Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Proton Conducting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Quantitative and mechanistic insights into proton dynamics for fast energy storage

Proton conduction in hydrogen-bond-rich protic electrolytes enables fast mass and charge transport, crucial for electrochemical energy storage and power conversion. Such transport can give proton-based batteries exceptional rate capability and low-temperature operation beyond other working ions. Here we show that in phosphoric acid (H 3 PO 4 ) electrolytes, vehicular and structural proton transport coexist, and their contributions to conductivity can be quantitatively distinguished. We link structural diffusion directly to hydrogen-bond strength, enabling the precise tuning of proton migration. Guided by this, we reveal a double conductivity peak from regulated structural diffusion. The optimal electrolyte (5.8-M H 3 PO 4 ) achieves high overall (232.9 mS cm −1 ) and structural (164.9 mS cm−1) conductivity. A MoO 3 ‖CuFe-TBA battery with this electrolyte outperforms a deep-eutectic benchmark (8.3-M H 3 PO 4 ), delivering >17,474 W kg −1 at room temperature and retaining 15.1 Wh kg −1 at −75 °C. These findings provide a framework for designing advanced protic electrolytes across electrochemical systems.

Li, Ziyue [Fudan University, Shanghai (China, Peop↗
DOE OSTI2022

Preactivated zeolite nanosheet plate-tiled membrane on porous PVDF film: Synthesis and study of proton-selective ion conduction

Preactivated MFI zeolite nanosheet plates (ZNPs) with large areas (~2.0 × 2.0 μm 2 ) and nanometer thicknesses (~60 nm) were prepared directly in liquid-dispersed state. The individual ZNP was a stack of 4-nm-thick single crystalline zeolite nanosheets (ZNs) interlinked by Si–O–Si bonds between neighboring ZN surfaces. The dispersed open-pore ZNPs allowed formulating suspensions for tiling ZNP membranes on polymer substrates without requiring post-coating activation. A pinhole-free ZNP-tiled (ZNPT) membrane has been achieved on macroporous PVDF film by a self-repairing vacuum-assisted filtration coating method. The resultant ZNPT layer was ~500 nm-thick consisting of about 7 ZNP layers with inter-ZNP width and inter-ZNP entrance porosity around 9 nm and 2%, respectively. The ZNPT-PVDF membrane exhibited high selectivity to proton transport over vanadyl ion and low resistances to proton conduction in aqueous solutions. The membrane also demonstrated to function as an efficient ion separator for the vanadium redox flow battery. The reported synthesis of preactivated ZNP suspension may overcome the major hurdle to realizing polymer-supported ZN membranes, which is the inefficiency of existing methods in obtaining readily dispersible open-pore ZNs. Finally, the ZNPT-PVDF membrane can be a more affordable and sustainable alternative to the Nafion-based ion separation membranes.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Computationally Assisted Design of Ion-conducting Polymers for Anion Exchange Membrane Fuel Cells (2nd Year Report) [Slides]

Phosphonated polymers have been proposed as proton conductors for fuel cells; however, the anhydride formation of phosphonic acid functional groups lowers proton conductivity and hinders their use in fuel cell applications. We used calculations to support this hypothesis by correlating calculated Gibbs free energies for the formation of the anhydride with pK values of the corresponding acid. The results showed that stronger acids are less likely to form an anhydride even at elevated temperatures and supported the design of a new polymer and the high-temperature proton exchange membrane fuel cell (HT-PEMFC) that outperformed other state-of-the-art HT-PEMFCs.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Direct Alcohol Fuel Cells: A Comparative Review of Acidic and Alkaline Systems

In the last 20 years, direct alcohol fuel cells (DAFCs) have been the subject of tremendous research efforts for the potential application as on-demand power sources. Two leading technologies respectively based on proton exchange membranes (PEMs) and anion exchange membranes (AEMs) have emerged: the first one operating in an acidic environment and conducting protons; the second one operating in alkaline electrolytes and conducting hydroxyl ions. In this review, we present an analysis of the state-of-the-art acidic and alkaline DAFCs fed with methanol and ethanol with the purpose to support a comparative analysis of acidic and alkaline systems, which is missing in the current literature. A special focus is placed on the effect of the reaction stoichiometry in acidic and alkaline systems. Particularly, we point out that, in alkaline systems, OH – participates stoichiometrically to reactions, and that alcohol oxidation products are anions. This aspect must be considered when designing the fuel and when making an energy evaluation from a whole system perspective.

