Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Process Scaling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Connecting particle interactions to agglomerate morphology and rheology of boehmite nanocrystal suspensions

Rheology imposes significant challenges on processing of complex suspensions such as nuclear waste slurries at the Hanford and Savannah River sites. Understanding rheology connecting to microstructures and underlying particle interactions in complex slurries is therefore important for both fundamental knowledge and practical applications. Here, we use suspensions of aluminum oxyhydroxide minerals in the form of boehmite as an analog of the radioactive waste slurry to gain physical insights on the correlation between particle interactions, microstructures, and slurry rheology. Specifically, we use a combination of Couette rheometry and small-angle scattering techniques (independently and simultaneously) to understand how the slurry microstructure changes under flow and how these structural changes manifest themselves in the bulk rheology of the suspensions. Our experiments show that the boehmite slurries are thixotropic, with the rheology and structure of the suspensions changing with increasing exposure to flow. In the slurries, particle aggregates begin as loose, system-spanning clusters, but exposure to moderate shear rates causes the aggregates to irreversibly consolidate into denser clusters of finite size. The microstructural changes directly influence the rheological properties of the slurries such as viscosity and viscoelasticity. More importantly, our study shows that solution pH affects the amount of structural rearrangement and the kinetics of the rearrangement process, with an increase in pH leading to faster and more dramatic changes in the bulk rheology. Such dynamic microstructural changes and resultant rheology are understood via correlations between particle interactions and strength of particle network, coupled with surface chemistry and anisotropic nature of particle interactions. Nearly identical structural changes are also observed in Poiseuille flow geometries, implying that the observed changes are relevant in the pipe flow conditions present during waste processing.

Weston, Javen S.↗
DOE OSTI2024

Magnetic resonance insights into the heterogeneous, fractal-like kinetics of chemically recyclable polymers

Moving toward a circular plastics economy is a vital aspect of global resource management. Chemical recycling of plastics ensures that high-value monomers can be recovered from depolymerized plastic waste, thus enabling circular manufacturing. However, to increase chemical recycling throughput in materials recovery facilities, the present understanding of polymer transport, diffusion, swelling, and heterogeneous deconstruction kinetics must be systematized to allow industrial-scale process design, spanning molecular to macroscopic regimes. To develop a framework for designing depolymerization processes, we examined acidolysis of circular polydiketoenamine elastomers. We used magnetic resonance to monitor spatially resolved observables in situ and then evaluated these data with a fractal method that treats nonlinear depolymerization kinetics. This approach delineated the roles played by network architecture and reaction medium on depolymerization outcomes, yielding parameters that facilitate comparisons between bulk processes. These streamlined methods to investigate polymer hydrolysis kinetics portend a general strategy for implementing chemical recycling on an industrial scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Windowless Optical Cell Flow System

One of the goals for advanced integrated nuclear safeguards is on-line optical analysis of molten salt in molten salt reactors and electrochemical fuel reprocessing facilities. While progress has been made in the development of optical techniques that may be suitable for on-line analysis of molten salts, significant technology gaps exist with regard to integrating these analytical techniques into industrial-scale processes. One key technological hurdle is the short service life of optical window materials, which are subject to clouding and scaling during extended exposure to molten salts. To address this issue, Argonne is developing a gravity flow cell with open-apertures to support on-line optical analysis without the need for salt-wetted windows. The flow cell uses gravity flow and fluid dynamics principles to enable molten salt flow through a pipe that has holes in its wall through which salt does not flow. In FY21, an open-aperture gravity flow cell with windowless optical access to flowing salt was successfully demonstrated. Future work should include the integration of the flow cell into a sampling loop, stakeholder outreach and collaboration, integration of multiple optical analysis techniques, evaluation of the integrated methods, and analyses to determine how the various tools might fit into an integrated safeguards monitoring system of unattended near real time monitoring tools.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Morphotype-resolved characterization of microalgal communities in a nutrient recovery process with ARTiMiS flow imaging microscopy

