO powder. The media also demonstrates a selectivity for mid and heavy REEs over Ce and La and the potential for use in separating individual rare earth elements. An invention disclosure for the sorbent media has been filed with WSU and a patent application will be submitted in the near future. The project examined the potential to couple hydrothermal leaching of coal fly ash with the engineering of a custom ligand-associated media to provide an organic solvent-free method of extracting and recovering REEs. Fly ash feedstock was collected from Detroit area coal-fired power plants, characterized for REE content, and subjected to a bench-top batch hydrothermal leaching/dissolution process inside custom-build pressure reactors at Los Alamos National Laboratory (LANL). This process applied a dissolution technique previously developed to process spent nuclear fuel and other nuclear materials. The modified ash was acidified and the resulting leachate was enriched with REEs along with Ca, Al, and Si. Ligands known to be effective in lanthanide/actinide separation were evaluated based on a series of criteria such as selectivity and association to organosilica through hydrophobicity. Batch experiments were conducted to establish the best conditions (e.g., pH, eluent, etc.) and best ligand systems for the effective extraction of REEs from the alkaline feed solution obtained from the hydrothermal leaching process. Once the organosilica-ligand extraction media was developed for REE concentration, an acidic solution was used to back extract and concentrate the REEs into a heavily REE-laden strip solution. The REEs in the strip solution were precipitated with oxalate to produce rare earth oxides.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2022

Peroxide-Selective Reduction of O 2 at Redox-Inactive Rare-Earth(III) Triflates Generates an Ambiphilic Peroxide

Metal peroxides are key species involved in a range of critical biological and synthetic processes. Rare-earth (group III and the lanthanides; Sc, Y, La–Lu) peroxides have been implicated as reactive intermediates in catalysis; however, reactivity studies of isolated, structurally characterized rare-earth peroxides have been limited. Herein, we report the peroxide-selective (93–99% O22-) reduction of dioxygen (O 2 ) at redox-inactive rare-earth triflates in methanol using a mild metallocene reductant, decamethylferrocene (Fc*). The first molecular praseodymium peroxide ([Pr III 2( O 2 2- )(18C6) 2 (EG)2][OTf]4; 18C6 = 18-crown-6, EG = ethylene glycol, - OTf = - O 3 SCF 3 ; 2-Pr) was isolated and characterized by single-crystal X-ray diffraction, Raman spectroscopy, and NMR spectroscopy. 2-Pr displays high thermal stability (120 °C, 50 mTorr), is protonated by mild organic acids [pK a1 (MeOH) = 5.09 ± 0.23], and engages in electrophilic (e.g., oxygen atom transfer) and nucleophilic (e.g., phosphate-ester cleavage) reactivity. Our mechanistic studies reveal that the rate of oxygen reduction is dictated by metal-ion accessibility, rather than Lewis acidity, and suggest new opportunities for differentiated reactivity of redox-inactive metal ions by leveraging weak metal–ligand binding events preceding electron transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Structure-driven development of a biomimetic rare earth artificial metalloprotein

The 2011 discovery of the first rare earth–dependent enzyme in methylotrophic Methylobacterium extorquens AM1 prompted intensive research toward understanding the unique chemistry at play in these systems. This enzyme, an alcohol dehydrogenase (ADH), features a La 3+ ion closely associated with redox-active coenzyme pyrroloquinoline quinone (PQQ) and is structurally homologous to the Ca 2+ -dependent ADH from the same organism. AM1 also produces a periplasmic PQQ-binding protein, PqqT, which we have now structurally characterized to 1.46-Å resolution by X-ray diffraction. This crystal structure reveals a Lys residue hydrogen-bonded to PQQ at the site analogously occupied by a Lewis acidic cation in ADH. Accordingly, we prepared K 142 A- and K 142 D-PqqT variants to assess the relevance of this site toward metal binding. Isothermal titration calorimetry experiments and titrations monitored by UV–Vis absorption and emission spectroscopies support that K 142 D-PqqT binds tightly (Kd = 0.6 ± 0.2 μM) to La 3+ in the presence of bound PQQ and produces spectral signatures consistent with those of ADH enzymes. These spectral signatures are not observed for WT- or K 142 A-variants or upon addition of Ca 2+ to PQQ ⸦ K 142 D-PqqT. Addition of benzyl alcohol to La 3+ -bound PQQ ⸦ K 142 D-PqqT (but not Ca 2+ -bound PQQ ⸦ K 142 D-PqqT, or La 3+ -bound PQQ ⸦ WT-PqqT) produces spectroscopic changes associated with PQQ reduction, and chemical trapping experiments reveal the production of benzaldehyde, supporting ADH activity. By creating a metal binding site that mimics native ADH enzymes, we present a rare earth-dependent artificial metalloenzyme primed for future mechanistic, biocatalytic, and biosensing applications.

