Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “QUENCHING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

The breakBRD Breakdown: Using IllustrisTNG to Track the Quenching of an Observationally Motivated Sample of Centrally Star-forming Galaxies

The observed breakBRD ("break bulges in red disks") galaxies are a nearby sample of face-on disk galaxies with particularly centrally concentrated star formation: they have red disks but recent star formation in their centers as measured by the D n 4000 spectral index. In this paper, we search for breakBRD analogs in the IllustrisTNG simulation and describe their history and future. We find that a small fraction (~4% at z = 0; ~1% at z = 0.5) of galaxies fulfill the breakBRD criteria, in agreement with observations. In comparison with the mass-weighted parent IllustrisTNG sample, these galaxies tend to consist of a higher fraction of satellite and splashback galaxies. However, the central, non-splashback breakBRD galaxies show similar environments, black hole masses, and merger rates, indicating that there is not a single formation trigger for inner star formation and outer quenching. We determine that breakBRD analog galaxies as a whole are in the process of quenching. The breakBRD state, with its highly centrally concentrated star formation, is uncommon in the history of either currently quiescent or star-forming galaxies; however, approximately 10% of 10 < M*/M⊙ < 10 11 quiescent galaxies at z = 0 have experienced SFR concentrations comparable to those of the breakBRDs in their past. Additionally, the breakBRD state is short lived, lasting a few hundred Myr up to ~2 Gyr. The observed breakBRD galaxies may therefore be a unique sample of outside-in quenching galaxies.

Astronomy & Astrophysics↗
DOE OSTI2022

A Multiwavelength View of IC 860: What Is in Action inside Quenching Galaxies

We present a multiwavelength study of IC 860, a nearby post-starburst galaxy at the early stage of transitioning from blue and star forming to red and quiescent. Optical images reveal a galaxy-wide, dusty outflow originating from a compact core. We find evidence for a multiphase outflow in the molecular and neutral gas phase from the CO position–velocity diagram and NaD absorption features. We constrain the neutral mass outflow rate to be ~0.5 M ⊙ yr -1 , and the total hydrogen mass outflow rate to be ~12 M ⊙ yr -1 . Neither outflow component seems able to escape the galaxy. We also find evidence for a recent merger in the optical images, CO spatial distribution, and kinematics, and evidence for a buried active galactic nucleus in the optical emission line ratios, mid-IR properties, and radio spectral shape. The depletion time of the molecular gas reservoir under the current star formation rate is ~7 Gyr, indicating that the galaxy could stay at the intermediate stage between the blue and red sequence for a long time. Thus the timescales for a significant decline in star formation rate (quenching) and gas depletion are not necessarily the same. Our analysis supports the quenching picture where outflows help suppress star formation by disturbing rather than expelling the gas and shed light on possible ongoing activities in similar quenching galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

SAGAbg. III. Environmental Stellar Mass Functions, Self-quenching, and the Stellar-to-halo Mass Relation in the Dwarf Galaxy Regime

Recent efforts have extended our view of the number and properties of satellite galaxies beyond the Local Group firmly down to M ⋆ ∼ 10 6 M ⊙ . A similarly complete view of the field dwarf population has lagged behind. Using the background galaxy sample from the Satellites Around Galactic Analogs (SAGA) survey at z < 0.05, we take inventory of the dwarf population down to M ⋆ ∼ 5 × 10 6 M ⊙ using three metrics: the stellar mass function (SMF) as a function of environment, the stellar-to-halo mass relation (SHMR) of dwarf galaxies inferred via abundance matching, and the quenched fraction of highly isolated dwarfs. We find that the low-mass SMF shape shows minimal environmental dependence, with the field dwarf SMF described by a low-mass power-law index of α 1 = −1.44 ± 0.09 down to M ⋆ ∼ 5 × 10 6 M ⊙ , and that the quenched fraction of isolated dwarfs drops monotonically to f q ∼ 10 −3 at M ⋆ ∼ 10 8.5 M ⊙ . Though slightly steeper than estimates from H I kinematic measures, our inferred SHMR agrees with literature measurements of satellite systems, consistent with minimal environmental dependence of the SHMR in the probed mass range. Finally, although most contemporary cosmological simulations against which we compare accurately predict the SAGAbg-SMF SHMR, we find that big-box cosmological simulations largely overpredict isolated galaxy quenched fractions via a turnaround in f q (M ⋆ ) at 10 8 ≲ M ⋆ /M ⊙ ≲ 10 9 , underscoring the complexities in disentangling the drivers of galaxy formation and the need for systematic multidimensional observations of the dwarf population across environments.