Microalgae-driven nutrient recovery represents a promising technology for phosphorus removal from wastewater while simultaneously generating biomass that can be valorized to offset treatment costs. As full-scale processes come online, system parameters including biomass composition must be carefully monitored to optimize performance and prevent culture crashes. In this study, flow imaging microscopy (FIM) was leveraged to characterize microalgal community composition in near real-time at a full-scale municipal wastewater treatment plant (WWTP) in Wisconsin, USA, and population and morphotype dynamics were examined to identify relationships between water chemistry, biomass composition, and system performance. Two FIM technologies, FlowCam and ARTiMiS, were evaluated as monitoring tools. ARTiMiS provided a more accurate estimate of total system biomass, and estimates derived from particle area as a proxy for biovolume yielded better approximations than particle counts. Deep learning classification models trained on annotated image libraries demonstrated equivalent performance between FlowCam and ARTiMiS, and convolutional neural network (CNN) classifiers proved significantly more accurate when compared to feature table-based dense neural network (DNN) models. Across a two-year study period, Scenedesmus spp. appeared most important for phosphorus removal, and were negatively impacted by elevated temperatures and increase in nitrite/nitrate concentrations. Chlorella and Monoraphidium also played an important role in phosphorus removal. For both Scenedesmus and Chlorella, smaller morphological types were more often associated with better system performance, whereas larger morphotypes likely associated with stress response(s) correlated with poor phosphorus recovery rates. Furthermore, these results demonstrate the potential of FIM as a critical technology for high-resolution characterization of industrial microalgal processes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Scalable and Quench-Free Processing of Metal Halide Perovskites in Ambient Conditions

With the rise of global warming and the growing energy crisis, scientists have pivoted from typical resources to look for new materials and technologies. Perovskite materials hold the potential for making high-efficiency, low-cost solar cells through solution processing of Earth-abundant materials; however, scalability, stability, and durability remain key challenges. In order to transition from small-scale processing in inert environments to higher throughput processing in ambient conditions, the fundamentals of perovskite crystallization must be understood. Classical nucleation theory, the LaMer relation, and nonclassical crystallization considerations are discussed to provide a mechanism by which a gellan gum (GG) additive—a nontoxic polymeric saccharide—has enabled researchers to produce quality halide perovskite thin-film blade coated in ambient conditions without a quench step. Furthermore, we report on the improved stability and durability properties inherent to these films, which feature improved morphologies and optoelectronic properties compared to films spin-coated in a glovebox with antisolvent. We tune the amount of GG in the perovskite precursor and study the interplay between GG concentration and processability, morphological control, and increased stability under humidity, heat, and mechanical testing. The simplicity of this approach and insensitivity to environmental conditions enable a wide process window for the production of low-defect, mechanically robust, and operationally stable perovskites with fracture energies among the highest obtained for perovskites.

14 SOLAR ENERGY↗
DOE OSTI2023

Science Plan for the Deployment of the Third ARM Mobile Facility to the Southeastern United States at the Bankhead National Forest, Alabama (AMF3 BNF)

In 2018, the U.S. Department of Energy (DOE) held a workshop for the Atmospheric Radiation Measurement (ARM) (Mather and Voyles 2013) user facility to discuss critical climate challenges and locations where key ARM Mobile Facility (AMF) observational assets could impact Earth system modeling (ESM). As an outcome, the southeast United States (SE U.S.) was identified as a high-priority region to target climate-process studies that promote a deeper understanding of the climate system and bolster ARM interactions with the community to drive ESM advancement. The DOE ARM user facility is a globally recognized leader in deploying and operating strategically located observation sites around the world for studying the properties of aerosols and clouds and their interaction with radiation, precipitation, and the Earth’s surface. In partnering with the DOE Atmospheric System Research (ASR) program, ARM solicited a multi-agency Site Science Team approach to provide input and close interaction with ARM management towards a successful SE U.S. deployment of the ARM third Mobile Facility (AMF3) (Miller et al. 2016). These efforts included identifying key locations, science drivers and instruments, and measurement strategies to address the wider climate-process needs and ESM improvement. Community input served a vital role in establishing, refining, and informing the relevant drivers and decisions regarding this AMF3 deployment. The team has identified Northern Alabama (N. AL) as regionally representative to unlock the key opportunities that will improve our understanding and model representation of aerosol, cloud, and land surface processes and their couplings in the SE U.S. A defining aspect of the AMF3 deployment is its commitment to long-term (anticipated five-year) observations to mitigate potential seasonal-to-annual variability that often limits appropriate attribution of phenomena to local or larger-scale processes. The proposed location may leverage nearby surface networks and multi-agency and partner assets to enrich this multi-year deployment. One motivation is to understand the role of spatiotemporal variability (thermodynamic, land-surface) across aspects of the climate system, with our AMF3 team anticipating future demands on characterizing the relationships between local-to-regional cloud development and surface processes across a diverse patchwork of natural, managed, and urban landscapes as found throughout the N. AL regions. The main site targets an intact, representative, forested region – the Bankhead National Forest (BNF) – underscoring further team commitment to regionally important land atmosphere two-way interactive studies “from the canopy to the clouds”, with enhanced tower instrumentation augmenting traditional ARM capabilities adjacent to this site. Multiple supplemental sites will also be distributed across this region, prioritizing added needs for biodiversity. Anticipated high-priority cloud science themes will target N. AL as a regional SE U.S. hotbed for high-impact weather, convective cloud onset, and shallow to-deep cloud transitioning. Anticipated aerosol drivers will focus on chemical processes that control the evolution of organic aerosol, the seasonality and spatial distribution of water vapor and particle-phase water, and its role on aerosol optical properties. Anticipated land atmosphere drivers consider the two-way feedbacks between surface influence on aerosols, clouds, and precipitation properties and the associated radiative impacts on plant physiology and canopy-scale fluxes. Emphasis will include the study of the impact of surface processes on aerosols via precursor emission, and on clouds via moisture flux and thermal development.