Science & Technology - Other Topics↗
DOE OSTI2021

Ultrafast measurements of the interfacial spin Seebeck effect in Au and rare-earth iron-garnet bilayers

We investigate picosecond spin-currents across Au/iron-garnet interfaces in response to ultrafast laser heating of the electrons in the Au film. In the picoseconds after optical heating, interfacial spin currents occur due to an interfacial temperature difference between electrons in the metal and magnons in the insulator. We report measurements of this interfacial longitudinal spin Seebeck effect between Au and rare-earth iron-garnet insulators, i.e. RE 3 Fe 5 O 12 , where RE is Y, Eu, Tb, Tm. By systematically varying the rare-earth element, we modify the total magnetic moment of the iron-garnet. We use time domain thermoreflectance (TDTR) measurements to characterize the thermal response of the bilayer to ultrafast optical heating. We use time-resolved magneto-optic Kerr effect (TR-MOKE) measurements of the Au layer to measure the time-evolution of spin accumulation in the Au film. Replacing Y with other rare-earths enhances the electron-magnon conductance G e-m at the Au iron-garnet interface by as much as a factor of three. The electron-magnon conductance does not follow the trend of either the total magnetization of the iron garnet or the magnetic moment of the rare-earth.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Beneficiation of rare earth elements bearing ancylite

Disclosed herein are methods and systems for recovery of ancylite, a rare earth mineral comprising strontium carbonate, from rare earth ore. In many embodiments, the disclosed methods and systems provide for recovery of greater than 50% of the ancylite from an ancylite containing ore. In many embodiments, the ore is subjected to flotation in the presence of an acid, for example a hydroxamic acid, such as octanohydroxamic acid. The ore may also be subjected to magnetic separation, for example wet high intensity magnetic separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Crystal Growth and Elemental Homogeneity of the Multicomponent Rare-Earth Garnet (Lu 1/6 Y 1/6 Ho 1/6 Dy 1/6 Tb 1/6 Gd 1/6 ) 3 Al 5 O 12

We report high-entropy aluminum garnets were grown as bulk single crystals using the micro-pulling-down method, taking the synthesis of complex ceramics a step further from the conventional preparation of polycrystalline materials. We studied the effects of growth parameters on the elemental distribution in high optical quality crystals of (Lu 1/6 Y 1/6 Ho 1/6 Dy 1/6 Tb 1/6 Gd 1/6 ) 3 Al 5 O 12 containing six cations (yttrium and rare-earths) taken in equimolar amounts. A single garnet structure was confirmed by powder X-ray diffraction. Electron microprobe measurements were obtained to correlate the radial distribution of rare-earth elements with pulling rates and molten zone height. The nature of the elemental distribution in the radial direction was associated with ionic radius: smaller rare-earths concentrated in the center of the crystal, while larger rare-earths segregated toward the outer edge of the cylindrical crystal. Faster pulling rates led to a flattening of the concentration profiles toward the nominal concentration, promoting a more homogeneous radial elemental distribution, while varying the molten zone height did not have a significant effect. The demonstrated success with crystal growth enables the practical availability of single crystals of multicomponent aluminum garnets for further discovery of new phenomena and applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The effect of caustic soda treatment to recover rare earth elements from secondary feedstocks with low concentrations