25 ENERGY STORAGE↗
NASA NTRS2016

Solar Powered CO.Sub.2 Conversion

Methods and devices for reducing CO.sub.2 to produce hydrocarbons are disclosed. A device comprises a photoanode capable of splitting H.sub.2O into electrons, protons, and oxygen; an electrochemical cell cathode comprising an electro-catalyst capable of reducing CO.sub.2; H.sub.2O in contact with the surface of the photoanode; CO.sub.2 in contact with the surface of the cathode; and a proton-conducting medium positioned between the photoanode and the cathode. Electrical charges associated with the protons and the electrons move from the photoanode to the cathode, driven in part by a chemical potential difference sufficient to drive the electrochemical reduction of CO.sub.2 at the cathode. A light beam is the sole source of energy used to drive chemical reactions. The photoanode can comprise TiO.sub.2 nanowires or nanotubes, and can also include WO.sub.3 nanowires or nanotubes, quantum dots of CdS or PbS, and Ag or Au nanostructures. The cathode can comprise a conductive gas diffusion layer with nanostructures of an electro-catalyst such as Cu or Co.

Chen, Bin↗
DOE OSTI2025

Machine learning informed rational design of high entropy double perovskite oxide universal air/steam electrodes for solid oxide electrochemical cells

Due to their high efficiency and versatility, solid oxide electrochemical cells (SOCs) are poised to play a significant role in future energy conversion and storage applications. In recent years, SOCs have bifurcated into two distinct categories: traditional oxygen-ion conducting SOCs that typically operate from ∼650—850 °C and the more recent proton-conducting ceramic (PCC) SOCs that typically operate from ∼400—650 °C. Current performance and lifetime of both oxygen-ion conducting SOCs and PCCs is primarily limited by the air/steam electrode, which facilitates the oxygen reduction reaction (ORR) during fuel cell operation and must also facilitate the oxygen evolution reaction (OER) during electrolysis operation. Here, we present a newly designed high-entropy double perovskite oxide suitable as a universal ORR/OER electrode for both oxygen-ion conducting SOCs and PCCs. Machine learning methods are applied to identify chemical descriptors for highly catalytic high-entropy double perovskite oxides (AA’B 2 O 6 ) across a large compositional space. Based on the machine-learning guidance, we ultimately converge on Ba 0.9 Cs 0.1 (Ca 0.2 Gd 0.2 La 0.2 Pr 0.2 Sr 0.2 )Co 1.5 Fe 0.5 O 6 (CsBaHEO) as a universal air/steam electrode. Structure stabilization is accomplished by an equimolar five-cation high-entropy composition on the A’-site, while cesium substitution on the A-site enhances the electrical conductivity and leads to a higher oxygen vacancy concentration. This material exhibits versatility and high performance in reversible oxygen-ion SOCs, reversible PCCs, and also large-scale tubular PCCs. For example, the CsBaHEO-based PCC reaches 1018 mW∙cm −2 at 600°C, while a large-scale tubular PCC using CsBaHEO for electrolysis achieves a hydrogen production rate of 21.314 ML∙min −1 at 600 °C.

Cell↗
DOE OSTI2021

Surface and Bulk Oxygen Kinetics of BaCo 0.4 Fe 0.4 Zr 0.2-X Y X O 3-δ Triple Conducting Electrode Materials

Triple ionic-electronic conductors have received much attention as electrode materials. In this work, the bulk characteristics of oxygen diffusion and surface exchange were determined for the triple-conducting BaCo 0.4 Fe 0.4 Zr 0.2-X Y X O 3-δ suite of samples. Y substitution increased the overall size of the lattice due to dopant ionic radius and the concomitant formation of oxygen vacancies. Oxygen permeation measurements exhibited a three-fold decrease in oxygen permeation flux with increasing Y substitution. The DC total conductivity exhibited a similar decrease with increasing Y substitution. These relatively small changes are coupled with an order of magnitude increase in surface exchange rates from Zr-doped to Y-doped samples as observed by conductivity relaxation experiments. The results indicate that Y-doping inhibits bulk O 2- conduction while improving the oxygen reduction surface reaction, suggesting better electrode performance for proton-conducting systems with greater Y substitution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2005