Kado-Fong, Erin [Yale Univ., New Haven, CT (United↗
NASA NTRS1972

Measurements of O(1 D) quenching rates in the F-region

In-situ determinations of the quenching of O(1 D) atoms by N2 and O2 molecules were made from observations of 6300 A nightglow intensity enhancements produced by the Platteville 1.6 MW transmitter. The heating of F-region electrons near the point of reflection of the RF wave leads to electron impact excitation of oxygen atoms to the O(1 D) state. It is shown that the resulting region of enhance 6300 A emission is localized to the region of electron energy absorption for heating at the lower altitudes. At 225 km the measured time constants for intensity buildup following transmitter turn-on and for intensity decay following turn-off are identical and equal to (13 plus or minus 1) sec. Time constants varying from 30 to 80 sec are found for the altitude range 260 to 300 km. The inferred quenching coefficient for the whole altitude range, 225 to 300 km, is 4.4 + 2 or - 1 x 10 to the minus 11th power cu cm/sec at 950 K, in good agreement with laboratory data. The quenching frequency obtained at 225 km, when referred to the altitude 120 km, is equal to (21 plus or minus 2)/sec, in agreement with less direct ionospheric determinations.

Sipler, D. P.↗
NASA NTRS1974

Strengthening silicon carbide by quenching

Quenching was used to form compressive surface layers in hot-pressed silicon carbide. The presence of the compressive stresses was verified by slotted rod tests. The slotted rod tip deflection was retained at temperatures to at least 1380 C, showing that the stresses are not relieved immediately at elevated temperatures. The flexural strength and impact resistance of specimens quenched from moderate temperatures (2000 C) were increased. Frequently, specimens quenched from higher temperatures were weakened by thermal shock damage.

Gruver, R. M.↗
NASA NTRS1976

A stop-restart solid propellant study with salt quench

Experiments were conducted to gain insight into the unsatisfactory performance of the salt quench system of solid propellants in earlier studies. Nine open-air salt spray tests were conducted and high-speed cinematographic coverage was obtained of the events. It is shown that the salt spray by the detonator is generally a two-step process yielding two different fractions. The first fraction consists of finely powdered salt and moves practically unidirectionally at a high velocity (thousand of feet per second) while the second fraction consists of coarse particles and moves randomly at a low velocity (a few feet per second). Further investigation is required to verify the speculation that a lower quench charge ratio (weight of salt/propellant burning area) than previously employed may lead to an efficient quench

Kumar, R. N.↗
NASA NTRS1985

Quenching Effects on Iron Site Partitioning in the Apollo 17 Orange Glass Composition

Mare petrogenesis and the structure of the lunar interior were studied. Analyses of the spectral signatures of glasses was useful to remote sensing applications in areas of the moon where glass is in significant proportions in the lunar soil. The studies provided information on Fe site occupancies in glasses, which are used to construe oxygen fugacities at the lunar surface. Data were obtained through work on synthetic analogues of lunar glasses. However, recent Mossbauer studies of an Apollo 15 green glass composition have shown that synthetic glasses are extremely sensitive to variations in quenching media. Glass structure and Fe(3+)/Fe(2+) ratios are strongly controlled by quenching conditions, which may mask the effects of the original glass' formation temperature or oxygen partial pressure. Synthetic glasses were often run at low fugacities on Pt wires. The effects of quench media on the Apollo 17 orange glass composition are considered.

Dyar, M. D.↗
NASA NTRS1986

Temperature dependent electronic quenching of OH(A 2 Sigma +, v-prime = 0) between 230 and 310 K

The present study is concerned with the electronic quenching of OH(A 2 Sigma +, v-prime = 0) at and below room temperature, taking into account the use of laser-induced fluorescence (LIF) in a low pressure flow cell for H2, CO2, O2, and N2 colliders. The reasons for the selection of the temperature range and the collision partners are related to the quantitative calibration of OH detection techniques in the troposphere, and to considerations of electronic quenching dynamics. Attention is given to production and rotational distribution, temperature measurements, and temperature dependent quenching rate constants.