Caustic soda (NaOH) treatment has enhanced rare earth element (REE) extraction from monazite. Here, this study examined the effectiveness of caustic soda for RE-phosphates with lower concentrations for extraction from coal overburden, an alternative feedstock derived from mining waste. Pourbaix (Eh-pH) diagrams were constructed for La, Ce, Nd, Eu, and Y-PO 4 -H 2 O systems to understand the thermodynamics of NaOH-facilitated acid leaching for low-concentration RE-phosphates and oxides and to elucidate the difference in recoveries among individual REEs. The Eh-pH diagrams indicated that low crystallinity is beneficial for extraction. Nd was thermodynamically most favorable for the extraction process among the five elements examined, and Y was the least promising. Experiments were conducted using three Pennsylvania coal overburden samples to validate the effect of caustic soda on rare earth leaching. The experimental results showed that for NaOH (6 M), a leaching time of 2 h at 125 °C was sufficient to obtain twice the recovery values compared to those without the NaOH treatment. After implementing the caustic soda treatment, a high total REE recovery (>60%), especially for Nd and Pr, could be achieved with diluted HCl and more environmentally friendlier citric acid. The results were similar for both coarse and fine particles. This novel approach is likely to improve the feasibility of REE extraction from coal-associated feedstock in a more environmentally benign manner.

42 ENGINEERING↗
DOE OSTI2023

Design of Multi-Stage Solvent Extraction Process for Separation of Rare Earth Elements

Flowsheet design and stage determination for the separation of rare earth elements (REEs) using solvent extraction (SX) is a challenging task because of the chemical similarity of the REEs. Low separation factors between the elements and complex equilibrium chemistry provide unique challenges to designing an efficient flowsheet for the separation of elements. The multi-stage nature of the SX process adds further complexity, making the assessment of products for a proposed design and stage combination difficult. Therefore, to develop a SX flowsheet, it is essential to quantify the performance for various design and separation conditions. This paper attempts to address the challenge by utilizing an equilibrium and process modeling approach. Results from a bench-scale study performed on a 10 g/L rare earth salt mixture were used in studying the extraction/stripping behavior and developing equilibrium models. DEHPA with TBP as a phase modifier was used as an extractant, while hydrochloric acid was utilized as a stripping agent. The results obtained were used in developing extraction/stripping models, which were integrated into a process framework of a SX train in a Matlab/Simulink environment. The models were programmed as a function block routine and used for developing a flowsheet, which was simulated for differing separation and design conditions. To identify optimum stage combinations, a particle swarm optimization (PSO) routine was developed and implemented for each SX train. Recovery and purity of elements of interest were used as objective function criteria. The stage combination leading to the minimization of the objective function was used to identify the optimum stage combination for a series of SX trains to attempt a balance of purity and recovery. The models and optimization method were implemented to separate a feed mixture containing REEs, which indicated that 99.52 and 85.41 percent purity is achievable for Yttrium and Lanthanum separation using 8-12-3 and 10-3-5 stage combination for loading, scrubbing, and striping. The model also indicated difficult separability between neodymium, praseodymium, and cerium.

Srivastava, Vaibhav (ORCID:0000000212645987)↗
DOE OSTI2022

Quantification of Rare Earth Elements in the Parts Per Million Range: A Novel Approach in the Application of Laser-Induced Breakdown Spectroscopy