Doppler lidar, aerosols, convection↗
DOE OSTI2023

Science Plan for the Deployment of the Third ARM Mobile Facility to the Southeastern United States at the Bankhead National Forest, Alabama (AMF3 BNF)

In 2018, the U.S. Department of Energy (DOE) held a workshop for the Atmospheric Radiation Measurement (ARM) (Mather and Voyles 2013) user facility to discuss critical climate challenges and locations where key ARM Mobile Facility (AMF) observational assets could impact Earth system modeling (ESM). As an outcome, the southeast United States (SE U.S.) was identified as a high-priority region to target climate-process studies that promote a deeper understanding of the climate system and bolster ARM interactions with the community to drive ESM advancement. The DOE ARM user facility is a globally recognized leader in deploying and operating strategically located observation sites around the world for studying the properties of aerosols and clouds and their interaction with radiation, precipitation, and the Earth’s surface. In partnering with the DOE Atmospheric System Research (ASR) program, ARM solicited a multi-agency Site Science Team approach to provide input and close interaction with ARM management towards a successful SE U.S. deployment of the ARM third Mobile Facility (AMF3) (Miller et al. 2016). These efforts included identifying key locations, science drivers and instruments, and measurement strategies to address the wider climate-process needs and ESM improvement. Community input served a vital role in establishing, refining, and informing the relevant drivers and decisions regarding this AMF3 deployment. The team has identified Northern Alabama (N. AL) as regionally representative to unlock the key opportunities that will improve our understanding and model representation of aerosol, cloud, and land-surface processes and their couplings in the SE U.S. A defining aspect of the AMF3 deployment is its commitment to long-term (anticipated five-year) observations to mitigate potential seasonal-to-annual variability that often limits appropriate attribution of phenomena to local or larger-scale processes. The proposed location may leverage nearby surface networks and multi-agency and partner assets to enrich this multi-year deployment. One motivation is to understand the role of spatiotemporal variability (thermodynamic, land-surface) across aspects of the climate system, with our AMF3 team anticipating future demands on characterizing the relationships between local-to-regional cloud development and surface processes across a diverse patchwork of natural, managed, and urban landscapes as found throughout the N. AL regions. The main site targets an intact, representative, forested region – the Bankhead National Forest (BNF) – underscoring further team commitment to regionally important land-atmosphere two-way interactive studies “from the canopy to the clouds”, with enhanced tower instrumentation augmenting traditional ARM capabilities adjacent to this site. Multiple supplemental sites will also be distributed across this region, prioritizing added needs for biodiversity. Anticipated high-priority cloud science themes will target N. AL as a regional SE U.S. hotbed for high-impact weather, convective cloud onset, and shallow-to-deep cloud transitioning. Anticipated aerosol drivers will focus on chemical processes that control the evolution of organic aerosol, the seasonality and spatial distribution of water vapor and particle-phase water, and its role on aerosol optical properties. Anticipated land-atmosphere drivers consider the two-way feedbacks between surface influence on aerosols, clouds, and precipitation properties and the associated radiative impacts on plant physiology and canopy-scale fluxes. Emphasis will include the study of the impact of surface processes on aerosols via precursor emission, and on clouds via moisture flux and thermal development.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Full-Scale Hydrogen Mitigation Installation and Testing at Nevada Solar One

This project was performed under a Cooperative Research & Development Agreement (CRADA) between the National Renewable Energy Laboratory (NREL) and Acciona Energy USA (AE). The purpose was to advance an NREL TRL 3 technology that was developed during the previous CRADA from completed laboratory testing to full-scale process installation and testing at AE's Nevada Solar One (NSO) power plant. The project's objective was to complete full-scale implementation and performance verification of the NREL hydrogen mitigation technology at the Nevada Solar One (NSO) power plant in Boulder City, Nevada.