Copeland, R. A.↗
NASA NTRS1986

Electronic energy transfer and quenching in copolymers of styrene and 2-(2-prime-hydroxy -5-prime-vinylphenyl)-2H-benzotriazole Photochemical processes in polymeric systems. X

Intensity and lifetime quenching of the polystyrene monomer and excimer fluorescence emission by a pendant quencher have been studied in the solid state and in solution for a series of copolymers of styrene and 2-(2-prime-hydroxy-5-prime-vinylphenyl)-2H-benzotriazole. Two mechanisms of quenching have been identified. One involves interception of the migrating monomer excitation by the quencher, and the other involves a single-step Foerster energy-transfer process from the excimer traps to a quencher. The relative efficiencies of these two quenching mechanisms in the solid state and in solution have been compared and related to the efficiency of electronic energy migration. An estimate of the excimer trap concentration in solid polystyrene is also reported.

Coulter, D. R.↗
NASA NTRS1986

The quenching rate of O(1D) by O(3P)

The rate coefficient for the quenching of O(1D) by O(3P) has recently been calculated by Yee et al. (1985). Their results indicate that quenching by atomic oxygen should not be ignored in the analysis of the 6300 A emission airglow. Data obtained by the Visible Airglow Experiment on board the AE satellites have been reanalyzed to determine the quenching rate of O(1D) by atomic oxygen. The results of this analysis are presented.

Abreu, V. J.↗
NASA NTRS1988

Collisional quenching of cometary emission in the 18 centimeter OH transitions

A model of collisional quenching of the OH 2Pi(3/2) J = 3/2 Lambda doublet in cometary comae is presented. It is found that collisions with ions and electrons in the outer coma have a strong quenching effect on the Swings-effect inversion of the Lambda doublet that is responsible for the OH radio emission at 18 cm wavelength. For the conditions of Halley's comet, collisional quenching should lead radio observers to systematically underestimate the OH parent production rate by a factor of approximately 3 relative to its actual value, and in general, radio-derived production rates should always be less than or equal to UV-derived production rates, which are relatively unaffected by this process. The observation that UV production rates exceed those derived by radio techniques is well known; the direct measurement of this ratio, using a consistent coma model, should provide information about the ion and electron content of the cometary coma.

Schloerb, F. Peter↗
NASA NTRS1990

Quenching of A 2Sigma(+) OH at 300 K by several colliders

Quenching cross sections, sigma(Q), were measured for A 2Sigma(+) OH for a variety of colliders, using the pressure dependence of time-resolved laser-induced fluorescence to obtain quenching cross sections. The OH radicals, produced in a discharge or by photolysis, were maintained in the excited state at 300 K by an Ar buffer bath. It was found that quenching by CF4 and C2F6 the cross sections are very small. For Kr and Ze, the sigma(Q) values were found to be 8 and 27 sq A, respectively. For O2, sigma(Q) was 18 sq A, and for H2O, sigma(Q) was 80 sq A.

Wysong, Ingrid J.↗
NASA NTRS1994

Mechanism of phosphorescence quenching in photomagnetic molecules determined by positron annihilation spectroscopy

Platinum Octaethyl Porphyrin (Pt.OEP) is an efficient phosphor under ultraviolet excitation. The phosphorescent triplet state (T(sub 1)) is readily quenched by the oxygen (O2) molecules. This phenomenon is being utilized as the basis for global air pressure measurements in aerodynamic facilities at various laboratories. The exact mechanism by which O2 molecules quench the (T(sub 1)-S(sub 0)) transitions is still unknown. The diamagnetic S(sub n) singlet states, which feed T(sub 1) states via intersystem crossings, would presumably not be affected by O2. It must be the magnetic T(sub 1) states, which can interact with the paramagnetic O2 molecules, that are affected. However, our positron lifetime and Doppler broadening studies suggest the formation of (S(sub n).02) complexes which can also eventually reduce the population of the T(sub 1) states (i.e. quench phosphorescence). This is possible since higher triplet states in (Pt-OEP) are admixed with the S(sub n) states via spin orbit interactions. The experimental procedures and the results of various measurements are discussed in this paper.

Singh, Jag J.↗
NASA NTRS1994

Mechanism of phosphorescence quenching in photomagnetic molecules determined by positron annihilation spectroscopy

Platinum Octaethyl Porphyrin (Pt.OEP) is an efficient phosphor under ultraviolet excitation. The phosphorescent triplet state (T(sub 1)) is readily quenched by the oxygen (O2) molecules. This phenomenon is being utilized as the basis for global air pressure measurements in aerodynamic facilities at various laboratories. The exact mechanism by which O2 molecules quench the (T(sub 1) - S(sub 0)) transitions is still unknown. The diamagnetic S(sub n) singlet states, which feed T(sub 1) states via intersystem crossings, would presumably not be affected by O2. It must be the magnetic T(sub 1) states, which can interact with the paramagnetic O2 molecules, that are affected. However, our positron lifetime and Doppler broadening studies suggest the formation of (S(sub n) central dot O2) complexes which can also eventually reduce the population of the T(sub 1) states (i.e. quench phosphorescence). This is possible since higher triplet states in (Pt.OEP) are admixed with the S(sub n) states via spin orbit interactions. The experimental procedures and the results of various measurements are discussed in this paper.