This work extends a previous percentage level concentration study of the optical emission spectra for six rare earth elements, europium (Eu), gadolinium (Gd), lanthanum (La), praseodymium (Pr), neodymium (Nd), and samarium (Sm), along with the transition metal, yttrium (Y) using laser-induced breakdown spectroscopy (LIBS). The concentration of these six rare earth elements and yttrium has been attempted for the first time systematically down to parts per million (ppm) concentration levels ranging from 30 to 300 ppm. In this study, the authors have developed multivariate models for each element capable of predicting concentration with acceptable to excellent levels of accuracy. Additionally, partial least squares regression coefficients were used to identify key spectral features able to be used in this lower concentration regime. This study has demonstrated that it is conceivable to quantify the six rare earth elements along with yttrium at low concentrations in the parts per million levels.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Operation and Process Control Development for a Pilot-Scale Leaching and Solvent Extraction Circuit Recovering Rare Earth Elements From Coal-Based Sources

The US Department of Energy in 2010 has identified several rare earth elements as critical materials to enable clean technologies. As part of ongoing research in REEs (rare earth elements) recovery from coal sources, the University of Kentucky has designed, developed and is demonstrating a ¼ ton/hour pilot-scale processing plant to produce high-grade REEs from coal sources. Due to the need to control critical variables (e.g. pH, tank level, etc.), process control is required. To ensure adequate process control, a study was conducted on leaching and solvent extraction control to evaluate the potential of achieving low-cost REE recovery in addition to developing a process control PLC system. The overall operational design and utilization of Six Sigma methodologies is discussed. Further, the application of the controls design, both procedural and electronic for the control of process variables such as pH is discussed. Variations in output parameters were quantified as a function of time. Data trends show that the mean process variable was maintained within prescribed limits. Future work for the utilization of data analysis and integration for data-based decision-making will be discussed.

coal, rare earth elements, pilot plant, automation↗
DOE OSTI2020

Rare earth metals from secondary sources: Review of potential supply from waste and byproducts

Current concerns about lack of diversity in supply of critical metals have spurred research into utilizing domestic sources, particularly from waste streams. Sustainability strategies like urban mining, industrial symbiosis, and the circular economy suggest avenues to realize new supplies of critical metals. In this work we explore the resource and economic potential for extracting rare earth elements (REEs) from industry byproducts (e.g. coal combustion products, red mud) and secondary sources (e.g. waste electronics and light bulbs). Combining materials flow analysis and characterization data, we find that while REE concentrations in waste and byproduct streams are mostly much lower than current REE ores, some secondary sources are richer than ores in high value REEs such as scandium. The quantities of REEs contained in secondary sources could meet current global demand even with low extraction yield rates. Phosphogypsum, coal ash and red mud from aluminum production stand out as promising candidates for recovery due to high concentrations of valuable REEs and sufficient quantities to potentially meet demand. Processes to extract REEs from secondary sources are under development, it is not clear yet which will be profitable at scale and which can be achieved at least environmental impact. This work provides high level guidance on the potential of secondary sources by characterizing quality (concentrations of different rare earths) and quantity (mass of rare earths in global scale wastes and byproducts). This significant first step helps clarify directions for policy and research and development investments.

42 ENGINEERING↗
DOE OSTI2021

Water Interplays during Dysprosium Electrodeposition in Pyrrolidinium Ionic Liquid: Deconvoluting the Pros and Cons for Rare Earth Metallization

The electrochemical production of rare earth metals (REMs) in ionic liquids (ILs) has received much attention as a promising, sustainable and replacement to the molten salt electrolysis. Water additives have been recently suggested as a strategy to overcome the limitations of the ionic liquid process, but without complete assessment of its overall viability for the REMs production. In this regard, a full investigation of water impact on dysprosium (Dy) electrodeposition in pyrrolidinium triflate (BMPyOTf) ionic liquid was carried out. Water introduction was revealed to involve an interplay of implications on the electrodeposition process, including coordination, speciation, reduction pathways, interfacial dynamics, nucleation and metal stability and purity. In highly dry conditions, the reduction occurs at very negative potentials (-3.3V) in a consecutive pathway, resulting in negligible metal electrodeposition (low rate and efficiency) at the electrode surface. Initial water introduction (<30% molar fraction) leads to partitioning of the Dy complex between water and IL coordinated speciation, giving rise to an additional wave at more positive potentials (-2.4V). Probing and quantification of the heterogeneous Dy speciation by spectroscopic analyses enabled the uncovering of the reduction mechanism and accurate evaluation of the mass transport properties. While lowering the reduction thermodynamics, water addition also improved the nucleation, deposition rate and faradaic efficiency. In spite of these benefits, stripping voltammetric analysis also indicated substantial chemical reactivity of the deposited Dy metal with water additives and/or electrolyte components, under extended timescales. Surface characterization of the obtained product confirmed limited Dy metal stability (mostly oxidized/fluorinated) and purity (~60%) in the studied system. Moreover, high water introduction (>30% molar fraction) was shown to trigger a fast hydrogen evolution reaction (HER), downgrading the robustness of system efficiency. We report the overall impact of water additives seems to engender both promoting and mitigating effects on the Dy electrodeposition process, making the case for more innovative strategies to be sought.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Bio-based oxalic acid production in Issatchenkia orientalis enables sustainable rare earth recovery