Mechanically Resilient Polymeric Films Doped with a Lithium Compound

This invention is a series of mechanically resilient polymeric films, comprising rod-coil block polyimide copolymers, which are doped with a lithium compound providing lithium ion conductivity, that are easy to fabricate into mechanically resilient films with acceptable ionic or protonic conductivity at a variety of temperatures. The copolymers consists of short-rigid polyimide rod segments alternating with polyether coil segments. The rods and coil segments can be linear, branched or mixtures of linear and branched segments. The highly incompatible rods and coil segments phase separate, providing nanoscale channels for ion conduction. The polyimide segments provide dimensional and mechanical stability and can be functionalized in a number of ways to provide specialized functions for a given application. These rod-coil black polyimide copolymers are particularly useful in the preparation of ion conductive membranes for use in the manufacture of fuel cells and lithium based polymer batteries.

Mary Ann B Meador↗
DOE OSTI2026

Porin-Inspired Ionomers with sub-nm Gated Ion Channels for High Ion Conductivity and Selectivity (Final Project Report (2026))

The physiological functions of living systems heavily rely on biological ion channels, whose malfunction can lead to disease. These channels enable selective and regulated transport of water, ions, or small molecules across membranes. Analogously, ionomers used in energy conversion and storage technologies govern ion transport within membrane separators and catalyst binder layers. This DOE Office of Science Early CAREER project aimed to achieve molecular-level control over ionic conductivity and ion permselectivity by translating the functionalities of biological, gated ion channels into a novel class of ion-conducting polymers (ionomers) incorporating macrocyclic calix[4]arene-based repeat units. The overarching goal was to establish fundamental design principles and elucidate proton conduction mechanisms through strategic design of macrocyclic calix[4]arene-containing ionomers, with close relevance to energy conversion and storage devices, including proton exchange membrane fuel cells (PEMFCs). The project leveraged sub-nm-sized macrocyclic pores to facilitate exceptionally fast ion transport (beneficial to addressing sluggish ORR kinetics of PEMFC electrodes) and achieve functionalities of ionic diodes under applied electrochemical fields, beneficial for selective transport/separation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

High-pressure electrical conductivity and elasticity of iron-bearing δ-AlOOH

Abstract The electrical conductivity and elasticity of deep hydrous phases are essential to constraining water distribution, as well as deciphering the origins of conductivity anomalies in the lower mantle. To uncover the impact of iron-bearing δ-AlOOH on the geophysical properties of the lower mantle, we carried out synchrotron X-ray diffraction and electrical conductivity measurements on δ-(Al0.52Fe0.48)OOH and (Al0.95Fe0.05)OOH in diamond-anvil cells at pressures up to 75 GPa at room temperature. A sharp volume reduction of ~6.5% was observed in δ-(Al0.52Fe0.48)OOH across the spin transition at 40.8–43.3 GPa, where its electrical conductivity increases steadily without abrupt changes. The electrical conductivity of δ-(Al0.52Fe0.48)OOH is greater than that of pure δ-AlOOH at high pressure, suggesting that both small polaron and proton conduction mechanisms dominate in iron-bearing δ-AlOOH. Furthermore, the high-pressure electrical conductivity profiles are comparable between δ-(Al0.95Fe0.05)OOH and δ-(Al0.52Fe0.48)OOH, indicating that high-iron content only marginally influences the conductivity of iron-bearing δ-AlOOH. Notably, the electrical conductivity of iron-bearing δ-AlOOH along the North Philippine geotherm is greater than the average 1D electrical conductivity profile in the mantle (Ohta et al. 2010a). This result suggests that δ-(Al,Fe)OOH is a promising candidate to account for high conductivity in some subducting slabs.