08 HYDROGEN↗
NASA NTRS1978

Microbial desulfurization of coal

Experiments indicate that several sulfur-oxidizing bacteria strains have been very efficient in desulfurizing coal. Process occurs at room temperature and does not require large capital investments of high energy inputs. Process may expand use of abundant reserves of high-sulfur bituminous coal, which is currently restricted due to environmental pollution. On practical scale, process may be integrated with modern coal-slurry transportation lines.

Dastoor, M. N.↗
NASA NTRS1988

Laboratory produced P/M aluminum 2XXX + Zr sheet

A laboratory-scale batch of aluminum alloy sheeting samples in the 2XXX + Zr system has been produced by P/M techniques in the T8X temper and subjected to tensile and Kahn tear property tests in both the longitudinal and long-transverse directions. The results obtained were compared to those of a NASA study concerning the same alloy powders; it appears that laboratory production-scale sheet-sample properties are good to excellent predictors of pilot-scale process products' tensile and tear notch toughness properties. The tear resistance toughness of the laboratory samples was not predictive of the pilot-scale products, however.

Royster, Dick M.↗
NASA NTRS2019

Solar Activity Modeling: From Subgranular Dynamical Scales to the Solar Cycles

The dynamical effects of solar magnetoconvection span a wide range spatial and temporal scales that extend from the interior to the corona and from fast turbulent motions to global magnetic activity. To study the solar activity on short temporal scales (from minutes to hours), we use 3D radiative MHD simulations that allow us to investigate complex turbulent interactions that drive various phenomena, such as plasma eruptions, spontaneous formation of magnetic structures, funnel-like structures and magnetic loops in the corona, and others. In particular, we focus on multi-scale processes of energy exchange across layers of the solar interior and atmosphere, which contribute to coronal heating and eruptive dynamics. For modeling global-scale activity, we use a data assimilation approach that has demonstrated great potential for building reliable long-term forecasts of solar activity. In particular, it has been shown that the Ensemble Kalman Filter (EnKF) method applied to the Parker-Kleeorin-Ruzmakin dynamo model is capable of predicting solar activity up to one sunspot cycle ahead in time, as well as estimating the properties of the next cycle a few years before it begins. In this presentation, using the available magnetogram data, we discuss development of the methodology and forecast quality criteria (including forecast uncertainties and sources of errors). We demonstrate the influence of observational limitations on prediction accuracy, and we present the EnKF predictions of the upcoming Solar Cycle (25) based on both the sunspot number series and observed magnetic fields and discuss the uncertainties and potential of the data assimilation approach for modeling and forecasting solar activity.

Kitiashvili, I. N.↗
DOE OSTI2021

Preferential hole defect formation in monolayer W Se 2 by electron-beam irradiation

Monolayer transition-metal dichalcogenides (TMDCs) have been extensively studied due to their wide range of physical properties and applications. It has been demonstrated that the electron beam in a transmission electron microscope (TEM) or scanning TEM (STEM) generates chalcogen vacancies that agglomerate into dispersed linelike or holelike defects. Here we employ a STEM electron beam and demonstrate that, in WSe 2 , beam-induced chalcogen vacancies initially form certain dispersed multivacancy structures, as seen in TMDCs in prior work. However, with suitable control of the STEM focused electron beam, these multivacancies gradually evolve into a dense network of ten-, 12-, 14-, and 16-member ring round holes, whereas the same process leads predominantly to chalcogen-vacancy line defects in other trigonal-prismatic TMDCs. Density functional theory calculations find that the underlying atomic-scale processes lead preferentially to defect structures that lower the total energy so that we are able to track the formation of the observed multivacancy complexes, which then lead to the formation of dense large round holes in WSe 2 . The same processes in WS 2 , however, are energetically unfavorable, while linear multivacancy defects are preferred, as observed. The demonstrated control of the formation of unique high-density round holes in WSe 2 has potential for applications such as atomic and molecular sieving.

