Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Pt durability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

168 records · Page 10
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Mechanical Properties and Durability of "Waterless Concrete"

Waterless concrete consists of molten elementary sulfur and aggregate. The aggregates in lunar environment will be lunar rocks and soil. Sulfur is present on the Moon in Troilite soil (FeS) and by oxidation soil iron and sulfur can be produced. Iron can be used to reinforce the sulfur concrete. Sulfur concrete specimens were cycled between liquid nitrogen (approximately 191 C) and room temperature (approximately 21 C) to simulate exposure to a lunar environment. Cycled and control specimens were subsequently tested in compression at room temperatures (approximately 21 C) and approximately 101 C. Test results showed that due to temperature cycling, compressive strength of cycled specimens was 20% of those non-cycled. Microscopic examination of the fracture surfaces from the cycled samples showed clear de-bonding of the sulfur from the aggregate material whereas it was seen well bonded in those non-cycled. This reduction in strength can be attributed to the large differences in thermal coefficients of expansion of the materials constituting the concrete which promoted cracking. Similar sulfur concrete mixtures were strengthened with short and long glass fibers. The glass fibers from lunar regolith simulant was melted in a 25 cc Pt-Rh crucible in a Sybron Thermoline high temperature MoSi2 furnace at melting temperatures of 1450 to 1600 C for times of 30 min to 1 hour. Glass fibers were cast from the melt into graphite crucibles and were annealed for a couple of hours at 600 C. Glass fibers and small rods were pulled from the melt. The glass melt wets the ceramic rod and long continuous glass fibers were easily hand drawn. The glass fibers were immediately coated with a protective polymer to maintain the mechanical strength. The glass fibers were used to reinforce sulfur concrete plated to improve the flexural strength of the sulfur concrete. Prisms beams strengthened with glass fibers were tested in 4-point bending test. Beams strengthened with glass fiber showed to exhibit an increase in the flexura strength by as much as 45%.

Toutanji, Houssam↗
DOE OSTI2020

Rhombohedral Ordered Intermetallic Nanocatalyst Boosts the Oxygen Reduction Reaction

Low platinum-group-metal (PGM) ordered intermetallic catalysts have been considered one of the most promising candidates for catalyzing the oxygen reduction reaction (ORR) in fuel cells, but achieving the desired performances in terms of activity, durability, and cost is still a grand challenge for the fuel cell research field. While the cubic- and tetragonal-ordered (L1 2 and L1 0 phases) low-PGM nanocatalysts have been investigated extensively and have shown considerably improved durability and activity toward the ORR, so far, little is known about rhombohedral ordered L1 1 catalysts. Here, we report the synthesis of an L1 1 -ordered PtCu catalyst for the ORR. We demonstrate that by applying nitrogen (N) doping through a thermal treatment in an NH 3 gas, the activity and stability of the N-doped, rhombohedral ordered PtCu catalyst can be further enhanced, and the ORR mass and specific activities achieve nearly 5-fold and 4-fold enhancement in acidic media, respectively, relative to those of commercial Pt/C. In situ synchrotron X-ray absorption and pair-distribution-function measurements reveal that both the formation of the ordered intermetallic structure and N-doping synergistically improve the corrosion resistance of the PtCu catalyst by lowering the Cu diffusivity and introduce a compressive strain effect regulating the adsorption of oxygenated species on the Pt surface, thus accounting for the improved ORR kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Effective Corrosion-Resistant Single-Atom Alloy Catalyst on HfO 2 -Passivated BiVO 4 Photoanode for Durable (≈800 h) Solar Water Oxidation

Green hydrogen (H 2 ) production from solar water splitting necessitates photoelectrodes with superior photoelectrochemical (PEC) activity and durability. However, surface defects and photocorrosion instability—especially at high potentials—limit PEC performance and stability. Herein, the prototypical bismuth vanadate (BiVO 4 ) photoanode is used to demonstrate a holistic approach to improve photocurrent density and long-term stability. In this approach, high surface-area nanostructuring of BiVO 4 is combined with barium (Ba) doping with semi-crystalline hafnium oxide (HfO 2 ) surface passivation and single-atom nickel platinum (NiPt) catalysts. The introduction of Ba 2+ ions into BiVO 4 increases the concentration of conductive V 4+ ions or the ratio of V 4+ ions to oxygen vacancies, avoiding V 5+ dissolution during water oxidation. The semi-crystalline HfO 2 , which serves as a passivation layer, prevents BiVO 4 photocorrosion by suppressing harmful chemical reactions when holes are transferred to the electrolyte. The synergistic use of isolated single-atom and Ni-Pt coordination improves charge transfer at the photoanode/electrolyte interface, leading to enhanced PEC kinetics and stability. As a result, a photoelectrode is demonstrated with ≈6.5 mA cm -2 at 1.23 V versus a reversible hydrogen electrode (RHE) and continuous operation for 800 h with a negligible degradation rate. This work provides a promising approach to improve photoanodes for PEC H 2 production.

08 HYDROGEN↗
DOE OSTI2025

CeO 2 Promoted CuO/MgO-Al 2 O 3 Catalyst with Enhanced Activity and Water-Resistance for CO Oxidation

Copper (Cu)-based catalysts have emerged as cost-effective and sustainable alternatives to noble metal systems (e.g., Pt, Pd) for catalytic CO oxidation. However, their practical application is hindered by insufficient low-temperature activity and rapid deactivation under wet conditions containing moisture. To address these challenges, this work introduces CeO 2 -modified CuO/MgO-Al 2 O 3 (Cu-Ce/MA) catalysts, strategically designed to enhance the catalytic performance and water resistance simultaneously. These catalytic materials were evaluated for CO oxidation under both dry and humid conditions, revealing that CeO 2 modification significantly improves the low-temperature activity. Specifically, the optimal catalyst, Cu-30Ce/MA, achieved a 50% CO conversion temperature (T 50 ) of 151 °C, a marked reduction from 218 °C on Cu/MA reference catalyst. Furthermore, the water resistance improves in a CeO 2 content-dependent manner, with higher CeO 2 loadings imparting greater stability in humid environments. Detailed characterizations demonstrate that CeO 2 promotes the dispersion of CuO and stabilizes Cu sites, while also enhancing the low-temperature reducibility and CO adsorption capacity. Crucially, CeO 2 modification suppresses the competitive H 2 O adsorption, mitigating water-induced deactivation. These synergistic effects collectively rationalize the superior activity and durability of Cu-Ce/MA catalysts. By elucidating the dual role of CeO 2 in optimizing Cu-based systems, this study advances the rational design of cost-effective catalysts for real-world CO emission control, particularly under water-rich industrial conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Impact of the Cathode Pt Loading on PEMFC Contamination by Several Airborne Contaminants

Proton exchange membrane fuel cells (PEMFCs) with 0.1 and 0.4 mg Pt cm -2 cathode catalyst loadings were separately contaminated with seven organic species: Acetonitrile, acetylene, bromomethane, iso-propanol, methyl methacrylate, naphthalene, and propene. The lower catalyst loading led to larger cell voltage losses at the steady state. Three closely related electrical equivalent circuits were used to fit impedance spectra obtained before, during, and after contamination, which revealed that the cell voltage loss was due to higher kinetic and mass transfer resistances. A significant correlation was not found between the steady-state cell voltage loss and the sum of the kinetic and mass transfer resistance changes. Major increases in research program costs and efforts would be required to find a predictive correlation, which suggests a focus on contamination prevention and recovery measures rather than contamination mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