Geochemistry & Geophysics↗
DOE OSTI2025

Conformally coated scaffold design using water-tolerant Pr 1.8 Ba 0.2 NiO 4.1 for protonic ceramic electrochemical cells with 5,000-h electrolysis stability

Protonic ceramic electrochemical cells (PCECs) have potential as long-duration energy storage systems. However, their operational stability is limited under industrially relevant conditions due to the intrinsic chemical instability of doped barium cerate-based electrolytes and oxygen electrodes against H 2 O, as well as the poor electrode–electrolyte interfacial contact. Here, in this study, we present a conformally coated scaffold (CCS) design to comprehensively address these issues. A porous proton-conducting scaffold is constructed and conformally coated with Pr 1.8 Ba 0.2 NiO 4.1 electrocatalyst, which has high chemical stability against H 2 O, triple conductivity and hydration capability, and protects vulnerable electrolytes from H 2 O. The CCS structure consolidates the electrode–electrolyte interfacial bonding to enable fast proton transfer in the percolated network. This design enables PCECs to reach electrolysis stability for 5,000 h at −1.5 A cm−2 and 600 °C in 40% H 2 O. This work provides a general strategy to stabilize PCECs and offers guidance for designing resilient and stable solid-state energy storage systems.

Protonic ceramic electrochemical cell↗
DOE OSTI2021

Linking Perfluorosulfonic Acid Ionomer Chemistry and High-Current Density Performance in Fuel-Cell Electrodes

Transport phenomena are key in controlling the performance of electrochemical energy-conversion technologies and can be highly complex, involving multiple length scales and materials/phases. Material designs optimized for one reactant species transport however may inhibit other transport processes. We explore such trade-offs in the context of polymer-electrolyte fuel-cell electrodes, where ionomer thin films provide the necessary proton conductivity but retard oxygen transport to the Pt reaction site and cause interfacial resistance due to sulfonate/Pt interactions. We examine the electrode overall gas-transport resistance and its components as a function of ionomer content and chemistry. Low-equivalent-weight ionomers allow better dissolved-gas and proton transport due to greater water uptake and low crystallinity but also cause significant interfacial resistance due to the high density of sulfonic acid groups. These effects of equivalent weight are also observed via in situ ionic conductivity and CO displacement measurements. Of critical importance, the results are supported by ex situ ellipsometry and X-ray scattering of model thin-film systems, thereby providing direct linkages and applicability of model studies to probe complex heterogeneous structures. Structural and resultant performance changes in the electrode are shown to occur above a threshold sulfonic-group loading, highlighting the significance of ink-based interactions. Furthermore, our findings and methodologies are applicable to a variety of solid-state energy-conversion devices and material designs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

A New Electrode Paradigm Enabled by Co-Axial Electrospinning

A conventional electrode in a polymer electrolyte membrane fuel cell (PEMFC) often imposes competing requirements on the ionomer, which must enable efficient proton conduction while allowing sufficient oxygen transport. To address these material-level requirements, a co-axial electrospun electrode comprising of a pristine ionomer core and a multifunctional platinum-carbon-ionomer shell is introduced. By decoupling proton and oxygen transport pathways, this architecture enables independent tailoring of core and shell chemistries and their interfaces. The core-shell structure of the electrospun fibers is confirmed by microscopy, while electrochemical and transport properties are quantified using electrochemical impedance spectroscopy and limiting-current diagnostics. The co-axial fibers in their current version meet or exceed the performance of conventional ultrasonically sprayed electrode at relative humidities above 75%, enabled by improvements in non-Fickian diffusion processes. This work establishes co-axial electrospun electrodes as a versatile platform for advanced PEMFC electrodes and a wide range of electrochemical applications, including CO2 electrolysis, water electrolysis, and critical mineral separations.