36 MATERIALS SCIENCE↗
NASA NTRS2000

Monsoon-Enso Relationships: A New Paradigm

This article is partly a review and partly a new research paper on monsoon-ENSO relationship. The paper begins with a discussion of the basic relationship between the Indian monsoon and ENSO dating back to the work of Sir Gilbert Walker up to research results in more recent years. Various factors that may affect the monsoon-ENSO, relationship, including regional coupled ocean-atmosphere processes, Eurasian snow cover, land-atmosphere hydrologic feedback, intraseasonal oscillation, biennial variability and inter-decadal variations, are discussed. The extreme complex and highly nonlinear nature of the monsoon-ENSO relationship is stressed. We find that for regional impacts on the monsoon, El Nino and La Nina are far from simply mirror images of each other. These two polarities of ENSO can have strong or no impacts on monsoon anomalies depending on the strength of the intraseasonal oscillations and the phases of the inter-decadal variations. For the Asian-Australian monsoon (AAM) as a whole, the ENSO impact is effected through a east-west shift in the Walker Circulation. For rainfall anomalies over specific monsoon areas, regional processes play important roles in addition to the shift in the Walker Circulation. One of the key regional processes identified for the boreal summer monsoon is the anomalous West Pacific Anticyclone (WPA). This regional feature has similar signatures in interannual and intraseasonal time scales and appears to determine whether the monsoon-ENSO relationship is strong or weak in a given year. Another important regional feature includes a rainfall and SST dipole across the Indian Ocean, which may have strong impact on the austral summer monsoon. Results are shown indicating that monsoon surface wind forcings may induce a strong biennial signal in ENSO and that strong monsoon-ENSO coupling may translate into pronounced biennial variability in ENSO. Finally, a new paradigm is proposed for the study of monsoon variability. This paradigm provides a unified framework in which monsoon predictability, the role of regional vs. basin-scale processes, its relationship with different climate subsystems, and causes of secular changes in monsoon-ENSO relationship can be investigated.

Lau, K. M.↗
NASA NTRS1992

New inertial actuator provides isolation and stabilization in microgravity conditions

Experiments in materials and fluids processing have been conducted, or are planned, that take advantage of the low-g environment offered by space-based platforms. While the specific goals of the experiments vary, a common objective is to see improved results from the processes over those that would be obtained from similar ground-based experiments. While the space-based processing environment does offer a low-g environment, it is not disturbance free. Results of experiments already conducted, particularly those in manned vehicles, show that spacecraft induced disturbances still limit what can be achieved in materials processing. The duration of actual micro-g level environments is shorter than desired and periods of milli-g activity levels are not uncommon. While small scale experiments can be configured to overcome some of the vehicle disturbance sources, larger scale processing devices and commercial activities will require alternative methods to reduce the influences of spacecraft vibrations. Applied Technology Associates, Inc., (ATA), in cooperation with NASA Lewis Research Center, is developing hardware to provide a sustained micro-g experiment environment. This work is being sponsored under a Small Business Innovation Research (SBIR) program, which is currently in the Phase 2 development stage. ATA's approach is based on an inertial actuator, which when used as part of a closed-loop stabilization system, rejects unwanted disturbances to the experiment package. A prototype of the actuator has been fabricated and used in a laboratory demonstration to prove the principle of operation. ATA's presentation emphasized the development and testing of the Digital Materials Processing Experiment (DAMPER) inertial actuator. Physical and performance characteristics of the device are presented. Technical issues, including further optimization of the actuator's performance and plans for additional laboratory experiments, are also covered.

Blackburn, John↗
DOE OSTI2026

Iron as a driver of organic carbon fate in permafrost regions

Iron (Fe) and its biogeochemical interactions with organic carbon (OC) exert critical controls over carbon storage and water quality across Arctic and sub-Arctic landscapes. Permafrost thaw affects Fe–organic carbon interactions by exposing thawed material and driving shifts in hydrologic regimes. Here we propose a conceptual framework describing how Fe–OC interactions respond to permafrost thaw and the implications for global carbon cycling. The framework builds on current understanding of hydrologically driven processes that are altered by permafrost thaw, including microbial Fe reduction that influences OC decomposition and carbon emissions; Fe cycling through redox transformations and sulfide oxidation; dissolution and reprecipitation of Fe–OC assemblages; and Fe export to river networks. We put forward four testable hypotheses—on topics from Fe supply to its role in soil OC storage and transfer to rivers—to advance understanding of the coupled environmental controls on pore-scale reactions (that is, microscale reactions at mineral–water–microorganism interfaces) that are central to global Fe–OC cycling. Our framework highlights how soil-profile- and landscape-scale processes, such as hydrologic connectivity and redox dynamics, regulate pore-scale Fe–OC reactions.