Singh, Jag J.↗
NASA NTRS1996

Investigation of Oxygen-Induced Quenching of Phosphorescence in Photoexcited Aromatic Molecules by Positron Annihilation Spectroscopy

Platinum OctaEthyl Porphyrin (Pt.OEP) is an efficient phosphor under ultraviolet excitation. The phosphorescent triplet state P(T(Sup 1)) is readily quenched by the oxygen O2 molecules. This phenomenon is being utilized as the basis for global air pressure measurements in aerodynamic facilities at various laboratories. The exact mechanism by which O2 molecules quench the P(T(Sup 1) approaches P(S(Sub O)) transitions is still unknown. The diamagnetic singlet states P(S(Sub n)), which feed P(T(Sub 1)) states via intersystem crossings, would presumably not be affected by O2. It must be only the magnetic P(T(Sub 1)) states, which can interact with the paramagnetic O2 molecules, that are affected. However, our positron lifetime and Doppler broadening studies suggest the formation of O2P(S(Sub n)), complexes which can also eventually reduce the population of the P(T(Sub 1)) states (i.e., quench phosphorescence). This reduction is possible because higher triplet states in (Pt.OEP) are admixed with the P(S(Sub 1)), states via spin orbit interactions. The experimental procedures and the results of various measurements are presented in this paper.

Singh, Jag J.↗
NASA NTRS1996

The Ultrafine Mineralogy of a Molten Interplanetary Dust Particle as an Example of the Quench Regime of Atmospheric Entry Heating

Melting and degassing of interplanetary dust particle L2005B22 at approx. 1200 C was due to flash heating during atmospheric entry. Preservation of the porous particle texture supports rapid quenching from the peak heating temperature whereby olivine and pyroxene nanocrystals (3 nm-26 nm) show partial devitrification of the quenched melt at T approx. = 450 C - 740 C. The implied ultrahigh cooling rates are calculated at approx. 105 C/h-106 C/h, which is consistent with quench rates inferred from the temperature-time profiles based on atmospheric entry heating models. A vesicular rim on a nonstoichiometric relic forsterite grain in this particle represents either evaporative magnesium loss during flash heating or thermally annealed ion implantation texture.

Rietmeijer, Frans J. M.↗
NASA NTRS2001

The Tensile Properties of Advanced Nickel-Base Disk Superalloys During Quenching Heat Treatments

There is a need to increase the temperature capabilities of superalloy turbine disks. This would allow full utilization of higher temperature combustor and airfoil concepts under development. One approach to meet this goal is to modify the processing and chemistry of advanced alloys, while preserving the ability to use rapid cooling supersolvus heat treatments to achieve coarse grain, fine gamma prime microstructures. An important step in this effort is to understand the key high temperature tensile properties of advanced alloys as they exist during supersolvus heat treatments. This could help in projecting cracking tendencies of disks during quenches from supersolvus heat treatments. The objective of this study was to examine the tensile properties of two advanced disk superalloys during simulated quenching heat treatments. Specimens were cooled from the solution heat treatment temperatures at controlled rates, interrupted, and immediately tensile tested at various temperatures. The responses and failure modes were compared and related to the quench cracking tendencies of disk forgings.

Gabb, Timothy P.↗
NASA NTRS2001

Quench Module Insert Capabilities and Development Test Results

The Quench Module Insert is a directional solidification furnace that will operate in the Materials Science Research Rack (MSRR) on the International Space Station. It will provide high thermal gradient and quench capabilities for processing metals and alloys in microgravity. Numerical analyses and breadboard testing conducted to date show that the QMI can produce an axial temperature gradient approaching 150 C per centimeter in a 1 centimeter diameter aluminum sample with a maximum molten sample temperature of 1100 C. Breadboard testing and analysis have also shown that the quench capabilities of the furnace are sufficient to rapidly solidify at least a 5mm axial portion of a 1 centimeter diameter molten aluminum sample in significantly less than the required 2 seconds and prevent significant backmelt. This paper presents the furnace requirements and capabilities and a status of the associated development testing and analyses.

Carswell, William E.↗