08 HYDROGEN↗
DOE OSTI2023

Stochastic generation of electrolyzer anode catalyst layers

Here, we introduce a stochastic methodology to reproduce the complex pore structure observed in commercial iridium catalyst layers. This method preserves the α pore (pores smaller than 250 nm) and β pore (pores greater than or equal to 250 nm) regions of the catalyst layer. The morphology of the generated materials was validated by comparing the pore size distributions of generated materials against those obtained from commercial materials imaged using x-ray nano computed tomography. We further demonstrate that the pore size distributions of the generated materials are statistically indistinguishable from the imaged catalyst layers, indicating that the stochastic methodology is capable of accurately reproducing catalyst layer morphology. Pore network modelling was conducted on the generated catalyst materials to simulate single-phase permeability, electrical conductivity, and ionic conductivity, and these properties were found to be within experimentally measured ranges for electrolyzer catalyst layers. Additionally, simulations were performed on the generated materials with varying ionomer and iridium catalyst loadings. As the ionomer loading is added, proton conductivity increases exponentially, which demonstrates the importance of optimizing ionomer loading, considering that these effects will be exacerbated in the hydration and temperature conditions of operating electrolyzers. The stochastic material generation method presented in this work is a powerful tool for the development of novel low loading catalyst layers, where the effect of various structural parameters on electrolyzer performance characteristics can be explored.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Uncovering fast solid-acid proton conductors based on dynamics of polyanion groups and proton bonding strength

Achieving high proton conductivity in inorganic solids is key for advancing many electrochemical technologies, including low-energy nano-electronics and energy-efficient fuel cells and electrolyzers. A quantitative understanding of the physical traits of a material that regulate proton diffusion is necessary for accelerating the discovery of fast proton conductors. In this work, we have mapped the structural, chemical and dynamic properties of solid acids to the elementary steps of the Grotthuss mechanism of proton diffusion. Our approach combines ab initio molecular dynamics simulations, analysis of phonon spectra and atomic structure calculations. We have identified the donor–hydrogen bond lengths and the acidity of polyanion groups as key descriptors of local proton transfer and the vibrational frequencies of the cation framework as the key descriptor of lattice flexibility. The latter facilitates rotations of polyanion groups and long-range proton migration in solid acid proton conductors. The calculated lattice flexibility also correlates with the experimentally reported superprotonic transition temperatures. Using these descriptors, we have screened the Materials Project database and identified potential solid acid proton conductors with monovalent, divalent and trivalent cations, including Ag + , Sr 2+ , Ba 2+ and Er 3+ cations, which go beyond the traditionally considered monovalent alkali cations (Cs + , Rb + , K + , and NH 4 + ) in solid acids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Hydrogen Crossover Flux through Two-Dimensional Nanomaterials

Energy storage and conversion devices require an ion-exchange membrane with high transmission of charge-balancing ions and separation of anode and cathode electrolytes/gases. This ensures optimum device performance. Most conventional membranes suffer huge cross-permeation resulting in low energy efficiency and material degradation. This work investigated hydrogen permeability and proton transmission through membrane electrode assemblies (MEAs) containing a monolayer of hexagonal boron nitride and single-layer and bi-layer graphene in a gas-phase small-scale cell and a liquid cell. Here we found that the hydrogen crossover flux through MEAs with 2D materials was inhibited by at least a factor of 5 compared to the one without. Single-layer graphene and boron nitride enabled high proton transmission, but bi-layer graphene inhibited proton conduction. Defect visualization of 2D materials revealed few atomic-scale defects in graphene. These findings suggest that a monolayer of 2D material may provide good selectivity for energy conversion and storage devices by blocking species crossover while allowing high proton transmission.

2D materials↗
DOE OSTI2025

Real-Space Local Dynamics in 1,2,3-Triazole Using Inelastic Neutron Scattering

Enhancing proton transport in polymer electrolytes is crucial for advancing next-generation solid-state batteries, yet our understanding of proton conductivity in nonaqueous environments remains limited due to a lack of atomic-scale insights. Here, in this study, we investigated the atomic-scale dynamics of 1,2,3-triazole, a small molecule capable of dynamic hydrogen bonding, as a model system for proton hopping in nonaqueous environments. Using the real-space correlation function determined by the double Fourier transformation of inelastic neutron scattering spectra, we identified that the self-motion of protons and intermolecular dynamics occur on comparable time scales. Furthermore, we observed that the activation energy associated with the intermolecular dynamics matches the energy barrier for molecular rotations determined through Density Functional Theory calculations. These findings underscore the importance of controlling molecular dynamics at the atomic scale to control proton transport. Additionally, we demonstrated that intermolecular dynamics in systems involving protons can be studied using inelastic neutron scattering even without deuteration, thereby providing a broader avenue for studying atomic-scale dynamics in soft matter systems.

Shinohara, Yuya [Oak Ridge National Laboratory (OR↗