Herndon, Elizabeth [ORNL] (ORCID:0000000291945493)↗
DOE OSTI2021

TEA Modeling to Quantify Economic Implications for Biorefinery Processing of Isolated Anatomical Fractions of Corn Stover

The Feedstock-Conversion Interface Consortium (FCIC; https://www.energy.gov/sites/prod/files/2020/01/f70/beto-fcic-overview-web.pdf), a collaboration of nine national laboratory partners, seeks to understand impacts of feedstock attributes on biorefinery performance. It is hypothesized that different individual anatomical fractions of corn stover vary in composition and recalcitrance, such that processing each fraction on its own through dedicated campaigns may enable better biorefinery economics overall relative to processing the whole stover material. This presentation focuses on techno-economic analysis (TEA) modeling to quantify the yield and cost ramifications for processing isolated anatomical fractions of corn stover through a low-temperature conversion biorefinery, reflecting a biochemical processing pathway consisting of biomass deconstruction through pretreatment and enzymatic hydrolysis, sugar fermentation and upgrading to hydrocarbon fuels, and lignin upgrading to value-added coproducts. Commercial-scale process simulation and economic evaluation leveraged experimental and analytical data from FCIC researchers for conversion of whole corn stover plus three individual anatomical fractions (cobs, husks, and stalks) across key steps of the conversion process. Our assessment found encouraging potential for biorefinery economic gains that may be achieved through this approach. TEA results indicated fuel yields varying from 29-44 gallons gasoline equivalent (GGE)/dry ton for the individual anatomical fractions compared to whole stover at 34 GGE/ton, equating to minimum fuel selling prices (MFSPs) between $6.37-$10.18/GGE for the fractions versus $8.76/GGE for whole stover (when lignin is burned), or $9.15-$15.19/GGE for the fractions versus $13.11/GGE for whole stover (when lignin is upgraded to coproducts, based on current experimental performance levels). Cobs and husks demonstrated the ability to achieve the highest fuel yields and lowest MFSPs, outperforming whole stover, while stalks led to the opposite result, as a composite reflection of compositional differences and process convertibility. Notably, even when taking the weighted average of the results reflecting each anatomical fraction weighted by its corresponding makeup of corn stover, this feasibility TEA screening supports feedstock cost allowances on the order of roughly $22-$29/ton as may reflect accommodating additional biomass fractionation equipment during feedstock pre-processing upstream of the conversion biorefinery gate to separate corn stover into such constituent fractions. Or viewed differently, the weighted average MFSP for the fractions was found to be $0.31-$0.32/GGE lower than the MFSP for the whole stover basis across either lignin scenario, when maintaining a fixed biomass feedstock cost. These findings highlight favorable implications for biorefinery economics as may be achieved by moving to a staged campaign approach for processing different corn stover fractions sequentially. Further opportunities exist for future work to fill in data gaps for remaining anatomical constituents (e.g. leaves) that were not included in the initial experimental studies, though are expected to maintain similar trends.

biochemical processing pathway↗
DOE OSTI2020

Process optimization of complex geometries using feed forward control for laser powder bed fusion additive manufacturing

Additive manufacturing (AM) enables the fabrication of complex designs that are difficult to create by other means. Metal parts manufactured by laser powder bed fusion (LPBF) can incorporate intricate design features and demonstrate desirable mechanical properties. However, printing a part that is qualified for its intended application often involves reprinting and discarding many parts to eliminate defects, improve dimensional accuracy, and increase repeatability. The process of iteratively converging on the appropriate build parameters increases the time and cost of creating functional LPBF manufactured parts. This work describes a fast, scalable method for part-scale process optimization of arbitrary geometries. Additionally, the computational approach uses feature extraction to identify scan vectors in need of parameter adaptation and applies results from simulation-based feed forward control models. This method provides a framework to quickly optimize complex parts through the targeted application of models with a range of fidelity and by automating the transfer of optimization strategies to new part designs. The computational approach and algorithmic framework are described, a software package is implemented, the method is applied to parts with complex features, and parts are printed on a customized open architecture LPBF machine.

3D printing↗