The growing demand for rare earth elements (REEs) in clean energy and high-tech industries underscores the need for sustainable recovery methods and a reliable supply of processing chemicals. Here, we establish a microbial platform using the acid-tolerant yeast Issatchenkia orientalis SD108 to produce bio-oxalic acid for REE recovery. By introducing an oxaloacetate cleavage pathway and applying metabolic engineering, the engineered strain produces 39.53 g·L -1 oxalic acid at pH 4.0 in fed-batch fermentation. The crude fermentation broth, used without purification, efficiently precipitates over 99% neodymium (Nd), 99% dysprosium (Dy), and 98% lanthanum (La) from individual REE chloride solutions. Recovery from a low-grade ore leachate achieves over 99% total recovery. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) confirm that REE oxalates precipitated with bio-oxalic acid closely resemble those obtained using commercial oxalic acid. Techno-economic analysis (TEA) and life cycle assessment (LCA) further demonstrate that bio-oxalic acid can be produced at a competitive price of $1.79·kg -1 while reducing carbon intensity (CI) by 112% to 63.5% with and without electricity displacement, respectively, relative to the fossil-based benchmark. These results highlight bio-oxalic acid as a green, economically viable alternative to synthetic oxalate for sustainable REE recovery.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Structural incorporation into goethite fractionates rare earth elements

Up to 20% of rare earth elements (REEs) in ion adsorption deposits (IADs) are associated with iron oxide minerals, primarily goethite. Often termed “non-extractable”, goethite-hosted REEs are thought to be structurally incorporated into the mineral lattice. The large mismatch in size and charge density between REEs (ionic radius, r = 0.86–1.03 Å) and Fe 3+ (r = 0.65 Å), however, makes direct substitution energetically unfavorable. To determine REE compatibility with and incorporation into goethite on the atomic level, we used X-ray pair distribution function analysis (PDF) and LIII-edge extended X-ray absorption fine structure (EXAFS) spectroscopy. The compatibility of REEs with goethite and the precursor ferrihydrite (FH) is Lu ≥ Yb ≫ Dy > Nd for both phases. Nd and Dy primarily form secondary amorphous phases, with <30% Nd and Dy incorporated into goethite. In the FH precursor at pH 6.8, Yb and Lu assumed a local REE-OOH like structure with next nearest neighbor Fe. The Yb, Lu, and Nd-FH samples were also matured at ambient conditions for 100 days; despite the presence of only ∼5% goethite, Lu and Yb were 42% and 100% in goethite-like structural environments, respectively, whereas the PDF and EXAFS of Nd showed little evidence of any incorporation. Using ab initio molecular dynamics (AIMD) to model the EXAFS, we determined the presence of protonated Fe vacancies, edge-sharing with structural Lu and Yb, likely helped accommodate these REEs in the goethite structure. Incorporation into Fe oxyhydroxides thus potentially fractionates the REEs during weathering associated with formation of lateritic and ion adsorption deposits.

Mergelsberg, Sebastian T. [Pacific Northwest Natio↗